SOW coated baskets

STATEMENT OF WORK

REQUIREMENTS

FOR

COATED BASKETS

25 Aug 2011

SCOPE:

The contractor shall provide a total of forty-one coated baskets that will allow for safe cleaning and preservation of engine bearings. The basket sizes shall be as follows:

-Twenty-seven baskets of outer dimensions 17”L x 12”W x 3”H, -Eight baskets of outer dimensions 18”L x 14”W x 3”h, and

-Six baskets of outer dimensions 19”L x 19”W x 3”H.

The baskets shall be constructed of stainless steel rod (approximately 5/16” Dia.) and lined with stainless steel wire mesh (~0.063” Dia. wire with ~0.437” openings). The baskets shall be coated with Halar fluoropolymer to prevent metal-to-metal contact with the bearings. The baskets shall also contain handles so that they can be carried by shop personnel. The handles may extend upward a maximum of 6” above the top of the basket, but shall not extrude outward of the maximum width and length of the basket.

All items shall be delivered to 3001 Staff Drive Post P77 Tinker AFB, OK 73145; Attn: James Wickersham.

ACCEPTANCE:

After the award of contract the awardee must submit 1 each of line item 0001, 0002 and 0003 to the governmenst point of contact no later than 30 days after reciept of award in order for the government to examine, evaluate, test and approve/disapprove. The government shall examine, evaluate, test and approve/disapprove within 10 days of items being received. If approved the government shall notify the awardee via e-mail and the awardee shall have 30 day to produce and ship the remaining quantites for CLIN 0001, 0002 and 0003. If disapproved the government shall notify the awardee and the awardee shall have 10 days to correct and resubmit the items to the government. If the contractor is unable to properly meet the specifications provided by the above criteria, the item(s) will be taken back by the contractor with no charge given to the government.