ECI_Capability_Demonstration_Drawing_Package_Distro_A_(004).pdf

Eddy Current Capability Demonstration Drawing Package

Distribution A: Approved for public release. Distribution Unlimited. Case Number: 88ABW-2018-6380

DETAIL A

SCALE 1 : 1

A

.4

.1

.2

TYP.

INTERPRET GEOMETRIC

2 1

A

B

A

B

2024-T3

TOLERANCING PER: STACKUP

DO NOT SCALE DRAWING

A-1

SHEET 1 OF 3

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

RA 16

FINISH

MATERIAL

KIT A: SPECIMEN

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL 0.01

THREE PLACE DECIMAL 0.010

0.196 THRU

1.

2 x

TY

P.

.0

0.250 THRU

.5

TY

P.

0.625

.6

1.500

1.

2.500

TY

P.

4.000

TYP.

0.

12 x

2.000

0.500

4 x 0.196 THRU

TOP

RIGHTLEFT

BOTTOM

PART ORIENTATION AS SEEN

FROM FRONT

NOTES:

1. MATERIAL: 2024-T3.

2. ALL 0.250 INCH HOLES MATCH DRILLED, REAMED, AND

LIGHT DEBURR.

3. HOLE TOLERANCE: 0.005 INCH.

4. TOLERANCE ALL OTHER DIMENSIONS: 0.010 INCH.

5. ASSEMBLY HOLES. MATCH DRILLED. #10-32 SOCKET

HEAD CAP SCREW WITH NUT INSTALLED, 4 PLACES.

6. ALL ENGRAVINGS 0.01 INCH DEEP.

7. ENGRAVING: 0.2 INCH NUMBERS, 6 PLACES.

8.

9.

ENGRAVING: 0.2 INCH LETTERS, 2 PLACES.

EACH COUPON SERIALIZED BY ENGRAVING ON PLATE

ENDS: AFRL-X-YYY-Z. X=KIT LETTER, YYY=PANEL NUMBER,

Z=LAYER. 0.09 INCH LETTERING, CENTERED.

10. SURFACE FINISH: RA 16 MICROINCH.

11. SURFACE NOTCHES ON FRONT SURFACE OF PANEL

AFRL-A-XXX-1 AND BACK SURFACE OF AFRL-A-XXX-3

SHALL BE FILLED WITH EPOXY AND SMOOTHED TO

SURFACE BEFORE BEING PRIMED.

12. 0.001 INCH (1 MIL) MIL-PRF-23377 PRIMER, 0.003 INCH (3

MIL) MAX MIL-PRF-85285 TOPCOAT ON FRONT SURFACE

OF AFRL-A-XXX-1 AND BACK SURFACE OF AFRL-A-XXX-3.

13. KIT A CONSISTS OF 10 TOTAL ASSEMBLIES.

14. EACH ASSEMBLY CONSISTS OF A STACK-UP OF 3 PANELS

FASTENED BY CAP SCREWS AND NUTS (SEE NOTE 5).

NOMENCLATURE FOR SERILIZATION IS DEFINED IN NOTE

9.

15. ASSEMBLY AFRL-A-006 CONTAINS NO NOTCHES. FOR

OTHER ASSEMBLIES, PANELS NOT SPECIFIED IN DWG. NO.

A-3 CONTAIN NO NOTCHES.

DETAIL D

SCALE 2 : 1

R0.030

UNLESS OTHERWISE SPECIFIED:

2 1

A

B

A

B

2024-T3

KIT A: NOTCHES

4RA 16

DO NOT SCALE DRAWING SHEET 2 OF 3

DWG. NO.

A-2

WEIGHT:

REV

SCALE: 1:2

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

FINISH

MATERIAL

INTERPRET GEOMETRIC

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL 0.01

THREE PLACE DECIMAL 0.010

B

B

CC

NOTES:

1. MATERIAL: 2024-T3.

2. HOLE EDM NOTCH LOCATIONS AND SIZES I.A.W.

SHEET A-3.

