FA812214R0005_______0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

J

2. AMENDMENT/MODIFICATION NO.

FA8122-14-R-0005-0003

3. EFFECTIVE DATE

4. REQUISITION/PURCHASE REQ. NO.

FD20301302142 03

5. PROJECT NO (If applicable)

N/A

6. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFSC PZAAB

3001 STAFF DR STE 1AG1 98C

TINKER AFB OK 73145-3303

BUYER: Amanda McGovern/AFSC/PZAAB amanda.mcgovern.1@us.af.mil Phone: (405) 734- 8035 No Collect Calls

7. ADMINISTERED BY (If other than item 6) CODEFA8122

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA812214R0005

9B. DATED (SEE ITEM 11)

24-JAN-2014

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified. 26-MAY-2014 2:00 PM

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X

X X

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

Amendment/Modification FA8122-14-R-0005-0003

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

THIS AMENDMENT CHANGES THE REQUIREMENT TO A 3 YEAR BEQ.

Request for Proposal FA8122-14-R-0005-0003

SUPPLIES OR SERVICES AND PRICES/COSTS

The contractor shall furnish all required labor, facilities, equipment and all material to accomplish remanufacture to include test, packing, preservation, packaging and return to the Government in a completely serviceable condition the items of Air Force equipment listed below, all in accordance with (IAW) the provisions hereof and the Work Specifications attached.

REMANUFACTURE MAIN ENGINE CONTROL, F108 PART# 8062-469

BASIC Year Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-192-5419 PN 8062-469/9278M96

P09

NSN: 2915-01-192-5419 PN

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If torque motor is required utilize 60 days in lieu of 30 days.

REMANUFACTURE MAIN ENGINE CONTROL, F108 PART# 8063-216

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

6 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-454-3407 PN 8063-216/9278M96

P12

REMANUFACTURE MAIN ENGINE CONTROL, F108 PART# 8063-216

NSN: 2915-01-454-3407 PN

FUEL CONTROL,MAIN,T

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If

REMANUFACTURE MAIN ENGINE CONTROL, F108 PART# 8062-482

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-209-9046 PN 8062-482/9278M96

P10

NSN: 2915-01-209-9046 PN

FUEL CONTROL,MAIN,T

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If

DATA

NOT SEPERATELY PRICED

DATA

Data IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DDFORM 1423 EXHIBIT A ATTACHED AND

MADE A PART HEREOF.

MISHAP INVESTIGATION

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-192-5419 PN 8062-469/9278M96

P09

2915-01-454-3407 PN 8063-216/9278M96

P12

2915-01-209-9046 PN 8062-482/9278M96

P10 In accordance with A004 Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Type / Ship To Quantity (U/I) To be determined _ Req No / Pri Required Delivery

1 EA TBD

Proposed Delivery

1 EA

Option Year I

The contractor shall furnish all required labor, facilities, equipment and all material to accomplish remanufacture to include test, packing, preservation, packaging and return to the Government in a completely serviceable condition the items of Air Force equipment listed below, all in accordance with (IAW) the provisions hereof and the Work Specifications attached.

REMANUFACTURE MAIN ENGINE CONTROL, F108 PART# 8062-469

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-192-5419 PN 8062-469/9278M96

P09

NSN: 2915-01-192-5419 PN

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

6 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-454-3407 PN 8063-216/9278M96

P12

NSN: 2915-01-454-3407 PN

FUEL CONTROL,MAIN,T

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-209-9046 PN 8062-482/9278M96

P10

NSN: 2915-01-209-9046 PN

FUEL CONTROL,MAIN,T

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If

NOT SEPERATELY PRICED

Data IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DDFORM 1423 EXHIBIT A ATTACHED AND

MADE A PART HEREOF.

