RFP.doc

Section B - Supplies or Services and Prices

Range Maintenance

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Maintenance Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2016 - 30 April 2017

FOB: Destination

NSN: Z1EA-16-RPR-CATM

PURCHASE REQUEST NUMBER: F1G3A25303AW01

SIGNAL CODE: A

NET AMT

Lead Drum Replacement

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Lead Drum Replacement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2016 - 30 April 2017

FOB: Destination

NSN: Z1EA-16-RPR-CATM

NET AMT

Range Cleaning and Abatement

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Cleaning and Abatement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2016 - 30 April 2017

FOB: Destination

NSN: Z1EA-16-RPR-CATM

NET AMT

Replacement Parts NTE $10,000

The contractor shall provide all replacement parts, not to exceed $10,000.00, necessary to repair and maintain CATM Range as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2016 - 30 April 2017

FOB: Destination

NSN: Z1EA-16-RPR-CATM

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Maintenance Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2017 - 30 April 2018

FOB: Destination

NSN: Z1EA-16-RPR-CATM

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Lead Drum Replacement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2017 - 30 April 2018

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Cleaning and Abatement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2017 - 30 April 2018

FOB: Destination

NET AMT

FFP

The contractor shall provide all replacement parts, not to exceed $10,000.00, necessary to repair and maintain CATM Range as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2017 - 30 April 2018

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Maintenance Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2018 - 30 April 2019

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Lead Drum Replacement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2018 - 30 April 2019

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Cleaning and Abatement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2018 - 30 April 2019

FOB: Destination

NET AMT

FFP

The contractor shall provide all replacement parts, not to exceed $10,000.00, necessary to repair and maintain CATM Range as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2018 - 30 April 2019

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Maintenance Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2019 - 30 April 2020

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Lead Drum Replacement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2019 - 30 April 2020

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Cleaning and Abatement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2019 - 30 April 2020

FOB: Destination

NET AMT

FFP

The contractor shall provide all replacement parts, not to exceed $10,000.00, necessary to repair and maintain CATM Range as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2019 - 30 April 2020

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Maintenance Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2020 - 30 April 2021

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Lead Drum Replacement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2020 - 30 April 2021

FOB: Destination

NET AMT

FFP

This is a non-personal service. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Range Cleaning and Abatement Services as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2020 - 30 April 2021

FOB: Destination

NET AMT

FFP

The contractor shall provide all replacement parts, not to exceed $10,000.00, necessary to repair and maintain CATM Range as defined in the performance work statement (PWS) at Barksdale AFB LA. Period of Performance: 1 May 2020 - 30 April 2021

FOB: Destination

NET AMT

Section C - Descriptions and Specifications

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT

CATM HAZARDOUS WASTE DISPOSAL AND RANGE INSPECTION/MAINTENANCE

BARKSDALE AIR FORCE BASE, LOUISIANA

16 FEBRUARY 2016

1. DESCRIPTION OF WORK. The following short work description shall serve as general information only, and shall not limit the contractor’s obligation to conform to all state and local regulations in accordance with standard industry practice.

1.1. GENERAL REQUIREMENTS. The contractor shall supply the necessary personnel, labor, materials, supplies, equipment, transportation, packaging, labels, placards, manifests and all other necessities for, or incident to, the performance of work.

1.2. The contractor shall provide the necessary tools and equipment for the maintenance of the firing range at the Combat Arms Training and Maintenance (CATM) compound, Building 6571, on Barksdale AFB, LA. The maintenance shall be performed on a quarterly basis (i.e., four consecutive (4) quarters within the 12-month period of performance). Personnel performing the maintenance shall be fully trained to perform preventative maintenance checks of all equipment associated with the firing range and fully trained to clean hazardous debris and residue. They shall have a working knowledge of how the bullet trap system works, to include the ability to repair the auger, auger motor, Dust Collection Unit (DCU), and associated equipment used to keep the bullet trap operational. Additionally, they shall be required to fix all mechanical issues associated with the bullet trap/auger system. They shall wear the appropriate personal protective equipment (PPE). The contractor shall inspect bullet trap plates, baffle traps, joint strips, deflectors and chambers for wear. The contractor shall test air compressor and air lines for leaks and change oil as needed. Disposal of all removed components are the contractor's responsibility and we encourage recycling if possible. Copies of weight tickets for any items weighing 100 pounds or more recycled will be turned-in to the Contracting Officer’s Representative (COR).

1.2.1. If parts are needed beyond small, common parts (i.e. screws, nuts, bolts, etc.) to ensure continuous operation of the bullet trap system, the contractor shall notify the COR with a written estimate of parts and labor costs as soon as practical. No repairs shall be accomplished other than routine preventative maintenance without the approval of the COR.

