FA811816R0075.pdf

STANDARD FORM 1447 (2/2012)

Prescribed by GSA FAR (48 CFR) 53.215-1(d)

4. SOLICITATION NUMBER

FA8118-16-R-0075

6.SOLICITATION ISSUE DATE

8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOSB PROGRAM

HUBZONE SMALL

BUSINESS EDWOSB

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS NAICS CODE: 336413

8(A) SIZE STANDARD: 1250

DATE SIGNED

28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER

SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

Routine Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.

SEE LINE ITEM SCHEDULE

22.

AMOUNT

16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253

FULL AND OPEN COMPETITION (c) (1 ) (c) ( )

DATE SIGNED

27. SIGNATURE OF OFFEROR/CONTRACTOR

20.

UNIT

21.

UNIT PRICE

19.

QUANTITY

13. CONTRACTOR OFFEROR CODE FACILITY CODE

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR

DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9

ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS

SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND

CONDITIONS STATED HEREIN. *120

RATING

DO: A1

3. AWARD/EFFECTIVE DATE

FA8118

2. CONTRACT NO.

X

CHECK IF REMITTANCE IS DIFFERENT

AND PUT SUCH ADDRESS IN OFFER

17.

ITEM NO.

12. ADMINISTERED BY CODE

Estimated

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14 EFT:T

SCD:B

NAME AND TITLE OF SIGNER (TYPE OR PRINT) NAME OF CONTRACTING OFFICER

24. AWARD AMOUNT (FOR GOVT USE ONLY)

23. ACCOUNTING AND APPROPRIATION DATA

SEE SCHEDULE

5. SOLICITATION TYPE

SEALED BIDS NEGOTIATED

(IFB) (RFP)

15. PROMPT PAY DISCOUNT

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)

SUPPLIES SERVICES Other Aircraft Part and Auxiliary Equipment Manufacturing

9.

LATE OFFERS ARE SUBJECT TO LATE PROPOSAL PROVISIONS INCORPORATED HEREIN. ALL OFFERS ARE SUBJECT TO SUCH PROVISIONS, REPRESENTATIONS, CERTIFICATIONS AND SPECIFICATIONS AS ARE ATTACHED OR INCORPORATED BY REFERENCE.

SOLICITATION: OFFERS WILL BE RECEIVED AT THE ISSUING OFFICE UNTIL

20-JUL-2016 3:00PM

X

18.

SCHEDULE OF SUPPLIES/SERVICES

14. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232-7003.)

X

7. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFSC PZABB

3001 STAFF DR STE 1AC4 99A

TINKER AFB OK 73145-3303

BUYER: Sacia Fowler/AFSC/PZABB sacia.fowler@us.af.mil Phone: (405) 739- 4466 No Collect Calls

X

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.

J

SF 1447 (rev 2/2012) BACK

NO RESPONSE FOR THE REASONS CHECKED

TYPE OR PRINT NAME AND TITLE OF SIGNER

SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)

WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF

ITEMS INVOLVED

WE DO

OTHER (Specify)

CANNOT COMPLY WITH SPECIFICATIONS

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

FOLD

FOLD

SOLICITATION NO. FA811816R0075

DUE: 20 JUL 2016 3:00 PM

FROM: AFFIX

STAMP

HERE

TO:

ATTN: Sacia Fowler/AFSC/PZABB

DEPARTMENT OF THE AIR FORCE, AFSC PZABB

3001 STAFF DR STE 1AC4 99A

TINKER AFB OK 73145-3303

Request for Proposal FA8118-16-R-0075

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

REMANUFACTURE

(a) This is a remanufacture meeting the requirements at FAR 22.1003-6(a)(1).

The contractor shall furnish all material, plant facilities, labor, parts, equipment, and expertise necessary to perform the remanufacture required to restore the piece(s) of equipment to original life expectancy, or nearly so. The contractor shall also accomplish all necessary packing and preservation and packaging. ALL work shall be completed in accordance with the requirements specified herein (including attachments hereto) and at the unit price(s) established at the time of award.