3. ALL EDM NOTCHES RADIAL (1:1 RATIO).

4. EDM NOTCHES. RADIAL DIMENSION TOLERANCE:

0.002 INCH.

5. EDM WIDTH: 0.005 INCH 0.001 INCH.

6. TOLERANCE ALL OTHER DIMENSIONS: 0.010 INCH.

270 90

ANGULAR LOCATION

AS SEEN FROM FRONT

EXAMPLE HOLE EDM NOTCH POSITIONS

NOTCH PANEL SURFACE ROW COLUMN ANGULAR

LOCATION RADIUS

26 AFRL-A-007-1 BACK 3 B 270 0.032

27 AFRL-A-007-2 FRONT 6 B 180 0.029

28 AFRL-A-007-3 FRONT 4 A 180 0.031

SECTION B-B

E

F

SECTION C-C

D

DETAIL E

SCALE 2 : 1

R0.030

DETAIL F

R0.030

A-3

A

B

A

B

KIT A: NOTCH

LOCATIONS AND

SIZES

DO NOT SCALE DRAWING

DWG. NO.

SHEET 3 OF 3SCALE: 1:2

INTERPRET GEOMETRIC

TOLERANCING PER:

WEIGHT:

REV

UNLESS OTHERWISE SPECIFIED:

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

FINISH

MATERIAL

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL

EXAMPLE HOLE EDM NOTCH POSITIONS

NOTCH PANEL SURFACE ROW COLUMN ANGULAR

LOCATION

RADIUS

1 AFRL-A-001-1 FRONT 1 B 90 0.070

2 AFRL-A-001-1 FRONT 2 A 180 0.006

3 AFRL-A-001-1 BACK 6 A 0 0.005

4 AFRL-A-001-2 FRONT 3 B 90 0.038

5 AFRL-A-001-2 BACK 4 A 270 0.014

6 AFRL-A-001-2 BACK 5 A 270 0.012

7 AFRL-A-001-2 BACK 5 B 180 0.040

8 AFRL-A-002-1 BACK 4 A 90 0.023

9 AFRL-A-002-3 FRONT 3 A 180 0.013

10 AFRL-A-003-1 FRONT 1 A 180 0.009

11 AFRL-A-003-1 FRONT 3 A 270 0.027

12 AFRL-A-003-2 FRONT 4 B 90 0.016

13 AFRL-A-003-2 FRONT 6 B 90 0.080

14 AFRL-A-003-2 BACK 6 A 180 0.044

15 AFRL-A-003-3 FRONT 2 B 90 0.007

16 AFRL-A-003-3 FRONT 5 B 180 0.034

17 AFRL-A-004-1 BACK 4 B 270 0.008

18 AFRL-A-004-2 FRONT 1 B 0 0.026

19 AFRL-A-004-2 BACK 5 A 270 0.017

20 AFRL-A-004-3 FRONT 5 B 90 0.028

21 AFRL-A-005-1 FRONT 1 A 180 0.011

22 AFRL-A-005-1 BACK 6 A 0 0.025

23 AFRL-A-005-2 FRONT 5 A 180 0.015

24 AFRL-A-005-2 BACK 3 A 0 0.024

25 AFRL-A-005-2 BACK 6 B 90 0.033

26 AFRL-A-007-1 BACK 3 B 270 0.032

27 AFRL-A-007-2 FRONT 6 B 180 0.029

28 AFRL-A-007-3 FRONT 4 A 180 0.031

29 AFRL-A-008-1 FRONT 6 B 270 0.046

30 AFRL-A-008-1 BACK 2 A 0 0.060

EXAMPLE HOLE EDM NOTCH POSITIONS

NOTCH PANEL SURFACE ROW COLUMN ANGULAR

LOCATION RADIUS

31 AFRL-A-009-1 BACK 2 A 180 0.050

32 AFRL-A-009-1 BACK 5 A 270 0.021

33 AFRL-A-009-2 FRONT 1 B 0 0.030

34 AFRL-A-009-2 BACK 3 B 180 0.018

35 AFRL-A-009-3 FRONT 2 B 180 0.022

36 AFRL-A-009-3 FRONT 6 A 270 0.020

37 AFRL-A-010-1 FRONT 1 A 180 0.042

38 AFRL-A-010-1 FRONT 2 B 270 0.036

39 AFRL-A-010-2 FRONT 1 B 90 0.019

40 AFRL-A-010-2 FRONT 2 A 90 0.010

FRONT

AS SEEN FROM

LEFT

BOTTOM

RIGHT

TOP

13.

