FA812519Q0009_P0001.pdf

F3YCEB8268A101

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to hereby replace the Item Description as follow s:

FIRST: The item description is replaced in it's entirety.

FROM: Item Description dated 31 Oct 18 TO: Item Description dated 13 Nov 18

SECOND: Updated Clause 52.212-2 Evaluation and Contractor Notes to reflect the revised Item Description.

THIRD: The closing date remains unchanged.

FOURTH: All other terms and conditions remain unchanged and in full force and effect

1. CONTRACT ID CODE PAGE OF PAGES

J 1 14

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 13-Nov-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X FA812519Q0009

X 9B. DATED (SEE ITEM 11)

07-Nov-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

13-Nov-2018

CODE

AFSC/PZIMA

LINSEY N LAIRD/405-739-9117

3001 STAFF DR STE 2S 76

TINKER AFB OK 73145

FA8125 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

FA812519Q0009

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

CONTRACTOR NOTES

1. CONTRACT HOLIDAYS

(a) The prices/costs in Section B of the contract holiday observances; accordingly, the Government will not be billed for such holidays, except when services are required by the Government and are actually performed on a holiday. Holidays in addition to those reflected in this contract, which are designated by the Government, will be billable provided the assigned Contractor employee was available for performance and was precluded from such performance.

(b) The following days are contract holidays: New Years Day, Martin Luther King, Jr. Day, President’s Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, Christmas Day.

2. “TRUCK ENTRY GATE” NOTICE

IMPORTANT DELIVERY INFORMATION

Tinker Air Force Base has constructed a “Truck Entry Gate” (Gate 33), which is located at the corner of 59th Street and Air Depot Blvd (southwest corner of the base).

Gate 33 shall be used for all deliveries by truck to this base. Any commercial vehicle traffic after the standard Truck Gate hours (0600-1600) or on weekends will be expected to utilize Piazza Gate. Adjust travel or delivery plans to the installation accordingly.

To access Piazza Gate from the Truck Entry Gate, proceed south on South Air Depot Blvd. to SE 74th St., turn east and proceed to S. Midwest Blvd., turn north, and proceed to Piazza Gate.

(Trucks will not be allowed to gain access through any other gate.)

Since your firm’s delivery on this order is affected, please advise your delivery carrier to use the new gate. This should minimize the impact of your delivery.

DELIVERIES TO BUILDING 3001 (B / 3001)

Be advised that delivery vehicles destined for B / 3001 are prohibited from using “Staff Drive”.

Delivery vehicles may make deliveries only in designated unloading areas.

Since your firm’s delivery may be affected, ensure that your delivery carrier receives proper instructions on delivery / unloading requirements for B / 3001. Unloading in designated unloading areas will minimize any inconvenience, and, attendant ramifications, which may accrue, to your delivery / delivery carrier for failure to adhere to this requirement.

3. CONTRACTOR ID BADGE REQUIREMENTS

Contractors working on Tinker AFB shall comply with all procedures outlined in TAFBI 31-101, AFI 10-245 and TAFBP 31-101. OF SPECIAL NOTE, in accordance with TAFBI 31-101 para 5.3, all contractors/contractor personnel will be assessed a charge of $50.00 for each badge lost, willfully damaged, or not surrendered to Pass and Registration. No charge will be made on a replacement required due to normal wear. Personnel will report to Accounting and Finance, Accounts Receivable Unit and a DD Form 1131, Cash Collection Voucher, will be prepared and presented to Pass and Registration prior to issuing a replacement identification. Identification will be surrendered to Security Forces personnel upon demand for the purpose of identification, investigation, abuse, misuse, or for any other reason necessary. Civilian and military retirees who conduct commercial business on base must obtain a badge through their place of employment. ALSO OF SPECIAL NOTE, in accordance with TAFBI 31-101 para 7, all contractors/contractor personnel shall be subject to background checks as deemed necessary.

