Attachment_2_-_Full_List_of_clauses_Chapel_Services.pdf

Document Number: FA461319Q1036

PROVISIONS/CLAUSES INCORPORATED BY REFERENCE

CLAUSE NO. CLAUSE TITLE YEAR-MO SECTION

VARIATION

NAME DATE

252.201-7000 Contracting Officer's Representative 1991-12 SEC G 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 2011-09 SEC I 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2013-09 SEC I 252.203-7005 Representation Relating to Compensation of Former DoD Officials. As prescribed in 203.171-4(b), insert the following provision:

2011-11 SEC K

252.204-7003 Control of Government Personnel Work Product. 1992-04 SEC I 252.204-7004 Antiterrorism Awareness Training for Contractors. 2019-02 SEC I 252.204-7006 Billing Instructions. 2005-10 SEC G 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. 2016-10 SEC I 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident

Reporting.

2016-10 SEC I

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. 2016-05 SEC I 252.209-7004 Subcontracting with Firms that are Owned or Controlled by the

Government of a Country that is a State Sponsor of Terrorism.

2019-05 SEC I

252.211-7007 Reporting of Government-Furnished Property. 2012-08 SEC I 252.215-7007 Notice of Intent to Resolicit. 2012-06 SEC K 252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors. 2018-01 SEC L 252.219-7012 Competition for Religious-Related Services. 2018-04 SEC I 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous

Materials.

2014-09 SEC I

252.225-7001 Buy American and Balance of Payments Program. 2017-12 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2017-12 SEC I 252.225-7012 Preference for Certain Domestic Commodities. 2017-12 SEC I 252.225-7048 Export-Controlled Items. 2013-06 SEC I 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 2018-12 SEC G 252.232-7010 Levies on Contract Payments. 2006-12 SEC I 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. 2013-06 SEC I 252.243-7001 Pricing of Contract Modifications. 1991-12 SEC I 252.243-7002 Requests for Equitable Adjustment. 2012-12 SEC I 252.244-7000 Subcontracts for Commercial Items 2013-06 SEC I 252.245-7001 Tagging, Labeling, and Marking of Government-Furnished Property. 2012-04 SEC E 252.245-7002 Reporting Loss of Government Property. 2017-12 SEC I 252.245-7003 Contractor Property Management System Administration. 2012-04 SEC I 52.219-14 Limitations on Subcontracting (DEVIATION 2019-O0003) 2017-01 SEC I Deviation 2019-O0003 2019-01 52.219-6 Notice of Total Small Business Set-Aside (DEVIATION 2019-O0003) 2011-11 SEC I Deviation 2019-O0003 2019-01 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain

Federal Transactions.

2007-09 SEC I

52.203-12 Limitation on Payments to Influence Certain Federal Transactions. 2010-10 SEC I 52.203-6 Restrictions on Subcontractor Sales to the Government. - (Alternate I) 2006-09 SEC I Alternate I 1995-10 52.204-16 Commercial and Government Entity Code Reporting. 2016-07 SEC I 52.204-18 Commercial and Government Entity Code Maintenance. 2016-07 SEC K 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper. 2011-05 SEC I

52.204-7 System for Award Management. 2018-10 SEC I 52.204-9 Personal Identity Verification of Contractor Personnel. 2011-01 SEC L 52.214-35 Submission of Offers in U.S. Currency. 1991-04 SEC L 52.217-2 Cancellation Under Multi-year Contracts. 1997-10 SEC I 52.219-8 Utilization of Small Business Concerns. 2018-10 SEC I 52.222-3 Convict Labor. 2003-06 SEC I 52.222-37 Employment Reports on Veterans. 2016-02 SEC I 52.222-54 Employment Eligibility Verification. 2015-10 SEC I 52.222-55 Minimum Wages Under Executive Order 13658. 2015-12 SEC I 52.222-62 Paid Sick Leave Under Executive Order 13706. 2017-01 SEC I 52.223-19 Compliance with Environmental Management Systems. 2011-05 SEC I 52.223-5 Pollution Prevention and Right-to-Know Information. 2011-05 SEC I 52.224-3 Privacy Training. 2017-01 SEC I 52.224-3 Privacy Training. - (Alternate I) 2017-01 SEC I Alternate I 2017-01 52.228-5 Insurance-Work on a Government Installation. 1997-01 SEC I 52.229-3 Federal, State, and Local Taxes. 2013-02 SEC I 52.232-17 Interest. 2014-05 SEC I 52.232-29 Terms for Financing of Purchases of Commercial Items. 2002-02 SEC I 52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 SEC I 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 2013-12 SEC I 52.233-1 Disputes. 2014-05 SEC I 52.237-1 Site Visit. 1984-04 SEC L 52.237-2 Protection of Government Buildings, Equipment, and Vegetation. 1984-04 SEC I 52.242-13 Bankruptcy. 1995-07 SEC I 52.243-1 Changes-Fixed-Price. - (Alternate I) 1987-08 SEC I Alternate I 1984-04 52.245-1 Government Property. 2017-01 SEC I 52.245-9 Use and Charges. 2012-04 SEC I 52.246-25 Limitation of Liability-Services. 1997-02 SEC I 52.246-4 Inspection of Services-Fixed-Price. 1996-08 SEC E 52.249-2 Termination for Convenience of the Government (Fixed-Price). 2012-04 SEC I 52.249-8 Default (Fixed-Price Supply and Service). 1984-04 SEC I 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a

Felony Conviction under any Federal Law.

2016-02 SEC I

52.204-1 Approval of Contract. 1989-12 SEC I

PROVISIONS/CLAUSES IN FULL TEXT

CLAUSE NO. CLAUSE TITLE (MONTH

YEAR)

VARIATION

NAME DATE

CLAUSE TEXT

52.203-17 Contractor Employee Whistleblower Rights and

Requirement To Inform Employees of Whistleblower Rights.

(APR 2014)

As prescribed in 3.908-9 , insert the following clause:

Contractor Employee Whistleblower Rights and Requirement to Inform Employees of Whistleblower Rights (Apr 2014)

(a) This contract and employees working on this contract will be subject to the whistleblower rights and remedies in the pilot program on Contractor employee whistleblower protections established at 41 U.S.C. 4712 by section 828 of the National Defense Authorization Act for Fiscal Year 2013 (Pub. L. 112-239) and FAR 3.908.

(b) The Contractor shall inform its employees in writing, in the predominant language of the workforce, of employee whistleblower rights and protections under 41 U.S.C. 4712, as described in section 3.908 of the Federal Acquisition Regulation.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts over the simplified acquisition threshold.

(End of clause)

(End of Clause)

52.204-13 System for Award Management Maintenance. (OCT 2018)

As prescribed in 4.1105(b), use the following clause:

System for Award Management Maintenance. (Oct 2018)

(a) Definitions. As used in this clause- "Electronic Funds Transfer (EFT) indicator" means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for Award Management (SAM) records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

"Registered in the System for Award Management (SAM)" means that-

(1) The Contractor has entered all mandatory information, including the unique entity identifier and the EFT indicator (if applicable), the Commercial and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see subpart 4.14), into SAM;

(2) The Contractor has completed the Core, Assertions, Representations and Certifications, and Points of Contact sections of the registration in SAM;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The Contractor will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record "Active".

"System for Award Management (SAM)" means the primary Government repository for prospective Federal awardee and Federal awardee information and the centralized Government system for certain contracting, grants, and other assistance-related processes. It includes-

(1) Data collected from prospective Federal awardees required for the conduct of business with the Government;

(2) Prospective contractor-submitted annual representations and certifications in accordance with FAR subpart 4.12; and

(3) Identification of those parties excluded from receiving Federal contracts, certain subcontracts, and certain types of Federal financial and non-financial assistance and benefits.

"Unique entity identifier" means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b) If the solicitation for this contract contained the provision 52.204-7 with its Alternate I, and the Contractor was unable to register prior to award, the Contractor shall be registered in SAM within 30 days after award or before three days prior to submission of the first invoice, whichever occurs first.

(c) The Contractor shall maintain registration in SAM during contract performance and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement. The Contractor is responsible for the currency, accuracy and completeness of the data within SAM, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in SAM after the initial registration, the Contractor is required to review and update on an annual basis, from the date of initial registration or subsequent updates, its information in SAM to ensure it is current, accurate and complete. Updating information in SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document.

(d) (1)

(i) If a Contractor has legally changed its business name or "doing business as" name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to-

(A) Change the name in SAM;

(B) Comply with the requirements of subpart 42.12 of the FAR; and

(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor shall provide with the notification sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph (d)(1)(i) of this clause, or fails to perform the agreement at paragraph (d)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in SAM record to reflect an assignee for the purpose of assignment of claims (see FAR subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the EFT clause of this contract.

(3) The Contractor shall ensure that the unique entity identifier is maintained with the entity designated at www.sam.gov for establishment of the unique entity identifier throughout the life of the contract. The Contractor shall communicate any change to the unique entity identifier to the Contracting Officer within 30 days after the change, so an appropriate modification can be issued to update the data on the contract. A change in the unique entity identifier does not necessarily require a novation be accomplished.

(e) Contractors may obtain additional information on registration and annual confirmation requirements at https://www.sam.gov.

52.204-19 Incorporation by Reference of Representations and Certifications. (DEC 2014)

As prescribed in 4.1202(b), insert the following clause.

Incorporation by Reference of Representations and Certifications (Dec 2014) The Contractor's representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of clause)

52.204-22 Alternative Line Item Proposal. (JAN 2017)

As prescribed in 4.1008 , insert the following provision:

Alternative Line Item Proposal (Jan 2017)

(a) The Government recognizes that the line items established in this solicitation may not conform to the Offeror's practices. Failure to correct these issues can result in difficulties in acceptance of deliverables and processing payments. Therefore, the Offeror is invited to propose alternative line items for which bids, proposals, or quotes are requested in this solicitation to ensure that the resulting contract is economically and administratively advantageous to the Government and the Offeror.

(b) The Offeror may submit one or more additional proposals with alternative line items, provided that alternative line items are consistent with subpart 4.10 of the Federal Acquisition Regulation. However, acceptance of an alternative proposal is a unilateral decision made solely at the discretion of the Government. Offers that do not comply with the line items specified in this solicitation may be determined to be nonresponsive or unacceptable.

(End of provision)

52.214-34 Submission of Offers in the English Language. (APR 1991)

As prescribed in 14.201-6(w), insert the following provision:

Submission of Offers in the English Language (Apr 1991) Offers submitted in response to this solicitation shall be in the English language. Offers received in other than English shall be rejected.

52.217-5 Evaluation of Options. (JUL 1990)

As prescribed in 17.208(c), insert a provision substantially the same as the following:

Evaluation of Options (July 1990) Except when it is determined in accordance with FAR 17.206(b) not to be in the Government's best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s).

52.232-11 Extras. (APR 1984)

As prescribed in 32.111(c)(2), insert the following clause, appropriately modified with respect to payment due dates in accordance with agency regulations, in solicitations and contracts when a fixed-price supply contract, fixed-price service contract, or transportation contract is contemplated:

Extras (Apr 1984) Except as otherwise provided in this contract, no payment for extras shall be made unless such extras and the price therefor have been authorized in writing by the Contracting Officer.

(End of clause)

52.232-8 Discounts for Prompt Payment. (FEB 2002)

As prescribed in 32.111(b)(1), insert the following clause:

Discounts for Prompt Payment (Feb 2002)

(a) Discounts for prompt payment will not be considered in the evaluation of offers. However, any offered discount will form a part of the award, and will be taken if payment is made within the discount period indicated in the offer by the offeror. As an alternative to offering a discount for prompt payment in conjunction with the offer, offerors awarded contracts may include discounts for prompt payment on individual invoices.

(b) In connection with any discount offered for prompt payment, time shall be computed from the date of the invoice. If the Contractor has not placed a date on the invoice, the due date shall be calculated from the date the designated billing office receives a proper invoice, provided the agency annotates such invoice with the date of receipt at the time of receipt. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or, for an electronic funds transfer, the specified payment date. When the discount date falls on a Saturday, Sunday, or legal holiday when Federal Government offices are closed and Government business is not expected to be conducted, payment may be made on the following business day.

252.215-7008 Only One Offer. (JUN 2019)

As prescribed at 215.408(3), use the following provision:

ONLY ONE OFFER (JUN 2019)

(a) Cost or pricing data requirements. After initial submission of offers, if the Contracting Officer notifies the Offeror that only one offer was received, the Offeror agrees to-

(1) Submit any additional cost or pricing data that is required in order to determine whether the price is fair and reasonable or to comply with the statutory requirement for certified cost or pricing data (10 U.S.C. 2306a and FAR 15.403-3); and

(2) Except as provided in paragraph (b) of this provision, if the acquisition exceeds the certified cost or pricing data threshold and an exception to the requirement for certified cost or pricing data at FAR 15.403-1(b)(2) through (5) does not apply, certify all cost or pricing data in accordance with paragraph (c) of DFARS provision 252.215-7010, Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data, of this solicitation.

(b) Canadian Commercial Corporation. If the Offeror is the Canadian Commercial Corporation, certified cost or pricing data are not required. If the Contracting Officer notifies the Canadian Commercial Corporation that additional data other than certified cost or pricing data are required in accordance with DFARS 225.870-4(c), the Canadian Commercial Corporation shall obtain and provide the following:

(1) Profit rate or fee (as applicable).

(2) Analysis provided by Public Works and Government Services Canada to the Canadian Commercial Corporation to determine a fair and reasonable price (comparable to the analysis required at FAR 15.404-1).

(3) Data other than certified cost or pricing data necessary to permit a determination by the U.S. Contracting Officer that the proposed price is fair and reasonable N/A.

(4) As specified in FAR 15.403-3(a)(4), an offeror who does not comply with a requirement to submit data that the U.S. Contracting Officer has deemed necessary to determine price reasonableness or cost realism is ineligible for award unless the head of the contracting activity determines that it is in the best interest of the Government to make the award to that offeror.

(c) Subcontracts. Unless the Offeror is the Canadian Commercial Corporation, the Offeror shall insert the substance of this provision, including this paragraph (c), in all subcontracts exceeding the simplified acquisition threshold defined in FAR part 2.

252.232-7007 Limitation of Governments Obligation. (APR 2014)

As prescribed in 232.705-70, use the following clause:

LIMITATION OF GOVERNMENTS OBLIGATION (APR 2014)

(a) Contract line item(s) [Contracting Officer insert after negotiations]is/are incrementally funded. For this/these item(s), the sum of $ [Contracting Officer insert after negotiations]of the total price is presently available for payment and allotted to this contract. An allotment schedule is set forth in paragraph (j) of this clause.

(b) For item(s) identified in paragraph (a) of this clause, the Contractor agrees to perform up to the point at which the total amount payable by the Government, including reimbursement in the event of termination of those item(s) for the Governments convenience, approximates the total amount currently allotted to the contract. The Contractor is not authorized to continue work on those item(s) beyond that point. The Government will not be obligated in any event to reimburse the Contractor in excess of the amount allotted to the contract for those item(s) regardless of anything to the contrary in the clause entitled Termination for Convenience of the Government. As used in this clause, the total amount payable by the Government in the event of termination of applicable contract line item(s) for convenience includes costs, profit, and estimated termination settlement costs for those item(s).

(c) Notwithstanding the dates specified in the allotment schedule in paragraph (j) of this clause, the Contractor will notify the Contracting Officer in writing at least ninety days prior to the date when, in the Contractors best judgment, the work will reach the point at which the total amount payable by the Government, including any cost for termination for convenience, will approximate 85 percent of the total amount then allotted to the contract for performance of the applicable item(s). The notification will state (1) the estimated date when that point will be reached and (2) an estimate of additional funding, if any, needed to continue performance of applicable line items up to the next scheduled date for allotment of funds identified in paragraph (j) of this clause, or to a mutually agreed upon substitute date. The notification will also advise the Contracting Officer of the estimated amount of additional funds that will be required for the timely performance of the item(s) funded pursuant to this clause, for a subsequent period as may be specified in the allotment schedule in paragraph (j) of this clause or otherwise agreed to by the parties. If after such notification additional funds are not allotted by the date identified in the Contractors notification, or by an agreed substitute date, the Contracting Officer will terminate any item(s) for which additional funds have not been allotted, pursuant to the clause of this contract entitled Termination for Convenience of the Government.

(d) When additional funds are allotted for continued performance of the contract line item(s) identified in paragraph

(a) of this clause, the parties will agree as to the period of contract performance which will be covered by the funds.

The provisions of paragraphs (b) through (d) of this clause will apply in like manner to the additional allotted funds and agreed substitute date, and the contract will be modified accordingly.

(e) If, solely by reason of failure of the Government to allot additional funds, by the dates indicated below, in amounts sufficient for timely performance of the contract line item(s) identified in paragraph (a) of this clause, the Contractor incurs additional costs or is delayed in the performance of the work under this contract and if additional funds are allotted, an equitable adjustment will be made in the price or prices (including appropriate target, billing, and ceiling prices where applicable) of the item(s), or in the time of delivery, or both. Failure to agree to any such equitable adjustment hereunder will be a dispute concerning a question of fact within the meaning of the clause entitled Disputes.

(f) The Government may at any time prior to termination allot additional funds for the performance of the contract line item(s) identified in paragraph (a) of this clause.

(g) The termination provisions of this clause do not limit the rights of the Government under the clause entitled

Default. The provisions of this clause are limited to the work and allotment of funds for the contract line item(s) set forth in paragraph (a) of this clause. This clause no longer applies once the contract is fully funded except with regard to the rights or obligations of the parties concerning equitable adjustments negotiated under paragraphs (d) and (e) of this clause.

(h) Nothing in this clause affects the right of the Government to terminate this contract pursuant to the clause of this contract entitled Termination for Convenience of the Government.

(i) Nothing in this clause shall be construed as authorization of voluntary services whose acceptance is otherwise prohibited under 31 U.S.C. 1342.

(j) The parties contemplate that the Government will allot funds to this contract in accordance with the following schedule:

| On execution of contract || $ ____ | | (month) (day), (year) || $ ____ | | (month) (day), (year) || $ ____ |

252.245-7004

Reporting, Reutilization, and Disposal. (DEC 2017)

As prescribed in 245.107(5), use the following clause:

REPORTING, REUTILIZATION, AND DISPOSAL (DEC 2017)

(a) Definitions. As used in this clause-

(1) Demilitarization means the act of eliminating the functional capabilities and inherent military design features from DoD personal property. Methods and degree range from removal and destruction of critical features to total destruction by cutting, tearing, crushing, mangling, shredding, melting, burning, etc.

(2) Export-controlled items means items subject to the Export Administration Regulations (EAR) (15 CFR parts

730-774) or the International Traffic in Arms Regulations [(ITAR)] (22 CFR parts 120-130). The term includes-

(i) Defense items, defined in the Arms Export Control Act, 22 U.S.C. 2778(j)(4)(A), as defense articles, defense services, and related technical data, etc.; and

(ii) Items, defined in the EAR as commodities, software, and technology, terms that are also defined in the EAR, 15

CFR 772.1.

(3) Ineligible transferees means individuals, entities, or countries-

(i) Excluded from Federal programs by the General Services Administration as identified in the System for Award

Management Exclusions located at https://www.acquisition.gov;

(ii) Delinquent on obligations to the U.S. Government under surplus sales contracts;

(iii) Designated by the Department of Defense as ineligible, debarred, or suspended from defense contracts; or

(iv) Subject to denial, debarment, or other sanctions under export control laws and related laws and regulations, and orders administered by the Department of State, the Department of Commerce, the Department of Homeland Security, or the Department of the Treasury.

(4) Scrap means property that has no value except for its basic material content. For purposes of demilitarization, scrap is defined as recyclable waste and discarded materials derived from items that have been rendered useless beyond repair, rehabilitation, or restoration such that the items original identity, utility, form, fit, and function have been destroyed. Items can be classified as scrap if processed by cutting, tearing, crushing, mangling, shredding, or melting. Intact or recognizable components and parts are not scrap.

(5) Serviceable or usable property means property with potential for reutilization or sale as is or with minor repairs or alterations.

(b) Inventory disposal schedules. Unless disposition instructions are otherwise included in this contract, the

Contractor shall complete SF 1428, Inventory Schedule B, within the Plant Clearance Automated Reutilization Screening System (PCARSS). Information on PCARSS can be obtained from the plant clearance officer and at http://www.dcma.mil/WBT/PCARSS/.

(1) The SF 1428 shall contain the following:

(i) If known, the applicable Federal Supply Code (FSC) for all items, except items in scrap condition.

(ii) If known, the manufacturer name for all aircraft components under Federal Supply Group (FSG) 16 or 17 and

FSCs 2620, 2810, 2915, 2925, 2935, 2945, 2995, 4920, 5821, 5826, 5841, 6340, and 6615.

(iii) The manufacturer name, make, model number, model year, and serial number for all aircraft under FSCs 1510 and 1520.

(iv) Appropriate Federal Condition Codes. See Appendix 2 of DLM 4000.25-2, Military Standard Transaction

Reporting and Accounting Procedures (MILSTRAP) manual, edition in effect as of the date of this contract.

Information on Federal Condition Codes can be obtained at http://www.dla.mil/HQ/InformationOperations/DLMS/elibrary/manuals/MILSTRAP/.

(2) If the schedules are acceptable, the plant clearance officer shall complete and send the Contractor a DD Form

1637, Notice of Acceptance of Inventory.

(c) Proceeds from sales of surplus property. Unless otherwise provided in the contract, the proceeds of any sale, purchase, or retention shall be-

(1) Forwarded to the Contracting Officer;

(2) Credited to the Government as part of the settlement agreement;

(3) Credited to the price or cost of the contract; or

(4) Applied as otherwise directed by the Contracting Officer.

(d) Demilitarization, mutilation, and destruction. If demilitarization, mutilation, or destruction of contractor inventory is required, the Contractor shall demilitarize, mutilate, or destroy contractor inventory, in accordance with the terms and conditions of the contract and consistent with Defense Demilitarization Manual, DoDM 4160.28-M, edition in effect as of the date of this contract. The plant clearance officer may authorize the purchaser to demilitarize, mutilate, or destroy as a condition of sale provided the property is not inherently dangerous to public health and safety.

(e) Classified Contractor inventory. The Contractor shall dispose of classified contractor inventory in accordance with applicable security guides and regulations or as directed by the Contracting Officer.

(f) Inherently dangerous Contractor inventory. Contractor inventory dangerous to public health or safety shall not be disposed of unless rendered innocuous or until adequate safeguards are provided.

(g) Contractor inventory located in foreign countries. Consistent with contract terms and conditions, property disposition shall be in accordance with foreign and U.S. laws and regulations, including laws and regulations involving export controls, host nation requirements, Final Governing Standards, and Government-to-Government agreements. The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause.

(h) Disposal of scrap.

(1) Contractor with scrap procedures.

(i) The Contractor shall include within its property management procedure, a process for the accountability and management of Government-owned scrap. The process shall, at a minimum, provide for the effective and efficient disposition of scrap, including sales to scrap dealers, so as to minimize costs, maximize sales proceeds, and, contain the necessary internal controls for mitigating the improper release of non-scrap property.

(ii) The Contractor may commingle Government and contractor-owned scrap and provide routine disposal of scrap, with plant clearance officer concurrence, when determined to be effective and efficient.

(2) Scrap warranty. The plant clearance officer may require the Contractor to secure from scrap buyers a DD Form

1639, Scrap Warranty.

(i) Sale of surplus Contractor inventory.

(1) The Contractor shall conduct sales of contractor inventory (both useable property and scrap) in accordance with the requirements of this contract and plant clearance officer direction.

(2) Any sales contracts or other documents transferring title shall include the following statement:

``The Purchaser certifies that the property covered by this contract will be used in (name of country). In the event of resale or export by the Purchaser of any of the property, the Purchaser agrees to obtain the appropriate U.S. and foreign export or re-export license approval.

(j) Restrictions on purchase or retention of Contractor inventory.

(1) The Contractor may not knowingly sell the inventory to any person or that person's agent, employee, or household member if that person-

(i) Is a civilian employee of the DoD or the U.S. Coast Guard;

(ii) Is a member of the armed forces of the United States, including the U.S. Coast Guard; or

(iii) Has any functional or supervisory responsibilities for or within the DoDs property disposal/disposition or plant clearance programs or for the disposal of contractor inventory.

(2) The Contractor may conduct Internet-based sales, to include use of a third party.

(3) If the Contractor wishes to bid on the sale, the Contractor or its employees shall submit bids to the plant clearance officer prior to soliciting bids from other prospective bidders.

(4) The Contractor shall solicit a sufficient number of bidders to obtain adequate competition. Informal bid procedures shall be used, unless the plant clearance officer directs otherwise. The Contractor shall include in its invitation for bids, the sales terms and conditions provided by the plant clearance officer.

(5) The Contractor shall solicit bids at least 15 calendar days before bid opening to allow adequate opportunity to inspect the property and prepare bids.

(6) For large sales, the Contractor may use summary lists of items offered as bid sheets with detailed descriptions attached.

(7) In addition to mailing or delivering notice of the proposed sale to prospective bidders, the Contractor may

(when the results are expected to justify the additional expense) display a notice of the proposed sale in appropriate public places, e.g., publish a sales notice on the Internet in appropriate trade journals or magazines and local newspapers.

(8) The plant clearance officer or representative will witness the bid opening. The Contractor shall submit, either electronically or manually, two copies of the bid abstract.

(9) The following terms and conditions shall be included in sales contracts involving the demilitarization, mutilation, or destruction of property:

(i) Demilitarization, mutilation, or destruction on Contractor or subcontractor premises. Item(s) ____ require demilitarization, mutilation, or destruction by the Purchaser. Insert item number(s) and specific demilitarization, mutilation, or destruction requirements for item(s) shown in Defense Demilitarization Manual, DoDM 4160.28-M, edition in effect as of the date of this contract. Demilitarization shall be witnessed and verified by a Government representative using DRMS Form 145 or equivalent.

(ii) Demilitarization, mutilation, or destruction off Contractor or subcontractor premises.

(A) Item(s) ____ require demilitarization, mutilation, or destruction by the Purchaser. Insert item number(s) and specific demilitarization, mutilation, or destruction requirements for item(s) shown in Defense Demilitarization

Manual, DoDM 4160.28-M, edition in effect as of the date of this contract. Demilitarization shall be witnessed and verified by a Government representative using DRMS Form 145 or equivalent.

(B) Property requiring demilitarization shall not be removed, and title shall not pass to the Purchaser, until demilitarization has been accomplished and verified by a Government representative. Demilitarization will be accomplished as specified in the sales contract. Demilitarization shall be witnessed and verified by a Government representative using DRMS Form 145 or equivalent.

(C) The Purchaser agrees to assume all costs incident to the demilitarization and to restore the working area to its present condition after removing the demilitarized property.

(iii) Failure to demilitarize. If the Purchaser fails to demilitarize, mutilate, or destroy the property as specified in the contract, the Contractor may, upon giving 10 days written notice from date of mailing to the Purchaser

(A) Repossess, demilitarize, and return the property to the Purchaser, in which case the Purchaser hereby agrees to pay to the Contractor, prior to the return of the property, all costs incurred by the Contractor in repossessing, demilitarizing, and returning the property;

(B) Repossess, demilitarize, and resell the property, and charge the defaulting Purchaser with all costs incurred by the Contractor. The Contractor shall deduct these costs from the purchase price and refund the balance of the purchase price, if any, to the Purchaser. In the event the costs exceed the purchase price, the defaulting Purchaser hereby agrees to pay these costs to the Contractor; or

(C) Repossess and resell the property under similar terms and conditions. In the event this option is exercised, the

Contractor shall charge the defaulting Purchaser with all costs incurred by the Contractor. The Contractor shall deduct these costs from the original purchase price and refund the balance of the purchase price, if any, to the defaulting Purchaser. Should the excess costs to the Contractor exceed the purchase price, the defaulting Purchaser hereby agrees to pay these costs to the Contractor.

(End of clause)

(End of Clause)

52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (DEVIATION 2019-O0003) (OCT 2014)

Deviation 2019- O0003

2019-04

NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZONE SMALL BUSINESS CONCERNS

(DEVIATION 2019-O0003)

(a) Definitions. As used in this clause?

?HUBZone small business concern? means a small business concern, certified by the Small Business Administration (SBA), that appears on the List of Qualified HUBZone Small Business Concerns maintained by the

SBA (13 CFR 126.103).

?Similarly situated entity? means a first-tier subcontractor, including an independent contractor, that has the same small business program status as that which qualified the prime contractor for the award; as is considered small for the NAICS code the prime contractor assigned to the subcontract the subcontractor will perform. An example of a similarly situated entity is a first-tier subcontractor that is a HUBZone small business concern for a HUBZone set-aside or sole source award under the HUBZone Program.

(b) Evaluation preference.

(1) Offers will be evaluated by adding a factor of 10 percent to the price of all offers, except?

(i) Offers from HUBZone small business concerns that have not waived the evaluation preference; and

(ii) Otherwise successful offers from small business concerns.

(2) The factor of 10 percent shall be applied on a line item basis or to any group of items on which award may be made. Other evaluation factors described in the solicitation shall be applied before application of the factor.

(3) When the two highest rated offerors are a HUBZone small business concern and a large business, and the evaluated offer of the HUBZone small business concern is equal to the evaluated offer of the large business after considering the price evaluation preference, award will be made to the HUBZone small business concern.

(c) Waiver of evaluation preference. A HUBZone small business concern may elect to waive the evaluation preference, in which case the factor will be added to its offer for evaluation purposes. The agreements in paragraphs (d) and (e) of this clause do not apply if the offeror has waived the evaluation preference.

____ Offeror elects to waive the evaluation preference.

(d) Independent contractors. An independent contractor shall be considered a subcontractor.

(e) Agreement. By submission of an offer and execution of a contract, a HUBZone small business concern agrees that, in the case of a contract for?

(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the 50 percent subcontract amount that cannot be exceeded;

(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the 50 percent subcontract amount that cannot be exceeded;

(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the 85 percent subcontract amount that cannot be exceeded; or

(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the 75 percent subcontract amount that cannot be exceeded.

(f) A HUBZone joint venture agrees that the aggregate of the HUBZone small business concerns to the joint venture, not each concern separately, will perform the applicable requirements specified in paragraph (d) of this clause.

(g) Notice. The HUBZone small business offeror acknowledges that a prospective HUBZone awardee must be a HUBZone small business concern at the time of award of this contract. The HUBZone offeror shall provide the Contracting Officer a copy of the notice required by 13 CFR 126.501 if material changes occur before contract award that could affect its HUBZone eligibility. If the apparently successful HUBZone offeror is not a HUBZone small business concern at the time of award of this contract, the Contracting Officer will proceed to award to the next otherwise successful HUBZone small business concern or other offeror.

52.212-3 Offeror Representations and Certifications-Commercial Items. - (Alternate I) (OCT 2018) Alternate

I 2014-10

As prescribed in 12.301(b)(2), insert the following provision:

Offeror Representations and Certifications-Commercial Items (Oct 2018) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u)) of this provision.

(a) Definitions. As used in this provision- Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.Sensitive technology- Sensitive technology-

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern-

(1) Means a small business concern-

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veteransor, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16).

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

Small disadvantaged business concern, consistent with13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that-

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by-

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned-

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term successor does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern-

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

Women-owned small business concern means a small business concern-

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

(…