(b) A Pre-Award Survey and/or Initial Production Evaluation (IPE) may be required. Details are provided in Appendix A, paragraphs 1.2 and 1.3 respectively.

As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

(c) This acquisition may involve technology that has a military or space application. The only contractors who may participate are those that are certified and registered with the Defense Logistics Information Service (DLIS) (1-800-352-3572) and have a legitimate business purpose. In order to receive any technical data related to this acquisition, offerors must be registered with Federal Business Opportunities (FedBizOpps) www.FBO.Gov.

Requests for data, drawings, and Technical Orders (TOs) are to be submitted directly to the PCO and/or buyer.

The request shall be on company letterhead and include the applicable solicitation number and the specific data needed (e.g. TO number, drawing number). The request must be accompanied by a copy of the current and approved DD Form 2345. The form, including instructions for completing the form, is available at:

http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html The Government is not responsible for incomplete, misdirected, or untimely requests.

(d) Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond the remanufacture limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor prior to determination that such equipment is beyond these limits, shall be included in the unit price(s) of the listed item(s).

(e) Condemned units shall not be counted as production.

(f) END ITEMS BEYOND REMANUFACTURE "Reparable End Items" are defined as end items which can be restored to a serviceable condition, in accordance with applicable requirements. If the contractor estimates that any item is not reparable (i.e. beyond remanufacture), the Contractor shall promptly notify the administrative contracting officer in writing and shall not perform further remanufacture on any such items except at the direction of the administrative contracting officer (ACO). Upon written confirmation from the ACO that a particular item is not reparable, the contractor shall dispose of the unit in the manner directed by the ACO.

(g) Failure of the Government to furnish such items in the amounts or quantities described in the Schedule as “estimated” or “maximum” will not entitle the contractor to any equitable adjustment in price under the Government Property clause of the contract.

REMANUFACTURE OF B-1B HEAT EXCHANGER

BASIC YEAR

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

12 EA

CLIN ACRN ACRN Total

0001 AA

NSN: 1660-01-180-5764 RK

HEAT EXCHANGER,AIR

The inter cooler is a plate and fin type exchanger which transfers heat from the coolant to the jet fuel by convection Aluminum and various materials.

Manufacturer Part Number

78943 UA537569-1

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $17,217.51

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

REMANUFACTURE OF B-1B HEAT EXCHANGER

BASIC YEAR

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

12 EA

CLIN ACRN ACRN Total

0002 AA

NSN: 1660-01-194-7780 RK

HEAT EXCHANGER,AIR

The heat exchanger cools fuel by transferring heat from the jet fuel to the external air by convection.

Steel, aluminum and various materials Manufacturer Part Number

78943 UA537570-1

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $19,279.59

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

OVER AND ABOVE

BASIC YEAR

Item No.

Firm Fixed Price Quantity U/I Unit Price Total Price

OVER AND ABOVE

BASIC YEAR

1 LO To be Negotiated To be Negotiated

OVER

OVER AND ABOVE

DESCRIPTION

“Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is—

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

Over and above work shall be performed IAW the Appendix A, DFARS clause 252.217-7028, and Section H, “Additional Over and Above Work Procedures”.

FIXED PRICED ITEMS

At any time during contract performance, when sufficient data becomes available on a repetitive task being performed, either the Contractor or the Contracting Officer (Administrative or Procuring) may request a negotiation to establish a firm-fixed-price for that item for the remaining life of the contract.

Fixed priced items shall be defined as they are negotiated.

Associated Document(s) Line Item(s)

FD20301500708 0003

DATA AND REPORTS

BASIC YEAR

Item No.

DATA

EXHIBIT A

RELATED LINE ITEMS 0001–0002

IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DD FORM 1423, ATTACHED AND MADE A PART HEREOF.

ITEM NO. FREQUENCY

* TOTAL NUMBER OF REPORTS

ANTICIPATED

UNIT PRICING PER

REPORT

TOTAL PRICE

A001 Daily TBD $ NSP $ NSP

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20301500708 0004

Exhibit: A

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR I

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

12 EA

CLIN ACRN ACRN Total

1001 AA

NSN: 1660-01-180-5764 RK

HEAT EXCHANGER,AIR

The inter cooler is a plate and fin type exchanger which transfers heat from the coolant to the jet fuel by convection Aluminum and various materials.

