1508610_ATTACH.pdf
PDF 75 KB Posted
- Attached to
- F-16 Aircraft Wheel Assy - New Forging Required
- Solicitation number
- FA8203-15-R-0004
About this file
Special Packaging
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA820315R0004_______0001.pdf | ||
| 1355664_SQSS_NSN.pdf | ||
| 1349524_ATTACH_SQS_Forging.pdf | ||
| FA820315R0004.pdf | ||
| 1489875_ATTACH.pdf | ||
| 1508609_ATTACH.pdf | ||
| 1337888_EDL_REPORT.pdf | ||
| 1457540_ATTACH.pdf | ||
| 1273126_EI_Attach_A.pdf | ||
| 1457540_ATTACH_CDRL_First_Article.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES
EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
NOTICE 5: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.
NOTES
1. APPLY MIL-PRF-81322, CODE 02, TO BEARING RACE THEN COVER WITH REF.-3 AND SECURE WITH REF.-4.
2. PLACE PAD, REF.-2, IN THE BOTTOM OF CONTAINER.
3. PLACE WRAPPED WHEEL INTO CONTAINER AND PLACE PAD, REF.-2, ON TOP.
4. USE ADDITIONAL PADS, REF.-2, TO FILL VOIDS.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
File details come from the government source that posted it. Updated .