4. LIST OF ATTACHMENTS

FORM NR DESCRIPTION DATE NR OF PAGES

N/A Item Description 13 Nov 2018 09

PACKAGING

Items shall be packaged in accordance with the Contractor’s commercial best practice to ensure undamaged arrival at destination. Individual shipments exceeding 150 pounds, 108 inches in length, or 130 inches in girth plus length shall be packaged on skidded crates or palletized to allow handling by forklift.

The exterior container shall be marked (readable from 24 inches), “NOT FOR OUTSIDE STORAGE.”

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

1. Basis for Contract Award:

The Award will be conducted and evaluated under the provisions of FAR Part 12, Commercial Items and FAR Part 13, Simplified Acquisition Procedures. This acquisition will utilize Lowest Price Technically Acceptable (LPTA) source selection procedures. Technical tradeoffs will not be made and no additional credit will be given for exceeding acceptability. Award will be made to the acceptable offeror with the lowest evaluated cost or price, which is deemed responsible in accordance with the Federal Acquisition Regulation and whose proposal conforms to the solicitation requirements. The solicitation requirements include all stated terms, conditions, representations, certifications, and all other information required by FAR 52.212-1 of this solicitation. The Government reserves the right to award without clarifications. However, the Government reserves the right to conduct clarifications if determined necessary by the Contracting Officer.

The responsible offerors must be registered in the System for Award Management (SAM) database (available at:

https://www.sam.gov/portal/public/SAM/) and submit a completed copy of the Offeror Representations and Certifications – Commercial Items with their response. Lack of registration in SAM will disqualify the vendor and declare them ineligible for award.

The Oklahoma City‐Air Logistics Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma intends to issue a commercial firm fixed price contract for this acquisition.

2. Number of Contracts to be Awarded:

The Government intends to select one contractor for the award. However, the Government reserves the right to award no contract at all; depending on the quality of the proposals, prices submitted and the availability of funds, or other factors identified by the Contracting Officer.

3. Rejection of Unreasonable Offers:

The Government may reject any proposal that is evaluated to be unrealistic in terms of program commitments, including contract terms and conditions, or unrealistically high or low in cost/price when compared to Government estimates, such that the proposal is deemed to reflect an inherent lack of competence or failure to comprehend the complexity and risks of the program, item or service.

4. Correction Potential of Proposals:

The Government will consider, throughout the evaluation, the "correction potential" of any proposal uncertainty.

The judgment of such "correction potential" is within the sole discretion of the Government. If an aspect of an offeror's proposal not meeting the Government's requirements is not considered correctable, the offeror may be eliminated from the competitive range.

5. Evaluation Factors

Factor 1—Technical Proposal Factor 2—Cost/Price

a. Evaluation Methodology:

The Government will evaluate all technical factors concurrently for the three (3) lowest priced proposals. Should one of those three (3) proposals not be found technically acceptable, the next one (1) lowest priced offeror will be reviewed for technical acceptance. Then, price will be evaluated and the proposals will be listed from lowest to highest price based on the total evaluated price either initially or as a result of clarifications.

Award will be made to the lowest evaluated priced proposal meeting the acceptability standards for the non-cost factors.

b. Technical Factor:

Acceptable – The proposal meets specified minimum technical evaluation requirements necessary for acceptable contract performance.

Unacceptable – The proposal fails to meet specified minimum technical eavluation requirements necessary for contract performance. Proposals with an unacceptable rating are not awardable.

Technical acceptability will be based on an evaluation of proposals against the criteria stated below and other technical specifications in the Item Description. Offerors are required to present all the information as stated in the

Instructions to Offerors, FAR 52.212-1. The minimum technical evaluation requirement is met when the Offeror’s proposal thoroughly substantiates all the following essential criteria:

“CONTRACTOR MUST PROVIDE A WRITTEN STATEMENT TO EXPLAIN HOW THEY ARE

MEETING THE TECHNICAL EVALUATION CRITERIA LISTED BELOW. A STATEMENT OF “I

CONCUR” OR “CONCUR” WILL NOT BE ACCEPTED AND COULD DEEM YOUR PROPOSAL

TECHNICALLY UNACCEPTABLE. THE WRITTEN STATEMENT IS ESSENTIAL FOR YOUR

QUOTE TO BE RESPONSIVE AND BE REFERRED FOR TECHNICAL REVIEW.”

