solicitation_test_chamber.doc

Section SF 1449 - CONTINUATION SHEET

Preventive Maintenance for the Corrosion

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, quality control, transportation, inspection manuals and credentials necessary to perform Annual Preventive Maintenance (PM) on the Singleton Corrosion Test Chamber at the Oklahoma City-Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS).

Period of Performance (POP): 15 October 15--14 October 16.

***Pricing: Pricing is for a Firm Fixed Price (FFP) to perform 1 each Preventative Maintenance visit annually for the Corrosion Test Chamber per the PWS.

**Total FFP $:

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:

DUNS NO:

POINT of CONTACT (POC) INSPECTION AND ACCEPTANCE

JennyLou Adkison 76 MXW/OBWK 405-736-4377

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

NSN: J066-15-GSC-SVCS

PURCHASE REQUEST NUMBER: F3YCEB5103AQ04

SIGNAL CODE: A

NET AMT

Over and Above Repair

FFP

IAW DFARS PGI 217.77, the contractor will submit a request to the PCO identifying the specific Parts of Repair Services as appropriate. The PCO Will issue an authorization describing the manner in which the O&A work will proceed. Pricing guidelines are listed below.

**The WAWF acceptor will not accept any billings that do not have PCO approval.**

PARTS: Parts will be priced with the appropriate (to be filled out by Contractor):__________________commercial listed price

TECHNICIAN TRAVEL/RENTAL CAR: Flat rate of $________________ per approved incident for Technician Travel time, Rental Car and Rental CAR associated Costs (Gas, Taxes, et al)

HOTEL, MEALS & INCIDENTALS: A flat rate of $_________________/day for approved incident days for Hotel costs (including all taxes and fees), Meals, tips, and any incidentals.

AIRFARE: Airfare is to be reimbursed at the total ticket cost for each approved incident (including any seat fee, baggage costs, taxes and associated charges authorized by the JFTR). First Class or Business Class is not authorized and will be reimbursed at the reconstructed Coach or standard class ticket price.

TECHNICIAN TIME: Technician repair time will be estimated in advance and PCO will give a “not to exceed” hour limit. If during the repair it is apparent that the hours will exceed the initial limit set by the PCO, additional PCO approval will be required. Technician’s time will be billed for the following rates:

M-F Regular rate: $_____________/hour

M-F Overtime rate: $________________/hour (worked hours must exceed 10 to be considered overtime in a given day

Weekend/Holiday rate:$____________________/hour

CONTRACTOR IS SAM REGISTERED

REGISTRATION IS VALID UNTIL:________________________________

DUNS NO:

FOB: Destination

NSN: J066-15-GSC-SVCS

PURCHASE REQUEST NUMBER: F3YCEB5103AQ04

NET AMT

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, quality control, transportation, inspection manuals and credentials necessary to perform Annual Preventive Maintenance (PM) on the Singleton Corrosion Test Chamber at the Oklahoma City-Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS).

Period of Performance (POP): 15 October 16--14 October 17.

***Pricing: Pricing is for a Firm Fixed Price (FFP) to perform 1 each Preventative Maintenance visit annually for the Corrosion Test Chamber per the PWS.

**Total FFP $:

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:

DUNS NO:

POINT of CONTACT (POC) INSPECTION AND ACCEPTANCE

JennyLou Adkison 76 MXW/OBWK 405-736-4377

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

NSN: J066-15-GSC-SVCS

NET AMT

FFP

IAW DFARS PGI 217.77, the contractor will submit a request to the PCO identifying the specific Parts of Repair Services as appropriate. The PCO Will issue an authorization describing the manner in which the O&A work will proceed. Pricing guidelines are listed below.

**The WAWF acceptor will not accept any billings that do not have PCO approval.**

PARTS: Parts will be priced with the appropriate (to be filled out by Contractor):__________________commercial listed price

TECHNICIAN TRAVEL/RENTAL CAR: Flat rate of $________________ per approved incident for Technician Travel time, Rental Car and Rental CAR associated Costs (Gas, Taxes, et al)

HOTEL, MEALS & INCIDENTALS: A flat rate of $_________________/day for approved incident days for Hotel costs (including all taxes and fees), Meals, tips, and any incidentals.