1.3. The contractor shall provide replacement drums to collect residual lead and debris from the bullet trap and dust collection unit and shall ensure the drums meet all Department of Transportation (DOT) requirements for the type and weight of the material collected. The contractor shall test for leaks and functionality of the DCU. The filled drums from the bullet trap and DCU shall be placed on pallets for further handling by either Civil Engineering (CE) or Central Accumulation Point CAP personnel. The contractor shall provide two (2) spare collection barrels at the beginning of each contract year in the event drums attain capacity prior to routine service.

1.4. The contractor shall be responsible for cleaning the range floor, bullet trap and gutter per Appendix A This shall include removing all debris, casings, and standing water prior to High Efficiency Particulate Air HEPA vacuuming the entire range floor, walls, bullet trap plates, and gutter. If standing water is present, it should be squeegeed within the confines of the range allowing it to air dry. The contractor shall also wet wipe touchable surfaces at the firing line (barricades and all countertops and tables on the range and in the control tower). The contractor shall also clean and replace DCU filters as needed to ensure proper operation of the DCU and supporting equipment. Waste minimization techniques will be used during the cleanup process. Every effort will be made to ensure waste generation is kept to a minimum i.e reuse gear/protective paper as much as possible, ensure no trash gets placed into hazardous waste containers, use the minimum amounts of materials to get the job done. Prior to the start of any work, the contractor will meet with 2CES/CEIE personnel to discuss cleaning process and identify waste streams.

1.5. Successful cleaning of the range shall be accomplished after submission of independent third party testing results of cleaning swatch samples taken after vacuuming has been completed at 20 random locations as follows: The testing areas and standards of successful cleaning shall be at: Inside the Control Tower at one (1) random locations measuring less than 200 ug/sf, Firing Line at three (3) random locations shall below 200ug/sf, East and West walls at three (3) random locations on each wall, range floors at five (5) random locations, front of the bullet trap at three (3) random locations, and rear of the bullet trap at two (2) random locations shall all be less than 400ug/sf.

1.6. Hours. The period of time required to perform maintenance actions will be one week. The duty hours to accomplish this work shall take place between the hours of 8:00 a.m. and 4:00 p.m. Central Standard Time (CST), Monday through Friday. Maintenance shall be conducted every quarter. The contractor shall coordinate the exact dates for cleaning/service at least 30 days prior to the actual scheduled date of service with Range personnel and inform the COR of the maintenance dates. In the event of reperformance, the contractor shall schedule with CATM personnel for the earliest possible date.

1.7. Pick-up and Removal Schedule. The contractor shall retrieve all equipment it provided upon completion of the job.

2. SERVICES SUMMARY

2.1. Services Performance. The contract service requirements are summarized in performance objectives relating directly to mission essential items. The performance threshold briefly describes the minimally acceptable levels of service required for each requirement. The Services Summary (SS) and the contractor’s Quality Control Plan provide information on contract requirements, the expected level of contractor performance and the expected method of government validation and confirmation of services provided. These thresholds are critical to mission success. Procedures as set forth in the FAR 52.212-4 (a), Contract Terms and Conditions - Commercial Items, Inspection/Acceptance, will be used to remedy all deficiencies.

SS-1

Preventative Maintenance/Inspection

Within 24 hours of notification

SS-2

Projectile/DCU Collection Barrel Change-Out

Within 24 hours of notification

SS-3

De-leading/Range Cleaning (Walls/Floors/Barricades/Countertops/

Control Tower)

Within 24 hours of notification

2.1. QUALITY CONTROL. The contractor shall provide a written description of the quality control system to include identification of the commercial practices and procedures to be used, such as those of the American National Standards Institute (ANSI), Occupational Safety Hazards Administration (OSHA). Include the inspection system requirements of FAR 52.246-4 in this document. The contractor shall develop and implement procedures to identify, prevent, and ensure non-performance and continual repeat of defective service does not occur. A written Quality Control Plan shall be submitted to the contracting officer for review and feedback within 15 days after contract award. The plan shall be submitted no later than the pre-performance conference. The plan shall specifically address the contractor’s strategy to provide quality workmanship, continual process improvement and for correcting deficiencies as required.

2.2. Quality Assurance. The government shall inspect and evaluate the contractor’s performance to ensure services are received in accordance with requirements set forth in this contract. The CO or COR shall inspect by validating actual work performance, physically checking an attribute of the completed task, checking a management information report, investigating customer complaints, conferring with facility managers, or otherwise inspecting the task or its results to determine whether or not performance meets the standards contained in this PWS. The CO or COR will use the contractor’s work schedule or modified version thereof, to record validation results. Results of the validation then become the official Air Force record of the Contractor’s performance. When a performance threshold has not been met or contractor performance has not been accomplished, the COR will initiate and provide the Contracting Officer a Contract Discrepancy Report (CDR) DD Form 2772 for issuance to the contractor. The contractor shall respond to the CDR IAW instructions provided and return it to the Contracting Officer within 10 calendar days of receipt.