TECHNICAL EVALUATION CRITERA

CLIN

Brand Description Part Number/Catalog Ref#

Qty. Salient Characteristics Acceptable Non- Acceptable

1 Iscar 3/8" MultiMaster Shank

3103093 14 .375" carbide shank , 4.750" OAL, reduced neck to .364" dia to a length of 1.950" with the MultiMaster T06 connection.

2 Iscar 3/4"Multi- Master Shank

3103843 14 Coolant through 0.750" diameter carbide shank , 5.500" OAL, reduced neck to .720" dia to a length of 2.930" with the MultiMaster T12 connection.

3 Iscar 1" Multi-

Shank

3105424 14 Coolant through 1.000" diameter steel shank , 7.00" OAL, reduced neck to .940" dia to a length of 2.40" with the MultiMaster T15 connection.

4 Iscar 3/4" High Feed Head

3105634 14 Coolant through endmill body.

Multimaster T12 connection. Holds three (3) WXCU inserts with six (6) cutting edges. 0.460"-0.750" cutting diameter, 0.030" DOC, and 1.540" overall length.

5 Iscar 1" Carbide Multi- Master Shank

3105415 7 Coolant through 1.000" diameter carbide shank , 10.00" OAL, reduced neck to .940" dia to a length of 2.40" with the MultiMaster T15 connection.

6 Iscar 1" High Feed Head

MM

3106376 14 Coolant through endmill body.

Multimaster T15 connection. Holds four(4) screw clamped WXCU inserts with six (6) cutting edges. 0.693"- 0.984" cutting diameter, 0.031" DOC, and 1.85" overall length.

7 Iscar 4" 50° Face Mill

3106551 7 Coolant through face mill body.

Arbor hole style B. Holds seven (7) screw clamped SHYU inserts each with eight (8) cutting edges. 0.180" DOC, minimum cut diameter 4", and 2" overall length. Accommodates inserts available with ground and polished edge or t-land and hone for steel and SS. Rigid dove tail clamping. Positive pocket orientation.

8 Iscar 4" 90° Face

3106566 7 Coolant through face mill body.

Arbor hole style B. Holds eight (8) screw clamped TPKT inserts with three (3) cutting edges. 0.512" DOC, minimum cut diameter 4", and 2" overall length. Accommodates inserts available with ground and polished edge or t-land and hone for steel and SS; chip splitting, full wave, and medium positive edges with corner radii from .016" to .157"

9 Iscar 1 1/4" shell mill 90°

3106630 7 Coolant through 1.250" end mill body. Cylindrical shank with overall length 7.87". Holds four (4) TPKT inserts with 8mm DOC.

Accommodates inserts with ground and polished edge or t-land and hone for steel and SS. Corner radii from 0.016" to 0.79"

10 Iscar 2" shell mill 90° (short)

3106804 14 Coolant through face mill body.

Arbor hole style A. Holds five (5) screw clamped TPKT inserts. 0.512" DOC, cut diameter 2", and 1.57" overall length. Accommodates inserts with ground and polished edge or t-land and hone for steel and stainless steel; chip splitting, full wave, and medium positive edges with corner radiuses from .016 to .157"

11 Iscar 1 1/4" High Feed

3106834 7 Coolant through 1.250" fast feed end mill body. 17 degree lead angle.

Holds three (3) WXCU inserts with six (6) cutting edges. Overall length 8.450" and cutting diameters from 0.740" to 1.250". Weldon Shank

12 Iscar 3/4" Multi- Master 90° Head

3107028 7 Coolant through end mill body. Holds three (3) TCKT inserts with three (3) helical cutting edge and corner radius of 0.020". 0.075" cutting diameter, 0.200" DOC, and 1.27" overall length, with the MultiMaster T12 connection. Accommodates inserts with ground edge or t-land and hone for steel and SS.

13 Iscar 1"Multi- Master 90° Head

3107045 7 Coolant through end mill body.

