Attachment_4_-__Targets_Requirements_Acceptability_Chklist.xlsx
XLSX spreadsheet 129 KB Posted
- Attached to
- USAF Training & Qualification Targets
- Solicitation number
- FA8054-16-R-0002
About this file
Requirements Acceptability checklist
View the file
Other files
Show all 29
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
T&QT Acceptability Checklist
| USAF Training and Qualification Targets Requirements Acceptability Checklist |
| TO ENSURE YOU SEE ENTIRE REQUIREMENT, VERIFY THE REQUIREMENT BY LOOKING AT IT IN THE FORMULA BAR JUST BELOW MICROSOFT EXCEL WINDOW ABOVE |
INSTRUCTIONS:
SECTION A: ALL OFFERORS must complete yellow highlighted cells in ROWs 5, 6, 7, and 8.
| SECTION B: ENTER A RESPONSE IN EVERY CORRESPONDING YELLOW CELL IN ROWs 12 through 47. Failure to respond to every requirement (i.e. a yellow cell is blank) will result in an UNACCEPTABLE determination. | Acceptable/Unacceptable | Rationale for Unacceptable Score | ||
| SECTION A | ||||
| Category | SECTION A | |||
| Offeror Information (OI) | ||||
| OI 1.1 | Offeror Name | |||
| OI 1.2 | Offeror Address | |||
| OI 1.3 | Point of Contact Name | |||
| OI 1.4 | POC email & phone | |||
| SECTION B | ||||
| Category | SECTION B |
Provide reference for literature submitted to substantiate proof that proposal meets requirement (specify document name and location/page number within document, as appropriate).
FAILURE TO COMPLETE EVERY YELLOW CELL WILL RESULT IN A TECHNICAL ASSESSMENT OF "UNACCEPTABLE"
Manufacturer and Product Information (MaPI) for USAF Training and Qualification Targets - CLIN # 0001-0003
| MaPI 1 | CLIN 0001 - Pistol Practice AFQC (M9) |
| MaPI 1.1 | Manufacturer Name |
| MaPI 1.2 | Product Name |
| MaPI 1.3 | Manufacturer Part Number |
| MaPI 1.4 | Offeror Part or Item Number |
| MaPI 2 | CLIN 0002 - Pistol Evaluation AFQC (M9) |
| MaPI 2.1 | Manufacturer Name |
| MaPI 2.2 | Product Name |
| MaPI 2.3 | Manufacturer Part Number |
| MaPI 2.4 | Offeror Part or Item Number |
| MaPI 3 | CLIN 0003 - Rifle/Carbine AFQC Target |
| MaPI 3.1 | Manufacturer Name |
| MaPI 3.2 | Product Name |
| MaPI 3.3 | Manufacturer Part Number |
| MaPI 3.4 | Offeror Part or Item Number |
| USAF Training and Qualification Targets | |
| T&QT 1 | The weight of the paper should be heavy, similar to construction paper (~60gsm) |
| T&QT 2 | The paper color for all targets is Olive Drab Green |
| T&QT 3 | Designed in the silhouette of the human torso form the belt line to the top of the head with the arms down by both sides of the body |
| T&QT 4 | The torso must be 19.5" wide, the head must be 8.25" wide and silhouette must be 40" tall from the base to the top of the head (The silhouette must meet the same dimensions of Military E-Silhouette NSN 6920-00-600-6874) |
| T&QT 5 | The Pistol AFQC Practice target shall have one 10" white circle on the torso and one 6" white circle on the head of the silhouette |
| T&QT 5.1 | The weight (width) of the circle lines should be between 1/16” to 1/32” |
| T&QT 5.2 | The width and brightness of the white circles must enable the shooter to clearly see the circles at a distance from 3 meters up to 25 meters |
| T&QT 5.3 | Center the 10-inch circle on the target with the top edge of the circle 13-1/4 inches from the top of the head of the target |
| T&QT 5.4 | Center the 6-inch circle in the head of the target with the top of the circle 3 inches below the top of the target |
| T&QT 6 | The Pistol AFQC Evaluation target shall have one 10" black circle on the torso and one 6" black circle on the head of the silhouette |
| T&QT 6.1 | The weight (width) of the circle lines should be between 1/16” to 1/32” |
| T&QT 6.2 | The width and brightness of the black circles must be dark enough for instructors to identify the black line while scoring, yet light enough the shooter cannot clearly see it at a distance from 3 meters |
| T&QT 6.3 | Center the 10-inch circle on the target with the top edge of the circle 13-1/4 inches from the top of the head of the target |
| T&QT 6.4 | Center the 6-inch circle in the head of the target with the top of the circle 3 inches below the top of the target |
| T&QT 7 | The Rifle/Carbine AFQC target shall have one 6" white circle on the head of the silhouette and , two side by side 10" white circles on the torso |
| T&QT 7.1 | The weight (width) of the circle lines should be between 1/16” to 1/32” |
| T&QT 7.2 | The width and brightness of the white circles must enable the shooter to clearly see the circles at a distance of 3 meters up to 25 meters |
| T&QT 7.3 | First 10" Circle – slightly higher and to the right, where the outside edge of the circle is 1.25” from right edge of the silhouette, the bottom edge of the circle is 16.25” from the bottom of the silhouette, and the number “1” should be 4" tall, in white Times New Roman font, and centered on the circle |
| T&QT 7.4 | Second 10" Circle – slightly lower and to the left, where the outside edge of the circle is 1.25” from left edge of the silhouette, the bottom edge of the circle is 9.25” from the bottom of the silhouette, and the number “2” should be 4" tall, in white Times New Roman font, and centered on the circle |
| T&QT 7.5 | Center the 6-inch circle in the head of the target with the top of the circle 3 inches below the top of the target |
| T&QT 8 | Preferred packaging is 500 targets per box |
ATTACHMENT 4
File details come from the government source that posted it. Updated .