FA811825R0098_______0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

J

2. AMENDMENT/MODIFICATION NO.

FA8118-25-R-0098-0002

3. EFFECTIVE DATE

5 NOV 2025

4. REQUISITION/PURCHASE REQ. NO.

FD20302501324 01

5. PROJECT NO (If applicable)

FA811825R0098

6. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFSC PZABB

3001 STAFF DR STE 1AC4 99A

TINKER AFB OK 73145-3303

BUYER: Morgan McGarity/AFSC/PZABB morgan.mcgarity@us.af.mil Phone: (405) 734- 4638 Fax: (000

7. ADMINISTERED BY (If other than item 6) CODEFA8118

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

CODE

X

9A. AMENDMENT OF SOLICITATION NO.

FA811825R0098

9B. DATED (SEE ITEM 11)

26-SEP-2025

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods. ( a ) By completing Items 8 and 15, and returning copies of the amendment; ( b ) By acknowledging receipt of this amendment on each copy of the offer submitted; or ( c ) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified. 8-DEC-2025 1:00 PM

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

BY ________________________________________________________

(Signature of person authorized to sign)

15C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA

BY ____________________________________________________

(Signature of Contracting Officer)

16C. DATE SIGNED

FACILITY CODE

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

30-105 STANDARD FORM 30 (REV. 10-83)

PRESCRIBED BY GSA

FAR (48 CFR) 53.243

X

X

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

FA8118-25-R-0098-0002

Continuation of block 14. DESCRIPTION OF AMENDMENT/MODIFICATION

The purpose of the solicitation amendment is to incorporate a revised Statement of Work dated 04 November 2025 and to extend the solicitation close date.

FIRST: A revised Statement of Work, dated 04 November 2025, is hereby attached and incorporated into the solicitation.

SECOND: The solicitation close date is hereby amended, as follows:

FROM: 24 November 2025 at 1:00 PM TO: 08 December 2025 at 1:00 PM

THIRD: All other terms and conditions remain in full force and effect.

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

In accordance with the attached CAV AF Reporting Requirements (see the document listed in Section J), the Contractor shall include a DD1348-1 when assets are shipped. DCMA Quality Assurance Representatives (QARs) will not approve or sign the DD1348-1, but will ensure a DD1348-1 is included with each returned asset. If a DD1348-1 is not included with each returned asset, DCMA will not sign the receiving report

(DD250).

Remanufacture of the T-38 Electro-Mech Actuator

A 5-YEAR FIRM FIXED PRICE INDEFINITE DELIVERY INDEFINITE QUANTITY (IDIQ), MULTIPLE AWARD (MAC) TYPE

CONTRACT IS CONTEMPLATED.

NOTE: It is anticipated that pricing of this action will be based on adequate price competition; therefore, offerors are not required to submit certified cost or pricing data at the time of proposal. However, if after receipt of proposals, it is determined that adequate price competition does not exist, a request for other than certified cost or pricing data may be required in accordance with FAR 15.403-1(b)(1).

52.232-18 Availability of Funds. As prescribed in 32.706-1(a), insert the following clause: Availability of Funds (Apr 1984)

Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer. (End of clause)

(a) A Pre-Award Survey and/or Initial Production Evaluation (IPE) is required. Details are provided in Appendix A, paragraphs 1.2 and 1.3 respectively.

(b) The contractor shall furnish all material, plant facilities, labor, parts, equipment, and expertise necessary to perform the remanufacture required to restore the end item to a like-new condition. The contractor shall also accomplish ALL necessary packing and preservation and packaging. ALL work shall be completed in accordance with the requirements specified herein (including attachments hereto) and all costs associated with work specifications, technical orders, and/or cost associated with Over and Above request (excluding missing parts) shall be included in the unit price. The government shall only pay the contractor for missing components after review and approval of O&A request. No additional cost will be allowed (i.e. material handling, profit, direct or indirect costs).