MISHAP INVESTIGATION

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

MISHAP INVESTIGATION

Group 001 Input 2915-01-192-5419 PN 8062-469/9278M96 P09

2915-01-454-3407 PN 8063-216/9278M96

P12

2915-01-209-9046 PN 8062-482/9278M96

P10

In accordance with A004 Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Type / Ship To Quantity (U/I) To be determined _ Req No / Pri Required Delivery

1 EA TBD

Proposed Delivery

1 EA

Option Year II

The contractor shall furnish all required labor, facilities, equipment and all material to accomplish remanufacture to include test, packing, preservation, packaging and return to the Government in a completely serviceable condition the items of Air Force equipment listed below, all in accordance with (IAW) the provisions hereof and the Work Specifications attached.

REMANUFACTURE MAIN ENGINE CONTROL, F108 PART# 8062-469

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-192-5419 PN 8062-469/9278M96

P09

NSN: 2915-01-192-5419 PN

Priority: R

Limitations of Liability: Other Than High Value Item

REMANUFACTURE MAIN ENGINE CONTROL, F108 PART# 8062-469

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

6 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-454-3407 PN 8063-216/9278M96

P12

NSN: 2915-01-454-3407 PN

FUEL CONTROL,MAIN,T

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

REMANUFACTURE MAIN ENGINE CONTROL, F108 PART# 8062-482

Group 001 Input 2915-01-209-9046 PN 8062-482/9278M96 P10

NSN: 2915-01-209-9046 PN

FUEL CONTROL,MAIN,T

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Combination of all CLINs, initial delivery of remanufactured units shall be 4 units 150 days after receipt of order, paperwork and hardware. 4 units every 30 days thereafter unless torque motor is required. If

NOT SEPERATELY PRICED

Data IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DDFORM 1423 EXHIBIT A ATTACHED AND

MADE A PART HEREOF.

MISHAP INVESTIGATION

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

1 EA

GROUP STOCK NO P/N CAGE

Group 001 Input 2915-01-192-5419 PN 8062-469/9278M96

P09

2915-01-454-3407 PN 8063-216/9278M96

P12

2915-01-209-9046 PN 8062-482/9278M96

P10 In accordance with A004 Priority: R

Limitations of Liability: Other Than High Value Item

MISHAP INVESTIGATION

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 __ ____ OR EQUIVALENT

Type / Ship To Quantity (U/I) To be determined _ Req No / Pri Required Delivery

1 EA TBD

Proposed Delivery

1 EA

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: A SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

N/A N/A

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a))

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(DEC 1991)

(IAW DFARS 205.470)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (DEC 2013)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(vi))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used.

The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2014)

(IAW FAR 12.301(b)(4))

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)).

__ __ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(2) 52.233-3, Protest After Award (Aug 1996)(31 U.S.C 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004)(Pub. L. 108-77, 108-78).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] __X __ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006), with Alternate I (Oct 1995)(41 U.S.C. 253g and 10 U.S.C. 2402).

__X __ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L.

110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

__ __ (3) 52.203-15, Whistleblower Protections Under the American Recovery and

Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5).

(Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

__X __ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note).

__ __ (5) 52.204-11, American Recovery and Reinvestment Act—Reporting Requirements (Jul 2010) (Pub. L. 111-15).

____ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L.

111-117, section 743 of Div. C).

____ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

__X __ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Aug 2013) (31 U.S.C. 6101 note).

__X __ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

__ __ (10) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (May 2012) (section 738 of Division C of Pub. L. 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161).

__ __ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011)(15 U.S.C. 657a).

__X __ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jan 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

(13) [Reserved] __ __ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011)(15 U.S.C. 644).

__ __ (14) (ii) Alternate I (Nov 2011).

__ __ (14) (iii) Alternate II (Nov 2011).

__ __ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003)(15 U.S.C.

644).

__ __ (15) (ii) Alternate I (Oct 1995) of 52.219-7.

__ __ (15) (iii) Alternate II (Mar 2004) of 52.219-7.

__X __ (16) 52.219-8, Utilization of Small Business Concerns (Jul 2013) (15 U.S.C. 637(d)(2) and (3)).

__X __ (17) (i) 52.219-9, Small Business Subcontracting Plan (Jul 2013)(15 U.S.C. 637(d)(4)).

(In accordance with DDP Memo dated 9 Sep 2013, DAR Tracking Number 2013-O0014, Class Deviation—Summary Subcontract Report Submission, this clause is replaced with DFARS Deviation dated Aug 2013. Effective until incorporated into the FAR or DFARS or until rescinded.)