2.3. Performance Assessment. Any unsatisfactory inspection (defect) result shall be recorded, and the Contractor shall re-perform the service at no additional cost to the Government after notification by the CO or COR. Failing to meet the performance threshold as outlined in the SS for any of these performance objectives in any one quarterly period shall result in a warning or letter of concern from the CO. Failing to meet the performance threshold as outlined in the SS of these performance objectives in any combination for any two, or more consecutive or non-consecutive quarterly periods during a contract year shall constitute an immediate Progress Meeting with the Multi-functional Team. All remedies shall be in accordance with the FAR 52.212-4 (a), Contract Terms and Conditions - Commercial Items, Inspection/Acceptance.

2.4. Periodic Performance Meetings. The CO, Functional Commander, COR, other government personnel as appropriate, and the Contractor shall periodically meet to discuss the Contractor’s performance. The following issues shall be discussed, opportunities to improve the contract, any modifications required of the contract, unsatisfactory inspections and trends against each performance objective observed, positive performance and steps taken by the Contractor to prevent unsatisfactory occurrences in the future. The Contractor shall provide a summation of unsatisfactory inspections and customer complaints and provide insight into any identified trends.

The minutes of these meetings will be reduced to writing, signed by the CO and any other signatures as deemed appropriate, distributed to the functional area and the contractor. Should the contractor not concur with the minutes, the contractor shall provide a written notification to the CO identifying areas of non-concurrence for resolution.

3. GOVERNMENT FURNISHED PROPERTY AND SERVICES: Government will meet all customer required support needed for the contractor to fulfill this contract. The Government will provide water, electric and lighting. Restroom facilities will be made available to the contractor in the performance of their work.

3.1. Government Remedies: The Contracting Officer will follow FAR 52.212-4, Contract Terms and Conditions- Commercial Items, for contractor’s failure to perform satisfactory services or failure to correct non-conforming services.

3.2. All solid and liquid waste accumulated in the performance of this PWS shall properly collected and secured by the contractor with containers moved to a Government directed location on-site. Disposal activities of non-hazardous and hazardous waste shall be accomplished by CE or CAP personnel.

4. GENERAL INFORMATION.

4.1. Recognized Holidays: New Year’s Day, Martin Luther King Day, President’s Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, and Christmas Day.

NOTE: No work shall be performed on Saturdays, Sundays, or any day the Base is closed due to exercise, elevated security posture, inclement weather causing closure of the base to non-essential personnel, and/or declared down days.

4.2. Security Requirements. All personnel employed by the contractor in the performance of this contract, or any representative of the Contractor entering the government installation shall abide by the security regulations of the installation. Contractor vehicles driven onto the base will be subject to inspection at entry gate, including but not limited to, military working dog searches. All vehicle drivers must possess a valid driver’s license, current vehicle registration and insurance for base entry. Contractors shall ensure their employees and those of their subcontracts have the proper credentials allowing them to work in the United States. Those found to be undocumented or illegal aliens will be remanded to the proper authorities.

4.2.1. All contractor vehicles shall be identified with company name and phone contact information located on the driver and passenger sides of the vehicle, with the exception of special purpose vehicles (forklifts and trailers).

4.3. Responsibility. The Contractor is responsible for non-foreseeable damage caused by negligence.

4.4. SAFETY. The contractor shall be responsible for all means and methods as they relate to safety and shall comply with all local, state and federal requirements. All personnel shall be instructed to be mindful of maintaining a safe environment for the base and the CATM compound occupants. The contractor shall ensure all personnel involved in handling and packaging any materials or wastes be trained for the level of expertise required for the proper performance of the task and, in particular, in the areas of chemical incompatibility, general first aid procedures and spill response. Waste handling equipment and personal protective equipment shall be provided by the contractor and shall be appropriated to ensure safe handling of all materials and wastes. Contractor personnel and equipment shall be subject to OSHA while on Barksdale AFB property.

4.5. Spill Responsibility. The contractor shall be solely responsible for any and all spills or leaks, and subsequent cleanup, which occur as a result of, or are contributed to by, the actions of the contractor, the contractor’s agents, employees, or sub-contractors. The contractor shall clean up such spills or leaks following industry standard practice and in a manner that complies with OSHA standards and applicable federal, state, and local regulations, at no additional cost to the government. Immediately upon discovery, the contractor shall contact the base Fire Department and notify them of any spill or leak which occurs during the performance of work under this contract, regardless of the spill quantity.