AIRFARE: Airfare is to be reimbursed at the total ticket cost for each approved incident (including any seat fee, baggage costs, taxes and associated charges authorized by the JFTR). First Class or Business Class is not authorized and will be reimbursed at the reconstructed Coach or standard class ticket price.

TECHNICIAN TIME: Technician repair time will be estimated in advance and PCO will give a “not to exceed” hour limit. If during the repair it is apparent that the hours will exceed the initial limit set by the PCO, additional PCO approval will be required. Technician’s time will be billed for the following rates:

M-F Regular rate: $_____________/hour

M-F Overtime rate: $________________/hour (worked hours must exceed 10 to be considered overtime in a given day

Weekend/Holiday rate:$____________________/hour

CONTRACTOR IS SAM REGISTERED

REGISTRATION IS VALID UNTIL:________________________________

DUNS NO:

FOB: Destination

NET AMT

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, quality control, transportation, inspection manuals and credentials necessary to perform Annual Preventive Maintenance (PM) on the Singleton Corrosion Test Chamber at the Oklahoma City-Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS).

Period of Performance (POP): 15 October 17--14 October 18.

***Pricing: Pricing is for a Firm Fixed Price (FFP) to perform 1 each Preventative Maintenance visit annually for the Corrosion Test Chamber per the PWS.

**Total FFP $:

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:

DUNS NO:

POINT of CONTACT (POC) INSPECTION AND ACCEPTANCE

JennyLou Adkison 76 MXW/OBWK 405-736-4377

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

NET AMT

FFP

IAW DFARS PGI 217.77, the contractor will submit a request to the PCO identifying the specific Parts of Repair Services as appropriate. The PCO Will issue an authorization describing the manner in which the O&A work will proceed. Pricing guidelines are listed below.

**The WAWF acceptor will not accept any billings that do not have PCO approval.**

PARTS: Parts will be priced with the appropriate (to be filled out by Contractor):__________________commercial listed price

TECHNICIAN TRAVEL/RENTAL CAR: Flat rate of $________________ per approved incident for Technician Travel time, Rental Car and Rental CAR associated Costs (Gas, Taxes, et al)

HOTEL, MEALS & INCIDENTALS: A flat rate of $_________________/day for approved incident days for Hotel costs (including all taxes and fees), Meals, tips, and any incidentals.

AIRFARE: Airfare is to be reimbursed at the total ticket cost for each approved incident (including any seat fee, baggage costs, taxes and associated charges authorized by the JFTR). First Class or Business Class is not authorized and will be reimbursed at the reconstructed Coach or standard class ticket price.

TECHNICIAN TIME: Technician repair time will be estimated in advance and PCO will give a “not to exceed” hour limit. If during the repair it is apparent that the hours will exceed the initial limit set by the PCO, additional PCO approval will be required. Technician’s time will be billed for the following rates:

M-F Regular rate: $_____________/hour

M-F Overtime rate: $________________/hour (worked hours must exceed 10 to be considered overtime in a given day

Weekend/Holiday rate:$____________________/hour

CONTRACTOR IS SAM REGISTERED

REGISTRATION IS VALID UNTIL:________________________________

DUNS NO:

FOB: Destination

NET AMT

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, quality control, transportation, inspection manuals and credentials necessary to perform Annual Preventive Maintenance (PM) on the Singleton Corrosion Test Chamber at the Oklahoma City-Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS).

Period of Performance (POP): 15 October 18--14 October 19.

***Pricing: Pricing is for a Firm Fixed Price (FFP) to perform 1 each Preventative Maintenance visit annually for the Corrosion Test Chamber per the PWS.

**Total FFP $:

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:

DUNS NO:

POINT of CONTACT (POC) INSPECTION AND ACCEPTANCE

JennyLou Adkison 76 MXW/OBWK 405-736-4377

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

NET AMT

FFP

IAW DFARS PGI 217.77, the contractor will submit a request to the PCO identifying the specific Parts of Repair Services as appropriate. The PCO Will issue an authorization describing the manner in which the O&A work will proceed. Pricing guidelines are listed below.