Manufacturer Part Number

78943 UA537569-1

Associated Document(s) Line Item(s)

FD20301500708 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $17,217.51

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR I

Item No.

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR I

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

12 EA

CLIN ACRN ACRN Total

1002 AA

NSN: 1660-01-194-7780 RK

HEAT EXCHANGER,AIR

The heat exchanger cools fuel by transferring heat from the jet fuel to the external air by convection.

Steel, aluminum and various materials Manufacturer Part Number

78943 UA537570-1

Associated Document(s) Line Item(s)

FD20301500708 0002

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $19,279.59

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

OVER AND ABOVE

OPTION YEAR I

Item No.

Firm Fixed Price Quantity U/I Unit Price Total Price 1 LO To be Negotiated To be Negotiated

OVER

OVER AND ABOVE

OPTION YEAR I

OVER AND ABOVE

DESCRIPTION

“Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is—

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

Over and above work shall be performed IAW the Appendix A, DFARS clause 252.217-7028, and Section H, “Additional Over and Above Work Procedures”.

FIXED PRICED ITEMS

At any time during contract performance, when sufficient data becomes available on a repetitive task being performed, either the Contractor or the Contracting Officer (Administrative or Procuring) may request a negotiation to establish a firm-fixed-price for that item for the remaining life of the contract.

Fixed priced items shall be defined as they are negotiated.

Associated Document(s) Line Item(s)

FD20301500708 0003

DATA AND REPORTS

OPTION YEAR I

Item No.

DATA

EXHIBIT B

RELATED LINE ITEMS 1001–1002

IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DD FORM 1423, ATTACHED AND MADE A PART HEREOF.

ITEM NO. FREQUENCY

* TOTAL NUMBER OF REPORTS

ANTICIPATED

UNIT PRICING PER

REPORT

TOTAL PRICE

B001 Daily TBD $ NSP $ NSP

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

FD20301500708 0004

Exhibit: B

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR II

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

12 EA

CLIN ACRN ACRN Total

2001 AA

NSN: 1660-01-180-5764 RK

HEAT EXCHANGER,AIR

The inter cooler is a plate and fin type exchanger which transfers heat from the coolant to the jet fuel by convection Aluminum and various materials.

Manufacturer Part Number

78943 UA537569-1

Associated Document(s) Line Item(s)

FD20301500708 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $17,217.51

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR II

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR II

12 EA

CLIN ACRN ACRN Total

2002 AA

NSN: 1660-01-194-7780 RK

HEAT EXCHANGER,AIR

The heat exchanger cools fuel by transferring heat from the jet fuel to the external air by convection.

Steel, aluminum and various materials Manufacturer Part Number

78943 UA537570-1

Associated Document(s) Line Item(s)

FD20301500708 0002

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $19,279.59

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

OVER AND ABOVE

OPTION YEAR II

Item No.

Firm Fixed Price Quantity U/I Unit Price Total Price 1 LO To be Negotiated To be Negotiated

OVER AND ABOVE

OVER AND ABOVE

OPTION YEAR II

DESCRIPTION

“Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is—

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

Over and above work shall be performed IAW the Appendix A, DFARS clause 252.217-7028, and Section H, “Additional Over and Above Work Procedures”.

FIXED PRICED ITEMS

At any time during contract performance, when sufficient data becomes available on a repetitive task being performed, either the Contractor or the Contracting Officer (Administrative or Procuring) may request a negotiation to establish a firm-fixed-price for that item for the remaining life of the contract.

Fixed priced items shall be defined as they are negotiated.

Associated Document(s) Line Item(s)

FD20301500708 0003

DATA AND REPORTS

OPTION YEAR II

Item No.

DATA

EXHIBIT C

RELATED LINE ITEMS 2001–2002

IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DD FORM 1423, ATTACHED AND MADE A PART HEREOF.

