Standardized_Tooling_-_Item_Description.pdf

DEPARTMENT OF THE AIR FORCE

OKLAHOMA CITY AIR LOGISTICS COMPLEX (OC-ALC)

TINKER AIR FORCE BASE OKLAHOMA

31 October 2018

Item Description

Iscar or Equivalent Standardized Tooling

CLIN

Brand Description Item Designation Part Number/Catalog Ref#

Qty. Salient Characteristics

1 Iscar 3/8" MultiMaster Shank

MM S-A-L4.75-C.375-T06-C

(shank)

3103093 14 .375" carbide shank , 4.750" OAL, reduced neck to .364" dia to a length of 1.950" with the MultiMaster T06 connection.

2 Iscar 3/4"Multi-Master Shank

MM S-A-L5.50-C.750-T12-C

(shank)

3103843 14 Coolant through 0.750" diameter carbide shank , 5.500" OAL, reduced neck to .720" dia to a length of 2.930" with the MultiMaster T12 connection.

3 Iscar 1" Multi-Master Shank

MM S-A-L7.00-C1.00-T15

(shank)

3105424 14 Coolant through 1.000" diameter steel shank , 7.00" OAL, reduced neck to .940" dia to a length of 2.40" with the MultiMaster T15 connection.

4 Iscar 3/4" High Feed Head

FF EWX D0.75-3-MMT12-

04 (HF)

3105634 14 Coolant through endmill body. Multimaster T12 connection.

Holds three (3) WXCU inserts with six (6) cutting edges.

0.460"-0.750" cutting diameter, 0.030" DOC, and 1.540" overall length.

5 Iscar 1" Carbide Multi- Master Shank

MM S-A-L10.00-C1.00-T15-

C

3105415 7 Coolant through 1.000" diameter carbide shank , 10.00" OAL, reduced neck to .940" dia to a length of 2.40" with the MultiMaster T15 connection.

6 Iscar 1" High Feed Head MM

FF EWX D25-4-MMT15-04

(HF)

3106376 14 Coolant through endmill body. Multimaster T15 connection.

Holds four(4) screw clamped WXCU inserts with six (6) cutting edges. 0.693"-0.984" cutting diameter, 0.031" DOC, and 1.85" overall length.

7 Iscar 4" 50° Face Mill IQ845 FSY D4.0-07-1.50- R07

3106551 7 Coolant through face mill body. Arbor hole style B. Holds seven (7) screw clamped SHYU inserts each with eight (8) cutting edges. 0.180" DOC, minimum cut diameter 4", and 2" overall length. Accommodates inserts available with ground and polished edge or t-land and hone for steel and SS. Rigid dove tail clamping. Positive pocket orientation.

8 Iscar 4" 90° Face Mill HM390 FTD D4.00-8-1.5-15 3106566 7 Coolant through face mill body. Arbor hole style B. Holds eight (8) screw clamped TPKT inserts with three (3) cutting edges. 0.512" DOC, minimum cut diameter 4", and 2" overall length. Accommodates inserts available with ground and polished edge or t-land and hone for steel and SS; chip splitting, full wave, and medium positive edges with corner radii from .016" to .157"

9 Iscar 1 1/4" shell mill 90°

HM390 ETP D1.25-4-C1.25-

B

3106630 7 Coolant through 1.250" end mill body. Cylindrical shank with overall length 7.87". Holds four (4) TPKT inserts with 8mm DOC. Accommodates inserts with ground and polished edge or t-land and hone for steel and SS. Corner radii from 0.016" to 0.79"

10 Iscar 2" shell mill 90° (short)

HM390 FTD D2.00-5-.75-15 3106804 14 Coolant through face mill body. Arbor hole style A. Holds five (5) screw clamped TPKT inserts. 0.512" DOC, cut diameter 2", and 1.57" overall length. Accommodates inserts with ground and polished edge or t-land and hone for steel and stainless steel; chip splitting, full wave, and medium positive edges with corner radiuses from .016 to .157"

11 Iscar 1 1/4" High Feed FF EWXD1.25-3-6.0W1.25-

3106834 7 Coolant through 1.250" fast feed end mill body. 17 degree lead angle. Holds three (3) WXCU inserts with six (6) cutting edges. Overall length 8.450" and cutting diameters from 0.740" to 1.250". Weldon Shank

12 Iscar 3/4" Multi-Master 90° Head

HM390 ETC D0.75-

3MMT12-07 (90°)

3107028 7 Coolant through end mill body. Holds three (3) TCKT inserts with three (3) helical cutting edge and corner radius of 0.020". 0.075" cutting diameter, 0.200" DOC, and 1.27" overall length, with the MultiMaster T12 connection.

