FA812115R0016.pdf

STANDARD FORM 1447 (2/2012)

Prescribed by GSA FAR (48 CFR) 53.215-1(d)

4. SOLICITATION NUMBER

FA8121-15-R-0016

X

6.SOLICITATION ISSUE DATE

8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOSB PROGRAM

HUBZONE SMALL

BUSINESS EDWOSB

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS NAICS CODE: 336412

8(A) SIZE STANDARD: 1,000

DATE SIGNED

28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER

SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

FMS REQUIREMENT

Routine Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.

SEE LINE ITEM SCHEDULE

22.

AMOUNT

16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253

FULL AND OPEN COMPETITION (c) ( ) (c) ( )

DATE SIGNED

27. SIGNATURE OF OFFEROR/CONTRACTOR

20.

UNIT

21.

UNIT PRICE

19.

QUANTITY

13. CONTRACTOR OFFEROR CODE FACILITY CODE

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR

DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9

ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS

SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND

CONDITIONS STATED HEREIN. *120

RATING

DO: A1

3. AWARD/EFFECTIVE DATE

FA8121

2. CONTRACT NO.

X

CHECK IF REMITTANCE IS DIFFERENT

AND PUT SUCH ADDRESS IN OFFER

17.

ITEM NO.

12. ADMINISTERED BY CODE

Estimated

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14 EFT:T

SCD:B

NAME AND TITLE OF SIGNER (TYPE OR PRINT) NAME OF CONTRACTING OFFICER

24. AWARD AMOUNT (FOR GOVT USE ONLY)

23. ACCOUNTING AND APPROPRIATION DATA

SEE SCHEDULE

5. SOLICITATION TYPE

SEALED BIDS NEGOTIATED

(IFB) (RFP)

15. PROMPT PAY DISCOUNT

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)

SUPPLIES SERVICES Aircraft Engine and Engine Parts Manufacturing

9.

LATE OFFERS ARE SUBJECT TO LATE PROPOSAL PROVISIONS INCORPORATED HEREIN. ALL OFFERS ARE SUBJECT TO SUCH PROVISIONS, REPRESENTATIONS, CERTIFICATIONS AND SPECIFICATIONS AS ARE ATTACHED OR INCORPORATED BY REFERENCE.

SOLICITATION: OFFERS WILL BE RECEIVED AT THE ISSUING OFFICE UNTIL

29-OCT-2015 3:00PM

18.

SCHEDULE OF SUPPLIES/SERVICES

14. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232-7003.)

X

7. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFSC PZAAA

3001 STAFF DR STE 1AF1 98C

TINKER AFB OK 73145-3303

BUYER: Dana L. Herndon/AFSC/PZAAA dana.herndon@us.af.mil Phone: (405) 734- 4629 Fax: (000) 000-0000 No Collect Calls

X

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.

J

SF 1447 (rev 2/2012) BACK

NO RESPONSE FOR THE REASONS CHECKED

TYPE OR PRINT NAME AND TITLE OF SIGNER

SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)

WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF

ITEMS INVOLVED

WE DO

OTHER (Specify)

CANNOT COMPLY WITH SPECIFICATIONS

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

FOLD

FOLD

SOLICITATION NO. FA812115R0016

DUE: 29 OCT 2015 3:00 PM

FROM: AFFIX

STAMP

HERE

TO:

ATTN: Dana Herndon/AFSC/PZAAA

DEPARTMENT OF THE AIR FORCE, AFSC PZAAA

3001 STAFF DR STE 1AF1 98C

TINKER AFB OK 73145-3303

Request for Proposal FA8121-15-R-0016

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

A Pre-Proposal Teleconference has been set up for 24 September 2015 at 2:00pm Central Standard Time (CST).

The call in number is 1-405-582-9999. The meeting ID is 7061#. The public is encouraged to join via conference call. This conference call will brief and explain any specifications and requirements for the solicitation.

This contract period of performance is for a 1 year basic and 4 one year option periods. This Firm Fixed Price Indefinite Delivery/Indefinite Quantity-Type Contract is for the remanufacture of items Specified in this Schedule and is outlined in the attachments thereto.

Qualification Requirements Apply: To be eligible for contact award, offeror must be approved source, in accordance with clause, Qualification Requirements. The Government is NOT required to delay contract award to review pending Source Approval Request (SAR). Therefore, offerors are encouraged to submit SARs, AS SOON AS POSSIBLE. If the Government has not completed review of a SAR when the contract is awarded the SAR will be retained and the source will be reviewed for possible source approval for future awards.

The Government reserves the right to adjust the Latest Cost Amount as reflected in this document either upward or downward at any time prior to and after contract award. Should the requirement for adjustment occur after award of the contract, the ACO/PCO will issue a unilateral modification to reflect the current Latest Cost Amount. The adjustment is not subject to negotiation.

The contractor shall furnish all required labor, direct material, parts, facilities, test equipment and services to accomplish remanufacture or condemnation, test, packaging, preservation, and return to the government in a completely serviceable condition, the items/services of Air Force equipment listed in Schedule B IAW the provisions hereof and the attached Statement of Work.

Accelerated Delivery is desirable and acceptable.

All serviceable units will be shipped from the contractor to the user using Fast Transportation.

Contractor/ ACO shall obtain authority to condemn any item from 421 SCMS/GUMAB through the PCO.

Condemnations will be replaced. Condemnations will not count towards deliveries. Condemnations are to be included in the unit price.

The contract will have a total contract minimum quantity of 5 each and a total contract maximum quantity of 200 each.

USAF and FMS Government Furnished Property Attachments located in Section J contain an incorrect contract number due to the template requiring a contract number input. There is no contract number at this point in time, but will be updated upon contract award.

Combustion Chamber USAF (Basic Year) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

30 EA

CLIN ACRN ACRN Total

0001 AA

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

Combustion Chamber USAF (Basic Year) - Remanufacturing

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0001

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2000

Buy American Act/Balance of Payments Program Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Class I ODS Substance Application/Use Quantity

None None None Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A SW3211 3 EA *60 Calendar Days

Proposed Delivery

A SW3211 3 EA

Combustion Chamber FMS (Basic Year) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

Combustion Chamber FMS (Basic Year) - Remanufacturing

2 EA

CLIN ACRN ACRN Total

0002 AB

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0002

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

ISO 9001-2008 2008

Foreign Military Sales Buy American Act/Balance of Payments Program Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Class I ODS Substance Application/Use Quantity None None None Type / Ship To PACRN Mark For

A TBD PAA

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A TBD 1 EA *60 Calendar Days

Proposed Delivery

A TBD 1 EA

DATA AND REPORTS

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount 1 LO Not Separately Priced Not Separately Priced

DATA AND REPORTS

IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DD FORM 1423 (EXHIBITS A) ATTACHED AND MADE A PART

HEREOF.

DATA AND REPORTS

Provide data reporting in accordance with DD Form 1423-1 [CDRLs, Contract Data Requirements List], DD Form 1664 [DIDs, Data Item Descriptions], and Attachment 3 [Table of Allowance] for ELIN report A001 Commercial Asset Visibility AF (CAV AF)/Government Furnished Material Report as detailed below.

For CLIN 0003 Basic Year, Option Year I, II, III, and IV, reference Exhibit A ELIN A001.

CLIN 0003

ELIN FREQUENCY

* TOTAL NUMBER OF

REPORTS

ANTICIPATED

UNIT PRICING PER

REPORT

TOTAL

PRICE

A001

Daily and/or within 24 hrs of a supply or maintenance action occurrence

TBD $ NSP $ NSP

* The award of any or all reports shall be at the sole discretion of the Government. The number of reports anticipated may or may not be ordered by the ACO. The Government reserves the right to delete from the bid each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20301136762 01 0003

Exhibit: A

Combustion Chamber USAF (Option Year I) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

30 EA

CLIN ACRN ACRN Total

1001 AA

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Combustion Chamber USAF (Option Year I) - Remanufacturing