12.

HI-LOCK FASTENERS (HL10VAP-8-3 PROTRUDING HEAD). HL-70 NUT PLATE TYP., 12 PLACES

NOTES:

MATERIAL: 2024-T3.1.

ALL 0.250 INCH HOLES REAMED AND LIGHT DEBURR.2.

0.250 INCH HOLE TOLERANCE: +0.005 INCH, -0.000 INCH, 12 PLACES.3.

MOUNTING HOLE TOLERANCE: 0.005 INCH, 2 PLACES.4.

TOLERANCE ALL OTHER DIMENSIONS: 0.010 INCH.5.

ALL ENGRAVINGS 0.01 INCH DEEP.6.

ENGRAVING: 0.2 INCH NUMBERS, 6 PLACES.7.

ENGRAVING: 0.2 INCH LETTERS, 2 PLACES.8.

EACH COUPON SERIALIZED BY ENGRAVING ON PLATE ENDS: AFRL-X-YYY X=KIT LETTER, YYY=PANEL NUMBER. 0.2 INCH LETTERING, CENTERED.9.

SURFACE FINISH: RA 1610.

NOTCHES SHALL BE FILLED WITH EPOXY AND SMOOTHED TO SURFACE BEFORE BEING PRIMED.11.

0.001 INCH (1 MIL) MIL-PRF-23377 PRIMER, 0.003 INCH (3 MIL) MAX MIL-PRF-85285 TOPCOAT ON FRONT, BACK, LEFT, AND RIGHT SURFACES.

PART ORIENTATION

TYP.

INTERPRET GEOMETRIC

2 1

A

B

A

B

2024-T3

KIT B: SPECIMENS

DO NOT SCALE DRAWING

B-1

SHEET 1 OF 5

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

RA 16

FINISH

MATERIAL

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL 0.01

THREE PLACE DECIMAL 0.010

0.196 THRU

4.000

2 x

.0

2.500

TY

P.

1.

TY

P.

0.250 THRU12x

0.625

1.

2.000

.3

C

SECTION A-A

2 1

A

B

A

B

2024-T3

KIT B: HOLE

NOTCHES

DO NOT SCALE DRAWING

B-2

SHEET 2 OF 5

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

RA 16

FINISH

MATERIAL

INTERPRET GEOMETRIC

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL 0.01

THREE PLACE DECIMAL 0.010

EXAMPLE HOLE EDM NOTCH POSITIONS

NOTCH PANEL ROW COLUMN ANGULAR

LOCATION RADIUS

47 AFRL-B-012 1 A 0 0.120

48 AFRL-B-012 5 A 0 0.028

49 AFRL-B-012 6 A 270 0.180

NOTES:

MATERIAL: 2024-T3.1.

HOLE EDM NOTCH LOCATIONS AND SIZES I.A.W. SHEET B-4.2.

ALL EDM NOTCHES RADIAL (1:1 RATIO).3.

EDM NOTCHES. RADIAL DIMENSION TOLERANCE: 0.002 INCH.4.

EDM WIDTH: 0.005 INCH 0.001 INCH.5.

TOLERANCE ALL OTHER DIMENSIONS: 0.010 INCH.6.

ANGULAR LOCATION

AS SEEN FROM FRONT

B

B

AA

DETAIL C

SCALE 2 : 1

R0.180

D

SECTION B-B

R0.120

DETAIL D

R0.028

.7

NOTES:

MATERIAL: 2024-T3.1.

EDGE EDM NOTCH LOCATIONS AND SIZES2.

I.A.W. SHEET B-5.

ALL EDM NOTCHES RADIAL (1:1 RATIO).3.

EDM NOTCHES. RADIAL DIMENSION4.

TOLERANCE: 0.002 INCH.

EDM WIDTH: 0.005 INCH 0.001 INCH.5.

TOLERANCE ALL OTHER DIMENSIONS:6.