MultiMaster T15 connection. Holds three (3) screw clamped TPKT inserts with three (3) helical cutting edges and corner radii from 0.016" to 0.79".

0.320 DOC, 1" cut diameter, and

1.77" overall length. Accommodates inserts with ground and polished edge or t-land and hone for steel and

SS.

14 Iscar 1/2" Multi-

(Finishing)

3107245 14 .500" carbide shank , 5.500" OAL, reduced neck to .480" dia to a length of 2.430" with the MultiMaster T08 connection.

15 Iscar 2" Feed Mill (short)

3107341 14 Coolant through face mill body.

Arbor hole style A. Holds five (5) screw clamped SOMT 12mm inserts with four (4) cutting edges. 0.059" DOC, 1.136" cut diameter, and 2" overall length. Accommodates inserts with edge prep for stainless steel, high temp material, alloy steel and cast iron.

16 Iscar 4" 9° Feed

3107344 7 Coolant through face mill body.

Arbor hole style B. Holds eight (8) screw clamped SOMT 12mm inserts with four (4) cutting edges. 0.059" DOC, minimum cut diameter 3.136", and 2"overall length. Accommodates inserts with edge prep for stainless steel, high temp materials, alloy steel and cast iron.

17 Iscar Drill 0.421 diameter (5D)

3202624 7 5xD drill body to hold replaceable heads ranging from 0.413"-0.429" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads.

Cylindrical shank and internal coolant holes.

18 Iscar Drill 0.875

(5D)

3202655 7 5xD drill body to hold replaceable heads ranging from 0.492"-0.508" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads.

19 Iscar Drill 0.562

(8D)

3202720 7 8xD drill body to hold replaceable heads ranging from 0.551"-0.567" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads.

20 Iscar Drill 0.562

(12D)

3202830 7 12xD drill body to hold replaceable heads ranging from 0.551"-0.567" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads.

21 Iscar Drill 0.492

(8D)

3203218 7 8xD drill body to hold replaceable heads ranging from 0.492"-0.508" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads.

22 Iscar Drill 0.492 diameter (5D)

3260145 7 5xD drill body to hold replaceable heads ranging from 0.492"-0.508" diameter. Accommodates ICN, ICP, ICK, ICM, HCP, FCP, ICP-2M, and QCP-2M indexable drill heads.

23 Iscar Fast Feed Inserts

3309414 180 WXCU shaped insert, double sided w/ three cutting edges per side, IC882 grade for machining of stainless and cast steel. TiAIN + TiN coating. Must be compatible with 1 1/4" high feed endmill (3106834).

24 Iscar 90° Inserts 3313135 540 Single sided triangle insert with three cutting edges. IC28 grade carbide;

uncoated and polished with super positive rake angle for cutting aluminum. Corner radius of 0.079", 0.630" wide and .236" thick.

25 Iscar Fast Feed

3323472 540 Single sided square insert with four cutting edges. IC808 grade carbide;

TiAlN/AlTiN+TiN coated for cutting of ferritic and martensitic stainless steel, cast iron, and hardened steel.

0.5" wide, .205" thick and 0.063" corner radius.

26 Iscar Fast Feed

3323473 360 Single sided square insert with four cutting edges. IC830 grade carbide;

TiAlN/AlTiN+TiN coated for cutting of austenitic stainless steel and high temp alloys. 0.5" wide, .205" thick and 0.063" corner radius.

27 Iscar 3/4" Shell Mill Holder

(4" L) HSK

A100

3325169 4 Coolant through, guaranteed concentricity less than .0002" and dynamically balanced to G2.5

28 Iscar 3/4" Shell

(6" L) HSK

A100

3325171 4 Coolant through, guaranteed

29 Iscar 1 1/2" Shell

(2.36" L)

HSK A100

3325177 6 Coolant through, guaranteed

30 Iscar Tool Insertion Key for 1"

MM

4305309 7 MultiMaster Key

31 Iscar High Speed Reamer Shank

4445505 7 Accommodates a 0.500" diameter Iscar Bayo high speed ream head.