**The WAWF acceptor will not accept any billings that do not have PCO approval.**

PARTS: Parts will be priced with the appropriate (to be filled out by Contractor):__________________commercial listed price

TECHNICIAN TRAVEL/RENTAL CAR: Flat rate of $________________ per approved incident for Technician Travel time, Rental Car and Rental CAR associated Costs (Gas, Taxes, et al)

HOTEL, MEALS & INCIDENTALS: A flat rate of $_________________/day for approved incident days for Hotel costs (including all taxes and fees), Meals, tips, and any incidentals.

AIRFARE: Airfare is to be reimbursed at the total ticket cost for each approved incident (including any seat fee, baggage costs, taxes and associated charges authorized by the JFTR). First Class or Business Class is not authorized and will be reimbursed at the reconstructed Coach or standard class ticket price.

TECHNICIAN TIME: Technician repair time will be estimated in advance and PCO will give a “not to exceed” hour limit. If during the repair it is apparent that the hours will exceed the initial limit set by the PCO, additional PCO approval will be required. Technician’s time will be billed for the following rates:

M-F Regular rate: $_____________/hour

M-F Overtime rate: $________________/hour (worked hours must exceed 10 to be considered overtime in a given day

Weekend/Holiday rate:$____________________/hour

CONTRACTOR IS SAM REGISTERED

REGISTRATION IS VALID UNTIL:________________________________

DUNS NO:

FOB: Destination

NET AMT

FFP

The Contractor shall provide all labor, tools, equipment, test equipment, material, quality control, transportation, inspection manuals and credentials necessary to perform Annual Preventive Maintenance (PM) on the Singleton Corrosion Test Chamber at the Oklahoma City-Air Logistics Complex (OC-ALC). The Contractor shall also provide Personal Protective Equipment (PPE) and clothing, to include reflective clothing (belt, vest, etc); hearing and eye protection, to include prescription safety glasses; safety harnesses; fall protection equipment; lifting equipment and any incidentals necessary to perform the requirements of this Performance Work Statement (PWS).

Period of Performance (POP): 15 October 19--14 October 20.

***Pricing: Pricing is for a Firm Fixed Price (FFP) to perform 1 each Preventative Maintenance visit annually for the Corrosion Test Chamber per the PWS.

**Total FFP $:

CONTRACTOR IS SAM REGISTERED

REGISTRATION VALID IN SAM UNTIL:

DUNS NO:

POINT of CONTACT (POC) INSPECTION AND ACCEPTANCE

JennyLou Adkison 76 MXW/OBWK 405-736-4377

CONTRACTOR SHALL SUBMIT INVOICES IN ARREARS OF SERVICES THROUGH WIDE AREA WORKFLOW (WAWF), SEE CLAUSE 252-232-7006.

FOB: Destination

NET AMT

FFP

IAW DFARS PGI 217.77, the contractor will submit a request to the PCO identifying the specific Parts of Repair Services as appropriate. The PCO Will issue an authorization describing the manner in which the O&A work will proceed. Pricing guidelines are listed below.

**The WAWF acceptor will not accept any billings that do not have PCO approval.**

PARTS: Parts will be priced with the appropriate (to be filled out by Contractor):__________________commercial listed price

TECHNICIAN TRAVEL/RENTAL CAR: Flat rate of $________________ per approved incident for Technician Travel time, Rental Car and Rental CAR associated Costs (Gas, Taxes, et al)

HOTEL, MEALS & INCIDENTALS: A flat rate of $_________________/day for approved incident days for Hotel costs (including all taxes and fees), Meals, tips, and any incidentals.

AIRFARE: Airfare is to be reimbursed at the total ticket cost for each approved incident (including any seat fee, baggage costs, taxes and associated charges authorized by the JFTR). First Class or Business Class is not authorized and will be reimbursed at the reconstructed Coach or standard class ticket price.

TECHNICIAN TIME: Technician repair time will be estimated in advance and PCO will give a “not to exceed” hour limit. If during the repair it is apparent that the hours will exceed the initial limit set by the PCO, additional PCO approval will be required. Technician’s time will be billed for the following rates:

M-F Regular rate: $_____________/hour

M-F Overtime rate: $________________/hour (worked hours must exceed 10 to be considered overtime in a given day

Weekend/Holiday rate:$____________________/hour

CONTRACTOR IS SAM REGISTERED

REGISTRATION IS VALID UNTIL:________________________________

DUNS NO:

FOB: Destination

NET AMT

NOTES

1. CONTRACT HOLIDAYS

(a) The prices/costs in Section B of the contract holiday observances; accordingly, the Government will not be billed for such holidays, except when services are required by the Government and are actually performed on a holiday. Holidays in addition to those reflected in this contract, which are designated by the Government, will be billable provided the assigned Contractor employee was available for performance and was precluded from such performance.