0.010 INCH.

EXAMPLE EDGE EDM NOTCH POSITIONS

NOTCH PANEL SURFACE SIDE LOCATION RADIUS

36 AFRL-B-012 FRONT LEFT 6.500 0.175

37 AFRL-B-012 FRONT RIGHT 1.750 0.130

38 AFRL-B-012 BACK RIGHT 2.000 0.070

PART ORIENTATION AS

SEEN FROM FRONT

TOP

RIGHT

BOTTOM

LEFT

0.070

2 1

A

B

A

B

2024-T3

KIT B: EDGE

NOTCHES

DO NOT SCALE DRAWING

B-3

SHEET 3 OF 5

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

RA 16

FINISH

MATERIAL

INTERPRET GEOMETRIC

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL 0.01

THREE PLACE DECIMAL 0.010

0.175

0.130

F

F EE

SECTION E-E

R0.130

DETAIL G

SCALE 2 : 1

R0.070

G

SECTION F-F

R0.175

2 1

A

B

A

B

KIT B: HOLE NOTCH

LOCATIONS

DO NOT SCALE DRAWING

B-4

SHEET 4 OF 5

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

FINISH

MATERIAL

INTERPRET GEOMETRIC

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL

HOLE EDM NOTCH POSITIONS

NOTCH PANEL ROW COLUMN ANGULAR

LOCATION RADIUS

1 AFRL-B-001 1 A 180 0.270

2 AFRL-B-001 1 B 270 0.125

3 AFRL-B-001 2 B 0 0.110

4 AFRL-B-001 3 B 180 0.145

5 AFRL-B-001 4 B 270 0.005

6 AFRL-B-001 5 A 180 0.060

7 AFRL-B-001 6 B 0 0.240

8 AFRL-B-002 1 A 90 0.190

9 AFRL-B-002 1 B 270 0.105

10 AFRL-B-002 2 A 180 0.170

11 AFRL-B-002 3 A 0 0.050

12 AFRL-B-003 2 A 90 0.045

13 AFRL-B-003 3 A 0 0.095

14 AFRL-B-003 4 A 90 0.023

15 AFRL-B-003 5 A 90 0.038

16 AFRL-B-003 6 A 0 0.010

17 AFRL-B-004 2 A 180 0.020

18 AFRL-B-004 2 B 90 0.025

19 AFRL-B-005 1 B 90 0.013

20 AFRL-B-005 5 B 90 0.200

21 AFRL-B-006 1 A 90 0.330

22 AFRL-B-006 3 B 0 0.260

23 AFRL-B-007 1 A 0 0.100

24 AFRL-B-007 1 B 180 0.080

25 AFRL-B-007 3 B 0 0.290

26 AFRL-B-007 4 A 180 0.250

27 AFRL-B-007 4 B 270 0.030

28 AFRL-B-007 5 A 270 0.055

29 AFRL-B-007 6 B 180 0.048

30 AFRL-B-008 3 A 270 0.320

31 AFRL-B-008 4 A 0 0.165

32 AFRL-B-008 5 A 90 0.185

33 AFRL-B-008 5 B 0 0.195

34 AFRL-B-008 6 A 180 0.360

35 AFRL-B-008 6 B 180 0.230

36 AFRL-B-009 1 A 0 0.115

37 AFRL-B-009 3 B 180 0.140

38 AFRL-B-009 4 B 180 0.175

39 AFRL-B-009 5 B 0 0.160

40 AFRL-B-010 1 A 90 0.043

41 AFRL-B-010 3 A 90 0.340

42 AFRL-B-010 3 B 90 0.090

HOLE EDM NOTCH POSITIONS

NOTCH PANEL ROW COLUMN ANGULAR

LOCATION RADIUS

43 AFRL-B-011 1 A 0 0.220

44 AFRL-B-011 5 B 180 0.135

45 AFRL-B-011 6 A 0 0.070

46 AFRL-B-011 6 B 270 0.300

47 AFRL-B-012 1 A 0 0.120

48 AFRL-B-012 5 A 0 0.028

49 AFRL-B-012 6 A 270 0.180

50 AFRL-B-013 1 A 270 0.085

51 AFRL-B-013 2 B 180 0.155

52 AFRL-B-013 3 B 180 0.210

53 AFRL-B-013 4 A 0 0.130