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0001

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Class I ODS Substance Application/Use Quantity None None None

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A SW3211 3 EA *60 Calendar Days

Proposed Delivery

A SW3211 3 EA

Combustion Chamber FMS (Option Year I) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

1002 AB

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

Combustion Chamber FMS (Option Year I) - Remanufacturing

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0002

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Buy American Act/Balance of Payments Program Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Class I ODS Substance Application/Use Quantity None None None Type / Ship To PACRN Mark For

A TBD PAA

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A TBD 1 EA *60 Calendar Days

Proposed Delivery

A TBD 1 EA

Combustion Chamber USAF (Option Year II) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

30 EA

Combustion Chamber USAF (Option Year II) - Remanufacturing

CLIN ACRN ACRN Total

2001 AA

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0001

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Class I ODS Substance Application/Use Quantity None None None

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A SW3211 3 EA *60 Calendar Days

Proposed Delivery

A SW3211 3 EA

Combustion Chamber FMS (Option Year II) - Remanufacturing

Item No.

Firm Fixed Price

Combustion Chamber FMS (Option Year II) - Remanufacturing

Estimated Quantity

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

2002 AB

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0002

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Buy American Act/Balance of Payments Program Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Class I ODS Substance Application/Use Quantity None None None Type / Ship To PACRN Mark For

A TBD PAA

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A TBD 1 EA *60 Calendar Days

Proposed

A TBD 1 EA

Combustion Chamber USAF (Option Year III) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

30 EA

CLIN ACRN ACRN Total

3001 AA

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0001

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Class I ODS Substance Application/Use Quantity None None None

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A SW3211 3 EA *60 Calendar Days

Proposed

A SW3211 3 EA

Combustion Chamber FMS (Option Year III) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

3002 AB

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0002

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Buy American Act/Balance of Payments Program Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Class I ODS Substance Application/Use Quantity None None None Type / Ship To PACRN Mark For

A TBD PAA

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A TBD 1 EA *60 Calendar Days

Proposed

Combustion Chamber FMS (Option Year III) - Remanufacturing

A TBD 1 EA

Combustion Chamber USAF (Option Year IV) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

30 EA

CLIN ACRN ACRN Total

4001 AA

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0001

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Class I ODS Substance Application/Use Quantity None None None

Type / Ship To PACRN Mark For

A SW3211 PAA ACCT 09

Type / Ship To Quantity (U/I) *ARO Funded

Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required

Combustion Chamber USAF (Option Year IV) - Remanufacturing

A SW3211 3 EA *60 Calendar Days

Proposed Delivery

A SW3211 3 EA

Combustion Chamber FMS (Option Year IV) - Remanufacturing

Item No.

Firm Fixed Price Estimated Quantity

U/I Unit Price Total Estimated Cost

2 EA

CLIN ACRN ACRN Total

4002 AB

GROUP STOCK NO P/N CAGE

Group 001 Input 2840-01-448-6990 NZ 4083194 And/Or

2840-01-448-6990 NZ 4086420-01

GROUP STOCK NO P/N CAGE

Group 001 Output 2840-01-448-6990 NZ 4086420-01

NSN: 2840-01-448-6990 NZ

CHAMBER,COMBUSTION,

Sie/Dim: Approximately 30 inches round X 20 inches long. Function: The function of the combustion chamber is to take compressed air, mix it with fuel and then have the mixture ignited, which will create thrust. Predominant material of manufacture: Titanium Manufacturer Part Number

1LKE9 4086420-01

B6898 4086420-01 Associated Document(s) Line Item(s)

FD20301136762 01 0002

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Wide Area Work Flow (WAWF) Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Buy American Act/Balance of Payments Program Latest Cost Amount: $328,197.97

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A TBD ORIGIN

Class I ODS Substance Application/Use Quantity None None None Type / Ship To PACRN Mark For

A TBD PAA

Combustion Chamber FMS (Option Year IV) - Remanufacturing

Type / Ship To Quantity (U/I) *ARO Funded Order or Reparable Assets, Whichever is Later