(b) The following days are contract holidays: New Years Day, Martin Luther King, Jr. Day, President’s Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, Christmas Day.

2. “TRUCK ENTRY GATE” NOTICE

IMPORTANT DELIVERY INFORMATION

Tinker Air Force Base has constructed a “Truck Entry Gate” (Gate 33), which is located at the corner of 59th Street and Air Depot Blvd (southwest corner of the base). The gate will be opened beginning 15 September 2004.

Gate 33 shall be used for all deliveries by truck to this base.

(Trucks will not be allowed to gain access through any other gate.)

Since your firm’s delivery on this order is affected, please advise your delivery carrier to use the new gate. This should minimize the impact of your delivery.

DELIVERIES TO BUILDING 3001 (B / 3001)

Be advised that delivery vehicles destined for B / 3001 are prohibited from using “Staff Drive”.

Delivery vehicles may make deliveries only in designated unloading areas.

Since your firm’s delivery may be affected, ensure that your delivery carrier receives proper instructions on delivery / unloading requirements for B / 3001. Unloading in designated unloading areas will minimize any inconvenience, and, attendant ramifications, which may accrue, to your delivery / delivery carrier for failure to adhere to this requirement.

3. Contractor ID Badge Requirements

Contractors working on Tinker AFB shall comply with all procedures outlined in TAFBI 31-101, AFI 10-245 and TAFBP 31-101. OF SPECIAL NOTE, in accordance with TAFBI 31-101 para 5.3, all contractors/contractor personnel will be assessed a charge of $50.00 for each badge lost, willfully damaged, or not surrendered to Pass and Registration. No charge will be made on a replacement required due to normal wear. Personnel will report to Accounting and Finance, Accounts Receivable Unit and a DD Form 1131, Cash Collection Voucher, will be prepared and presented to Pass and Registration prior to issuing a replacement identification. Identification will be surrendered to Security Forces personnel upon demand for the purpose of identification, investigation, abuse, misuse, or for any other reason necessary. Civilian and military retirees who conduct commercial business on base must obtain a badge through their place of employment. ALSO OF SPECIAL NOTE, in accordance with TAFBI 31-101 para 7, all contractors/contractor personnel shall be subject to background checks as deemed necessary.

4. LIST OF ATTACHMENTS

FORM NR

DESCRIPTION

DATE

NR OF PAGES

Performance Work Statement

11 AUG 15

Appendix A-1 (76 MXSG)

08 JUN 15

Appendix A-2 (76 MXSS)

08 JUN 15

Wage Determination 2005-2431 Rev 20

08 July 15

INSURANCE

The following insurance amounts are required by FAR Clause 52.228-5 – Insurance Work on A Government Installation that is incorporated in full text in this solicitation.

(a) Workers’ compensation and employer’s liability. Contractors are required to comply with applicable Federal and State workers’ compensation and occupational disease statutes. If occupational diseases are not compensable under those statutes, they shall be covered under the employer’s liability section of the insurance policy, except when contract operations are so commingled with a contractor’s commercial operations that it would not be practical to require this coverage. Employer’s liability coverage of at least $100,000 shall be required, except in States with exclusive or monopolistic funds that do not permit workers’ compensation to be written by private carriers. (See 28.305(c) for treatment of contracts subject to the Defense Base Act.)

(b) General liability.

(1) The contracting officer shall require bodily injury liability insurance coverage written on the comprehensive form of policy of at least $500,000 per occurrence.