54 AFRL-B-013 5 A 90 0.075

55 AFRL-B-013 6 A 0 0.035

56 AFRL-B-013 6 B 180 0.280

57 AFRL-B-014 1 A 90 0.015

58 AFRL-B-014 1 B 270 0.065

59 AFRL-B-014 4 B 90 0.018

60 AFRL-B-014 5 B 180 0.040

61 AFRL-B-014 6 A 180 0.008

62 AFRL-B-015 3 A 180 0.150

63 AFRL-B-015 5 A 0 0.310

64 AFRL-B-015 5 B 90 0.350

65 AFRL-B-015 6 A 0 0.033

EDGE EDM NOTCH POSITIONS

NOTCH PANEL SURFACE SIDE LOCATION RADIUS

1 AFRL-B-001 FRONT LEFT 2.500 0.020

2 AFRL-B-001 FRONT LEFT 6.500 0.230

3 AFRL-B-001 BACK LEFT 6.750 0.110

4 AFRL-B-001 BACK RIGHT 4.500 0.065

5 AFRL-B-002 FRONT LEFT 3.500 0.160

6 AFRL-B-002 FRONT RIGHT 5.250 0.145

7 AFRL-B-002 FRONT RIGHT 5.750 0.180

8 AFRL-B-002 FRONT RIGHT 6.000 0.090

9 AFRL-B-002 BACK LEFT 2.750 0.220

10 AFRL-B-003 FRONT LEFT 3.750 0.010

11 AFRL-B-003 FRONT RIGHT 2.250 0.240

12 AFRL-B-003 BACK LEFT 1.750 0.165

13 AFRL-B-003 BACK LEFT 5.250 0.155

14 AFRL-B-004 FRONT LEFT 5.750 0.075

15 AFRL-B-004 FRONT RIGHT 2.250 0.030

16 AFRL-B-004 BACK RIGHT 7.000 0.005

17 AFRL-B-005 FRONT LEFT 2.500 0.080

18 AFRL-B-005 BACK RIGHT 6.250 0.105

19 AFRL-B-006 FRONT RIGHT 2.250 0.050

20 AFRL-B-006 FRONT RIGHT 4.250 0.210

21 AFRL-B-006 BACK LEFT 6.250 0.185

22 AFRL-B-007 FRONT LEFT 4.250 0.115

23 AFRL-B-007 FRONT RIGHT 1.500 0.045

24 AFRL-B-007 FRONT RIGHT 2.500 0.015

25 AFRL-B-007 BACK LEFT 3.250 0.055

26 AFRL-B-007 BACK LEFT 4.500 0.060

27 AFRL-B-008 BACK LEFT 4.500 0.140

28 AFRL-B-009 FRONT RIGHT 7.000 0.035

29 AFRL-B-009 BACK RIGHT 1.750 0.085

30 AFRL-B-009 BACK RIGHT 6.250 0.095

EDGE EDM NOTCH POSITIONS

NOTCH PANEL SURFACE SIDE LOCATION RADIUS

31 AFRL-B-010 FRONT LEFT 4.500 0.120

32 AFRL-B-010 FRONT LEFT 5.500 0.025

33 AFRL-B-010 FRONT RIGHT 5.250 0.135

34 AFRL-B-010 FRONT RIGHT 6.000 0.150

35 AFRL-B-011 BACK RIGHT 1.250 0.125

36 AFRL-B-012 FRONT LEFT 6.500 0.175

37 AFRL-B-012 FRONT RIGHT 1.750 0.130

38 AFRL-B-012 BACK RIGHT 2.000 0.070

39 AFRL-B-013 FRONT LEFT 3.250 0.170

40 AFRL-B-013 FRONT RIGHT 5.750 0.195

41 AFRL-B-014 BACK RIGHT 1.250 0.190

42 AFRL-B-014 BACK RIGHT 3.500 0.200

43 AFRL-B-015 FRONT LEFT 6.750 0.250

44 AFRL-B-015 FRONT RIGHT 5.750 0.100

45 AFRL-B-015 BACK LEFT 4.750 0.040

2 1

A

B

A

B

KIT B: EDGE NOTCH

LOCATIONS

DO NOT SCALE DRAWING

B-5

SHEET 5 OF 5

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

FINISH

MATERIAL

INTERPRET GEOMETRIC

TOLERANCING PER:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL

.3

HI-LOCK FASTENERS (HL11VAP-8-3 COUNTERSINK HEAD). HL-70 NUT PLATE TYP., 12 PLACES.