__ __ (17) (ii) Alternate I (Oct 2001) of 52.219-9.

__X __ (17) (iii) Alternate II (Oct 2001) of 52.219-9.

__ __ (17) (iv) Alternate III (Jul 2010) of 52.219-9.

__ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

__ (19) 52.219-14, Limitations on Subcontracting (Nov 2011)(15 U.S.C. 637(a)(14)).

__X __ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C.

637(d)(4)(F)(i)).

__ __ (21) (i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged

Business Concerns (Oct 2008)(10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). (In accordance with DDP Memo dated 12 Mar 2010, DAR Tracking Number 2010-O0006, Immediate Cessation of the Use of Price Evaluation Adjustment for Small Disadvantaged Businesses, this clause is suspended in DoD. Effective until incorporated into the FAR or DFARS or until rescinded.)

__ __ (21) (ii) Alternate I (June 2003) of 52.219-23. (In accordance with DDP Memo dated 12 Mar 2010, DAR Tracking Number 2010-O0006, Immediate Cessation of the Use of Price Evaluation Adjustment for Small Disadvantaged Businesses, this clause is suspended in DoD. Effective until incorporated into the FAR or DFARS or until rescinded.)

__ __ (22) 52.219-25, Small Disadvantaged Business Participation Program—Disadvantaged Status and Reporting (Jul 2013)(Pub. L.

103-355, section 7102, and 10 U.S.C. 2323).

__ __ (23) 52.219-26, Small Disadvantaged Business Participation Program—Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C.

2323).

__ __ (24) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011)(15 U.S.C. 657 f).

__X __ (25) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).

__ __ (26) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (Jul 2013) (15 U.S.C. 637(m)).

__ __ (27) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (Jul 2013) (15 U.S.C.

637(m)).

__ __ (28) 52.222-3, Convict Labor (June 2003)(E.O. 11755).

__X __ (29) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan

2014)(E.O. 13126).

__X __ (30) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

__X __ (31) 52.222-26, Equal Opportunity (Mar 2007)(E.O. 11246).

__X __ (32) 52.222-35, Equal Opportunity for Veterans (Sep 2010)(38 U.S.C. 4212).

__X __ (33) 52.222-36, Affirmative Action For Workers with Disabilities (Oct 2010)(29 U.S.C.

793).

__X __ (34) 52.222-37, Employment Reports on Veterans (Sep 2010)(38 U.S.C. 4212).

__X __ (35) 52.222-40, Notification of Employee Rights Under the National Labor Relations

Act (Dec 2010) (E.O. 13496).

__ __ (36) 52.222-54, Employment Eligibility Verification (Aug 2013) (Executive Order

12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ __ (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008)(42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ _ (37) (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ __ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42.U.S.C. 8259b).

__ __ (39) (i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (Dec 2007) (E.O. 13423).

__ _ (39) (ii) Alternate I, (Dec 2007) of 52.223-16.

__X __ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving

(Aug 2011).

__ __ (41) 52.225-1, Buy American Act--Supplies (Feb 2009)(41 U.S.C. 10a-10d).

__ __ (42) (i) 52.225-3, Buy American Act--Free Trade Agreements--Israeli Trade Act (Novy

2012) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

__ _ (42) (ii) Alternate I (Mar 2012) of 52.225-3.

__ _ (42) (iii) Alternate II (Mar 2012) of 52.225-3.

__ _ (42) (iv) Alternate III (Nov 2012) of 52.225-3.

__ __ (43) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__X __ (44) 52.225-13, Restriction on Certain Foreign Purchases (Jun 2008)(E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of Treasury).

__ __ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

__ __ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007)(42 U.S.C.

5150).

__ __ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007)(42 U.S.C. 5150).

__ __ (48) 52.232-29, Terms for financing of Purchases of Commercial Items (Feb 2002)(41 U.S.C. 522(f), 10 U.S.C. 2307(f)).

__ __ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995)(41 U.S.C.

255(f), 10 U.S.C. 2307(f)).

__X __ (50) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Jul 2013)(31.U.S.C. 3332).

__ __ (51) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (Jul 2013)(31.U.S.C. 3332).

__ __ (52) 52.232-36, Payment by Third Party (Jul 2013 (31 U.S.C. 3332).

__ __ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996)(5 U.S.C. 552a).

__ __ (54) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb

2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

__ _ (54) (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] __ __ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

__ __ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C.

206 and 41 U.S.C. 351, et seq.).

__ __ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act--Price Adjustment

(Multiple Year and Option Contracts) (Sep 2009)(29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

__ __ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act - Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.).

__ __ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (Nov 2007) (41 U.S.C. 351 et seq.).

__ __ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services—Requirements (Feb 2009)(41 U.S.C. 351 et seq.).

__ __ (7) 52.222-17, Nondisplacement of Qualified Workers (Jan 2013) (E.O. 13495).

__ __ (8) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Mar 2009)

(Pub. L. 110-247).

__ __ (9) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C.

5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in paragraphs (e)(1) of this paragraph in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)).

(ii) 52.219-8, Utilization of Small Business Concerns (Jul 2013) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (Jan 2013) (E.O. 13495). Flow Down required in accordance with paragraph (l) of FAR clause 52.222-17.

(iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Veterans (Sep 20106) (38 U.S.C. 4212).

(vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793).

(vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(viii) 52.222-41, Service Contract Act of 1965 (Nov 2007),(41 U.S.C. 351, et seq.).

(ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104 (g)).

Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment—Requirements (Nov 2007)(41 U.S.C. 351, et seq.).

(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services—Requirements (Feb 2009) (41 U.S.C. 351, et seq.).

(xii) 52.222-54, Employment Eligibility Verification (Aug 2013).

(xiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L.

110-247). Flow down required in accordance with paragraphs (e) of FAR clause 52.226-6.

(xv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS) (AUG 2012)

(IAW DFARS 219.708(b)(1)(A)) (Applicable over $650,000)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)

(IAW DFARS 223.7306)

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM (DEC 2012)

(IAW DFARS 225.1101(2)(i))

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (FEB 2013)

(IAW DFARS 225.7002-3(a))

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (SEP 2004)

(IAW DFARS 226.104)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(JUN 2012)

(IAW DFARS 232.7004)

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .

(c) The Contractor may submit a payment request and receiving report using other than WAWF only when—

(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF;

(2) DoD is unable to receive a payment request or provide acceptance in electronic form;

(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer’s determination with each request for payment; or

(4) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System).

(d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract.

(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.

252.232-7009 MANDATORY PAYMENT BY GOVERNMENTWIDE COMMERCIAL PURCHASE CARD

(DEC 2006)

(IAW DFARS 232.1110)

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)

(IAW DFARS 232.7102)

252.237-7010 PROHIBITION ON INTERROGATION OF DETAINEES BY CONTRACTOR PERSONNEL

(JUN 2013)

(IAW DFARS 237.173-5)

252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (DEC 2012)

(IAW DFARS 243.205-71)

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013)

(IAW DFARS 246.371(a), DFARS 212.301(f)(xii))

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA (JUN 2013)

(IAW DFARS 247.574(b)(1))

252.247-7028 APPLICATION FOR U.S. GOVERNMENT SHIPPING

DOCUMENTATION/INSTRUCTIONS (JUN 2012)

(IAW DFARS 247.207)

PART I - THE SCHEDULE

SECTION H

SPECIAL CONTRACT REQUIREMENTS

TRANSPORTATION APPROPRIATION CHARGEABLE

The Transportation Allotment Identification (TAI) relates directly to the above ACRN(s). For example, the TAI “TAA” is for the same line item(s) as ACRN “AA”.

FMS TRANSPORTATION ALLOTMENT SHALL BE USED ONLY WHEN SHIPMENT ON GOVERNMENT BILL OF

LADING IS AUTHORIZED.

Insert 3 if movement via surface mode or 2 if movement via airlift in place of any “#” shown. Insert last digit of current fiscal year in place of any asterisk “*” shown when material is shipped.

TAI ATAC FMS ALLOTMENT/NOTE

TAA F2RS

ADDENDUM TO CLAUSE 52.212-4

5352.201-9101 OMBUDSMAN (NOV 2012)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, interested party may contact the ombudsman, AFSC/PZC at 405 736 -3273 , FAX 000 000 -0000 , email . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/HQ AFICA/AFISRA/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(Applicable to all solicitations and contracts)

52.202-1 DEFINITIONS (NOV 2013)

(IAW FAR 2.201)

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

(IAW FAR 3.808(b))

52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO

INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013)

(IAW FAR 3.908-9)

(Applicable to solicitations and contracts that exceed the simplified acquisition threshold)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

252.204-7012 SAFEGUARDING OF UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION

(NOV 2013)

(IAW DFARS 204.7303)

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)

(IAW FAR 9.206-2)

(b)

Item No Agency Name/Address

0001 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 98C

TINKER AFB, OK 73145-3303

0002 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 97E

TINKER AFB, OK 73145-3303

(405) 734-8035 Amanda.McGovern@tinker.af.mil

0003 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 97E

TINKER AFB, OK 73145-3303

(405) 734-8035 Amanda.McGovern@tinker.af.mil

1001 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 98C

TINKER AFB, OK 73145-3303

1002 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 97E

TINKER AFB, OK 73145-3303

(405) 734-8035 Amanda.McGovern@tinker.af.mil

1003 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 97E

TINKER AFB, OK 73145-3303

(405) 734-8035 Amanda.McGovern@tinker.af.mil

2001 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 98C

TINKER AFB, OK 73145-3303

2002 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 97E

TINKER AFB, OK 73145-3303

(405) 734-8035 Amanda.McGovern@tinker.af.mil

2003 DEPARTMENT OF THE AIR FORCE

3001 STAFF DR STE 1AG1 97E

TINKER AFB, OK 73145-3303

(405) 734-8035 Amanda.McGovern@tinker.af.mil

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name _____________________________

Manufacturer's Name ________________________

Source's Name _____________________________

Item Name _________________________________

Service Identification _________________________

Test Number _______________________________ (to the extent known)

(Applicable when the acquisition is subject to a qualification requirement)

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A TERRORIST COUNTRY (DEC 2006)

(IAW DFARS 209.409)

(Applicable when delivery of one or more “items” as defined at 252.211-7003(c) is required)

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

(IAW DFARS 211.274-6(B))

(Applicable when FAR 52.245-1, Government Property, is used)

252.211-7008 USE OF GOVERNMENT-ASSIGNED SERIAL NUMBERS (SEP 2010)

(IAW DFARS 211.274-6(c))

52.215-2 AUDIT AND RECORDS--NEGOTIATION (OCT 2010)

(IAW FAR 15.209(b)(1))

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 1, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of the BEQ of the ordering period;

(2) Any order for a combination of items in excess of the BEQ of the ordering period;; or

(3) A series of orders from the same ordering office within 10 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 7 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons.

Upon receiving this notice, the Government may acquire the supplies or services from another source.

(Applicable to all orders issued hereunder)

52.216-21 REQUIREMENTS (OCT 1995)

(IAW FAR 16.506(d)(1))

(f) the Contractor shall not be required to make any deliveries under this contract after completion of all deliveries IAW the last scheduled delivery of any outstanding order issued prior to the expiration date of the contract.

(Applicable to all orders issued hereunder)

252.216-7006 ORDERING (MAY 2011)

(IAW DFARS 216.506(a))

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from the date of award to five (5) years thereafter if all options are exercised.

(Applicable to solicitations and contracts when a definite-quantity contract, a requirements contract, or an indefinite-quantity contract is contemplated)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(IAW FAR 17.208(g))

(a) The Government may extend the term of this contract by written notice to the Contractor within 1 day ; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 60 months .

(Applicable when the Government gives the contractor a preliminary written notice of its intent to extend the contract, or an extension of the contract includes an extension of the option, or a there is a specified limitation on the total duration of the contract)

THE FOLLOWING IS FILL-IN DATA FOR CLAUSE 52.212-5 PARA (b)(10):

52.219-4 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZone SMALL BUSINESS

CONCERNS (JAN 2011)

(c) Waiver of evaluation preference.

__ Offeror elects to waive the evaluation preference.

THE FOLLOWING IS FILL-IN DATA FOR CLAUSE 52.212-5 PARA (b)(25):

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code _____________ assigned to contract number ______________________________.

[Contractor to sign and date and insert authorized signer's name and title].

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS) (DEVIATION

2013-O0014) (AUG 2013)

(IAW DARS Tracking # 2013-O0014)

[Class Deviation 2013-O0014 language:] “Summary Subcontract Report (SSR) Coordinator,” means the individual who is registered in eSRS at the Department of Defense (9700).

(h) (1) For DoD, the Contractor shall submit reports in eSRS as follows:

(i) The Individual Subcontract Report (ISR) shall be submitted to the contracting officer at the procuring contracting office, even when contract administration has been delegated to the Defense Contract Management Agency.

(ii) To submit the consolidated SSR for an individual subcontracting plan in eSRS, the contractor identifies the Government Agency in Block 7 (“Agency to which the report is being submitted”) by selecting the “Department of Defense (DoD) (9700)” from the top of the second dropdown menu. Do not select anything lower.

(2) For DoD, the authority to acknowledge receipt or reject reports in eSRS is as follows:

(i) The authority to acknowledge receipt or reject the ISR resides with the contracting officer who receives it, as described in paragraph (h)(1)(i) of this clause.

(ii) The authority to acknowledge receipt or reject SSRs in eSRS resides with the SSR Coordinator.

52.223-11 OZONE-DEPLETING SUBSTANCES (MAY 2001)

(IAW FAR 23.804(a))

(b) The Contractor shall label products which contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j(b), (c), and (d) and 40 CFR Part 82, Subpart E, as follows:

WARNING

Contains (or manufactured with, if applicable) ________________________*, a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.

*The Contractor shall insert the name of the substance(s).

(Applicable to solicitations and contracts for supplies, maintenance and repair services, or construction)

5352.223-9000 ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODSs)

(NOV 2012)

(IAW AFFARS 5323.804-90)

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (DEC 2012)

(IAW DFARS 225.1101(3))

252.225-7013 DUTY-FREE ENTRY (OCT 2013)

(IAW DFARS 225.1101(4))

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)

(IAW DFARS 225.7901-4)

52.227-1 AUTHORIZATION AND CONSENT (DEC 2007)

(IAW FAR 27.201-2(a)(1))

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT

(DEC 2007)

(IAW FAR 27.201-2(b))

52.229-3 FEDERAL, STATE, AND LOCAL TAXES (FEB 2013)

(IAW FAR 29.401-3(a))

52.230-3 DISCLOSURE AND CONSISTENCY OF COST ACCOUNTING PRACTICES (MAY 2012)

(IAW FAR 30.201-4(b)(1))

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)

(IAW FAR 32.111(b)(1))

52.232-11 EXTRAS (APR 1984)

(IAW FAR 32.111(c)(2))

52.232-17 INTEREST (OCT 2010)

(IAW FAR 32.611(a), FAR 32.611(b))

52.232-23 ASSIGNMENT OF CLAIMS (JAN 1986)

(IAW FAR 32.806(a)(1))

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)

(IAW FAR 32.706-3)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS

(DEC 2013)

(IAW FAR 32.009-2)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1))

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer:…