Accommodates inserts with ground edge or t-land and hone for steel and SS.

13 Iscar 1"Multi-Master 90° Head

HM390 ETP-D1.0-3-

MMT15-10 (90°)

3107045 7 Coolant through end mill body. MultiMaster T15 connection. Holds three (3) screw clamped TPKT inserts with three (3) helical cutting edges and corner radii from 0.016" to 0.79". 0.320 DOC, 1" cut diameter, and 1.77" overall length. Accommodates inserts with ground and polished edge or t-land and hone for steel and SS.

14 Iscar 1/2" Multi-Master (Finishing)

MM S-A-L5.5/2.5C50T08C-

CH (shank)

3107245 14 .500" carbide shank , 5.500" OAL, reduced neck to .480" dia to a length of 2.430" with the MultiMaster T08 connection.

15 Iscar 2" Feed Mill (short)

FFQ4 D2.0-5-0.75-12 3107341 14 Coolant through face mill body. Arbor hole style A. Holds five (5) screw clamped SOMT 12mm inserts with four (4) cutting edges. 0.059" DOC, 1.136" cut diameter, and 2" overall length. Accommodates inserts with edge prep for stainless steel, high temp material, alloy steel and cast iron.

16 Iscar 4" 9° Feed Mill FFQ4 D4.0-8-1.50-12 3107344 7 Coolant through face mill body. Arbor hole style B. Holds eight (8) screw clamped SOMT 12mm inserts with four (4) cutting edges. 0.059" DOC, minimum cut diameter 3.136", and 2"overall length. Accommodates inserts with edge prep for stainless steel, high temp materials, alloy steel and cast iron.

17 Iscar Drill 0.421 diameter (5D)

DCN 0413-206-063R-5D 3202624 7 5xD drill body to hold replaceable heads ranging from 0.413"-0.429" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads. Cylindrical shank and internal coolant holes.

18 Iscar Drill 0.875 diameter (5D)

DCN 0866-433-100R-5D 3202655 7 5xD drill body to hold replaceable heads ranging from 0.492"-0.508" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads. Cylindrical shank and internal coolant holes.

19 Iscar Drill 0.562 diameter (8D)

DCN 0551-441-063R-8D 3202720 7 8xD drill body to hold replaceable heads ranging from 0.551"-0.567" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads. Cylindrical shank and internal coolant holes.

20 Iscar Drill 0.562 diameter (12D)

DCN 0551-661-063R-12D 3202830 7 12xD drill body to hold replaceable heads ranging from 0.551"-0.567" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads. Cylindrical shank and internal coolant holes.

21 Iscar Drill 0.492 diameter (8D)

DCN 0492-394-063R-8D 3203218 7 8xD drill body to hold replaceable heads ranging from 0.492"-0.508" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads. Cylindrical shank and internal coolant holes.

22 Iscar Drill 0.492 diameter (5D)

DCN 0492-246-063R-5D 3260145 7 5xD drill body to hold replaceable heads ranging from 0.492"-0.508" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads. Cylindrical shank and internal coolant holes.

23 Iscar Fast Feed Inserts H600 WXCU 070515HP

IC882

3309414 180 WXCU shaped insert, double sided w/ three cutting edges per side, IC882 grade for machining of stainless and cast steel. TiAIN + TiN coating. Must be compatible with 1 1/4" high feed endmill (3106834).

24 Iscar 90° Inserts HM390 TDCR

150520PDFR-P

3313135 540 Single sided triangle insert with three cutting edges. IC28 grade carbide; uncoated and polished with super positive rake angle for cutting aluminum. Corner radius of 0.079", 0.630" wide and .236" thick.

25 Iscar Fast Feed Inserts FFQ4 SOMT 1205RM-T 3323472 540 Single sided square insert with four cutting edges. IC808 grade carbide; TiAlN/AlTiN+TiN coated for cutting of ferritic and martensitic stainless steel, cast iron, and hardened steel. 0.5" wide, .205" thick and 0.063" corner radius.

26 Iscar Fast Feed Inserts FFQ4 SOMT 1205RM-HP 3323473 360 Single sided square insert with four cutting edges. IC830 grade carbide; TiAlN/AlTiN+TiN coated for cutting of austenitic stainless steel and high temp alloys. 0.5" wide, .205" thick and 0.063" corner radius.

