MHP2_09262012.pdf
PDF 155 KB Posted
- Attached to
- Parts Washers and Environmental Waste Collection Services Federal contract opportunity
- Solicitation number
- FA462018QA030
About this file
MSDS
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| sf30_Leased_Parts_Washers.pdf | ||
| sf30_Extend_RFQ_Deadline.pdf | ||
| Breakthrough_SDS.pdf | ||
| Amendment_0002.pdf | ||
| SF_30.pdf | ||
| Attachment_1,_Pricing_Schedule.xlsx | XLSX spreadsheet | |
| Attachment_2,_Environmental_Waste_PWS.pdf | ||
| Attachment_3,_WD_96-0223_Rev.-43_10_July_2018.pdf | ||
| FA462018QA030.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Revision 09/12; MSDS Form No. 82846 - Page 1 of 9
ARMAKLEEN™ M-HP-2
MATERIAL SAFETY DATA SHEET FOR USA AND CANADA
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: ARMAKLEEN M-HP-2
SYNONYM(S): Not available.
PRODUCT PART
NUMBERS: 6313, 6335
PRODUCT USE: Aqueous, alkaline, concentrated cleaner that is diluted with water for cleaning a variety of materials in high pressure spray machines. If this product is used in combination with other products, refer to the Material Safety Data Sheets for those products.
24-HOUR EMERGENCY PHONE NUMBERS
These numbers are for MEDICAL: TRANSPORTATION (SPILL):
emergency use only. If you desire non-emergency 1-800-468-1760 product information, please call a phone number listed below.
MANUFACTURER: SUPPLIER:
The ArmaKleen Company Safety-Kleen Systems, Inc.
469 North Harrison Street 2600 North Central Expressway, Suite 400 Princeton, NJ 08543 Richardson, TX 75080
USA USA
(609) 683-5900 (800) 669-5740
TECHNICAL INFORMATION: 1-800-332-5424
SAFETY-KLEEN MSDS FORM NUMBER: 82846
THEARMAKLEEN COMPANY MSDS NUMBER: 935A
ISSUE: September 26, 2012
ORIGINAL ISSUE: December 1996 SUPERSEDES: March 2, 2011
PREPARED BY: ArmaKleen MSDS Coordinator APPROVED BY: The ArmaKleen
Company
ARMAKLEEN M-HP-2
Revision 09/12 MSDS Form No. 82846 - Page 2 of 10
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
OSHA PEL ACGIH TLV®
WT% NAME SYNONYM CAS NO. TWA STEL TWA STEL LDa LC b
7 to 13 Potassium Carbonate Potash 584-08-7 15mg/m3 N. Av. 10mg/m 3,c
N. Av. 1870 >4.96mg/ L
1 to 5 Sodium xylene sulfonate
SXS 1300-72-7 N. Av. N. Av. N. Av. N. Av. 7200 N. Av.
1 to 5 Silicic Acid, potassium salt
Potassium Silicate
1312-76-1 N. Av. N. Av. N. Av. N. Av. 1300 N. Av.
1 to 5 3,5,5-trimethylhexanoic acid
Isononanoic acid
3302-10-1 N. Av. N. Av. N. Av. N. Av. 1100 N. Av.
1 to 5 Potassium hydroxide Caustic potash 1310-58-3 N. Av. N. Av. 2mg/m3 (ceiling)
N. Av. 214 N. Av.
1 to 5 Alcohol C6-C10, ethoxylated
Linear alcohol alkoxylate
68987-81-
N. Av. N. Av. N. Av. N. Av. N. Av. N. Av.
0.5 to 1 Sodium hydroxide Caustic soda 1310-73-2 2mg/m3 N. Av. 2mg/m3 (ceiling)
N. Av. N. Av. N. Av.
1 to 5 Oxirane, methyl-, polymer
Polyoxyethylen e-polyoxypropyle ne glycol
9003-11-6 N. Av. N. Av. N. Av. N. Av. 5700 N. Av.
N.Av. = Not Available aOral-Rat LD50 (mg/kg) bInhalation LC50 cParticulates not otherwise classified
SECTION 3: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
APPEARANCE
Liquid, clear, yellow, and mild detergent odor.
WARNING!
HEALTH HAZARDS
May irritate the respiratory tract (nose, throat, and lungs), eyes, and skin.
POTENTIAL HEALTH EFFECTS
INHALATION High concentrations of vapor or mist may irritate the respiratory tract (BREATHING): (nose, throat, and lungs).
EYES: May cause moderate to severe irritation.
SKIN: May cause moderate irritation. Latent effects are possible. Not likely to be absorbed through the skin in harmful amounts
INGESTION
(SWALLOWING): May cause digestive tract irritation.
Revision 09/12 MSDS Form No. 82846 - Page 3 of 10
MEDICAL CONDITIONS Individuals with pre-existing respiratory tract (nose, throat, and AGGRAVATED BY lungs), eye, and/or skin disorders may have increased susceptibility EXPOSURE: to the effects of exposure.
CHRONIC: Prolonged or repeated skin contact may cause drying, cracking, redness, itching, and/or swelling (dermatitis).
CANCER No known carcinogenicity. For more information, see SECTION 11:
INFORMATION: CARCINOGENICITY.
POTENTIAL ENVIRONMENTAL EFFECTS
Not available. Also see SECTION 12: ECOLOGICAL INFORMATION.
SECTION 4: FIRST AID MEASURES
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing (BREATHING) is difficult, give oxygen. Oxygen should only be administered by qualified personnel. Someone should stay with victim. Get medical attention if breathing difficulty persists.
EYES: If irritation or redness from exposure to vapor develops, move away from exposure into fresh air and flush with water for 5 minutes. Upon direct contact with liquid, immediately flush eyes with plenty of lukewarm water, holding eyelids apart, for 15 minutes. Get medical attention.
SKIN: Remove affected clothing and shoes. Wash skin thoroughly with soap and water. Get medical attention if irritation or pain develops or persists.
INGESTION: Do NOT induce vomiting. Immediately get medical attention. Call medical (SWALLOWING) emergency telephone number (1-800-468-1760) for additional information.
If spontaneous vomiting occurs, keep head below hips to avoid breathing the product into the lungs. Never give anything to an unconscious person by mouth.
NOTE TO Treat symptomatically and supportively. Ingesting large amounts may PHYSICIANS: cause systemic alkalosis. Treatment may vary with condition of victim and specifics of incident. Call 1-800-468-1760.
SECTION 5: FIRE FIGHTING MEASURES
FLASH POINT: greater than 212ºF (100ºC)
FLAMMABLE LIMITS IN AIR: Not applicable.
AUTOIGNITION
TEMPERATURE: Not applicable.
Revision 09/12 MSDS Form No. 82846 - Page 4 of 10
HAZARDOUS COMBUSTION Product itself does not burn, but may decompose upon PRODUCTS: heating to produce carbon monoxide, carbon dioxide, sulfur oxides.
CONDITIONS OF
FLAMMABILITY: Product will not burn.
EXTINGUISHING MEDIA: Not applicable.
NFPA 704
HAZARD This information is intended solely for the use by individuals IDENTIFICATION: trained in this system.
FIRE FIGHTING Keep storage containers cool with water spray.
INSTRUCTIONS: A positive-pressure, self-contained breathing apparatus
(SCBA) and full-body protective equipment are required for fire emergencies.
FIRE AND Heated containers may rupture. “Empty” containers may EXPLOSION HAZARDS: retain residue and can be dangerous. Not sensitive to mechanical impact or static discharge.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Spilled product is slippery. Do not touch or walk through spilled product. Stop leak if you can do it without risk. Wear protective equipment and provide engineering controls as specified in SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION. Isolate hazard area.
Keep unnecessary and unprotected personnel from entering. Ventilate area and avoid breathing vapor or mist. Contain away from surface waters and sewers. Contain spill as a liquid for possible recovery or sorb with compatible sorbent material and shovel with a clean tool into a sealable container for disposal.
Additionally, for large spills: Dike far ahead of liquid spill for collection and later disposal.
Revision 09/12 MSDS Form No. 82846 - Page 5 of 10
There may be additional regulatory reporting requirements associated with spills, leaks, or releases of this product. Also see SECTION 15: REGULATORY INFORMATION.
SECTION 7: HANDLING AND STORAGE
HANDLING: Use clean tools. Do not breathe vapor or mist. Use in a well ventilated area.
Avoid contact with eyes, skin, clothing, and shoes.
SHIPPING AND Keep container tightly closed when not in use and during transport.
STORING: Store containers in a cool, dry place. Empty product containers may retain product residue and can be dangerous. See SECTION 14: TRANSPORT INFORMATION for Packing Group information.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING Provide general ventilation needed to maintain concentration of CONTROLS: vapor or mist below applicable exposure limits. Where adequate general ventilation is unavailable, use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY Use NIOSH-certified, combination N-, P-, or R- series particulate filter PROTECTION: respiratory protective equipment when concentration of vapor or mist exceeds applicable exposure limits. Selection and use of respiratory protective equipment should be in accordance in the USA with OSHA General Industry Standard 29 CFR 1910.134; or in Canada with CSA Standard Z94.4.
EYE Where eye contact is likely, wear chemical goggles; contact lens PROTECTION: use is not recommended.
SKIN Where skin contact is likely, wear nitrile, neoprene, or equivalent PROTECTION: protective gloves; use of polyvinyl alcohol (PVA), natural rubber, or equivalent gloves is not recommended.
To avoid skin contact where spills and splashes are likely, wear appropriate chemical-resistant faceshield, boots, apron, whole body suits, or other protective clothing.
PERSONAL Use good personal hygiene. Wash thoroughly with soap and water after HYGIENE: handling and before eating, drinking, or using tobacco products. Clean affected clothing, shoes, and protective equipment before reuse. Discard affected clothing, shoes, or protective equipment if they cannot be thoroughly cleaned. Discard leather articles, such as shoes, saturated with the product.
Revision 09/12 MSDS Form No. 82846 - Page 6 of 10
OTHER Where spills and splashes are likely, facilities storing or using this product PROTECTIVE should be equipped with an emergency eyewash and shower, both equipped EQUIPMENT: with clean water, in the immediate work area.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE,
APPEARANCE, AND ODOR: Liquid, clear, yellow, and mild detergent odor.
ODOR THRESHOLD: Not available.
MOLECULAR WEIGHT: Not applicable.
SPECIFIC GRAVITY: 1.10 (water = 1)
DENSITY: 9.2 LB/US gal (1100 g/L) VAPOR DENSITY: less than 1 (air = 1)
VAPOR PRESSURE: 17.5 mm Hg at 68°F (20°C) (approximately)
BOILING POINT: 212°F (100°C)
FREEZING/MELTING POINT: 32°F (0°C)
pH: 11.8
EVAPORATION RATE: Less than 1 (butyl acetate = 1)
SOLUBILITY IN WATER: Complete.
FLASH POINT: greater than 212ºF (100ºC)
FLAMMABLE LIMITS IN AIR: Not applicable.
AUTOIGNITION TEMPERATURE: Not applicable.
SECTION 10: STABILITY AND REACTIVITY
STABILITY: Stable under normal temperatures and pressures.
INCOMPATIBILITY: Avoid acids, oxidizing agents, or reducing agents.
Revision 09/12 MSDS Form No. 82846 - Page 7 of 10
REACTIVITY: Polymerization is not known to occur under normal temperatures and pressures. Not reactive with water.
HAZARDOUS
DECOMPOSITION None under normal temperatures and pressures. See also SECTION 5:
PRODUCTS: HAZARDOUS COMBUSTION PRODUCTS.
SECTION 11: TOXICOLOGICAL INFORMATION
SENSITIZATION: Based on best current information, there is no known human sensitization associated with this product.
MUTAGENICITY: Based on best current information, there is no known mutagenicity associated with this product.
CARCINOGENICITY: Based on best current information, there is no known carcinogenicity as regulated by OSHA; as categorized by ACGIH A1 or A2 substances; as categorized by IARC Group 1, Group 2A, or Group 2B agents; or as listed by NTP as either known carcinogens or substances for which there is limited evidence of carcinogenicity in humans or sufficient evidence of carcinogenicity in experimental animals.
REPRODUCTIVE Based on best current information, there is no known reproductive TOXICITY: toxicity associated with this product.
TERATOGENICITY: Based on best current information, there is no known teratogenicity associated with this product.
TOXICOLOGICALLY Based on best current information, there are no known SYNERGISTIC toxicologically synergistic products associated with this PRODUCT(S): product.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICITY: Not available.
OCTANOL/WATER
PARTITION COEFFICIENT: Not available.
SECTION 13: DISPOSAL CONSIDERATIONS
DISPOSAL: Dispose in accordance with federal, state, provincial, and local regulations. Regulations may also apply to empty containers. The
Revision 09/12 MSDS Form No. 82846 - Page 8 of 10 responsibility for proper waste disposal lies with the owner of the waste. Contact Safety-Kleen regarding recycling or proper disposal.
USEPA WASTE This product, if discarded, is not expected to be a characteristic or CODE(S): listed hazardous waste. Processing, use, or contamination by the user may change the waste code(s) applicable to the disposal of this product.
SECTION 14: TRANSPORT INFORMATION
DOT: Not regulated.
TDG: Not classified.
EMERGENCY RESPONSE Not applicable.
GUIDE NUMBER: Reference North American Emergency Response Guidebook
SECTION 15: REGULATORY INFORMATION
USA REGULATIONS
VOLATILE ORGANIC COMPOUNDS (AS REGULATED)
0 WT%; 0 LB/US gallon; 0 g/L; As per 40 CFR Part 51.100(s) Product Vapor Pressure @ 20°C = 17.5 mmHg Product does not contain photochemicaly reactive solvents
SARA SECTIONS This product does not contain any “extremely hazardous substances” 302 AND 304: listed pursuant to Title III of the Superfund Amendments and
Reauthorization Act of 1986 (SARA) Section 302 or Section 304 as identified in 40 CFR Part 355, Appendix A and B.
SARA SECTIONS This product poses the following health hazards as defined in 311 AND 312: 40 CFR Part 370 and is subject to the requirements of sections 311 and
312 of Title III of the Superfund Amendments and Reauthorization Act of
1986 (SARA):
Immediate (Acute) Health Hazard
SARA SECTION This product does not contain toxic chemicals subject to the 313: requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
CERCLA: This product contains the following “hazardous substance” listed under the Comprehensive Environmental Response, compensation and Liability Act of 1980 (CERCLA) in 40 CFR Part 302, Table 302.4 with the following reportable quantity (RQ):
Revision 09/12 MSDS Form No. 82846 - Page 9 of 10
Material CAS RQ Potassium Hydroxide 1310-58-3 1000 LB (454 kg)
Sodium hydroxide 1310-73-2 1000 LB (454 kg)
TSCA: All the components of this product are listed on, or are automatically included as “naturally occurring chemical substances” on, or exempted from the requirement to be listed on, the TSCA Inventory.
CALIFORNIA: This product does not contain detectable amounts of any chemical known to the State of California to cause cancer.
This product does not contain detectable amounts of any chemical known to the State of California to cause birth defects or other reproductive harm.
CANADIAN REGULATIONS
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR.
WHMIS: E
CANADIAN
ENVIRONMENTAL
PROTECTION ACT All the components of this product are listed on, or are automatically (CEPA): included as “substances occurring in nature” on, or are exempted from the requirement to be listed on, the Canadian Domestic Substances List
(DSL).
SECTION 16: OTHER INFORMATION
REVISION INFORMATION: Update supplier address in Section 1.
LABEL/OTHER INFORMATION: Not available.
User assumes all risks incident to the use of this product. To the best of our knowledge, the information contained herein is accurate.
However, The ArmaKleen Company assumes no liability whatsoever for the accuracy or completeness of the information contained herein. No representations or warranties, either express or implied, or merchantability, fitness for a particular purpose or of any other nature are made hereunder with respect to information or the product to which information refers
. The data contained on this sheet apply to the product as supplied to the user.
| SECTION 1: PRODUCT AND COMPANY IDENTIFICATION |
| PRODUCT NAME: ARMAKLEEN M-HP-2 |
| PRODUCT PART |
| NUMBERS: 6313, 6335 |
| TECHNICAL INFORMATION: 1-800-332-5424 |
| SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS |
| SECTION 3: HAZARDS IDENTIFICATION |
| EMERGENCY OVERVIEW |
| APPEARANCE |
| Liquid, clear, yellow, and mild detergent odor. |
| WARNING! |
| HEALTH HAZARDS |
| POTENTIAL HEALTH EFFECTS |
| POTENTIAL ENVIRONMENTAL EFFECTS |
| Not available. Also see SECTION 12: ECOLOGICAL INFORMATION. |
| SECTION 4: FIRST AID MEASURES |
| SECTION 5: FIRE FIGHTING MEASURES |
| FLASH POINT: greater than 212ºF (100ºC) |
| AUTOIGNITION |
| TEMPERATURE: Not applicable. |
| NFPA 704 |
| SECTION 6: ACCIDENTAL RELEASE MEASURES |
| Additionally, for large spills: Dike far ahead of liquid spill for collection and later disposal. |
| There may be additional regulatory reporting requirements associated with spills, leaks, or releases of this product. Also see SECTION 15: REGULATORY INFORMATION. |
| SECTION 7: HANDLING AND STORAGE |
| SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION |
| PERSONAL PROTECTIVE EQUIPMENT |
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES |
| SECTION 10: STABILITY AND REACTIVITY |
| STABILITY: Stable under normal temperatures and pressures. |
| HAZARDOUS |
| SECTION 11: TOXICOLOGICAL INFORMATION |
| SECTION 12: ECOLOGICAL INFORMATION |
| ECOTOXICITY: Not available. |
| OCTANOL/WATER |
| PARTITION COEFFICIENT: Not available. |
| SECTION 13: DISPOSAL CONSIDERATIONS |
| SECTION 14: TRANSPORT INFORMATION |
| DOT: Not regulated. |
| SECTION 15: REGULATORY INFORMATION |
| USA REGULATIONS |
| Immediate (Acute) Health Hazard |
| CANADIAN REGULATIONS |
| WHMIS: E |
| ENVIRONMENTAL |
| SECTION 16: OTHER INFORMATION |
| REVISION INFORMATION: Update supplier address in Section 1. |
File details come from the government source that posted it.