Shank diameter of 0.625" with overall length of 6.15". Reduces to

0.406" diameter for minimum 4" length.

32 Iscar ER 32 Tapping Head

4500627 4 Tapping head with tension, compression, and radial float.

Mounts in a ER32 collet nut. Holds a 1/2" cut tap. .03" compression, .157" tension and .004" radial float.

33 Iscar 1 1/4" Endmill Holder

HSK A100

4502095 2 Coolant through, guaranteed concentricity less than .0002" and AT3 taper, 4.000" projection and 2.81" nose dia.

34 Iscar 1 1/4" Power Chuck CAT

4503954 15 Coolant through, guaranteed concentricity less than .00012" and AT3 taper.

35 Iscar 1 1/4" Power Chuck HSK A100

4504090 2 Coolant through, guaranteed concentricity less than .00012" and AT3 taper. 4.33" projection and 2.752" nose diameter.

36 Iscar 5/8" Tap Collet

4504316 10 Straight collet for power chuck, 0.625" dia

37 Iscar 3/4" Shell

(2" L)

CAT50

4509514 10 Coolant through, guaranteed

38 Iscar 3/4" Shell

(3.5" L)

CAT50

4509515 10 Coolant through, guaranteed

39 Iscar 1 1/2" Shell

CAT50

4509522 15 Coolant through, guaranteed

40 Iscar HSK A100 Coolant Tubes

4511691 20 1.732" overall length and M24X1.5 thread

41 Iscar 1 1/4"

Holder

CAT 50

4548058 5 Coolant through, guaranteed concentricity less than .0002" and AT3 taper, 4.000" projection and 2.75" nose dia.

42 Iscar 3/4" Hydraulic

HSK A100

Holder

4559392 4 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 4.134" projection and a 1.65" nose dia.

43 Iscar 1"

HSK A100

Holder

4559393 6 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 4.528" projection and a 1.97" nose dia.

44 Iscar 3/8"

CAT 50

Holder

4559614 10 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 2.834" projection and a 1.26" nose dia.

45 Iscar 1/2"

4559615 10 Coolant through, guaranteed concentricity less than .00012" and

CAT 50

Holder dynamically balanced to G2.5. 3.228" projection and a 1.26" nose dia.

46 Iscar 5/8" Hydraulic

CAT 50

Holder

4559616 30 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 3.15" projection and a 1.49" nose dia.

47 Iscar 3/4"

CAT 50

Holder

4559617 10 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 3.23" projection and a 1.65" nose dia.

48 Iscar 1"

CAT 50

Holder

4559619 20 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 3.23"

49 Iscar 1 1/4"

Holder

HSK A100

4559630 24 Coolant through, guaranteed concentricity less than .0002" and AT3 taper, 4.72" projection and 2.75" nose dia.

50 Iscar 1 1/4" X 3/8" Hydraulic Sleeve

4559646 4 1.25" OD, 0.375" OD, and 2.6" OAL.

Must be compatible with 1 1/4" hydraulic holders (4559630).

51 Iscar 1 1/4" X 1/2" Hydraulic Sleeve

4559647 4 1.25" OD, 0.25" OD, and 2.6" OAL.

52 Iscar 1 1/4" X 5/8" Hydraulic Sleeve

4559648 16 1.25" OD, 0.25" OD, and 2.6" OAL.

53 Iscar ER 32

Holder

HSK A100

4561015 2 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 4.000"

54 Iscar HSK A100 Cooling Tube Wrenches

4561259 5 Compatible with HSK A100 Coolant Tubes

55 Iscar ER 32

Holder

CAT 50

4590216 5 Coolant through, guaranteed concentricity less than .00012" and dynamically balanced to G2.5. 4.000" projection and a 1.968" nose dia.

56 Iscar Reamer Head

5190227 20 0.501" high performance reamer head. Compatible with high speed reamer shank 4445505. IC908 grade carbide with TiAlN coating for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. 6 flute with minimum 0.370" thickness/length.