_ Req No / Pri

Required Delivery

A TBD 1 EA *60 Calendar Days

Proposed Delivery

A TBD 1 EA

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: A TBD

TO BE DETERMINED 00000-0000

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A SW3211

DEF DISTRIBUTION DEPOT OF OKLAHOMA

CEN REC 3301 F AVE

BLDG 506 DR 22

TINKER AFB OK 73145-8000

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

(Applicable for supplies, services furnishing of supplies, fixed-price and exceeds the simplified acquisition threshold)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(IAW FAR 46.311, DFARS 246.202-4(1))

(a) The Contractor shall comply with the higher-level quality standard(s) listed below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring *See Individual Line Item Schedule

(Applicable only if specified in the individual order/call issued hereunder)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed-price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503) (Applicable to all orders issued hereunder)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.211-8 TIME OF DELIVERY (JUN 1997)

(IAW FAR 11.404(a)(2)) DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE ITEM.

(Applicable when the Government desires delivery by a certain time but requires delivery by a specified later time, and the delivery schedule is to be based on the date of the contract)

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)

(IAW FAR 11.703(b)) (Applicable when fixed-price supplies are furnished)

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1)) (Applicable for supplies, services, or research and development)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c)) (Applicable to fixed-price for supplies other than commercial or modified-commercial items)

52.247-29 F.O.B. ORIGIN (FEB 2006)

(IAW FAR 47.303-1(c)) (Applicable when specifying f.o.b. origin)

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c)) (Applicable to f.o.b. origin at contractor's facility)

52.247-55 F.O.B. POINT FOR DELIVERY OF GOVERNMENT-FURNISHED PROPERTY

(JUN 2003)

(IAW FAR 47.305-12(a)(2))

(Applicable when Government property is furnished and Government will be responsible for transportation arrangements and cost)

52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)

(IAW FAR 47.303-17(f)) (Applicable when specifying f.o.b. origin)

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b)) Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address

[CONTRACTOR FILL-IN]

(Applicable when delivery term is f.o.b. origin)

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Issue By DoDAAC Admin DoDAAC Inspect By DoDAAC Ship To Code Ship From Code

Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC Other DoDAAC(s) (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(Applicable when 252.232-7003 is used and neither 232.7003(b) nor (c) apply)

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA TO BE CITED ON EACH INDIVIDUAL ORDER $0.00

AB TO BE CITED ON EACH INDIVIDUAL ORDER $0.00

REFERENCE:

AA PR: FD2030-11-36762-01

AB PR: FD2030-11-36762-01

ACRN TOTAL $ 0.00

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

5352.201-9101 OMBUDSMAN (APR 2014)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, interested party may contact the ombudsman, AFSC/PZC at 405 736 -3273 , FAX 000 000 -0000 , email . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/HQ AFICA/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(Applicable to all solicitations and contracts)

52.202-1 DEFINITIONS (NOV 2013)

(IAW FAR 2.201)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

(Applicable when simplified acquisition threshold is exceeded, except for personal services and those between military departments or defense agencies and foreign governments that do not obligate any funds appropriated to the Department of Defense)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

(Applicable when simplified acquisition threshold is exceeded other than those for commercial items (see Parts 2 and 12))

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (MAY 2014)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

(Applicable when noncommercial and the simplified acquisition threshold is exceeded)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

(IAW FAR 3.808(b))

(Applicable over $150,000)

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (OCT 2015)

(IAW FAR 3.1004(a)) (Applicable to solicitations and contracts exceeding $5.5 million and the period of performance is greater than 120 days, unless for the acquisition of a commercial item under Part 12 or performed entirely outside the U.S.)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)

(IAW DFARS 203.570-3)

(Applicable when exceeding the simplified acquisition threshold (except for commercial items))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (DEC 2012)

(IAW DFARS 203.1004(a), DFARS 212.301(f)(iii)) (Applicable to solicitations and contracts when FAR 52.203-13 is included)

252.203-7004 DISPLAY OF FRAUD HOTLINE POSTERS (OCT 2015)

(IAW FAR 203.1004(b)(2)(ii))

(b) Display of fraud hotline poster(s).