FRONT

AS SEEN FROM

PART ORIENTATION

TOP

RIGHT

BOTTOM

LEFT

13.

NOTES:

MATERIAL: 2024-T3.1.

ALL 0.250 INCH HOLES REAMED AND LIGHT DEBURR.2.

HOLE TOLERANCE: +0.005, -0.000 INCH, 12 PLACES.3.

MOUNTING HOLE TOLERANCE: 0.005 INCH, 2 PLACES.4.

TOLERANCE ALL OTHER DIMENSIONS: 0.010 INCH.5.

ALL ENGRAVINGS 0.010 INCH DEEP.6.

ENGRAVING: 0.2 INCH NUMBERS, 6 PLACES.7.

ENGRAVING: 0.2 INCH LETTERS, 2 PLACES.8.

EACH COUPON SERIALIZED BY ENGRAVING ON PLATE ENDS: AFRL-X-YYY X=KIT LETTER, YYY=PANEL NUMBER. 0.2 9.

INCH LETTERING, CENTERED.

SURFACE FINISH: RA 16. 10.

NOTCHES SHALL BE FILLED WITH EPOXY AND SMOOTHED TO SURFACE BEFORE BEING PRIMED. 11.

0.001 INCH (1 MIL) MIL-PRF-23377 PRIMER, 0.003 INCH (3 MIL) MAX MIL-PRF-85285 TOPCOAT ON FRONT SURFACE.12.

INTERPRET GEOMETRIC

2 1

A

B

A

B

2024-T3

TOLERANCING PER: SPECIMENS

DO NOT SCALE DRAWING

C-1

SHEET 1 OF 3

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

RA 16

FINISH

MATERIAL

KIT C:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL 0.01

THREE PLACE DECIMAL 0.010

2.500

4.000

TY

P.

1.

TY

P.

1.

0.625

0.416 X 82°

0.196 THRU ALL2 x

0.396 X 100°

12 x 0.250 THRU ALL

2.000

ANGULAR LOCATION

AS SEEN FROM FRONT

EXAMPLE HOLE EDM NOTCH POSITIONS

NOTCH PANEL ROW COLUMN ANGULAR

LOCATION RADIUS

56 AFRL-C-010 2 A 270 0.226

57 AFRL-C-010 2 B 270 0.319

58 AFRL-C-010 3 A 90 0.137

59 AFRL-C-010 3 B 180 0.231

60 AFRL-C-010 6 A 180 0.358

NOTES:

MATERIAL: 2024-T3.1.

HOLE EDM NOTCH LOCATIONS AND SIZES I.A.W.2.

SHEET C-3.

ALL EDM NOTCHES RADIAL (1:1 RATIO).3.

EDM NOTCHES. RADIAL DIMENSION TOLERANCE:4.

0.002 INCH.

EDM WIDTH: 0.005 INCH 0.001 INCH.5.

TOLERANCE ALL OTHER DIMENSIONS: 0.010 INCH.6.

