Site visit AGENDA - 6.17.20.pdf

PDF 31 KB Posted

Attached to
Repair Various Sidewalks, Ramps, and Steps Federal contract opportunity
Solicitation number
FA665620B0002
Issued by
Department of the Air Force Reserve Command

About this file

This document contains an agenda for a site visit related to a federal contract solicitation, as well as details of the solicitation itself. The solicitation is for repair work at Youngstown Air Reserve Station, including installing handrails, constructing concrete steps and sidewalks, modifying doors for handicap accessibility, and replacing sections of damaged sidewalk. The work must be completed within 60 days of notice to proceed. The solicitation will be awarded as a firm-fixed price contract to a certified HUBZone small business. The estimated value is between $100,000 and $250,000. The response deadline is July 7, 2020. The site visit will be held on June 17, 2020 and interested parties must register on the federal contracting website.

View the file

Other files for this federal contract opportunity

Show all 16

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

AGENDA

Site Visit – 17 June 2020 @ 1000 hours

Solicitation #FA6656B0002 Repair Various Sidewalks, Ramps, and Steps

The project consists of, but is not limited to, the contractor shall furnish all supervision, labor, materials, tools, equipment, apparatus, and transportation required to install handrails on the concrete steps behind Bldg. 407. Construct concrete steps between Bldg. 126 and the water tower where the two sidewalks connect. Install handrails along the entire sidewalk and new steps between Bldg. 126 and the water tower. Replace the concrete steps at Bldg. 101 and add handrails. Replace the concrete ramp by lodging with concrete steps and appropriate handrails. Reduce the slope of the concrete sidewalks near lodging by excavating and grading, then replace the concrete sidewalks with an acceptable degree of slope. Remove and replace various sidewalks that are heaving at buildings 504, 538, 101, and near the fitness center. Modify the door at Bldg. 113 to be handicap compliant and construct a concrete handicap ramp. Requirements are further detailed in the Drawings and in the General Requirements found at Specification Section 01 01 00.

This project has one (1) line item. This is a sealed bid solicitation whereby the bid opening will take place at Youngstown Air Reserve Station in Bldg.504—Conference Room at 1000 (10 o’clock am) local time on 7 July 2020. Offers will be publicly opened at that time. Envelopes containing offers must be sealed and marked with the offeror’s name, the solicitation number, and the date and time the offers are due.

Anyone who needs base access for the bid opening must submit a completed Entry Authority List form no later than 1:00pm local time on 26 June 2020. An updated form with instructions will be posted on beta.sam.gov following this site visit. Even if you already completed one for this site visit, you will need to submit a new one.

This project is a HUBZone Set-Aside. Offers are only being solicited from certified HUBZone Small Businesses. Contract Clause 52.219-3 Deviation 2020-O0008, Notice of HUBZone Set- Aside or Sole Source Award is included in the solicitation at Section I page 13. (The full text of the clause is also attached to this agenda.)

Proposals are due on 7 July 2020 at 10:00 am, local time. Hand carried bids shall be delivered to the Contracting Office at Bldg. 504—Conference Room, no later than that time. Proposal package is to include required bonds and the Financial Institution Reference Sheet (Attachment 4 of the solicitation).

Contractors are reminded that in order to receive an award as a prime contractor, they must be registered and listed in the System for Award Management (SAM) database at website, www.sam.gov, as well as have completed the annual representations and certifications. NAICS code 236220 must be registered in SAM at the time of bid opening.

The proposal is to be based on the specifications/drawings. Contractors are urged to closely review the drawing notes. No changes are to be made unless received in writing from the Contracting Officer in the form of an amendment. It is the contractors’ responsibility to check the beta.sam.gov website for updates and amendments.

http://www.sam.gov/

Contractors are to direct all questions to the Contracting Office in writing. Questions can be e-mailed to the attention of Jasmine Corpa – jasmine.corpa@us.af.mil AND Phyllis Delgros – phyllis.delgros@us.af.mil. Emails are preferred. It is imperative all communications are identified with the full solicitation number, not project number, in the subject line. Any/all questions received, along with the response, will be posted to the beta.sam.gov website. It is important to have your questions to us by 22 June 2020 no later than 2:00 pm Eastern to allow time to answer and post no later than 26 June 2020. If questions are not received by the deadline, they will not be answered.

Contractors are reminded that the Buy American Act pertains per the terms of the contract. The contractor shall use only domestic construction material in performing this contract. (Reference, Section I – Contract Clause 52.225-9). Consideration should also be given to biobased products.

This clause can be found in Section K.

mailto:jasmine.corpa@us.af.mil

NOTICE OF HUBZONE SET-ASIDE OR SOLE SOURCE AWARD (MAR 2020)

(DEVIATION 2020-O0008)

(a) Definitions. As used in this clause—

“HUBZone small business concern” means a small business concern, certified by the Small Business Administration (SBA), that appears on the List of Qualified HUBZone Small Business Concerns maintained by the SBA (13 CFR 126.103).

“Similarly situated entity” means a first-tier subcontractor, including an independent contractor, that—

(1) Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its socioeconomic status); and

(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.

(b) Applicability. This clause applies only to—

(1) Contracts that have been set aside or awarded on a sole source basis to HUBZone small business concerns;

(2) Part or parts of a multiple-award contract that have been set aside for HUBZone small business concerns;

(3) Orders set aside for HUBZone small business concerns under multiple-award contracts as described in 8.405-5 and 16.505(b)(2)(i)(F); and

(4) Orders issued directly to HUBZone small business concerns under multiple-award contracts as described in 19.504(c)(1)(ii).

(c) General.

(1) Offers are solicited only from HUBZone small business concerns. Offers received from concerns that are not HUBZone small business concerns will not be considered.

(2) Any award resulting from this solicitation will be made to a HUBZone small business concern.

(d) Independent contractors. An independent contractor shall be considered a subcontractor.

(e) Limitations on subcontracting. By submission of an offer and execution of a contract, a HUBZone small business concern agrees that, in the case of a contract assigned a NAICS code for—

(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the prime contractor’s 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract. Other direct costs are excluded to the extent they are not the principal purpose of the contract and cannot be obtained from small business concerns;

(2) Supplies (other than acquisition from a nonmanufacturer of the supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the prime contractor’s 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;

(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the prime contractor’s 85 percent subcontract amount that cannot be exceeded; or

(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the prime contractor’s 75 percent subcontract amount that cannot be exceeded.

(f) A HUBZone small business contractor shall comply with the limitations on subcontracting as follows:

(1) For contracts, in accordance with paragraphs (b)(1) or (2) of this clause—

[Contracting Officer check as appropriate.]

__ By the end of the base term of the contract and then by the end of each subsequent option period; or

__ By the end of the performance period for each order issued under the contract.

(2) For orders, in accordance with paragraph (b)(3) or (4) of this clause, by the end of the performance period for the order.

(g) Joint venture. A HUBZone joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause shall be performed by the aggregate of the HUBZone small business participants.

(h) Nonmanufacturer.

(1) Unless SBA has waived the requirements of paragraphs (g)(1)(i) through (iii) of this clause in accordance with 13 CFR 121.1204, a HUBZone small business concern that provides an end item it did not manufacture, process, or produce, shall—

(i) Provide an end item that a small business has manufactured, processed, or produced in the United States or its outlying areas;

(ii) Be primarily engaged in the retail or wholesale trade and normally sell the type of item being supplied; and

(iii) Take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice; for example, providing storage, transportation, or delivery.

(2) For contracts or orders for multiple end items, at least 50 percent of the total value of the contract or order shall be manufactured, processed, or produced in the United States or its outlying areas by small business concerns.

(3) Paragraphs (h)(1) through (2) of this clause do not apply to construction or service contracts.

(i) Notice. The HUBZone small business offeror acknowledges that a prospective HUBZone awardee must be a HUBZone small business concern at the time of award of this contract. The HUBZone offeror shall provide the Contracting Officer a copy of the notice required by 13 CFR

126.501 if material changes occur before contract award that could affect its HUBZone eligibility. If the apparently successful HUBZone offeror is not a HUBZone small business concern at the time of award of this contract, the Contracting Officer will proceed to award to the next otherwise successful HUBZone small business concern or other offeror.

(End of clause)

File details come from the government source that posted it. Updated .