Equipment_Health_Checklist_V6.pdf

Equipment Health Assessment Checklist Equipment Description: ___________________________________________Date:_______________________

Equipment Location: ________________________Equipment Number (If Available):_____________________

Auditor Name(s)/Org: ________________________________________________________________________

Equipment Health Assessment Yes No N/A Pass Fail Infrared/ Motor analysis:

Infrared scan electric panels, motors and extreme temperature components?

Motor analysis/baseline done & acceptable?

Motor(s) rotation marked and in correct direction?

Stroboscope:

Belts, couplings and/or chains observed & acceptable?

Other rotating/moving components observed & acceptable?

Vibration:

Overall vibrations levels checked & acceptable?

Accelerometers or accelerometer pads installed?

Alignment:

Belts, shafts, pulleys and couplings checked?

Machine Level?

Ultrasound:

Piping scanned for leaks?

Equipment scanned for abnormal noise?

Oil/Grease/Fluids:

Are all lubricants checked and verified for correct type?

Are all grease and lube fittings labeled for correct type?

Are all fluid reservoirs labeled for fluid type and amount?

Safety:

Does equipment have safety guards over belts/chains/rotating equipment?

Are pinch points marked and/or guarded?

Does equipment have functioning e-stop device?

Are stored energy sources isolated in the event of equipment failure?

Are isolation valves for steam, air, water, etc included and labeled?

Is the load center panel easily accessible and marked with equipment information?

Installation:

Is equipment installed as per manufacturer’s recommendations?

Check for ease of maintainability (piping unions included, clearance for panel/cabinet doors opening, motor access, shut off valves for utilities, access platforms,…etc)?

If equipment is designed for a fixed location, is it securely anchored?

Operational Check:

Operational check performed?

Does equipment function as required?

Is an operator or engineer present for operational check and POC information provided? Operator:__________________ Engineer:________________________ Results/Comments: 76 MXSS/MXDEA RCM TEAM LEAD:______________________________________________________________