(c) Qualification requirements apply. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Tinker AFB Small Business Office. For questions regarding the Tinker SAR Process or related issues, these inquiries should be submitted to the TAFB Small Business Office at: AFSC/SB, 3001 Staff Drive, Suite 1AG 85A, Tinker AFB, OK 73145-3009. Email:

afsc.sb.workflow@us.af.mil Website: https://www.afsc.af.mil/units/sbo/index.asp. The actual SAR package submission itself shall be submitted electronically through DoD SAFE at https://safe.apps.mil/. DoD SAFE is a safe and secure option for large file submissions. If you have a PKI Certificate, the SAR can be sent directly to the email address below via DoD SAFE. If you do not have a PKI Certificate, then you must send a standard email message to the email address below and ask that they “Request a Drop-Off” to your email via DoD SAFE, which will enable you to be able to upload the SAR Submission Package documents to DoD SAFE.

429SCMS.SASPO.Workflow@us.af.mil

For more information on the Strategic Alternate Sourcing Program, please visit:

https://www.tinker.af.mil/Home/429SCMS-SASPO/

As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

(d) In order to receive any technical data related to this acquisition, offerors must send an email request to MORGAN MCGARITY at morgan.mcgarity@us.af.mil. Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO(s)), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at:

http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The Government is not responsible for incomplete, misdirected, or untimely requests.**

In order to receive drawings (previously done through JEDMICS), contractors will need to request access to the A-Team via a DD Form 2875. Requests will be made to wralc.tila.centra@us.af.mil . The PCO listed above will be the government sponsor for the DD Form 2875.

(e) GOVERNMENT PROPERTY FURNISHED FOR REPAIR (FAR 16.503(c)) Failure of the Government to furnish such items in the amounts or quantities described in the Schedule as “estimated” or “maximum” will not entitle the contractor to any equitable adjustment in price under the Government Property clause of the contract.

(f) END ITEMS BEYOND REMANUFACTURE "Reparable End Items" are defined as end items which can be restored to a serviceable condition, in accordance with applicable requirements. Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond the overhaul limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor prior to determination that such equipment is beyond these limits, shall be included in the unit price(s) of the listed item(s).

(g) If the contractor estimates that any item is not reparable (i.e. beyond remanufacture), the Contractor shall promptly notify the administrative contracting officer in writing and shall not perform further remanufacture on any such items except at the direction of the administrative contracting officer (ACO). Upon written confirmation from the ACO that a particular item is not reparable, the contractor shall dispose of the unit in the manner directed by the ACO.

Contractors are cautioned that until a contract is executed, any effort performed in support of the anticipated effort is performed strictly at their own risk and expense. There is no authorization to begin performance until the contractor has received a duly authorized contract signed by the Contracting Officer. Also, this request for proposal is not to be construed to mean that the award of a contract is assured, as the availability of funds, timely submission of all requested documents, and acceptance by both parties are prerequisite to any contract award.

(h) Condemned units shall not be counted as production.

(i) In the event there are component part(s) with long lead times, the awardee is responsible for securing necessary parts to meet the Government’s required delivery schedule.

(j) In the event that DFARS clause 252.217-7001, Surge Option, is invoked, quantities and prices will be negotiated at that time. The fill-in data in Clause 252.217-7001 will be TBD until a surge is known and negotiations are necessary.

(k) Item Unique Identification (IUID) marking is required in accordance with DFARS 252.211-7003. Contractor determined location and method of marking is acceptable.

(l) All quantities specified herein represent the total contract quantities for all five years combined. The ordering period for each line item shall extend from the contractual effective data to five years thereafter or until the maximum quantity for each line item is reached, whichever comes first. The minimum and maximum quantities for each line item are as follows:

Line Item 0001 NSN: 1680-00-872-7023 Minimum Quantity: 3 each Maximum Quantity: 250 each Line Item 0002 NSN: 1680-00-902-2196 Minimum Quantity: 3 each Maximum Quantity: 285 each

(m) This Solicitation contemplates award of a five-year Indefinite Delivery Indefinite Quantity (IDIQ) Type Contract.

Reference Clauses 52.216-19 – Delivery-Order Limitations, 52.216-22 – Indefinite Quantity and 252.216-7006 – Ordering.

(n) Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond the remanufacture limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor prior to determination that such equipment is beyond these limits, shall be included in the unit price(s) of the listed item(s).

(o) In accordance with DAFFARS 5309.105-1 the Supplier Performance Risk System (SPRS) is checked for supplier risk assessments when determining responsibility. DFARS 252.204.7303(b) states that the contracting officer shall verify that the summary level score of a current NIST SP 800-171 DoD Assessment (i.e., not more than 3 years old, unless a lesser time is specified in the solicitation) for each covered contractor information system that is relevant to an offer, contract, task order, or delivery order are posted in Supplier Performance Risk System (SPRS). Offerors are required to represent they will implement National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 SP 800-171 (reference the provision DFARS 252.204-7008). A score of 110 must be in SPRS, if assessment score is less than 110, contractors must submit a plan with their proposal to become compliant.

(p) Material Lay In: The contractor is responsible for the procurement, receipt, inspection, storage, and secure management of Government Furnished Property (GFP) material provided under this contract. This includes but is not limited to:

1. Verifying material upon receipt against provided documentation.

2. Adding all received materials to the GFP List.

3. Providing an initial inventory report to the Government and maintaining an updated inventory throughout the contract period.

4. Ensuring proper storage conditions to prevent damage or deterioration. Controlling access and preventing unauthorized use.

5. Using the material exclusively for the performance of this contract.

Remanufacture of T38 Electro-Mechanical Actuator

NSN: 1680-00-872-7023RK

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

Remanufacture of T38 Electro-Mechanical Actuator

NSN: 1680-00-872-7023RK

3 EA

Minimum Quantity

3 EA

Maximum Quantity

250 EA

CLIN ACRN ACRN Total

0001 AA

NSN: 1680-00-872-7023 RK

ACTUATOR,ELECTROMEC

Converts electrical energy into controlled rotary motion to operate an aircraft flaps system.

Manufacturer Part Number

0JRC1 3-74909-17

0T790 R1668-1

0XWR4 R1668-1

12511 R1668-1 29242 R1668-1

50LP4 R1668-1

58078 R1668-1 5H860 R1668-1 5Y609 R1668-1 76823 3-74909-17 81039 R1668-1 Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2015 __ ____

AS9100 9100

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

Special Marking Instructions Below

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For A SW3211 PAA Acct 09 Type / Ship To Quantity (U/I) *ARO 10ea Every

30 days ARO/REP Req No / Pri

Required Delivery

A SW3211 3 EA *30 Calendar Days

Proposed Delivery

A SW3211 3 EA

Early delivery is acceptable.

Remanufacture of T38 Electro-Mechanical Actuator

NSN:1680-00-902-2196RK

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

3 EA

Minimum Quantity

3 EA

Maximum Quantity

285 EA

CLIN ACRN ACRN Total

0002 AA

NSN: 1680-00-902-2196 RK

ACTUATOR,ELECTROMEC

Actuator used to actuate the aircraft flaps Manufacturer Part Number 0T790 817T100-1

0XWR4 817T100-1

12511 817T100-1 29242 817T100-1

50LP4 817T100-1

58078 817T100-1 5H860 817T100-1 5Y609 817T100-1 76823 3-74909-17 98889 817T100-1 Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2015 2015

AS9100 9100

Buy American Act/Balance of Payments Program IUID Required: Yes Physical Item Markings:

IAW MIL-STD-130

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For A SW3211 PAA Acct 09 Type / Ship To Quantity (U/I) *ARO 10ea Every

30 days ARO/REP Req No / Pri

Required Delivery

Remanufacture of T38 Electro-Mechanical Actuator

NSN:1680-00-902-2196RK

A SW3211 3 EA *30 Calendar Days

Proposed Delivery

A SW3211 3 EA

Early delivery is acceptable.

Over and Above

Item No.

To Be Negotiated Quantity U/I Unit Price

1 LO TBN

Over and Above

DESCRIPTION

“Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is –

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

“Over and above work” shall be performed IAW the Appendix A and DFARS clause 252.217-7028. The Government shall be the sole authority to determine whether over and above work is appropriate.

When over and above work is required a subCLIN shall be established on the order for authorization and funding. Delivery will be as negotiated between the Contractor and ACO/PCO.

FIXED PRICED ITEMS

At any time during contract performance, when sufficient data becomes available on a repetitive task being performed, either the Contractor or the Contracting Officer (Administrative or Procuring) may request a negotiation to establish a firm-fixed-price for that item for the remaining life of the contract.

Fixed priced items shall be defined as they are negotiated.

Priority: R

Data

Item No.

Not Separately Priced Quantity U/I Unit Price

Data

1 LO NSP

Data In accordance with the Requirements set forth on the DD Form 1423.

EXHIBIT

ITEM

NO.

RELATED

LINE ITEM

NO.

DATA ITEM DECRIPTION QTY FREQ

UNIT

PRICE

TOTAL

PRICE

A A001 0001, 0002 Commercial Asset Visibility (CAV) Reporting 1 DAILY NSP NSP

A A002 0001, 0002 Contract Depot Maintenance (CDM) Monthly Production Report

1 MTHLY NSP NSP

A A003 0001, 0002 Government Property (GP) Inventory Report 1 ANNLY NSP NSP

A A004 0001, 0002 Production Surge Plan 1 TBD NSP NSP

A A005 0001, 0002 Report of Shipping (Item) and Packaging Discrepancy

1 ASREQ NSP NSP

A A006 0001, 0002 Technical Data Package (TDP) 1 1 TIME NSP NSP

NSP = NOT SEPARATELY PRICED

SEE DFARS 252.204-7002, Payment for Subline Items Not Separately Priced

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete each line item of data and/or reports that the Government does not desire prior to and after final award.

Priority: R

Material Lay In

NSN: 1680-00-872-7023RK

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

CLIN ACRN ACRN Total

0005 AA

NSN: 1680-00-872-7023RK

ACTUATOR,ELECTROMEC

Priority: R Type / Ship To PACRN Mark For A SW3211 IAW Contract Type / Ship To Quantity (U/I) TBN Req No / Pri

Required Delivery

A SW3211 1 LO TBN

Proposed Delivery

A SW3211 1 LO

Refer to the preamble, paragraph (p), and section 7 of the Statement of Work for detailed information.

Material Lay In

NSN:1680-00-902-2196RK

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

CLIN ACRN ACRN Total

0006 AA

NSN:1680-00-902-2196RK

ACTUATOR,ELECTROMEC

Priority: R Type / Ship To PACRN Mark For A SW3211 IAW Contract Type / Ship To Quantity (U/I) TBN Req No / Pri

Required Delivery

A SW3211 1 LO TBN

Proposed Delivery

A SW3211 1 LO

Refer to the preamble, paragraph (p), and section 7 of the Statement of Work for detailed information.

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: A SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

TINKER AFB OK 73145-8000

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

PART I - THE SCHEDULE

SECTION D

PACKAGING AND MARKING

MIL-STD-130: Items shall be marked in accordance with MIL-STD-130. The National Stock Number (NSN), and when assigned, the Configuration Item Identifier (CII), serial number, and military type designation information shall be marked on major assemblies, units, groups, and sets. Special attention must be given to requirements governing the application of the actual manufacturer's Federal Supply Code for Manufacturers (FSCM) to the physical item. Items which are excluded in accordance with paragraph 1.1 of MIL-STD-130, Revision M, shall be marked in accordance with the appropriate document.

SPECIAL INSTRUCTIONS: Items shall be marked in accordance with: (See Individual Line Item)

2. PACKAGE AND CONTAINER MARKING: Shipments will not be made until the NSN has been assigned, unless specifically authorized by the Contracting Officer.

MIL-STD-129/ASTM-D-3951:

a. Interior packages and shipping containers shall be marked in accordance with MIL-STD-129 when Military packing is specified and ASTM-D-3951 when commercial packaging is specified. The requirements of paragraph 2.h apply regardless of which packaging is utilized.

(1) Design manufacturer's name, trademark or manufacturer's code (from Cataloging Handbook H4-1 or H4-2), identifying number, and serial number, when applicable, shall be included in the identification marking.

(2) When applicable, the Air Force project designator code shall be included as the last line of the address marking and the project name related to the project code shall be marked in the clear on the exterior shipping container.

b. Tags and labels, when required, shall be contractor's tags or labels conforming to the requirements of MIL-STD-129 or as approved by the procuring activity. Contractor's forms which indicate serviceable condition shall not be any shade of green or red. Labels are authorized to be used on metal containers. Items requiring technical order (T.O.)

certification shall be annotated on inner and outer container tags or label with T.O. compliance.

c. When dummy containers are used in a unitized load, the dummy containers shall be clearly marked "DUMMY CONTAINER" and located in the load so that the marking will be plainly visible to receiving and storage personnel.

d. All interior packages and shipping containers for articles and materials classified as hazardous or restricted under provisions of Title 49, Code of Federal Regulations, or AFR 71-4/DLAM 4145.3/TM 38-250/NAVSUP PUB 505/MCO P

4030.19 shall be marked, regardless of exemption for mode of transportation, with proper shipping name of item;

flash point of all liquids having a flash point of 200 degrees F. or below; and percentage concentration of acids and corrosive liquids. In addition, the quantity of each hazardous or restricted material included in a container shall be annotated adjacent to the shipping name of the item, e.g., Acetic Acid (80% concentration) -- 1 qt.

e. On shipments of firearms regardless of mode of transportation, selected elements of identification and contractor data markings shall be omitted or obliterated in accordance with the requirements of MIL-STD-129 regarding sensitive items and packing lists shall be placed only inside the containers.

f. Special markings for packages and containers when specified on AFMC Form 158 shall be complied with as a part of

MIL-STD-129.

g. All special coated terneplate containers shall be marked with the legend "CAUTION--DO NOT REUSE AS FOOD

CONTAINERS."

h. Bar code markings in accordance with MIL-STD-129 shall apply to all units, intermediate and exterior containers for all items going into stock regardless of package size or levels of package specified (including commercial packaging). In addition to the NSN/NATO stock number, the exterior shipping container shall include the 13 digit contract number (plus, if applicable, the four digit call number). Excluded from Bar Code Marking are:

(1) Foreign Military Sales.

(2) Direct Vendor Delivery (DVD)/Government Furnished Equipment (GFE) shipments.

(3) Multipack Exterior Shipping Containers. (Unit and intermediate containers do require a bar coded NSN/NATO stock number. However, the next container (unit or intermediate) inside the multipack will also require a bar coded NSN/NATO stock number and contract number with call number, if applicable, in the lower right hand corner).

(4) All unpacked or uncrated items; e.g., vehicles, tires, etc.

i. Shipments of wheeled items weighing 2,000 pounds or more and scheduled for transportation by military aircraft will be marked with the individual axle weights in accordance with MIL-STD-129.

3. WARRANTED ITEMS: When the contract contains warranty requirements, warranty information shall be applied on containers and items as follows:

a. Container markings shall be as specified in MIL-STD-129. The period or conditions of the warranty shall be specifically stated, i.e., landings, flight hours, operating hours, days from shipping date, etc.

b. Items shall be marked in accordance with requirements of MIL-STD-130. Markings shall be located in a manner so as to be conspicuous to the person removing the item from service. When no deleterious effect or functional degradation is caused, the markings shall be black letters on yellow FED-STD-595 color 13655) background. The marking shall include the same period or condition required on the containers.

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

(Applicable for supplies, services furnishing of supplies, fixed-price and exceeds the simplified acquisition threshold)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(IAW FAR 46.311, DFARS 246.202-4(1))

(a) The Contractor shall comply with the higher-level quality standard(s) listed below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring

*See Individual Line Item Schedule

(Applicable only if specified in the individual order/call issued hereunder)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed-price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503)

(Applicable to all orders issued hereunder)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)

(IAW FAR 11.703(b))

(Applicable when fixed-price supplies are furnished)

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1))

(Applicable for supplies, services, or research and development)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c))

(Applicable to fixed-price for supplies other than commercial or modified-commercial items)

52.247-29 F.O.B. ORIGIN (FEB 2006)

(IAW FAR 47.303-1(c))

(Applicable when specifying f.o.b. origin)

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c))

(Applicable to f.o.b. origin at contractor's facility)

52.247-55 F.O.B. POINT FOR DELIVERY OF GOVERNMENT-FURNISHED PROPERTY

(JUN 2003)

(IAW FAR 47.305-12(a)(2))

(Applicable when Government property is furnished and Government will be responsible for transportation arrangements and cost)

52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)

(IAW FAR 47.303-17(f))

(Applicable when specifying f.o.b. origin)

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b))

Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address

[CONTRACTOR FILL-IN]

(Applicable when delivery term is f.o.b. origin)

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

52.216-32 TASK-ORDER AND DELIVERY-ORDER OMBUDSMAN (SEP 2019)

(IAW FAR 16.506(j))

(a) In accordance with 41 U.S.C. 4106(g), the Agency has designated the following task-order and delivery-order Ombudsman for this contract. The Ombudsman must review complaints from the Contractor concerning all task-order and delivery-order actions for this contract and ensure the Contractor is afforded a fair opportunity for consideration in the award of orders, consistent with the procedures in the contract.

AFSC/PZC at 405 736 -3273 , FAX 000 000 - 0000 , email .

(b) Consulting an ombudsman does not alter or postpone the timeline for any other process (e.g., protests).

(c) Before consulting with the Ombudsman, the Contractor is encouraged to first address complaints with the Contracting Officer for resolution. When requested by the Contractor, the Ombudsman may keep the identity of the concerned party or entity confidential, unless prohibited by law or agency procedure.

(Applicable to multi award IDIQ contracts.)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC

Issue By DoDAAC

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(Applicable in solicitations and contracts or task or delivery orders, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, when 252.232-7003 is used and none of the exceptions at 232.7002(b)(1) apply. See PGI 232.7004 for instructions on completing the clause)

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA TO BE CITED ON EACH INDIVIDUAL ORDER $0.00

ACRN TOTAL $ 0.00

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

5352.201-9101 OMBUDSMAN (JUN 2023)

(IAW DAFFARS 5301.9103)

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern.

The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Susan Skaggs at 405-739-2372 Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Department of the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements.

Such inquiries shall be directed to the contracting officer.

(The above Clause/Provision has been modified.)

52.202-1 DEFINITIONS (JUN 2020)

(IAW FAR 2.201)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

(Applicable when simplified acquisition threshold is exceeded, except for personal services and those between military departments or defense agencies and foreign governments that do not obligate any funds appropriated to the Department of Defense)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

(Applicable when simplified acquisition threshold is exceeded other than those for commercial items (see Parts 2 and 12))

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020)

(IAW FAR 3.503-2)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020)

(IAW FAR 3.502-3)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

(Applicable when noncommercial and the simplified acquisition threshold is exceeded)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

(Applicable when the simplified acquisition threshold is exceeded)

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(JUN 2020)

(IAW FAR 3.808(b))

(Applicable over $150,000)

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (NOV 2021)

(IAW FAR 3.1004(a))

(Applicable to solicitations and contracts exceeding $5.5 million and the period of performance is greater than 120 days, unless for the acquisition of a commercial product or commercial service under Part 12 or performed entirely outside the U.S.)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS (JAN 2017)

(IAW FAR 3.909-3 (b))

(Applicable in all solicitations and resultant contracts other than personal services contracts with individuals)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

(Applicable to all solicitations and contracts)

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (JAN 2023)

(IAW DFARS 203.570-3)

(Applicable when exceeding the simplified acquisition threshold (except for commercial items))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(DEC 2022)

(IAW DFARS 203.970)

(Applicable to all solicitations and contracts)

252.203-7003 AGENCY OFFICE OF THE INSPECTOR GENERAL (AUG 2019)

(IAW DFARS 203.1004(a), DFARS 212.301(f)(iii))

(Applicable to solicitations and contracts when FAR 52.203-13 is included)

252.203-7004 DISPLAY OF HOTLINE POSTERS (JAN 2023)

(IAW DFARS 203.1004(b)(2)(ii))

(Applicable to acquisitions over $5.5 million, except for commercial items)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (JUN 2020)

(IAW FAR 4.1403(a))

(Applicable over $30,000, unless not required to be reported in FPDS)

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

(IAW FAR 4.1105(b))

(Applicable to solicitations that contain the provision at 52.204-7, and resulting contracts)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020)

(IAW FAR 4.1804(c), FAR 12.301(d))

(Applicable when there is a requirement to be registered in SAM or to have a DUNS Number)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

(Applicable to all solicitations and contracts)

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS

(NOV 2021)

(IAW FAR 4.1903)

(Applicable to all solicitations and contracts, except COTs, when a contractor’s system may contain Federal contract information)

52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES

DEVELOPED OR PROVIDED BY KASPERSKY LAB COVERED ENTITIES (DEC 2023)

(IAW FAR 4.2004)

(Applicable in all contracts and solicitations)

52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND

VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

(IAW 4.2105(b))

52.204-27 PROHIBITION ON A BYTEDANCE COVERED APPLICATION (JUN 2023)

(IAW FAR 4.2203)

(Applicable in all solicitations and contracts, unless an exception is granted in accordance with OMB Memorandum M-23-13)

52.204-28 FEDERAL ACQUISTION SUPPLY CHAIN SECURITY ACT ORDERS- FEDERAL

SUPPLY SCHEDULES, GOVERNMENT ACQUISITON CONTRACTS, AND

MULTI-AGENCY CONTRACTS (DEC 2023)

(IAW FAR 4.2306(a))

Applicable in all Federal Supply Schedules, Governmentwide acquisition contracts, and multi-agency contracts where FASCSA orders are applied at the order level.

52.204-30 FEDERAL ACQUISITION SUPPLY CHAIN SECURITY ACT ORDERS- PROHIBITION

(DEC 2023)

(IAW FAR 4.2306(c))

Applicable in solicitations and contracts if the conditions specified at 4.2304(a)(1) apply, except for Federal Supply Schedules, Governmentwide acquisition contracts, and multi-agency contracts.

252.204-7002 PAYMENT FOR SUBLINE ITEMS NOT SEPARATELY PRICED (APR 2020)

(IAW DFARS 204.7109(a))

(Applicable to all not separately priced subline items)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

(Applicable to all orders issued hereunder)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR

REPORTED CYBER INCIDENT INFORMATION (JAN 2023)

(IAW DFARS 204.7304(b))

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING DEVIATION 2024-O0013, REVISION 1 (MAY 2024)

(IAW Class Deviation 2024-O0013 Rev. 1)

Applicable in all solicitations and contracts except for the acquisition of COTS items.

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (JAN 2023)

(IAW DFARS 204.7403(b), DFARS 212.301(f)(i)(F))

(Applicable to solicitations and contracts that involve litigation support services when 252.204-7014 is not included)

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE

TELECOMMUNICATIONS EQUIPMENT OR SERVICES (JAN 2023)

(IAW DFARS 204.2105(c))

(Applicable to all solicitations.)

252.204-7020 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS (NOV 2023)

(IAW DFARS 204.7304(e))

(Applicable in all solicitations and contracts, task orders, or delivery orders, including those using FAR part 12 procedures for the acquisition of commercial items, except for those that are solely for the acquisition of COTS items)

252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement (JAN 2023) (IAW DFARS 204.7503(a) and 204.7503(b))

252.204-7022 EXPEDITING CONTRACT CLOSEOUT (MAY 2021)

(IAW DFARS 204.804-70)

(Applicable in solicitations and contracts when the contracting officer intends to expedite contract closeout through the mutual waiver of entitlement to a residual dollar amount of $1,000 or less determined at the time of contract closeout)

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(OCT 2024)

(IAW DFARS 205.470)

(Applicable over $1,500,000)

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995)

(IAW FAR 9.206-2)

(b)

Item No Agency Name/Address

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name _____________________________

Manufacturer's Name ________________________

Source's Name _____________________________

Item Name _________________________________

Service Identification _________________________

Test Number _______________________________ (to the extent known)

(Applicable when the acquisition is subject to a qualification requirement)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, PROPOSED FOR DEBARMENT, OR

VOLUNTARILY (JAN 2025)

(IAW FAR 9.409)

(Applicable when exceeding $35,000)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING RESPONSIBILITY

MATTERS (OCT 2018)

(IAW FAR 9.104-7(c))

(Applicable to solicitations and contracts over $550,000 and contracts where the offeror has checked “has” in paragraph (b) clause 52.209-7)

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

(IAW FAR 9.108-5(b))

(Applicable to all solicitations and contracts for the acquisition of products and services (including construction) unless waived

IAW FAR 9.108-4)

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(MAY 2019)

(IAW DFARS 209.409)

(Applicable to solicitations and contracts with a value of $150,000 or more)

252.209-7010 CRITICAL SAFETY ITEMS (AUG 2011)

(IAW DFARS 209.270-5)

(b) Identification of critical safety items. One or more of the items being procured under this contract is an aviation or ship critical safety item. The following items have been designated aviation critical safety items or ship critical safety items by the designated design control activity:

Line Item Description

0001 NSN: 1680-00-872-7023RK

0002 NSN:1680-00-902-2196RK

(Applicable to solicitations and contracts when the acquisition includes one or more items designated by the design control activity as critical safety items)

52.210-1 MARKET RESEARCH (NOV 2021)

(IAW FAR 10.003)

(Applicable to solicitations and contracts over $5.5 million for the procurement of items other than commercial products or commercial services)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.302)

(Applicable to supplies that are not commercial products)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b))

This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(Applicable to all rated orders)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(IAW DFARS 211.274-5(a), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(Applicable when delivery of one or more “items” as defined at 252.211-7003(c) is required)

52.215-2 AUDIT AND RECORDS--NEGOTIATION (JUN 2020)

(IAW FAR 15.209(b)(1))

(Applicable if negotiated and above the simplified acquisition threshold, except commercial items and utility services at public prices plus reasonable connection charge)

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h))

(Applicable when using uniform contract format that is not commercial or for construction)

52.215-14 INTEGRITY OF UNIT PRICES (NOV 2021)

(IAW FAR 15.408(f)(1))

(Applicable when negotiated and exceeding the simplified acquisition threshold)

52.216-18 ORDERING (AUG 2020)

(IAW FAR 16.506(a))

(a) Such orders may be issued from 26-JUN-2026 through 25-JUN-2031.

(Applicable to all orders issued hereunder)

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity of 3, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of quantity of 285;

(2) Any order for a combination of items in excess of quantity of 535; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 7 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(Applicable to all orders issued hereunder)

52.216-22 INDEFINITE QUANTITY (OCT 1995)

(IAW FAR 16.506(e))

(d) Contractor shall not be required to make any deliveries under this contract after 25-JUN-2032 .

(Applicable to all orders issued hereunder)

252.217-7001 SURGE OPTION (DEC 2018)

(IAW DFARS 217.208-70(b))

(a) General. The Government has the option to--

(1) Increase the quantity of supplies or services called for under this contract by no more than percent;

252.217-7028 OVER AND ABOVE WORK (DEC 1991)

(IAW DFARS 217.7702)

52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2020)

(IAW FAR 19.507(c))

(…