ITEM NO. FREQUENCY

* TOTAL NUMBER OF REPORTS

ANTICIPATED

UNIT PRICING PER

REPORT

TOTAL PRICE

C001 Daily TBD $ NSP $ NSP

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

Exhibit: C

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR III

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

12 EA

CLIN ACRN ACRN Total

3001 AA

NSN: 1660-01-180-5764 RK

HEAT EXCHANGER,AIR

The inter cooler is a plate and fin type exchanger which transfers heat from the coolant to the jet fuel by convection Aluminum and various materials.

Manufacturer Part Number

78943 UA537569-1

Associated Document(s) Line Item(s)

FD20301500708 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $17,217.51

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR III

Item No.

Firm Fixed Price Best

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR III

12 EA

CLIN ACRN ACRN Total

3002 AA

NSN: 1660-01-194-7780 RK

HEAT EXCHANGER,AIR

The heat exchanger cools fuel by transferring heat from the jet fuel to the external air by convection.

Steel, aluminum and various materials Manufacturer Part Number

78943 UA537570-1

Associated Document(s) Line Item(s)

FD20301500708 0002

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $19,279.59

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

OVER AND ABOVE

OPTION YEAR III

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Total Price

1 LO To be Negotiated To be Negotiated

OVER AND ABOVE

OPTION YEAR III

DESCRIPTION

“Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is—

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

Over and above work shall be performed IAW the Appendix A, DFARS clause 252.217-7028, and Section H, “Additional Over and Above Work Procedures”.

FIXED PRICED ITEMS

At any time during contract performance, when sufficient data becomes available on a repetitive task being performed, either the Contractor or the Contracting Officer (Administrative or Procuring) may request a negotiation to establish a firm-fixed-price for that item for the remaining life of the contract.

Fixed priced items shall be defined as they are negotiated.

Associated Document(s) Line Item(s)

FD20301500708 0003

DATA AND REPORTS

OPTION YEAR III

Item No.

DATA

EXHIBIT D

RELATED LINE ITEMS 3001–3002

IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DD FORM 1423, ATTACHED AND MADE A PART HEREOF.

ITEM NO. FREQUENCY

* TOTAL NUMBER OF REPORTS

ANTICIPATED

UNIT PRICING PER

REPORT

TOTAL PRICE

D001 Daily TBD $ NSP $ NSP

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

Exhibit: D

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR IV

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Estimated Total Price

12 EA

CLIN ACRN ACRN Total

4001 AA

NSN: 1660-01-180-5764 RK

HEAT EXCHANGER,AIR

The inter cooler is a plate and fin type exchanger which transfers heat from the coolant to the jet fuel by convection Aluminum and various materials.

Manufacturer Part Number

78943 UA537569-1

Associated Document(s) Line Item(s)

FD20301500708 0001

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $17,217.51

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR IV

Item No.

Firm Fixed Price Best

REMANUFACTURE OF B-1B HEAT EXCHANGER

OPTION YEAR IV

12 EA

CLIN ACRN ACRN Total

4002 AA

NSN: 1660-01-194-7780 RK

HEAT EXCHANGER,AIR

The heat exchanger cools fuel by transferring heat from the jet fuel to the external air by convection.

Steel, aluminum and various materials Manufacturer Part Number

78943 UA537570-1

Associated Document(s) Line Item(s)

FD20301500708 0002

Priority: R

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: WAWF Quality Assurance: Standard Inspection IUID Required: Yes Buy American Act/Balance of Payments Program Physical Item Markings:

Latest Cost Amount: $19,279.59

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A SW3211 ORIGIN

Type / Ship To PACRN Mark For

A SW3211 PAA

Type / Ship To Quantity (U/I) *ARO 1 ea per month beginning 30 days after receipt of a funded delivery order and/or reps.

Req No / Pri

Required Delivery

A SW3211 1 EA *30 Calendar Days

Proposed Delivery

A SW3211 1 EA

OVER AND ABOVE

OPTION YEAR IV

Item No.

Firm Fixed Price Best Estimated Qty

U/I Unit Price Total Price

1 LO To be Negotiated To be Negotiated

OVER AND ABOVE

OPTION YEAR IV

DESCRIPTION

“Over and above work” means work discovered during the course of performing overhaul, maintenance, and repair efforts that is—

(i) Within the general scope of the contract;

(ii) Not covered by the line item(s) for the basic work under the contract; and

(iii) Necessary in order to satisfactorily complete the contract.

Over and above work shall be performed IAW the Appendix A, DFARS clause 252.217-7028, and Section H, “Additional Over and Above Work Procedures”.

FIXED PRICED ITEMS

At any time during contract performance, when sufficient data becomes available on a repetitive task being performed, either the Contractor or the Contracting Officer (Administrative or Procuring) may request a negotiation to establish a firm-fixed-price for that item for the remaining life of the contract.

Fixed priced items shall be defined as they are negotiated.

Associated Document(s) Line Item(s)

FD20301500708 0003

DATA AND REPORTS

OPTION YEAR IV

Item No.

DATA

EXHIBIT E

RELATED LINE ITEMS 4001–4002

IN ACCORDANCE WITH THE REQUIREMENTS SET FORTH ON THE DD FORM 1423, ATTACHED AND MADE A PART HEREOF.

ITEM NO. FREQUENCY

* TOTAL NUMBER OF REPORTS

ANTICIPATED

UNIT PRICING PER

REPORT

TOTAL PRICE

E001 Daily TBD $ NSP $ NSP

The award of any or all reports shall be at the sole discretion of the Government. The Government reserves the right to delete from the bid price each line item of data and/or reports that the Government does not desire prior to and after final award.

Associated Document(s) Line Item(s)

Exhibit: E

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: A SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

NA

NA

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

For shipping instructions please contact the Production Management Specialist (PMS) Jennifer Williamson at jennifer.williamson@us.af.mil or 405-852-9021

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

(Applicable for supplies, services furnishing of supplies, fixed-price and exceeds the simplified acquisition threshold)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

(Applicable to the furnishing of supplies, services involving the furnishing of supplies, or research and development, when a fixed-price contract is contemplated and the contract amount is expected to exceed the simplified acquisition threshold)

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008)

(IAW DFARS 246.370)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503) (Applicable to all orders issued hereunder)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)

(IAW FAR 11.703(b)) (Applicable when fixed-price supplies are furnished)

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1)) (Applicable for supplies, services, or research and development)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c)) (Applicable to fixed-price for supplies other than commercial or modified-commercial items)

52.247-29 F.O.B. ORIGIN (FEB 2006)

(IAW FAR 47.303-1(c)) (Applicable when specifying f.o.b. origin)

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c)) (Applicable to f.o.b. origin at contractor's facility)

52.247-55 F.O.B. POINT FOR DELIVERY OF GOVERNMENT-FURNISHED PROPERTY

(JUN 2003)

(IAW FAR 47.305-12(a)(2))

(Applicable when Government property is furnished and Government will be responsible for transportation arrangements and cost)

52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)

(IAW FAR 47.303-17(f)) (Applicable when specifying f.o.b. origin)

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b)) Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address

[CONTRACTOR FILL-IN]

(Applicable when delivery term is f.o.b. origin)

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(a) Definitions. As used in this clause— “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov ; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/ .

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

____Invoice and Receiving Report_______________________________________________________ (Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

__Source___________________________________________________________ (Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC See Pg 1, Block 14 Issue By DoDAAC FA8118 Admin DoDAAC See Pg 1, Block 12 Inspect By DoDAAC Cognizant DCMA Office DoDAAC Ship To Code SEE SCHEDULE Ship From Code Contractor’s Facility Code Mark For Code SEE SCHEDULE Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

_jennifer.williamson@us.af.mil__________________________________________________________ (Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

__Contract Cognizant DCMA Admin_______________________________________________________ (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(The above Clause/Provision has been modified.)

(Applicable when 252.232-7003 is used and neither 232.7003(b) nor (c) apply)

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA TO BE CITED ON EACH INDIVIDUAL ORDER $0.00

ACRN TOTAL $ 0.00

PART I - THE SCHEDULE

SECTION H

SPECIAL CONTRACT REQUIREMENTS

GOVERNMENT PROPERTY FURNISHED FOR REPAIR (JUN 2004)

(IAW FAR 16.503(c)) Failure of the Government to furnish such items in the amounts or quantities described in the Schedule as "estimated" or "maximum" will not entitle the contractor to any equitable adjustment in price under the Government Property clause of the contract.

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

5352.201-9101 OMBUDSMAN (JUN 2016)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, AFSC/PZC at 405 736 -3273 , FAX 000 000 -0000 , email . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(Applicable to all solicitations and contracts)

52.202-1 DEFINITIONS (NOV 2013)

(IAW FAR 2.201)

(Applicable when the simplified acquisition threshold is exceeded)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

(Applicable when simplified acquisition threshold is exceeded, except for personal services and those between military departments or defense agencies and foreign governments that do not obligate any funds appropriated to the Department of Defense)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

(Applicable when simplified acquisition threshold is exceeded other than those for commercial items (see Parts 2 and 12))

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (SEP 2006)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (MAY 2014)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

(Applicable when noncommercial and the simplified acquisition threshold is exceeded)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(OCT 2010)

(IAW FAR 3.808(b))

(Applicable over $150,000)

52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO

INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (APR 2014)

(IAW FAR 3.908-9)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)

(IAW DFARS 203.570-3)

(Applicable when exceeding the simplified acquisition threshold (except for commercial items))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

252.203-7997 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN

INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2016-O0003)

(OCT 2015)

(IAW DARS Tracking # 2016-O0003)

(a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.

(b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect.

(c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information.

(d) (1) Use of funds appropriated (or otherwise made available) by the Continuing Appropriations Act, 2016 (Pub. L. 114-53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in sections 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause.

(2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause.

(Applicable to solicitations and contracts, including commercial under FAR part 12, that will use FY 2016 appropriations)

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (OCT 2015)

(IAW FAR 4.1403(a))

(Applicable over $30,000, unless not required to be reported in FPDS)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2015)

(IAW FAR 4.1804(c), FAR 12.301(d)) (Applicable when there is a requirement to be registered in SAM or to have a DUNS Number)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS

(JUN 2016)

(IAW FAR 4.1903)

(Applicable to all solicitations and contracts, except COTs, when a contractor’s system may contain Federal contract information)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b)) (Applicable to all orders issued hereunder)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (DEC 2015)

(IAW DFARS 204.7304(c))

(Applicable to all solicitations and contracts, including commercial)

252.204-7014 LIMITATIONS ON THE USE OR DISCLOSURE OF INFORMATION BY LITIGATION

SUPPORT CONTRACTORS (MAY 2016)

(IAW DFARS 204-7403(b), DFARS 212.301(f)(viii))

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (MAY 2016)

(IAW DFARS 204.7403(c), DFARS 212.301(f)(ix))

(Applicable to solicitations and contracts that involve litigation support services when 252.204-7014 is not included)

252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS

(DEC 1991)

(IAW DFARS 205.470, DFARS 212.301(f)(x))

(Applicable over $1,000,000)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(OCT 2015)

(IAW FAR 9.409)

(Applicable when exceeding $35,000)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING

RESPONSIBILITY MATTERS (JUL 2013)

(IAW FAR 9.104-7(c))

(Applicable to solicitations and contracts over $550,000 and contracts where the offeror has checked “has” in paragraph (b) clause 52.209-7)

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

(IAW FAR 9.108-5(b))

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(OCT 2015)

(IAW DFARS 209.409)

(Applicable to solicitations and contracts with a value of $150,000 or more)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

(Applicable to supplies that are not commercial items)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b)) This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(Applicable to all rated orders)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii))

(a) Definitions. As used in this clause—

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html .

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

See Schedule as Applicable

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or Exhibit Line Item Number

Item Description

*Items less than $5000, which require UID, will be specifically identified in the schedule.

See Schedule as Applicable

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable).

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable).

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/ .

(2) Embedded items shall be reported by one of the following methods—

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(Applicable when delivery of one or more “items” as defined at 252.211-7003(c) is required)

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

(IAW DFARS 211.274-6(b), DFARS 212.301(f)(iv)) (Applicable when FAR 52.245-1, Government Property, is used)

52.215-2 AUDIT AND RECORDS--NEGOTIATION (OCT 2010)

(IAW FAR 15.209(b)(1)) (Applicable if negotiated and above the simplified acquisition threshold, except commercial items and utility services at public prices plus reasonable connection charge)

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h)) (Applicable when using uniform contract format that is not commercial or for construction)

52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA

(AUG 2011)

(IAW FAR 15.408(b))

(Applicable if negotiated and exceeding $750,000, when certified cost or pricing data is required)

52.215-12 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA (OCT 2010)

(IAW FAR 15.408(d)) (Applicable if negotiated and exceeding $750,000, when FAR 52.215-10, Price Reduction for Defective Certified Cost or Pricing Data, is included, and certified cost or pricing data is required)

52.215-14 INTEGRITY OF UNIT PRICES (OCT 2010)

(IAW FAR 15.408(f)(1)) (Applicable when negotiated and exceeding the simplified acquisition threshold)

52.215-14 INTEGRITY OF UNIT PRICES -- ALTERNATE I (OCT 1997)

(IAW FAR 15.408(f)(2)) (Alternate I is applicable when negotiated and exceeding the simplified acquisition threshold and contracting was without full and open competition)

52.215-15 PENSION ADJUSTMENTS AND ASSET REVERSIONS (OCT 2010)

(IAW FAR 15.408(g)) (Applicable exceeding $750,000, when certified cost or pricing data is required, or for which any preaward or postaward cost determinations are subject to Part 31)

52.215-18 REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS

(PRB) OTHER THAN PENSIONS (JUL 2005)

(IAW FAR 15.408(j))

(Applicable exceeding $750,000 when cost or pricing data is required, or for which any preaward or postaward cost

52.215-19 NOTIFICATION OF OWNERSHIP CHANGES (OCT 1997)

(IAW FAR 15.408(k)) (Applicable exceeding $750,000 when certified cost or pricing data is required, or for which any preaward or postaward cost

52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS (OCT 2010)

(IAW FAR 15.408(m))

52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (OCT 2009)

(IAW FAR 15.408(n)(2)) (Applicable to orders issued hereunder)

252.215-7000 PRICING ADJUSTMENTS (DEC 2012)

(IAW DFARS 215.408(1))

(Applicable when certified cost or pricing data may be required from the contractor or any subcontractor)

252.215-7002 COST ESTIMATING SYSTEM REQUIREMENTS (DEC 2012)

(IAW DFARS 215.408(2))

(Applicable to any order awarded on the basis of certified cost or pricing data)

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than quantity(1), the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of CLIN estimated quantity;

(2) Any order for a combination of items in excess of estimated quantity on each CLIN; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 30 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-21 REQUIREMENTS (OCT 1995)

(IAW FAR 16.506(d)(1))

(f) the Contractor shall not be required to make any deliveries under this contract after delivery of all requirements on each order outstandingcompletion of all deliveries IAW the delivery schedule of any outstanding order(s) issued prior to the expiration date of the ordering period or as otherwise agreed by both parties.

252.216-7006 ORDERING (MAY 2011)

(IAW DFARS 216.506(a))

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the contract schedule. Such orders may be issued from the effective date of the contract to one (1) year thereafter for the Basic Year. If applicable, any options that are exercised will extend the contract ordering period by twelve (12) months..

(Applicable to solicitations and contracts when a definite-quantity contract, a requirements contract, or an indefinite-quantity contract is contemplated)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

(IAW FAR 17.208(g))

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 Days ; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years .

(Applicable when the Government gives the contractor a preliminary written notice of its intent to extend the contract, or an extension of the contract includes an extension of the…