FA812519Q0009_Tooling_Soliciation.pdf

SEE ADDENDUM

(No Collect Calls)

FA812519Q0009 07-Nov-2018

b. TELEPHONE NUMBER

405-739-9117

8. OFFER DUE DATE/LOCAL TIME

12:00 AM 20 Nov 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

FA81259. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

LINSEY N LAIRD

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

F3YCEB8268A101

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

AFSC/PZIMA

LINSEY N LAIRD/405-739-9117

3001 STAFF DR STE 2S 76

TINKER AFB OK 73145

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE F3YCEB 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

F3YCEB

OC-ALC/OBC

BLDG 3001 STAFF DR. DOOR G70 POST N68

TINKER AFB OK 73145

TEL: 405-736-7693 FAX:

FAX:

TEL: 405-739-9117 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

332510

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

FA812519Q0009

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 14 Each ISCAR 3/8" MultiMaster Shank

FFP

P/N: 3103093 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

PURCHASE REQUEST NUMBER: F3YCEB8268A101

SIGNAL CODE: A

NET AMT

0002 14 Each ISCAR 3/4" MultiMaster Shank

FFP

P/N: 3103843 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0003 14 Each ISCAR 1" MultiMaster Shank

FFP

P/N: 3105424 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0004 14 Each ISCAR 3/4" High Feed Head

FFP

P/N: 3105634 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0005 7 Each ISCAR 1" Carbide Multi-Master Shank

FFP

P/N: 3105415 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0006 14 Each ISCAR 1" High Feed Head MM

FFP

P/N: 3106376 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0007 7 Each ISCAR 4" 50 Degree Face Mill

FFP

P/N: 3106551 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0008 7 Each ISCAR 4" 90 Degree Face Mill

FFP

P/N: 3106566 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0009 7 Each ISCAR 1 1/4" Shell Mill 90 Degree

FFP

P/N: 3106630 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0010 14 Each ISCAR 2" Shell Mill 90 Degree (short)

FFP

P/N: 3106804 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0011 7 Each ISCAR 1 1/4" High Feed

FFP

P/N: 3106834 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0012 7 Each ISCAR 3/4" Multi-Master 90 Degree Head

FFP

P/N: 3107028 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0013 7 Each ISCAR 1" Multi-Master 90 Degree Head

FFP

P/N: 3107045 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0014 14 Each ISCAR 1/2" Multi-Master (Finishing)

FFP

P/N: 3107245 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0015 14 Each ISCAR 2" Feed Mill (Short)

FFP

P/N: 3107341 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0016 7 Each ISCAR 4" 9 Degree Feed Mill

FFP

P/N: 3107344 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0017 7 Each ISCAR Drill 0.421 diameter (5D)

FFP

P/N: 3202624 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0018 7 Each ISCAR Drill 0.875 diameter (5D)

FFP

P/N: 3202655 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0019 7 Each ISCAR Drill 0.562 diameter (8D)

FFP

IP/N: 3202720 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0020 7 Each ISCAR Drill 0.562 diameter (12D)

FFP

P/N: 3202830 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0021 7 Each ISCAR Drill 0.492 diameter (8D)

FFP

P/N: 3203218 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0022 7 Each ISCAR Drill 0.492 diameter (5D)

FFP

P/N: 3260145 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0023 180 Each ISCAR Fast Feed Inserts (IC882)

FFP

P/N: 3309414 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0024 540 Each ISCAR 90 Degree Inserts

FFP

P/N: 3313135 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0025 540 Each ISCAR Fast Feed Inserts (IC808)

FFP

P/N: 3323472 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0026 360 Each ISCAR Fast Feed Inserts (IC830)

FFP

P/N: 3323473 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0027 4 Each ISCAR 3/4" Shell Mill Holder (4" L)

FFP

P/N: 3325169 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0028 4 Each ISCAR 3/4" Shell Mill Holder (6" L)

FFP

P/N: 3325171 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0029 6 Each ISCAR 1 1/2" Shell Mill Holder (2.36"L)

FFP

P/N: 3325177 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0030 7 Each ISCAR Tool Insertion Key for 1" MM

FFP

P/N: 4305309 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0031 7 Each ISCAR High Speed Reamer Shank

FFP

P/N: 4445505 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0032 4 Each ISCAR ER 32 Tapping Head

FFP

P/N: 4500627 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0033 2 Each ISCAR 1 1/4" Endmill Holder HSK A100

FFP

P/N: 4502095 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0034 15 Each ISCAR 1 1/4" Power Chuck CAT 50

FFP

P/N: 4503954 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0035 2 Each ISCAR 1 1/4" Power Chuck HSK A100

FFP

P/N: 4504090 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0036 10 Each ISCAR 5/8" Tap Collet