INTERPRET GEOMETRIC

2 1

A

B

A

B

2024-T3

TOLERANCING PER: NOTCHES

DO NOT SCALE DRAWING

C-2

SHEET 2 OF 3

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

RA 16

FINISH

MATERIAL

KIT C: HOLE

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL 0.01

THREE PLACE DECIMAL 0.010

DETAIL D

SCALE 2 : 1

R0.137

AA

BB

C

C

SECTION A-A

R0.226 R0.319

SECTION B-B

D

SECTION C-C

R0.358

R0.231

EXAMPLE HOLE EDM NOTCH POSITIONS

NOTCH PANEL ROW COLUMN ANGULAR

LOCATION RADIUS

EQUIV. FREE

SURFACE

LENGTH

1 AFRL-C-001 1 B 90 0.117 0.028

2 AFRL-C-001 3 A 0 0.197 0.115

3 AFRL-C-001 4 A 0 0.126 0.038

4 AFRL-C-001 5 A 180 0.174 0.090

5 AFRL-C-002 1 A 180 0.111 0.020

6 AFRL-C-002 1 B 270 0.160 0.075

7 AFRL-C-002 2 B 90 0.135 0.048

8 AFRL-C-002 3 A 180 0.101 0.008

9 AFRL-C-002 6 A 90 0.133 0.045

10 AFRL-C-002 6 B 90 0.348 0.270

11 AFRL-C-003 1 B 90 0.309 0.230

12 AFRL-C-003 4 B 180 0.105 0.013

13 AFRL-C-004 1 B 180 0.388 0.310

14 AFRL-C-004 5 A 0 0.142 0.055

15 AFRL-C-005 2 A 0 0.289 0.210

16 AFRL-C-005 3 A 0 0.255 0.175

17 AFRL-C-005 4 A 90 0.169 0.085

18 AFRL-C-005 4 B 0 0.270 0.190

19 AFRL-C-005 5 A 270 0.216 0.135

20 AFRL-C-005 5 B 0 0.151 0.065

21 AFRL-C-006 1 A 0 0.338 0.260

22 AFRL-C-006 1 B 270 0.378 0.300

23 AFRL-C-006 2 A 90 0.260 0.180

24 AFRL-C-006 2 B 270 0.130 0.043

25 AFRL-C-006 3 A 90 0.212 0.130

26 AFRL-C-006 3 B 0 0.299 0.220

27 AFRL-C-006 4 B 90 0.245 0.165

28 AFRL-C-006 5 A 0 0.221 0.140

29 AFRL-C-007 1 A 180 0.328 0.250

30 AFRL-C-007 1 B 90 0.103 0.010

EXAMPLE HOLE EDM NOTCH POSITIONS

NOTCH PANEL ROW COLUMN ANGULAR

LOCATION RADIUS

EQUIV. FREE

SURFACE

LENGTH

31 AFRL-C-007 2 A 90 0.188 0.105

32 AFRL-C-007 2 B 90 0.241 0.160

33 AFRL-C-007 3 A 90 0.368 0.290

34 AFRL-C-007 4 A 270 0.250 0.170

35 AFRL-C-007 5 A 270 0.164 0.080

36 AFRL-C-007 6 B 270 0.099 0.005

37 AFRL-C-008 1 A 0 0.128 0.040

38 AFRL-C-008 1 B 270 0.122 0.033

39 AFRL-C-008 2 A 180 0.119 0.030

40 AFRL-C-008 2 B 0 0.155 0.070

41 AFRL-C-008 3 A 270 0.109 0.018

42 AFRL-C-008 4 B 90 0.193 0.110

43 AFRL-C-008 5 A 0 0.113 0.023

44 AFRL-C-008 5 B 270 0.178 0.095

45 AFRL-C-008 6 A 0 0.236 0.155

46 AFRL-C-008 6 B 90 0.146 0.060

47 AFRL-C-009 1 A 0 0.275 0.195

48 AFRL-C-009 2 A 90 0.202 0.120

49 AFRL-C-009 3 A 90 0.265 0.185

50 AFRL-C-009 3 B 0 0.183 0.100

51 AFRL-C-009 4 A 180 0.207 0.125

52 AFRL-C-009 4 B 180 0.279 0.200

53 AFRL-C-009 5 A 0 0.107 0.015

54 AFRL-C-009 5 B 180 0.115 0.025

55 AFRL-C-009 6 B 0 0.124 0.035

56 AFRL-C-010 2 A 270 0.226 0.145

57 AFRL-C-010 2 B 270 0.319 0.240

58 AFRL-C-010 3 A 90 0.137 0.050

59 AFRL-C-010 3 B 180 0.231 0.150

60 AFRL-C-010 6 A 180 0.358 0.280

TOLERANCING PER:

2 1

A

B

A

B

INTERPRET GEOMETRIC AND SIZES

DO NOT SCALE DRAWING

C-3

SHEET 3 OF 3

UNLESS OTHERWISE SPECIFIED:

SCALE: 1:2 WEIGHT:

REVDWG. NO.

A

SIZE

TITLE:

NAME DATE

COMMENTS:

Q.A.

MFG APPR.

ENG APPR.

CHECKED

DRAWN

FINISH

MATERIAL

NOTCH LOCATIONS

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL