Amendment_1_FA561319QA026_Mobile_Camera_System.pdf

Combined Synopsis/Solicitation

Requirement Title: Mobile Camera System

Solicitation Number: FA561319QA026

Solicitation Issue Date: Thursday, 08 August 2019

Response Deadline: Friday, 09 September 2019 no later than 10:00 am Eastern

Purchasing Office: 700th Contracting Squadron Kapaun Air Station 67661 Kaiserslautern Germany

Point(s) of Contact: Venice Pamparo, Contract Specialist, venice.pamparo.1@us.af.mil , Comm +49 631-536-6870

Evan Porter, Contracting Officer, evan.porter.1@us.af.mil, Comm +49 631-536-0119

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

2. This solicitation is being issued as a(n) Request For Quotation (RFQ).

3. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisiton Circular 2019-01.

4. In accordance with Federal Acquisition Regulation FAR 19.000(b) and because this requirement is to be performed outside the United States and its outlying areas, set-asides do not apply to this requirement.

5. The North American Industry Size Classification System (NAICS) code associated with this requirement is 334310

Description:

The contractor shall provide a Mobile Surveillance Camera System with all necessary accessories/equipments in accordance with the Salient Characteristics and to install and maintain the system in accordance with the Statement of Work.

Place of Delivery/Performance/Acceptance/FOB Point:

F.O.B. Destination; Ramstein Air Base, Germany

Line Item

Description Quantity Unit of Issue

Unit Price Total Amount

0001 Mobile Camera System with rapid deployment CCTV towers, storage card capability, battery and fuel cells, recording capability, installation and 24-month maintenance included and delivery or shipping to Ramstein AB, Germany

(See Attachment 1 –SOW and Attachment 2 – Mobile Camera System Requirements or Specifications)

6 Each

FAR provision 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition. As prescribed in FAR 12.301(b)(1), the following addendum is provided for this solicitation and hereby amends any language therein:

1. Quotes in response to this solicitation must be submitted no later than 10AM Eastern time on Monday, 09 September 2019.

Quotes must be submitted via email to (Contract Specialist/Contracting Officer Email).

2. The offeror shall propose a firm fixed-price, FOB Destination for CLIN 0001 in the table on this page. Pricing shall be in U.S.

General Information

Requirement Information

Instructions to Offerors mailto:venice.pamparo.1@us.af.mil mailto:evan.porter.1@us.af.mil

Currency ($) or Euro (€). Offers submitted in Euro will be converted to U.S. Dollar using the exchange rate of 0.8582 Euro per U.S. Dollar for evaluation purposes. Quote must address any discount payment terms that will be offered. Offerors shall use the Pricing Schedule on page 1 of this solicitation, which includes all contract line item numbers, quantities, and units of issue to fill in all unit prices and total amount blocks.

3. Signed Amendments. In addition, offers must include signed copies of any amendments issues against the solicitation.

4. System for Award Management Registration. Offeror is required to have an active/current registraton in the System for Award Management (SAM) to be eligible for award in accordnace with FAR 52.204-7(b). Information about these services can be found using the resources below:

DUNS number information http://fedgov.dnb.com/webform

SAM registration and information on obtaining a CAGE code https://www.sam.gov/portal/public/SAM

Non- U.S. companies: CAGE code information http://www.dlis.dla.mil/nato_poc.asp

5. In accordance with DFAR 252.225-7041, the contractor shall ensure that all contract correspondence that is addressed to the United States Government is submitted in English or with an English translation. Offers not in English language will not be considered for award.

6. Offerors must be able to provide all items, partial quotes will not be accepted. Offerors are asked to specify the warranty period of the items offered.

7. Quotes are required to be valid until 30 September 2019

8. All questions are to be submitted in writing by 03 September 2019, 10:00 am Eastern

9. Offeror shall complete all applicable information found below:

OFFEROR INFORMATION

Offeror Name:

Offeror Address:

Offeror Point of Contact Name/Phone/Email:

Quote #:

DUNS #:

CAGE Code:

Taxpayer ID #:

FOB: DESTINATION

Shipping Weight:

Shipping Dimensions:

Delivery Days ARO:

Payment Terms:

Discount Terms:

Quote Expiration Date:

http://fedgov.dnb.com/webform https://www.sam.gov/portal/public/SAM http://www.dlis.dla.mil/nato_poc.asp

FAR Provision 52.212-2, Evaluation -- Commercial Items, applies to this acquisition. As prescribed in FAR 12.301(c), the following addendum is provided for this solicitation and hereby amends any language therein:

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

PRICE.

TECHNICAL ACCEPTABILITY – according to attached Salient Characteristics/Specifications and Statement of Work.

The Government will evaluate quotes as follows:

The lowest priced quote will be evaluated first for technical acceptability. If deemed acceptable, further evaluation of quotes will stop and award will be made to this contractor. If deemed unacceptable, the next lowest quote will be evaluated for technical acceptability and so on. This will continue until an acceptable quote is determined.

FAR 52.211-6, Brand Name or Equal (Aug 1999) -- (a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must—

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by—

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modification the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification.

(c)The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

FAR provision 52.212-3, Offeror Representations and Certifications -- Commercial Items with alternate I applies to this acquisition; the offeror verifies by submission of their offer that the representation and certifications currently posted electronically at FAR 52.212-3, offeror Representations and Certifications -- Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation. Alternatively, if the Offeror has not com

FAR clause 52.212-4, Contract Terms and Conditions -- Commercial Items applies to this acquisition.

FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders -- Commercial Items applies to this acquisition; the following checked clauses are hereby included by reference:

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

X (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31

Evaluation Criteria

Clauses and Provisions

U.S.C. 6101 note).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

X (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).

X (26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

X (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

X (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

X (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

X (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (July 2013) (31 U.S.C. 3332).

Clauses Incorporated by Full Text

AFFARS MP5332.7 Contract Funding

Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.

52.252-1 Solicitation Provisions Incorporated By Reference

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this address:

http://farsite.hillaf.mil/vffar1.htm

52.252-2 Clauses Incorporated by Reference

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address(es):

http://farsite.hillaf.mil/vffar1.htm

252.211-7003 Item Unique Identification and Valuation

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD.

All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description None

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

None

(If items are identified in the Schedule, insert ``See Schedule'' in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003.

If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

252.225-7043 ANTITERRORISM/FORCE PROTECTION POLICY FOR DEFENSE CONTRACTORS OUTSIDE THE UNITED

STATES (JUN 2015)

(a) Definition. United States, as used in this clause, means, the 50 States, the District of Columbia, and outlying areas.

(b) Except as provided in paragraph (c) of this clause, the Contractor and its subcontractors, if performing or traveling outside the United States under this contract, shall--

(1) Affiliate with the Overseas Security Advisory Council, if the Contractor or subcontractor is a U.S. entity;

(2) Ensure that Contractor and subcontractor personnel who are U.S. nationals and are in-country on a non-transitory basis, register with the U.S. Embassy, and that Contractor and subcontractor personnel who are third country nationals comply with any security related requirements of the Embassy of their nationality;

(3) Provide, to Contractor and subcontractor personnel, antiterrorism/force protection awareness information commensurate with that which the Department of Defense (DoD) provides to its military and civilian personnel and their families, to the extent such information can be made available prior to travel outside the United States; and

(4) Obtain and comply with the most current antiterrorism/force protection guidance for Contractor and subcontractor personnel.

(c) The requirements of this clause do not apply to any subcontractor that is--

(1) A foreign government;

(2) A representative of a foreign government; or

(3) A foreign corporation wholly owned by a foreign government.

(d) Information and guidance pertaining to DoD antiterrorism/force protection can be obtained from [ ___ Contracting Officer to insert applicable information cited in PGI 225.372-1].

252.229-7001 TAX RELIEF (SEPT 2014)

(a) Prices set forth in this contract are exclusive of all taxes and duties from which the United States Government is exempt by virtue of tax agreements between the United States Government and the Contractor's government. The following taxes or duties have been excluded from the contract price:

NAME OF TAX: VAT

RATE (PERCENTAGE): 19%

(b) The Contractor's invoice shall list separately the gross price, amount of tax deducted, and net price charged.

(c) When items manufactured to United States Government specifications are being acquired, the Contractor shall identify the materials or components intended to be imported in order to ensure that relief from import duties is obtained. If the Contractor intends to use imported products from inventories on hand, the price of which includes a factor for import duties, the Contractor shall ensure the United States Government's exemption from these taxes. The Contractor may obtain a refund of the import duties from its government or request the duty-free import of an amount of supplies or components corresponding to that used from inventory for this contract.

(End of clause)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

INVOICE AND RECEIVING REPORT (COMBO)

(Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

DODAAC F3N049

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC F87700 Issue By DoDAAC FA5613 Admin DoDAAC FA5613 Inspect By DoDAAC F3N049 Ship To Code F3N049 Service Approver (DoDAAC) F3N049 Service Acceptor (DoDAAC) F3N049

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

Important:

Foreign vendors shall ensure that their banking information is included in the Comments tab:

COMMENTS

SEPA Banking Information (Foreign Vendors Only):

- Name of Bank

- IBAN – BIC

- Account Number (if applicable)

VAT FORMS (Abwicklungsscheine) shall be mailed to:

DFAS Europe Customer Service +49-631-411-6523 dfas-europe-vendorpay@mail.mil Website: https://www.dfas.mil/contractorsvendors.html

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

Corinna.jackson.de@us.af.mil venice.pamparo.1@us.af.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

2) For technical WAWF help, contact the WAWF helpdesk at 001-866-618-5988.

For PAYMENT ISSUES contact dfas.limestone-me.jaq.mbx.dfas-li-customer-inquiries@mail.mil, or contact the DFAS Technician as shown on the Invoice/RR.

3) PARTIAL PAYMENT AUTHORIZED

However, payment will not be made more frequently than once per month.

Please submit your invoice via WAWF not later than 1 week upon completion of each reapir/service/delivery.

The final invoice submitted under this contract must be clearly marked as final invoice.

mailto:Corinna.jackson.de@us.af.mil mailto:venice.pamparo.1@us.af.mil mailto:dfas.limestone-me.jaq.mbx.dfas-li-customer-inquiries@mail.mil

5352.201-9101 OMBUDSMAN (AUG 2017)

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman:

Primary:

Mr. Erik J. Symanski

AFICA/KU, UNIT 3103, APO, AE 09094-3103

AFICA/KU, Geb 404, Flugplatz Ramstein, 66877 Ramstein-Miesenbach, Germany E-mail: erik.symanski@us.af.mil Tel: 0049-6371-47-2209 DSN: (314)480-2209 Fax: (49)-6371-47-2025

Alternate:

Ms. Heidi Hoehn

AFICA/KU, UNIT 3103, APO, AE 09094-3103

AFICA/KU, Geb 404, Flugplatz Ramstein, 66877 Ramstein-Miesenbach, Germany E-mail: heidi.hoehn.de@us.af.mil Tel: DSN: (314)480-9330 Fax: (49)-6371-47-2025

Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/HQ AFICA/AFISRA/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer.

(End of clause)

5352.223-9001 Health and Safety on Government Installations

HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS (NOV 2012)

(a) In performing work under this contract on a Government installation, the contractor shall:

(1) Take all reasonable steps and precautions to prevent accidents and preserve the health and safety of contractor and Government personnel performing or in any way coming in contact with the performance of this contract; and

(2) Take such additional immediate precautions as the contracting officer may reasonably require for health and safety purposes.

(b) The contracting officer may, by written order, direct Air Force Occupational Safety and Health (AFOSH) Standards and/or health/safety standards as may be required in the performance of this contract and any adjustments resulting from such direction will be in accordance with the Changes clause of this contract.

(c) Any violation of these health and safety rules and requirements, unless promptly corrected as directed by the contracting officer, shall be grounds for termination of this contract in accordance with the Default clause of this contract.

5352.242-9000 Contractor Access to Air Force Installations.

CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (NOV 2012)

(a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver’s license, current vehicle registration, valid vehicle insurance certificate to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with [insert any additional requirements to comply with AFI 31-101, Integrated Defense, and AFI 31-501, Personnel Security Program Management] citing the appropriate paragraphs as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Failure to comply with these requirements may result in withholding of final payment.

(End of clause)

The provisions and clauses listed below have been determined by the contracting officer to be necessary for this acquisition and consistent with customary commercial practices. The following provisions and clauses are hereby included by reference:

52.202-1, Definitions 52.203-3, Gratuities 52.203-6, Restrictions on Subcontractor Sales To The Government 52.204-10, Reporting Executing Compensation and First-tier Subcontract Awards 52.204-13, System for Award Management Maintenance 52.204-16, Commercial and Government Entity Code Reporting 52.204-18, Commercial and Government Entity Code Maintenance 52.212-3, Offeror Representations and Certifications –Commercial Items 52.212-4, Contract Terms and Conditions--Commercial Items 52.225-13, Restrictions on Certain Foreign Purchases 52.225-14, Inconsistency Between English Version and Translation of Contract 52.229-6, Taxes – Foreign Fixed-Price Contracts 52.232-1, Payments 52.232-18, Availability of Funds 52.232-33, Payment by Electronic Funds Transfer--System for Award Management 52.232-39, Unenforceability of Unauthorized Obligations 52.232-40, Providing Accelerated Payments to Small Business Subcontractors 52.233-1, Disputes 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.242-13, Bankruptcy 52.247-34, F.O.B. Destination 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7002, Requirements to Inform Employees of Whistleblower Rights 252.203-7005, Representations Relating to Compensation of Former DoD Officials 252.204-7003, Control of Government Personnel Work Product 252.204-7006, Billing Instructions 252.204-7012, Safeguarding Covered Defense Information for Lititgation Support 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support 252.209-7004, Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism 252.211-7008, Use of Government-Assigned Serial Numbers

252.213-7000, Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations 252.222-7002, Compliance with Labor Laws (Overseas 252.223-7006, Prohibition On Storage, Treatment, and Disposal of Toxic or Hazardous Materials 252.2237008, Prohibition of Hexavalent Chromium 252.225-7036, Buy American – Free Trade Agreements – Balance of Payments Program, ALT 1 252.225-7041, Correspondence in English 252.225-7043, Antiterrorism/Force Protection for Defense 252.225-7048, Export-Controlled Items 252.229-7000, Invoices Exclusive of Taxes or Duties 252.229-7002, Customs Exemptions (Germany) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7008, Assignment of Claims (Overseas) 252.232-7010, Levies on Contract Payments 252.233-7001, Choice of Law (Overseas) 252.233-7007, Cancellation Or Termination of Orders 252.243-7001, Pricing of Contract Modifications 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items

Attachment 1 – Statement of Work

Attachment 2 – Salient Characteristics/Specifications

Attachments