FFP

P/N: 4504316 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0037 10 Each ISCAR 3/4" Shell Mill Holder (2"L) CAT50

FFP

P/N: 4509514 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0038 10 Each ISCAR 3/4" Shell Mill Holder (3.5" L)

FFP

P/N: 4509515 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0039 15 Each ISCAR 1 1/2" Shell Mill Holder CAT50

FFP

P/N: 4509522 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0040 20 Each ISCAR HSK A100 Coolant Tubes

FFP

P/N: 4511691 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0041 5 Each ISCAR 1 1/4" Endmill Holder CAT 50

FFP

P/N: 4548058 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0042 4 Each ISCAR 3/4" Hydraulic HSK A100 Holder

FFP

P/N: 4559392 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0043 6 Each ISCAR 1" Hydraulic HSK A100 Holder

FFP

P/N: 4559393 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0044 10 Each ISCAR 3/8" Hydraulic CAT 50 Holder

FFP

P/N: 4559614 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0045 10 Each ISCAR 1/2" Hydraulic CAT 50 Holder

FFP

P/N: 4559615 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0046 30 Each ISCAR 5/8" Hydraulic CAT 50 Holder

FFP

P/N: 4559616 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0047 10 Each ISCAR 3/4" Hydraulic CAT 50 Holder

FFP

P/N: 4559617 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0048 20 Each ISCAR 1" Hydraulic CAT 50 Holder

FFP

P/N: 4559619 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0049 24 Each ISCAR 1 1/4" Endmill Holder HSK A100

FFP

P/N: 4559630 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0050 4 Each ISCAR 1 1/4" X 3/8" Hydraulic Sleeve

FFP

P/N: 4559646 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0051 4 Each ISCAR 1 1/4" X 1/2 " Hydraulic Sleeve

FFP

P/N: 4559647 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0052 16 Each ISCAR 1 1/4" X 5/8" Hydraulic Sleeve

FFP

P/N: 4559648 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0053 2 Each ISCAR ER 32 Collet Holder HSK A100

FFP

P/N: 4561015 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0054 5 Each ISCAR HSK A100 Cooling Tube Wrenches

FFP

P/N: 4561259 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0055 5 Each ISCAR ER 32 Collet Holder CAT 50

FFP

P/N: 4590216 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0056 20 Each ISCAR Reamer Head

FFP

P/N: 5190227 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0057 36 Each ISCAR 0.492" Dia. Self-Center Drill Head

FFP

P/N: 5567340 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0058 18 Each ISCAR 0.421" Dia. Self-Center Drill Head

FFP

P/N: 5567943 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0059 36 Each ISCAR 0.563" Dia. Self-Center Drill Head

FFP

P/N: 5567971 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0060 18 Each ISCAR 0.874" Dia. Flat Bottom Drill Head

FFP

P/N: 5568181 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0061 360 Each ISCAR High Feed WXCU Carbide Insert

FFP

P/N: 5606379 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0062 20 Each ISCAR Chatter Free 3/8" MM Endmill

FFP

P/N: 5606852 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0063 20 Each ISCAR 1/2" MM High Feed Endmill

FFP

P/N: 5606945 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0064 360 Each ISCAR HM390 TPKT Insert

FFP

P/N: 5607513 (or Equivalent) IAW Item Description (for 90 degree face mill) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0065 360 Each ISCAR HM390 TPCR Insert

FFP

P/N: 5607518 (or Equivalent) IAW Item Description (for 90 degree face mill) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0066 180 Each ISCAR Insert for 50 Degree Face Mill

FFP

P/N: 5607524 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0067 540 Each ISCAR HM390 TDKT Insert

FFP

P/N: 5607679 (or Equivalent) IAW Item Description (for 90 degree face mill) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0068 180 Each ISCAR HM390 TCKT Insert

FFP

P/N: 5607773 (or Equivalent) IAW Item Description (for 90 degree face mill) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0069 180 Each ISCAR HM390 TCCT Insert

FFP

P/N: 5607776 (or Equivalent) IAW Item Description (for 90 degree face mill) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0070 18 Each ISCAR 1/2" Multi-Master Endmill

FFP

P/N: 5621328 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0071 18 Each ISCAR 3/8" Multi-Master Endmill

FFP

P/N: 5622000 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0072 18 Each ISCAR 3/4" Multi-Master Endmill

FFP

P/N: 5622019 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0073 18 Each ISCAR 1/2" Multi-Master Endmill

FFP

P/N: 5622603 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0074 18 Each ISCAR 3/4" Multi-Master Endmill

FFP

P/N: 5622605 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0075 18 Each ISCAR 1" Multi-Master Endmill

FFP

P/N: 5622634 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0076 180 Each ISCAR High Feed WXCU Carbide Insert

FFP

P/N: 5666930 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0077 180 Each ISCAR Insert for 50 Degree Face Mill

FFP

P/N: 5667874 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0078 18 Each ISCAR 3/8" MM High Feed Endmill

FFP

P/N: 5668259 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0079 7 Each ISCAR Tool Insertion Key for 1/2" MM

FFP

P/N: 7002616 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0080 7 Each ISCAR Tool Insterion Key for 3/8" MM

FFP

P/N: 7002809 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0081 7 Each ISCAR Tool Insertion Key for 3/4" MM

FFP

P/N: 7003308 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

0082 40 Each ISCAR Spot Drill

FFP

P/N: T062813 (or Equivalent) IAW Item Description NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government

0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 0026 Destination Government Destination Government 0027 Destination Government Destination Government 0028 Destination Government Destination Government 0029 Destination Government Destination Government 0030 Destination Government Destination Government 0031 Destination Government Destination Government 0032 Destination Government Destination Government 0033 Destination Government Destination Government 0034 Destination Government Destination Government 0035 Destination Government Destination Government 0036 Destination Government Destination Government 0037 Destination Government Destination Government 0038 Destination Government Destination Government 0039 Destination Government Destination Government 0040 Destination Government Destination Government 0041 Destination Government Destination Government 0042 Destination Government Destination Government 0043 Destination Government Destination Government 0044 Destination Government Destination Government 0045 Destination Government Destination Government 0046 Destination Government Destination Government 0047 Destination Government Destination Government 0048 Destination Government Destination Government 0049 Destination Government Destination Government 0050 Destination Government Destination Government 0051 Destination Government Destination Government 0052 Destination Government Destination Government 0053 Destination Government Destination Government 0054 Destination Government Destination Government 0055 Destination Government Destination Government 0056 Destination Government Destination Government 0057 Destination Government Destination Government 0058 Destination Government Destination Government 0059 Destination Government Destination Government

0060 Destination Government Destination Government 0061 Destination Government Destination Government 0062 Destination Government Destination Government 0063 Destination Government Destination Government 0064 Destination Government Destination Government 0065 Destination Government Destination Government 0066 Destination Government Destination Government 0067 Destination Government Destination Government 0068 Destination Government Destination Government 0069 Destination Government Destination Government 0070 Destination Government Destination Government 0071 Destination Government Destination Government 0072 Destination Government Destination Government 0073 Destination Government Destination Government 0074 Destination Government Destination Government 0075 Destination Government Destination Government 0076 Destination Government Destination Government 0077 Destination Government Destination Government 0078 Destination Government Destination Government 0079 Destination Government Destination Government 0080 Destination Government Destination Government 0081 Destination Government Destination Government 0082 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 120 dys. ADC 14 F3YCEB

OC-ALC/OBC

BLDG 3001 STAFF DR. DOOR G70 POST

N68

TINKER AFB OK 73145

405-736-7693 FOB: Destination

F3YCEB

0002 120 dys. ADC 14 (SAME AS PREVIOUS LOCATION)

0003 120 dys. ADC 14 (SAME AS PREVIOUS LOCATION)

0004 120 dys. ADC 14 (SAME AS PREVIOUS LOCATION)

0005 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0006 120 dys. ADC 14 (SAME AS PREVIOUS LOCATION)

0007 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0008 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0009 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0010 120 dys. ADC 14 (SAME AS PREVIOUS LOCATION)

0011 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0012 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0013 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0014 120 dys. ADC 14 (SAME AS PREVIOUS LOCATION)

0015 120 dys. ADC 14 (SAME AS PREVIOUS LOCATION)

0016 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0017 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0018 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0019 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0020 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0021 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0022 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0023 120 dys. ADC 180 (SAME AS PREVIOUS LOCATION)

0024 120 dys. ADC 540 (SAME AS PREVIOUS LOCATION)

0025 120 dys. ADC 540 (SAME AS PREVIOUS LOCATION)

0026 120 dys. ADC 360 (SAME AS PREVIOUS LOCATION)

0027 120 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0028 120 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0029 120 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0030 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0031 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0032 120 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0033 120 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0034 120 dys. ADC 15 (SAME AS PREVIOUS LOCATION)

0035 120 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0036 120 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0037 120 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0038 120 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0039 120 dys. ADC 15 (SAME AS PREVIOUS LOCATION)

0040 120 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0041 120 dys. ADC 5 (SAME AS PREVIOUS LOCATION)

0042 120 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0043 120 dys. ADC 6 (SAME AS PREVIOUS LOCATION)

0044 120 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0045 120 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0046 120 dys. ADC 30 (SAME AS PREVIOUS LOCATION)

0047 120 dys. ADC 10 (SAME AS PREVIOUS LOCATION)

0048 120 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0049 120 dys. ADC 24 (SAME AS PREVIOUS LOCATION)

0050 120 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0051 120 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0052 120 dys. ADC 16 (SAME AS PREVIOUS LOCATION)

0053 120 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0054 120 dys. ADC 5 (SAME AS PREVIOUS LOCATION)

0055 120 dys. ADC 5 (SAME AS PREVIOUS LOCATION)

0056 120 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0057 120 dys. ADC 36 (SAME AS PREVIOUS LOCATION)

0058 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0059 120 dys. ADC 36 (SAME AS PREVIOUS LOCATION)

0060 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0061 120 dys. ADC 360 (SAME AS PREVIOUS LOCATION)

0062 120 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0063 120 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0064 120 dys. ADC 360 (SAME AS PREVIOUS LOCATION)

0065 120 dys. ADC 360 (SAME AS PREVIOUS LOCATION)

0066 120 dys. ADC 180 (SAME AS PREVIOUS LOCATION)

0067 120 dys. ADC 540 (SAME AS PREVIOUS LOCATION)

0068 120 dys. ADC 180 (SAME AS PREVIOUS LOCATION)

0069 120 dys. ADC 180 (SAME AS PREVIOUS LOCATION)

0070 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0071 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0072 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0073 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0074 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0075 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0076 120 dys. ADC 180 (SAME AS PREVIOUS LOCATION)

0077 120 dys. ADC 180 (SAME AS PREVIOUS LOCATION)

0078 120 dys. ADC 18 (SAME AS PREVIOUS LOCATION)

0079 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0080 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0081 120 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0082 120 dys. ADC 40 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.204-13 System for Award Management Maintenance OCT 2016 52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.204-17 Ownership or Control of Offeror JUL 2016 52.204-18 Commercial and Government Entity Code Maintenance JUL 2016 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-20 Predecessor of Offeror JUL 2016 52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

NOV 2015

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations

NOV 2015

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law

FEB 2016

52.212-1 Instructions to Offerors--Commercial Items AUG 2018 52.219-1 Alt I Small Business Program Representations (Sept 2015)

Alternate I

SEP 2015

52.222-22 Previous Contracts And Compliance Reports FEB 1999 52.222-25 Affirmative Action Compliance APR 1984 52.223-22 Public Disclosure of Greenhouse Gas Emissions and

Reduction Goals -- Representation.

DEC 2016

52.232-1 Payments APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7003 Agency Office of the Inspector General DEC 2012 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7008 Compliance With Safeguarding Covered Defense Information Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

OCT 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism

OCT 2015

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017 252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017 252.225-7021 Trade Agreements--Basic DEC 2017 252.225-7036 Buy American--Free Trade Agreements--Balance of

Payments Program--Basic

DEC 2017

252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.247-7023 Transportation of Supplies by Sea APR 2014

CLAUSES INCORPORATED BY FULL TEXT

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2016)

(a) Definitions. As used in this provision--

Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Registered in the System for Award Management (SAM) database means that--

(1) The Offeror has entered all mandatory information, including the unique entity identifier and the EFT indicator, if applicable, the Commercial and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see subpart 4.14) into the SAM database;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in the SAM database;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b)(1) By submission of an offer, the Offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

http://www.sam.gov/

(2) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation ``Unique Entity Identifier'' followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable. The unique entity identifier will be used by the Contracting Officer to verify that the Offeror is registered in the SAM database.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state, and Zip Code.

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company headquarters name and address (reporting relationship within your entity).

(d) If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) Offerors may obtain information on registration at https://www.acquisition.gov.

(End of clause)

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must--

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by--http://www.sam.gov/ https://www.acquisition.gov/

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

1. Basis for Contract Award:

The Award will be conducted and evaluated under the provisions of FAR Part 12, Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This acquisition will utilize Lowest Price Technically Acceptable (LPTA) source selection procedures. Technical tradeoffs will not be made and no additional credit will be given for exceeding acceptability. Award will be made to the acceptable offeror with the lowest evaluated cost or price, which is deemed responsible in accordance with the Federal Acquisition Regulation and whose proposal conforms to the solicitation requirements. The solicitation requirements include all stated terms, conditions, representations, certifications, and all other information required by FAR 52.212-1 of this solicitation. The Government reserves the right to award without clarifications. However, the Government reserves the right to conduct clarifications if determined necessary by the Contracting Officer.

The responsible offerors must be registered in the System for Award Management (SAM) database (available at:

https://www.sam.gov/portal/public/SAM/) and submit a completed copy of the Offeror Representations and Certifications – Commercial Items with their response. Lack of registration in SAM will disqualify the vendor and declare them ineligible for award.

The Oklahoma City‐Air Logistics Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma intends to issue a commercial firm fixed price contract for this acquisition.

2. Number of Contracts to be Awarded:

The Government intends to select one contractor for the award.