57 Iscar 0.492" Diameter Self-

5567340 36 IC908 grade carbide. Compatible with drill bodies 3260145 and 3203218.

Centering Drill Head

58 Iscar 0.421" Diameter Self- Centering Drill Head

5567943 18 IC908 grade carbide. Compatible with drill body 3202624.

59 Iscar 0.563"

Self- Centering Drill Head

5567971 36 IC908 grade carbide. Compatible with drill bodies 3202720 and 3202830.

60 Iscar 0.874"

Flat Bottom Drill Head

5568181 18 IC908 grade carbide. Compatible with drill body 3202655.

61 Iscar High Feed

WXCU

Carbide Insert

5606379 360 Double sided with 6 cutting edges.

IC808 grade carbide for cutting of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel.

TiAlN/AlTiN+TiN coating. 0.246" IC, 0.122 thickness, and 0.038"

62 Iscar Chatter Free 3/8" Multi- Master Endmill

5606852 20 4 flute endmill with T06 threaded connection. IC908 grade carbide with TiAIN coating for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. Chatter free. 0.375" dimater with 0.500" minimum depth of cut.

63 Iscar 1/2" Multi-

High Feed Endmill

5606945 20 4 flute high feed endmill with T08 thread connection. IC903 grade carbide with TiAIN coating for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel.

0.024" minimum depth of cut.

64 Iscar HM390

TPKT

Insert for 90° Face Mill

5607513 360 Single sided triangle insert with three cutting edges. IC808 grade carbide;

TiAlN/AlTiN+TiN coated and for cutting low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. Corner radius of 0.031", 0.429" wide and .152" thick.

65 Iscar HM390

TPCR

Insert for 90° Face Mill

5607518 360 Single sided triangle insert with three cutting edges. IC28 grade carbide;

coated and polished with super positive rake angle for cutting aluminum. Corner radius of 0.031", 0.429" wide and .157" thick.

66 Iscar Insert for 50° Face Mill

5607524 180 Single sided square insert with eight cutting edges. IC5400 grade carbide with TiCN+Al2O3+TiN coating for cutting alloy and stainless steels.

Corner radius of 0.031", minimum 0.180" DOC, and .165" thick.

67 Iscar HM390

TDKT

Insert for 90° Face Mill

5607679 540 Single sided triangle insert with three cutting edges. IC808 grade carbide;

TiAlN/AlTiN+TiN coated and for cutting low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. Corner radius of 0.031", 0.429" wide and 0.152" thick.

68 Iscar HM390

TCKT

Insert for 90° Face Mill

5607773 180 Single sided triangle insert with three cutting edges. IC808 grade carbide;

TiAlN/AlTiN+TiN coated and for cutting low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. Corner radius of 0.020", 0.307" wide and 0.124" thick.

69 Iscar HM390

TCCT

Insert for 90° Face Mill

5607776 180 Single sided triangle insert with three cutting edges. IC380 grade carbide;

TiAlN/AlTiN+TiN coated and for cutting cast iron, high temperature alloys, titanium, and hardened steel.

Corner radius of 0.020", 0.307" wide and 0.124" thick.

70 Iscar 1/2" Multi-

Endmill

5621328 18 2 flute endmill with T08 threaded connection. IC08 grade uncoated carbide with for machining of aluminum. 0.500" diameter with 0.370" minimum depth of cut and 0.020" corner radius.

71 Iscar 3/8" Multi-

Endmill

5622000 18 2 flute endmill with T06 threaded connection. IC08 grade uncoated carbide with for machining of aluminum. 0.375" diameter with 0.270" minimum depth of cut and 0.000" corner radius.

72 Iscar 3/4" Multi-

Endmill

5622019 18 3 flute endmill with T12 threaded connection. IC08 grade uncoated carbide with for machining of aluminum. 0.375" diameter with 0.500" minimum depth of cut and 0.008" corner radius.

73 Iscar 1/2" Multi-

Endmill

5622603 18 4 flute endmill with T08 threaded connection. IC908 grade carbide coated with TiAlN for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. 0.500" diameter with 0.370" minimum depth of cut and 0.000" corner radius.

74 Iscar 3/4" Multi-

Endmill

5622605 18 4 flute endmill with T12 threaded connection. IC908 grade carbide coated with TiAlN for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel. 0.750" diameter with 0.620" minimum depth of cut and 0.000" corner radius.

75 Iscar 1" Multi-

Endmill

5622634 18 3 flute endmill with T15 threaded connection. IC08 grade uncoated carbide with for machining of aluminum. 1.000" diameter with 0.750" minimum depth of cut and 0.020" corner radius.

76 Iscar High Feed

WXCU

Carbide Insert

5666930 180 Double sided with 6 cutting edges.

IC808 grade carbide for cutting of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel.

TiAlN/AlTiN+TiN coating. 0.439" IC, 0.232" thickness, and 0.059"

77 Iscar Insert for 50° Face Mill

5667874 180 Single sided square insert with eight cutting edges. IC28 grade uncoated carbide for machining of aluminum.

Corner radius of 0.031", minimum 0.180" DOC, and .165" thick.

78 Iscar 3/8" Multi-

High Feed Endmill

5668259 18 4 flute high feed endmill with T06 thread connection. IC903 grade carbide with TiAIN coating for machining of low alloy steel, stainless steel, cast iron, high temperature alloys, titanium, and hardened steel.

0.018" minimum depth of cut.

79 Iscar Tool Insertion Key for

1/2" MM

7002616 7 MultiMaster Key

80 Iscar Tool Insertion Key for

3/8" MM

7002809 7 MultiMaster Key

81 Iscar Tool Insertion Key for

3/4" MM

7003308 7 MultiMaster Key

82 Garr Tool

Spot Drill 91390 40 5/8" diameter shank. Minimum 5" long. 140° cutting angle.

c. Cost/Price Factor:

Cost/Price Evaluation: The offeror’s cost/price proposal will be evaluated for award purposes by adding the total price for basic requirements (basic award).

Total Evaluated Price: Price analysis will be performed to determine the reasonableness of the offeror’s price proposal. Reasonableness will be based on the total evaluated price. The total evaluated price will be calculated as the sum of the Contract Line Item Numbers (CLINs) unit/extended prices plus other associated factors such as: first article testing cost, transportation cost, price evaluation adjustments for Small Disadvantaged Business Concerns, and application of labor hours to labor hour rates, etc.

Unreasonably Low Costs or Prices: Unreasonably low proposed costs or prices, initially or subsequently, may be grounds for eliminating a proposal from competition either on the basis that the offeror does not understand the requirement or the offeror has made an unrealistic proposal.

Unbalanced Pricing: Offerors are cautioned against submitting an offer that contains unbalanced pricing.

Unbalanced pricing may increase performance risk and could result in payment of unreasonably high prices.

Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more contract line items is significantly over or understated as indicated by the application of cost or price analysis techniques. The Government shall analyze offers to determine whether they are unbalanced with respect to separately priced line items or subline items. Offers that are determined to be unbalanced may be rejected if the contracting officer determines that the lack of balance poses an unacceptable risk to the Government.

6. Determination of Contractor Responsibility

To be eligible for award, an offeror must be determined responsible. A Determination of Contractor Responsibility will be conducted in accordance with FAR 9.1 (SAM and FAPIIS). An offeror who receives a determination of non-responsibility will not be eligible to receive the contract award.

7. Clarifications:

It is the Government’s intent to award without clarificatons; therefore, it is imperative that offerors submit their best terms initially. However, if during the evaluation period, it is determined to be in the best interest of the Government to hold clarifications, those clarifications will be considered in making the source selection decision.

8. SOLICITATION REQUIREMENTS, TERMS AND CONDITIONS

Offerors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors or sub-factors, and all technical specifications of the item description. Failure to meet a requirement may result in an offer being ineligible for award. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. In the case that a discrepancy exist between the Instruction to Offerors (ITO) and the evaluation factors for award, the evaluation criteria in 52.212-2 will take precedence.

(End of provision)

(End of Summary of Changes)