27 Iscar 3/4" Shell Mill Holder (4" L)

HSK A100

HSK A100 SEM3/4X4.00C 3325169 4 Coolant through, guaranteed concentricity less than .0002" and dynamically balanced to G2.5

28 Iscar 3/4" Shell Mill Holder (6" L)

HSK A100

HSK A100 SEM3/4X6.00C 3325171 4 Coolant through, guaranteed concentricity less than .0002" and dynamically balanced to G2.5

29 Iscar 1 1/2" Shell Mill Holder (2.36" L)

HSK A100

HSK A100 SEM1 1/2X2.36C 3325177 6 Coolant through, guaranteed concentricity less than .0002" and dynamically balanced to G2.5

30 Iscar Tool Insertion Key for 1" MM

MM KEY 20 4305309 7 MultiMaster Key

31 Iscar High Speed Reamer Shank

Reamer Shank - RM-BNT5- 8D-.625C

4445505 7 Accommodates a 0.500" diameter Iscar Bayo high speed ream head. Shank diameter of 0.625" with overall length of 6.15". Reduces to 0.406" diameter for minimum 4" length.

32 Iscar ER 32 Tapping Head

GTIN ER32 ANSI .367X.275 4500627 4 Tapping head with tension, compression, and radial float.

Mounts in a ER32 collet nut. Holds a 1/2" cut tap. .03" compression, .157" tension and .004" radial float.

33 Iscar 1 1/4" Endmill Holder HSK A100

HSK A100 EM1-1/4X4.000 4502095 2 Coolant through, guaranteed concentricity less than .0002" and AT3 taper, 4.000" projection and 2.81" nose dia.

34 Iscar 1 1/4" Power Chuck CAT 50

CAT50 MAXIN 1-1/4X4.05 4503954 15 Coolant through, guaranteed concentricity less than .00012" and AT3 taper.

35 Iscar 1 1/4" Power Chuck HSK A100

HSK A100 MAXIN1-

1/4X4.33

4504090 2 Coolant through, guaranteed concentricity less than .00012" and AT3 taper. 4.33" projection and 2.752" nose diameter.

36 Iscar 5/8" Tap Collet SC 1-1/4 SPR 5/8 4504316 10 Straight collet for power chuck, 0.625" dia 37 Iscar 3/4" Shell Mill

Holder (2" L)

CAT50

CAT50 SEM 3/4X2.000 C 4509514 10 Coolant through, guaranteed concentricity less than .0002" and dynamically balanced to G2.5

38 Iscar 3/4" Shell Mill Holder (3.5" L)

CAT50

CAT50 SEM 3/4X3.500 C 4509515 10 Coolant through, guaranteed concentricity less than .0002" and dynamically balanced to G2.5

39 Iscar 1 1/2" Shell Mill Holder CAT50

CAT50 SEM 1-1/2X4.000 C 4509522 15 Coolant through, guaranteed concentricity less than .0002" and dynamically balanced to G2.5

40 Iscar HSK A100 Coolant Tubes

Cooling Tube HSK A100 4511691 20 1.732" overall length and M24X1.5 thread

41 Iscar 1 1/4" Endmill Holder CAT 50

CAT50 EM 1-1/4X4.000 4548058 5 Coolant through, guaranteed concentricity less than .0002" and AT3 taper, 4.000" projection and 2.75" nose dia.

42 Iscar 3/4" Hydraulic

HSK A100

Holder

HSK A100 HYDRO

3/4X4.134

4559392 4 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 4.134" projection and a 1.65" nose dia.

43 Iscar 1" Hydraulic

HSK A100

Holder

HSK A100 HYDRO 1X4.528 4559393 6 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 4.528" projection and a 1.97" nose dia.

44 Iscar 3/8" Hydraulic CAT 50 Holder

CAT50 HYDRO 3/8X2.834 4559614 10 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 2.834" projection and a 1.26" nose dia.

45 Iscar 1/2" Hydraulic CAT 50 Holder

CAT50 HYDRO 1/2X3.228 4559615 10 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 3.228" projection and a 1.26" nose dia.

46 Iscar 5/8" Hydraulic CAT 50 Holder

CAT50 HYDRO 5/8X3.149 4559616 30 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 3.15" projection and a 1.49" nose dia.

47 Iscar 3/4" Hydraulic CAT 50 Holder

CAT50 HYDRO 3/4X3.228 4559617 10 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 3.23" projection and a 1.65" nose dia.

48 Iscar 1" Hydraulic CAT 50 Holder

CAT50 HYDRO 1X3.228 4559619 20 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 3.23" projection and a 1.97" nose dia.

49 Iscar 1 1/4" Endmill Holder HSK A100

HSK A100 HYDRO 1

1/4X4.72

4559630 24 Coolant through, guaranteed concentricity less than .0002" and AT3 taper, 4.72" projection and 2.75" nose dia.

50 Iscar 1 1/4" X 3/8" Hydraulic Sleeve

SC 1 1/4 S HYDRO 3/8 4559646 4 1.25" OD, 0.375" OD, and 2.6" OAL. Must be compatible with 1 1/4" hydraulic holders (4559630).

51 Iscar 1 1/4" X 1/2" Hydraulic Sleeve

SC 1 1/4 S HYDRO 1/2 4559647 4 1.25" OD, 0.25" OD, and 2.6" OAL. Must be compatible with 1 1/4" hydraulic holders (4559630).

52 Iscar 1 1/4" X 5/8" Hydraulic Sleeve

SC 1 1/4 S HYDRO 5/8 4559648 16 1.25" OD, 0.25" OD, and 2.6" OAL. Must be compatible with 1 1/4" hydraulic holders (4559630).

53 Iscar ER 32 Collet Holder HSK A100

HSK A100 ER32X100 4561015 2 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 4.000" projection and a 1.97" nose dia.

54 Iscar HSK A100 Cooling Tube Wrenches

Wrench Cool Tube HSK100 4561259 5 Compatible with HSK A100 Coolant Tubes

55 Iscar ER 32 Collet Holder CAT 50

CAT50 ER32X4.00 4590216 5 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 4.000" projection and a 1.968" nose dia.

56 Iscar Reamer Head Reamer Head RM-BN5-

0.5010-H7SA IC908

5190227 20 0.501" high performance reamer head. Compatible with high speed reamer shank 4445505. IC908 grade carbide with TiAlN coating for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. 6 flute with minimum 0.370" thickness/length.

57 Iscar 0.492" Diameter Self-Centering Drill Head

HCP 0492-IQ 5567340 36 IC908 grade carbide. Compatible with drill bodies 3260145 and 3203218.

58 Iscar 0.421" Diameter Self-Centering Drill Head

HCP 0421-IQ 5567943 18 IC908 grade carbide. Compatible with drill body 3202624.

59 Iscar 0.563" Diameter Self-Centering Drill Head

HCP 0563-IQ 5567971 36 IC908 grade carbide. Compatible with drill bodies 3202720 and 3202830.

60 Iscar 0.874" Diameter Flat Bottom Drill Head

FCP 0874 5568181 18 IC908 grade carbide. Compatible with drill body 3202655.

61 Iscar High Feed WXCU Carbide Insert

H600 WXCU 040310T 5606379 360 Double sided with 6 cutting edges. IC808 grade carbide for cutting of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel.

TiAlN/AlTiN+TiN coating. 0.246" IC, 0.122 thickness, and 0.038" corner radius.

62 Iscar Chatter Free 3/8" Multi-Master Endmill

MM EC375E27R0-CF-4T06 5606852 20 4 flute endmill with T06 threaded connection. IC908 grade carbide with TiAIN coating for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. Chatter free. 0.375" dimater with 0.500" minimum depth of cut.

63 Iscar 1/2" Multi-Master High Feed Endmill

MM EFF127T4R2.59-4T08 5606945 20 4 flute high feed endmill with T08 thread connection. IC903 grade carbide with TiAIN coating for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. 0.024" minimum depth of cut.

64 Iscar HM390 TPKT Insert for 90° Face Mill

HM390 TPKT 1003PDR 5607513 360 Single sided triangle insert with three cutting edges. IC808 grade carbide; TiAlN/AlTiN+TiN coated and for cutting low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. Corner radius of 0.031", 0.429" wide and .152" thick.

65 Iscar HM390 TPCR Insert for 90° Face Mill

HM390 TPCR1003PDFR-P 5607518 360 Single sided triangle insert with three cutting edges. IC28 grade carbide; coated and polished with super positive rake angle for cutting aluminum. Corner radius of 0.031", 0.429" wide and .157" thick.

66 Iscar Insert for 50° Face Mill

IQ845 SYHU 0704ADN-MM

IC5400

5607524 180 Single sided square insert with eight cutting edges. IC5400 grade carbide with TiCN+Al2O3+TiN coating for cutting alloy and stainless steels. Corner radius of 0.031", minimum 0.180" DOC, and .165" thick.

67 Iscar HM390 TDKT Insert for 90° Face Mill

HM390 TDKT 1505PDR 5607679 540 Single sided triangle insert with three cutting edges. IC808 grade carbide; TiAlN/AlTiN+TiN coated and for cutting low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. Corner radius of 0.031", 0.429" wide and 0.152" thick.

68 Iscar HM390 TCKT Insert for 90° Face Mill

HM390 TCKT 0703PCTR

IC808

5607773 180 Single sided triangle insert with three cutting edges. IC808 grade carbide; TiAlN/AlTiN+TiN coated and for cutting low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. Corner radius of 0.020", 0.307" wide and 0.124" thick.

69 Iscar HM390 TCCT Insert for 90° Face Mill

HM390 TCCT 0703PCR

IC380

5607776 180 Single sided triangle insert with three cutting edges. IC380 grade carbide; TiAlN/AlTiN+TiN coated and for cutting cast iron, high temperature alloys, titanium, and hardened steel. Corner radius of 0.020", 0.307" wide and 0.124" thick.

70 Iscar 1/2" Multi-Master Endmill

MM EA.500B37R020-2T08 5621328 18 2 flute endmill with T08 threaded connection. IC08 grade uncoated carbide with for machining of aluminum. 0.500" diameter with 0.370" minimum depth of cut and 0.020" corner radius.

71 Iscar 3/8" Multi-Master Endmill

MM EA.375B27R000-2T06 5622000 18 2 flute endmill with T06 threaded connection. IC08 grade uncoated carbide with for machining of aluminum. 0.375" diameter with 0.270" minimum depth of cut and 0.000" corner radius.

72 Iscar 3/4" Multi-Master Endmill

MM EA.750B50R008-3T12 5622019 18 3 flute endmill with T12 threaded connection. IC08 grade uncoated carbide with for machining of aluminum. 0.375" diameter with 0.500" minimum depth of cut and 0.008" corner radius.

73 Iscar 1/2" Multi-Master Endmill

MM EC500E37C20CF-4T08 5622603 18 4 flute endmill with T08 threaded connection. IC908 grade carbide coated with TiAlN for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. 0.500" diameter with 0.370" minimum depth of cut and 0.000" corner radius.

74 Iscar 3/4" Multi-Master Endmill

MM EC750E62C24CF-4T12 5622605 18 4 flute endmill with T12 threaded connection. IC908 grade carbide coated with TiAlN for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. 0.750" diameter with 0.620" minimum depth of cut and 0.000" corner radius.

75 Iscar 1" Multi-Master Endmill

MM EA1.0H75R02-3T15 5622634 18 3 flute endmill with T15 threaded connection. IC08 grade uncoated carbide with for machining of aluminum. 1.000" diameter with 0.750" minimum depth of cut and 0.020" corner radius.

76 Iscar High Feed WXCU Carbide Insert

H600 WXCU 070515T

IC808

5666930 180 Double sided with 6 cutting edges. IC808 grade carbide for cutting of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel.

TiAlN/AlTiN+TiN coating. 0.439" IC, 0.232" thickness, and 0.059" corner radius.

77 Iscar Insert for 50° Face Mill

IQ845 SYHU 0704ADN-P

IC28

5667874 180 Single sided square insert with eight cutting edges. IC28 grade uncoated carbide for machining of aluminum. Corner radius of 0.031", minimum 0.180" DOC, and .165" thick.

78 Iscar 3/8" Multi-Master High Feed Endmill

MM EFF100T2R1.0-6T06H 5668259 18 4 flute high feed endmill with T06 thread connection. IC903 grade carbide with TiAIN coating for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. 0.018" minimum depth of cut.

79 Iscar Tool Insertion Key for 1/2" MM

MM KEY 10X7 7002616 7 MultiMaster Key

80 Iscar Tool Insertion Key for 3/8" MM

MM KEY 8X5 7002809 7 MultiMaster Key

81 Iscar Tool Insertion Key for 3/4" MM

MM KEY 16-9 7003308 7 MultiMaster Key

82 Iscar Spot Drill NC Spot 140 degrees T062813 40 5/8" diameter shank. Minimum 5" long. 140° cutting angle.