(2) Property damage liability insurance shall be required only in special circumstances as determined by the agency.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

14-OCT-2016

JENNY ADKISON

OC-ALC/OBWK

BLDG 3001 STAFF DR. DOOR G70 POST N68

TINKER AFB OK 73145

405-736-4377

FOB: Destination

F3YCEB

14-OCT-2016

F3YCEB

14-OCT-2017

F3YCEB

14-OCT-2017

F3YCEB

14-OCT-2018

F3YCEB

14-OCT-2018

F3YCEB

14-OCT-2019

F3YCEB

14-OCT-2019

F3YCEB

14-OCT-2020

F3YCEB

14-OCT-2020

F3YCEB

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.204-7 SYSTEM FOR AWARD MANAGEMENT (JULY 2013)

(a) Definitions. As used in this provision--

Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

Data Universal Numbering System +4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional System for Award Management records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same parent concern.

Registered in the System for Award Management SAM database means that--

(1) The offeror has entered all mandatory information, including the DUNS number or the DUNS+4 number, the Contractor and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see Subpart 4.14) into the SAM database;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in the SAM database;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

(b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS +4” followed by the DUNS or DUNS +4 number that identifies the offeror's name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.

(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.

(1) An offeror may obtain a DUNS number--

(i) Via the Internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office.

(2) The offeror should be prepared to provide the following information:

(i) Company legal business.

(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(iii) Company Physical Street Address, City, State, and Zip Code.

(iv) Company Mailing Address, City, State and Zip Code (if separate from physical).

(v) Company Telephone Number.

(vi) Date the company was started.

(vii) Number of employees at your location.

(viii) Chief executive officer/key manager.

(ix) Line of business (industry).

(x) Company Headquarters name and address (reporting relationship within your entity).

(d) If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) Offerors may obtain information on registration at https://www.acquisition.gov.

(End of clause)

52.204-13 SYSTEM FOR AWARD MANAGEMENT Maintenance (JULY 2013)

(a) Definitions. As used in this clause--

Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities, which is used as the identification number for Federal Contractors.

Data Universal Numbering System+4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at subpart 32.11) for the same concern.

Registered in the System for Award Management (SAM) database means that—

(1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, the Contractor and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see subpart 4.14), into the SAM database;

(2) The Contractor has completed the Core, Assertions, Representations and Certifications, and Points of Contact sections of the registration in the SAM database;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The Contractor will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

System for Award Management (SAM) means the primary Government repository for prospective Federal awardee and Federal awardee information and the centralized Government system for certain contracting, grants, and other assistance-related processes. It includes—

(1) Data collected from prospective Federal awardees required for the conduct of business with the Government;

(2) Prospective contractor-submitted annual representations and certifications in accordance with FAR subpart 4.12; and

(3) Identification of those parties excluded from receiving Federal contracts, certain subcontracts, and certain types of Federal financial and non-financial assistance and benefits.

(b) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis, from the date of initial registration or subsequent updates, its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document.

(c)(1)(i) If a Contractor has legally changed its business name, doing business as name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to—

(A) Change the name in the SAM database;

(B) Comply with the requirements of subpart 42.12 of the FAR; and

(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor shall provide with the notification sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph

(c)(1)(i) of this clause, or fails to perform the agreement at paragraph (c)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the ``Suspension of Payment'' paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see FAR subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the ``Suspension of Payment'' paragraph of the EFT clause of this contract.

(3) The Contractor shall ensure that the DUNS number is maintained with Dun & Bradstreet throughout the life of the contract. The Contractor shall communicate any change to the DUNS number to the Contracting Officer within 30 days after the change, so an appropriate modification can be issued to update the data on the contract. A change in the DUNS number does not necessarily require a novation be accomplished. Dun & Bradstreet may be contacted—

(i) Via the internet at http://fedgov.dnb.com/webform or if the

Contractor does not have internet access, it may call Dun and

Bradstreet at 1-866-705-5711 if located within the United States; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office.

(d) Contractors may obtain additional information on registration and annual confirmation requirements at https://www.acquisition.gov.

(End of clause)

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (APR 2014)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers:

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC

20407, Telephone (202) 619-8925, Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by--

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Data Universal Numbering System (DUNS) Number. (Applies to all offers exceeding $3,000, and offers of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database. The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS +4” followed by the DUNS or DUNS +4 number that identifies the offeror's name and address. The DUNS +4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. An offeror within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. An offeror located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The offeror should indicate that it is an offeror for a Government contract when contacting the local Dun and Bradstreet office.

(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (MAR 2015) ALTERNATE I (OCT 2014)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision.

(a) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology-

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled…