Momentive_RTV_224B_Silicone_Catalyst_SDS.pdf
PDF 129 KB Posted
- Attached to
- Silicone Kits
- Solicitation number
- FA461019QA017
About this file
Separate files were uploaded in case zip file is not able to open.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Momentive.PDF | ||
| Solicitation_-_FA461019QA017.pdf | ||
| Zip_File_(FA461019QA016).url | URL file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Version: 3.1 Revision Date: 04/28/2017
RTV224B
SDS_US 1/16
SAFETY DATA SHEET
1. Identification
Product identifier: RTV224B
Other means of identification
Synonyms: Silicone Compound -- Component B
Recommended use and restriction on use
Recommended use: Silicone Elastomer (B) Restrictions on use: Not known.
Manufacturer/Importer/Distr ibutor Information
: Momentive Performance Materials LLC 260 Hudson River Road Waterford NY 12188
Contact person : commercial.services@momentive.com
Telephone : General information +1-800-295-2392
Emergency telephone number
Supplier : CHEMTREC 1-800-424-9300
2. Hazard(s) identification
Hazard Classification
Health Hazards
Serious Eye Damage/Eye Irritation Category 1
Skin sensitizer Category 1
Toxic to reproduction Category 1B
Unknown toxicity - Health
Acute toxicity, oral 0 %
Acute toxicity, dermal 0 %
Acute toxicity, inhalation, vapor 0 %
Acute toxicity, inhalation, dust or mist 0 %
Label Elements
SDS_US 2/16
Hazard Symbol:
Signal Word: Danger
Hazard Statement: H318; Causes serious eye damage.
H317; May cause an allergic skin reaction.
H360; May damage fertility or the unborn child.
Precautionary Statements
Prevention: Wear protective gloves/protective clothing/eye protection/face protection.
Avoid breathing dust/fume/gas/mist/vapors/spray. Contaminated work clothing must not be allowed out of the workplace. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required.
Response: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.
Immediately call a POISON CENTER/doctor. Specific treatment (see this label). Wash contaminated clothing before reuse.
Storage: Store locked up.
Disposal: Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in GHS classification:
None.
3. Composition/information on ingredients
SDS_US 3/16
Mixtures
Chemical Identity CAS number Content in percent (%)* Notes
SILOXANES AND
SILICONES, DI-ME
63148-62-9 >=60 - <=70% No data available.
(1) Carbon Black 1333-86-4 >=15 - <=20% # This substance has workplace exposure limit(s).
Tris(3(trimethoxysilyl)propyl)is ocyanurate
26115-70-8 5 - <10% No data available.
Gamma- Aminopropyltrimethoxysilane
13822-56-5 5 - <10% No data available.
TETRA-N-PROPYL-SILICATE 682-01-9 1 - <5% No data available.
DIBUTYL TINOXIDE (48% as Tin)
818-08-6 0.3 - <1% # This substance
DI-(2-
ETHYLHEXYL)PHTHALATE
117-81-7 0.3 - <1% # This substance
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
(1) The respirable particle(s) listed above are inextricably bound within the polymer matrix, and therefore does not present an inhalation hazard during normal use of this product. Tooling or machining of the cured product (sanding, cutting, milling) may release hazardous, respirable substances.
4. First-aid measures
Ingestion: If swallowed, do NOT induce vomiting. Give a glass of water.
Inhalation: If inhaled, remove to fresh air. If not breathing give artificial respiration using a barrier device. If breathing is difficult give oxygen. Get medical attention.
Skin Contact: In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes. Get medical attention.
Eye contact: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Most important symptoms/effects, acute and delayed
Symptoms: None known.
Hazards: No data available.
SDS_US 4/16
Indication of immediate medical attention and special treatment needed
Treatment: No data available.
5. Fire-fighting measures
General Fire Hazards: No data available.
Suitable (and unsuitable) extinguishing media
Suitable extinguishing media:
Foam. Carbon dioxide
Unsuitable extinguishing media:
No data available.
Specific hazards arising from the chemical:
Special protective equipment and precautions for firefighters
Special fire fighting procedures:
Special protective equipment for fire-fighters:
Combustible Wear appropriate personal protective equipment.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Combustible Avoid contact with skin and eyes. Use only in well-ventilated areas. Remove and wash contaminated clothing promptly.
Methods and material for containment and cleaning up:
Wipe, scrape, or soak up in an inert material and put in a container intended for flammable materials for disposal. Wear proper protective equipment as specified in the protective equipment section. Warn other workers of spill. Keep unauthorized personnel away.
7. Handling and storage
Precautions for safe handling: Sensitivity to static discharge is expected; material has a flash point below
200 F.
Conditions for safe storage, including any incompatibilities:
SDS_US 5/16
8. Exposure controls/personal protection
Control Parameters
Occupational Exposure Limits
Chemical Identity Type Exposure Limit Values Source
(1) Carbon Black - Inhalable fraction.
TWA 3 mg/m3 US. ACGIH Threshold Limit Values (03 2015)
(1) Carbon Black REL 0.1 mg/m3 US. NIOSH: Pocket Guide to Chemical Hazards (2010)
REL 3.5 mg/m3 US. NIOSH: Pocket Guide to Chemical Hazards (2010)
PEL 3.5 mg/m3 US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) (02 2006)
TWA 3.5 mg/m3 US. OSHA Table Z-1-A (29 CFR 1910.1000) (1989)
DIBUTYL TINOXIDE (48%
as Tin) - as Sn
STEL 0.2 mg/m3 US. ACGIH Threshold Limit Values (03 2015)
TWA 0.1 mg/m3 US. ACGIH Threshold Limit Values (03 2015)
REL 0.1 mg/m3 US. NIOSH: Pocket Guide to Chemical Hazards (2010)
PEL 0.1 mg/m3 US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) (02 2006)
TWA 0.1 mg/m3 US. OSHA Table Z-1-A (29 CFR 1910.1000) (1989)
TWA 0.1 mg/m3 US. Tennessee. OELs. Occupational Exposure Limits, Table Z1A (06 2008)
DIBUTYL TINOXIDE (48%
as Tin)
AN ESL 0.1 µg/m3 US. Texas. Effects Screening Levels (Texas Commission on Environmental Quality) (03 2014)
ST ESL 1 µg/m3 US. Texas. Effects Screening Levels (Texas Commission on Environmental Quality) (03 2014)
DIBUTYL TINOXIDE (48%
as Tin) - as Sn
TWA PEL 0.1 mg/m3 US. California Code of Regulations, Title 8, Section 5155. Airborne Contaminants (01 2015)
STEL 0.2 mg/m3 US. California Code of Regulations, Title 8, Section 5155. Airborne Contaminants (01 2015)
DI-(2-
ETHYLHEXYL)PHTHALATE
TWA 5 mg/m3 US. ACGIH Threshold Limit Values (03 2015)
REL 5 mg/m3 US. NIOSH: Pocket Guide to Chemical Hazards (2010)
STEL 10 mg/m3 US. NIOSH: Pocket Guide to Chemical Hazards (2010)
PEL 5 mg/m3 US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) (02 2006)
STEL 10 mg/m3 US. OSHA Table Z-1-A (29 CFR 1910.1000) (1989)
TWA 5 mg/m3 US. OSHA Table Z-1-A (29 CFR 1910.1000) (1989)
This product contains one or more substances with an occupational exposure limit. However, the respirable particle(s) of this/these substance(s) are inextricably bound within the polymer matrix. Therefore, we do not expect an exposure to this/these substance(s) during normal use of this product. Tooling or machining of the cured product (sanding, cutting, milling) may release hazardous, respirable substances.
SDS_US 6/16
Appropriate Engineering Controls
Use only in well-ventilated areas.
Individual protection measures, such as personal protective equipment
General information: Ventilation and other forms of engineering controls are preferred for controlling exposures. Respiratory protection may be needed for non-routine or emergency situations.
Eye/face protection: Monogoggles
Skin Protection
Hand Protection: Rubber or plastics gloves
Other: Wear suitable protective clothing and eye/face protection.
Respiratory Protection: Use only in well-ventilated areas.
Hygiene measures: Avoid contact with eyes, skin, and clothing. Wash hands after handling.
9. Physical and chemical properties
Appearance
Physical state: liquid
Form: Paste
Color: Black
Odor: amine like
Odor threshold: No data available.
pH: not applicable
Melting point/freezing point: No data available.
Initial boiling point and boiling range: not applicable
Flash Point: No data available.
Evaporation rate: No data available.
Flammability (solid, gas): No data available.
Upper/lower limit on flammability or explosive limits
Flammability limit - upper (%): No data available.
Flammability limit - lower (%): No data available.
Explosive limit - upper (%): No data available.
Explosive limit - lower (%): No data available.
Heat of combustion: No data available.
Vapor pressure: not applicable
Vapor density: No data available.
SDS_US 7/16
Density: ca. 1,020 g/cm3
Relative density: ca. 1.02
Solubility(ies)
Solubility in water: Reactive.
Solubility (other): No data available.
Partition coefficient (n-octanol/water) Log Pow:
Auto-ignition temperature: No data available.
Decomposition temperature: No data available.
SADT: No data available.
Viscosity, dynamic: No data available.
Viscosity, kinematic: No data available.
VOC: No data available.
10. Stability and reactivity
Reactivity: No dangerous reaction if used as recommended.
Chemical Stability: Material is stable under normal conditions.
Possibility of hazardous reactions:
Hazardous polymerisation does not occur.
Conditions to avoid: Keep away from any contact with water.
Incompatible Materials: Reacts with water liberating small amounts of methanol. Reacts with water forming ethanol. Avoid contact with acids and oxidizing substances.
Hazardous Decomposition
Products:
Carbon dioxide Formaldehyde. Amines. Silicon dioxide. Toxic metal fumes.
Tin fumes. Ethanol. Measurements at temperatures above 150°C in presence of air (oxygen) have shown that small amounts of formaldehyde are formed due to oxidative degradation.
11. Toxicological information
Information on likely routes of exposure
Ingestion: No data available.
Inhalation: No data available.
Skin Contact: No data available.
Eye contact: No data available.
Symptoms related to the physical, chemical and toxicological characteristics Ingestion: No data available.
SDS_US 8/16
Inhalation: No data available.
Skin Contact: No data available.
Eye contact: No data available.
Information on toxicological effects
Acute toxicity (list all possible routes of exposure)
Oral
Product: ATEmix: 4,495.67 mg/kg
Specified substance(s):
SILICONES, DI-ME
LD 50 (Rat, No data available.): > 5,000 mg/kg
Tris(3(trimethoxysilyl)pro pyl)isocyanurate
LD 50 (Rat, No data available.): 2,346 mg/kg
DIBUTYL TINOXIDE
(48% as Tin)
LD 50 (Rat): 487 mg/kg
Dermal
Product: Not classified for acute toxicity based on available data.
Tris(3(trimethoxysilyl)pro pyl)isocyanurate
LD 50 (Rabbit, No data available.): 18,000 mg/kg
Inhalation
Product: Not classified for acute toxicity based on available data.
Repeated dose toxicity Product: No data available.
Skin Corrosion/Irritation
No data available. (Rabbit): No skin irritation
Serious Eye Damage/Eye Irritation
SDS_US 9/16
Gamma- Aminopropyltrimethoxy silane
OECD-Guideline 405 (Acute Eye Irritation/Corrosion) (Rabbit, 72 h): Strongly irritating.
Respiratory or Skin Sensitization
Carcinogenicity
IARC Monographs on the Evaluation of Carcinogenic Risks to Humans:
ETHYLHEXYL)PH
THALATE
US. National Toxicology Program (NTP) Report on Carcinogens:
ETHYLHEXYL)PH
THALATE
US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050):
No carcinogenic components identified
Germ Cell Mutagenicity
In vitro
In vivo
Reproductive toxicity
Specific Target Organ Toxicity - Single Exposure
Specific Target Organ Toxicity - Repeated Exposure
SDS_US 10/16
Aspiration Hazard
Other effects: Product releases amine vapors during cure. Contains dibutyltin compound(s) - May impair fertility. May cause harm to unborn child.
12. Ecological information
Ecotoxicity:
Acute hazards to the aquatic environment:
Fish
LC0 (Leuciscus idus, 96 h): 200 mg/l
Aquatic Invertebrates
Chronic hazards to the aquatic environment:
Fish
LC0 (Leuciscus idus, 4 d): 200 mg/l
Aquatic Invertebrates
Toxicity to Aquatic Plants
Persistence and Degradability
Biodegradation
BOD/COD Ratio
SDS_US 11/16
Bioaccumulative potential Bioconcentration Factor (BCF)
Partition Coefficient n-octanol / water (log Kow)
Mobility in soil: No data available.
Known or predicted distribution to environmental compartments
SILICONES, DI-ME
No data available.
(1) Carbon Black No data available.
Tris(3(trimethoxysilyl)propyl )isocyanurate
No data available.
Gamma- Aminopropyltrimethoxysilan e
No data available.
TETRA-N-PROPYL-
SILICATE
No data available.
DIBUTYL TINOXIDE (48%
as Tin)
No data available.
DI-(2-
ETHYLHEXYL)PHTHALAT
E
Other adverse effects: No data available.
13. Disposal considerations
Disposal instructions: Disposal should be made in accordance with federal, state and local regulations.
Contaminated Packaging: Dispose of as unused product.
14. Transport information
DOT
Not regulated.
IMDG
IATA
SDS_US 12/16
Special precautions for user: This product is not regarded as dangerous goods according to the national and international regulations on the transport of dangerous goods.
15. Regulatory information
US Federal Regulations
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) None present or none present in regulated quantities.
CERCLA Hazardous Substance List (40 CFR 302.4):
Chemical Identity Reportable quantity Methanol 5,000 lbs.
Superfund Amendments and Reauthorization Act of 1986 (SARA)
Hazard categories Immediate (Acute) Health Hazards Delayed (Chronic) Health Hazard
SARA 302 Extremely Hazardous Substance
SARA 304 Emergency Release Notification
SDS_US 13/16
SARA 311/312 Hazardous Chemical Chemical Identity Threshold Planning Quantity
SILOXANES AND
SILICONES, DI-ME
10000 lbs
(1) Carbon Black 10000 lbs Tris(3(trimethoxysilyl)prop yl)isocyanurate
10000 lbs
Gamma- Aminopropyltrimethoxysila ne
10000 lbs
TETRA-N-PROPYL-
SILICATE
10000 lbs
DIBUTYL TINOXIDE (48%
as Tin)
10000 lbs
DI-(2-
ETHYLHEXYL)PHTHALA
TE
10000 lbs
SARA 313 (TRI Reporting)
Chemical Identity
Reporting threshold for other users
Reporting threshold for manufacturing and processing
ETHYLHEXYL)PHTHALATE
Clean Water Act Section 311 Hazardous Substances (40 CFR 117.3)
Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130):
US State Regulations
US. California Proposition 65 This product contains chemical(s) known to the State of California to cause cancer and/or to cause birth defects or other reproductive harm.
(1) Carbon Black Carcinogenic.
ETHYLHEXYL)PHTHALATE
Maximum Allowable Dose Level (MADL): 410 µg/day.
Developmental toxin.
Methanol Maximum Allowable Dose Level (MADL): 47000 µg/day.
Developmental toxin.
Toluene Maximum Allowable Dose Level (MADL): 13000 µg/day.
Developmental toxin.
SDS_US 14/16
US. New Jersey Worker and Community Right-to-Know Act
(1) Carbon Black
DI-(2-ETHYLHEXYL)PHTHALATE
SILOXANES AND SILICONES, DI-ME
Tris(3(trimethoxysilyl)propyl)isocyanurate Gamma-Aminopropyltrimethoxysilane
TETRA-N-PROPYL-SILICATE
US. Massachusetts RTK - Substance List
DI-(2-ETHYLHEXYL)PHTHALATE
US. Pennsylvania RTK - Hazardous Substances
(1) Carbon Black
DI-(2-ETHYLHEXYL)PHTHALATE
US. Rhode Island RTK
No ingredient regulated by RI Right-to-Know Law present.
SDS_US 15/16
Inventory Status:
Australia AICS: n (Negative listing) Remarks: None.
Canada DSL Inventory List: y (positive listing) Remarks: None.
EU EINECS List: y (positive listing) Remarks: None.
Japan (ENCS) List: y (positive listing) Remarks: None.
China Inventory of Existing Chemical Substances:
y (positive listing) Remarks: None.
Korea Existing Chemicals Inv.
(KECI):
n (Negative listing) Remarks: None.
Canada NDSL Inventory: n (Negative listing) Remarks: None.
Philippines PICCS: n (Negative listing) Remarks: None.
US TSCA Inventory: y (positive listing) Remarks: None.
New Zealand Inventory of Chemicals:
n (Negative listing) Remarks: None.
Taiwan. Taiwan inventory
(CSNN):
n (Negative listing) Remarks: None.
16.Other information, including date of preparation or last revision
HMIS Hazard ID
Health * 3
Flammability 1
Physical Hazards 1
PERSONAL PROTECTION
Hazard rating: 0 - Minimal; 1 - Slight; 2 - Moderate; 3 - Serious; 4 - Severe; RNP - Rating not possible; *Chronic health effect
Issue Date: 04/28/2017
Revision Date: No data available.
Version #: 3.1
Further Information: No data available.
SDS_US 16/16
Disclaimer:
Notice to reader
Unless otherwise specified in section 1, Momentive products are intended for use in the manufacture and/or formulation of products and are not intended for direct consumer use. These products are not intended for long-lasting (> 30 days) implantation, injection or direct ingestion into the human body, nor for use in the manufacture of multiple use contraceptives.
Keep out of the reach of children.
Further Information
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.
®,*, and TM indicate trademarks owned by or licensed to Momentive.
File details come from the government source that posted it.