(2) If the contract is funded, in whole or in part, by Department of Homeland Security (DHS) disaster relief funds, the DHS fraud hotline poster shall be displayed in addition to the DoD fraud hotline poster. If a display of a DHS fraud hotline poster is required, the Contractor may obtain such poster from:

[Contracting Officer shall insert the appropriate DHS contact information or Web site.]

(Applicable to acquisitions over $5.5 million, except for commercial items)

252.203-7999 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN

INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIAITON 2015-O0010) (FEB 2015)

(IAW DARS Tracking # 2015-O0010)

(Applicable to solicitations and contracts, including commercial under FAR part 12, that will use FY 2015 appropriations)

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (OCT 2015)

(IAW FAR 4.1403(a))

(Applicable over $30,000, unless not required to be reported in FPDS)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2015)

(IAW FAR 4.1804(c), FAR 12.301(d)) (Applicable when there is a requirement to be registered in SAM or to have a DUNS Number)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b)) (Applicable to all orders issued hereunder)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (SEP 2015)

(IAW DFARS 204.7304(c))

(Applicable to all solicitations and contracts, including commercial)

252.204-7015 DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS

(FEB 2014)

(IAW DFARS 204.7403(c), DFARS 212.301(f)(ix))

(Applicable to solicitations and contracts that involve litigation support services when 252.204-7014 is not included)

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(DEC 1991)

(IAW DFARS 205.470, DFARS 212.301(f)(x))

(Applicable over $1,000,000)

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)

(IAW FAR 9.206-2)

(a) Definition: "Qualification Requirement," as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award.

(b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification.

Item No Agency Name/Address

0001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

0002 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

1001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

1002 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

2001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

2002 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

3001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

3002 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

4001 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

4002 AFSC/SB

3001 STAFF DR STE 1AG85A

TINKER AFB, OK 73135-3009

(405) 739-7243 Joe.Roop@tinker.af.mil

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name ______________________________

Manufacturer's Name _________________________

Source's Name ______________________________

Item Name _________________________________

Service Identification _________________________

Test Number _______________________________ (to the extent known)

(d) Even though a product or service subject to a qualification requirement is not itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract. This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate this contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests.

(e) If an offeror, manufacturer, source, product, or service has met the qualification requirement but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interest, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification.

(f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award.

(The above Clause/Provision has been modified.)

(Applicable when the acquisition is subject to a qualification requirement)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(OCT 2015)

(IAW FAR 9.409)

(Applicable when exceeding $35,000)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING

RESPONSIBILITY MATTERS (JUL 2013)

(IAW FAR 9.104-7(c))

(Applicable to solicitations and contracts over $550,000 and contracts where the offeror has checked “has” in paragraph (b) clause 52.209-7)

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(OCT 2015)

(IAW DFARS 209.409)

(Applicable to solicitations and contracts with a value of $150,000 or more)

252.209-7010 CRITICAL SAFETY ITEMS (AUG 2011)

(IAW DFARS 209.270-5)

(b) Identification of critical safety items. One or more of the items being procured under this contract is an aviation or ship critical safety item. The following items have been designated aviation critical safety items or ship critical safety items by the designated design control activity:

Line Item Description

0001 Critical Safety Items (CSI)

0002 Critical Safety Items (CSI)

1001 Critical Safety Items (CSI)

1002 Critical Safety Items (CSI)

2001 Critical Safety Items (CSI)

2002 Critical Safety Items (CSI)

3001 Critical Safety Items (CSI)

3002 Critical Safety Items (CSI)

4001 Critical Safety Items (CSI)

4002 Critical Safety Items (CSI)

(Applicable to solicitations and contracts when the acquisition includes one or more items designated by the design control activity as critical safety items)

52.210-1 MARKET RESEARCH (APR 2011)

(IAW FAR 10.003)

(Applicable to solicitations and contracts over $5.5 million for the procurement of items other than commercial items)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

(Applicable to supplies that are not commercial items)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b)) This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(Applicable to all rated orders)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (DEC 2013)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(Applicable when delivery of one or more “items” as defined at 252.211-7003(c) is required)

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

(IAW DFARS 211.274-6(b), DFARS 212.301(f)(iv)) (Applicable when FAR 52.245-1, Government Property, is used)

52.215-2 AUDIT AND RECORDS--NEGOTIATION (OCT 2010)

(IAW FAR 15.209(b)(1)) (Applicable if negotiated and above the simplified acquisition threshold, except commercial items and utility services at public prices plus reasonable connection charge)

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h)) (Applicable when using uniform contract format that is not commercial or for construction)

52.215-14 INTEGRITY OF UNIT PRICES (OCT 2010)

(IAW FAR 15.408(f)(1)) (Applicable when negotiated and exceeding the simplified acquisition threshold)

52.216-18 ORDERING (OCT 1995)

(IAW FAR 16.506(a))

(a) Such orders may be issued from 90 days beyond the expiration of the order period unless otherwise agreed by the parties.

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 1, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of quantity of 200;

(2) Any order for a combination of items in excess of Not to exceed the maximum quantity as specified in Section B; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 30 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-22 INDEFINITE QUANTITY (OCT 1995)

(IAW FAR 16.506(e))

(d) Contractor shall not be required to make any deliveries under this contract after one (1) year after the effective date for the basic year or if applicable, one (1) year after any options that are exercised..

252.216-7006 ORDERING (MAY 2011)

(IAW DFARS 216.506(a))

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from 90 days beyond the expiration of the order period unless otherwise agreed by the parties.

(Applicable to solicitations and contracts when a definite-quantity contract, a requirements contract, or an indefinite-quantity contract is contemplated)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(IAW FAR 17.208(g))

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 Years

(The above Clause/Provision has been modified.)

52.219-4 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZone SMALL BUSINESS

CONCERNS (OCT 2014)

(IAW FAR 19.1309(b))

(c) Waiver of evaluation preference.

__ Offeror elects to waive the evaluation preference.

(Applicable when exceeding the simplified acquisition threshold)

52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS (OCT 2014)

(IAW FAR 19.708(a)) (Applicable when exceeding the simplified acquisition threshold, except for personal service contracts or when performance is entirely outside of the United States and its outlying areas)

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN -- ALTERNATE II (OCT 2001)

(IAW FAR 19.708(b)(1)) (Applicable over $650,000 when contracting by negotiation and subcontracting plans are required)

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN (DEVIATION 2013-O0014)

(AUG 2013)

(IAW DARS Tracking # 2013-O0014)

(2) SSR.

(i) Reports submitted under individual contract plans— [DFARS Deviation language:]

(C) If a prime Contractor and/or subcontractor is performing work for more than one executive agency, a separate report shall be submitted to each executive agency covering only that agency’s contracts, provided at least one of that agency’s contracts is over $650,000 (over $1.5 million for construction of a public facility) and contains a subcontracting plan. For DoD, a consolidated report shall be submitted for all contracts awarded by military departments/agencies and/or subcontracts awarded by DoD prime Contractors.

(D) The consolidated SSR shall be submitted annually for the twelve month period ending September 30. The report is due 30 days after the close of the reporting period.

(Applicable over $650,000)

52.219-16 LIQUIDATED DAMAGES--SUBCONTRACTING PLAN (JAN 1999)

(IAW FAR 19.708(b)(2)) (Applicable when FAR 52.219-9, Small Business Subcontracting Plan, or its Alternate I or Alternate II applies. IAW DFARS 219.708(b)(2), does not apply to DoD in contracts with contractors that have comprehensive subcontracting plans approved under the test program described in DFARS 219.702)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(IAW FAR 19.309(c))

(g) If the Contractor does not have representations…