SOW-Final.pdf

STATEMENT OF WORK

FOR

Wright Line Lab Workbenches

AFMC OC-ALC/OBCA

6 APRIL 2017

Wright Line Workbenches

Item Description: Lab Workbenches

Scope:

The Contractor shall provide all labor, tools, equipment, material, parts, quality control and transportation necessary to install twenty (20) Wright Line Lab Workbenches in building 9001 for the Oklahoma City- Air Logistics Complex (OC-ALC), at Tinker Air Force Base (TAFB) The Contractor shall also provide Personal Protective Equipment (PPE) and cloth-ing, to include reflective clothing (belt, vest, etc); hearing and eye protection, to include pre-scription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Statement of Work (SOW).

The Contractor shall be responsible for insuring all services, parts and components provided under this contract are in IAW the terms and conditions outlined in this SOW.

Item Description:

Twenty (20) Wright Line Lab Workbenches shall be installed in Building 9001 in the B9001 SMXG Laboratory. A description of the workbenches is listed below.

1. 72 X 60 Full Frame, Steel: Black

2. 72" Upright, 40"D, Steel: Black

3. 60" Mobile Base, 40"D, Steel: Black

4. 60 High Cap Ws 36 Deep, Steel: Black - Laminate: Silver (Black Trim)

5. 60" Electronic Shelf/11.9", Steel: Black

6. 36" Task Light for 42" + Shelving, Steel: Black

7. Slatwall Module for 30" Frames, Steel: Black

8. Fpd Arm-Sw Hght Adj Single Fpd Black, Centris Head

9. 60" Lab Pwr Wire Mgt, Steel: Black

10. Epdu 16A L5-20/5-20P

11. 60" Horiz Cm Kit, Steel: Black

12. Top Access Cm Brkts, Steel: Black

13. 60" Tower Shelf/11.9", Steel: Black

14. Pen Cup

15. Accessory Tray

Background:

This project includes the delivery and installation of twenty (20) Wright Line Lab Work-benches. These brands of benches/workstations are currently in use and will allow all SMXG labs to maintain continuity of style, design and operational functionality.

Wright Line Workbenches

Requested Services:

Purchase, delivery and installation of twenty (20) Wright Line Lab Workbenches for the SMXG Labs located in Building 9001. The Contractor shall assemble and install twenty Wright Line Work benches/stations over a period of (10) ten days. The workbenches will be built in the B9001 cages and rolled into their respective locations. The Contractor shall be responsible for the removal of all debris.

Hours of Operation:

The Contractor shall perform the work required under this contract during the following days and hours: Monday through Friday, 8:00am till 4:00pm. These dates and hours exclude Fed-eral Holidays, base closures due to inclement weather, and furlough days, as applicable.

Emergency Procedures:

The Contractor personnel shall follow the direction of the Government personnel with regard to emergency procedures, such as fire, tornado, active shooter, bomb threats, or other emer-gency. It is the responsibility of the Contractor to provide guidance and to establish proce-dures for its employees to respond to an emergency. It is the Contractor’s responsibility to account for their employees following an emergency evacuation. The Contractor personnel shall participate with the Government personnel in all fire and tornado drills at no additional cost to the Government.

Health & Safety on Government Installations:

While performing work under this contract the Contractor shall comply with all applicable federal, state and local regulations regarding occupational safety and health. During the exe-cution of the contract, the Contractor shall notify the CO, COR, and Government Contract Administrator (CA) within one (1) business day of any damage to Government property in which the dollar value exceeds $500,000.00 and within two (2) work days, for any damage to Government property less than $500,000.00.

Mishap notifications shall contain, as a minimum, the following information:

• Contract, Contract Number, Name and Title of Person(s) Reporting

• Date, Time and exact location of accident/incident

• Brief Narrative of accident/incident (Events leading to accident/incident)

• Cause of accident/incident, if known

• Estimated cost of accident/incident (material and labor to repair/replace)

• Nomenclature of equipment and personnel involved in accident/incident

• Corrective actions (taken or proposed)

• Other pertinent information

If requested by the designated CO, the Contractor shall immediately secure the mishap sce-ne/damaged property and impound pertinent maintenance and training records, until released by the Procuring Safety Office. Contractors will not dispose of contract data related to a mishap until notified to do so by the CO.