APPENDIX A

Estimated Workload Frequency

Description

Frequency/Interval

Preventative Maintenance/Inspection

Quarter

Projectile/DCU Barrel Collection Change-Out

Quarter

De-leading/Range Cleaning (Walls/Floors/Barricades/Counter Tops

Semi-Annual

/Control Tower)

OTHER CONTRACT SPECIFICATIONS

ADMINISTRATIVE DATA

(a) Following award, this contract will be administered by the 2d Contracting Squadron. The name, address, telephone number, and fax number of the Contracting Officer and Administrator are as follows:

CO: Erin K. VanCise

2d Contracting Squadron

801 Kenney Ave, Suite 2301

Barksdale AFB LA 71110-2079

Phone: 318-456-5205

Fax: 318-456-3648

E-mail: erin.vancise@us.af.mil

Admin: Kent R. Pendleton 2d Contracting Squadron

801 Kenney Ave, Suite 2301

Barksdale AFB LA 71110-2079

Phone: 318-456-3493

Fax: 318-456-3648

E-mail: kent.pendleton@us.af.mil

(b) The Contracting Officer (CO), is the only person authorized to approve changes or modify any of the requirements under this contract and notwithstanding any provisions contained elsewhere in this contract, the said authority remains solely in the CO. In the event the Contractor effects any such change at the direction of any person other than the CO, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in costs incurred as a result thereof.

FEDERAL HOLIDAYS/BASE CLOSURE

The following Federal Holidays are observed:

New Year’s Day

1 January

Birthday of Martin Luther King Jr.

Third Monday in January

President’s Day

Third Monday in February

Memorial Day

Last Monday in May

Independence Day

4 July

Labor Day

First Monday in September

Columbus Day

Second Monday in October

Veterans Day

11 November

Thanksgiving Day

Fourth Thursday in November

Christmas Day

25 December

BASE CLOSURE:

Contractors will not charge the Government for hours not incurred on the Government site and without oversight. In the event of a Declared Federal Holiday (i.e. day after Christmas), normal Federal Holidays, Down Days, inclement weather etc., in which no Government oversight is available and no written authorization has been approved by the Contracting Officer/Contracting Officer’s Representative (COR) prior to time of need, the contractor shall not charge the contract for hours not incurred. If the COR does authorize the contractor to work at an off-site location, this location shall be an approved corporate facility in which the supervisor/team lead shall be present to ensure all work being accomplished is directly attributable to this contract. In addition, the COR must submit, in writing, authorization for the contractor to work at their corporate off-site location to the Contracting Officer prior to the need. A home office is never an approved off-site work location. CORs shall allow contractors to adjust their schedules to compensate for missed times and have the option to work extended workdays, if desired.

CONTRACTOR ACCESS TO BARKSDALE

All commercial vehicles are required to enter Barksdale AFB through the East Gate, just off I-20 and Industrial Drive. This includes construction, food, supply, FedEX, and UPS deliveries, as well as contractors entering with company trucks. Contractors entering in their privately owned vehicles with an approved pass will be allowed entry at any gate. Hours of operation for the East Gate are 0500-2200 Monday through Friday, Saturday 0600-1200.

BASE ACCESS BACKGROUND CHECK

Security Forces will conduct a National Crime and Information Center (NCIC) background check on all contractor or subcontractor personnel prior to granting access to the installation.

BOSSIER CITY -- PARISH SALES AND USE TAX

Bossier City and Bossier Parish levy a use tax defined by state and local sales tax law. As such, these sales are taxable at the point of delivery to the "contractor" (consumer). If the sales or use tax is not collected by the vendor, tax is payable directly to the jurisdiction in which delivery is made. Contractors and subcontractors are each individually liable for sales and use tax on the basis of their individual purchase transactions. This tax may extend to equipment leased or rented to the Government. It may also extend to supplies and equipment purchased elsewhere, but brought into Bossier Parish for final use. All contractors are cautioned to assure themselves of any liability for this tax. The local telephone number for questions concerning this tax is A/C 318 741-8551.

WAGE DETERMINATION 15-2235

WD 15-2235 (Rev.-2) was first posted on www.wdol.gov on 01/05/2016

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-2235

Daniel W. Simms Division of | Revision No.: 2

Director Wage Determinations| Date Of Revision: 12/29/2015

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract

Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

States: Arkansas, Louisiana, Texas

Area: Arkansas Counties of Columbia, Hempstead, Howard, Lafayette, Little

River, Miller, Nevada, Sevier

Louisiana Parishes of Bienville, Bossier, Caddo, Claiborne, De Soto, East

Carroll, Jackson, Lincoln, Madison, Morehouse, Ouachita, Richland, Union, Webster, West Carroll

Texas Counties of Bowie, Gregg, Rusk, Upshur

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 12.65

01012 - Accounting Clerk II 14.20

01013 - Accounting Clerk III 15.88

01020 - Administrative Assistant 17.12

01035 - Court Reporter 19.24

01051 - Data Entry Operator I 11.42

01052 - Data Entry Operator II 12.46

01060 - Dispatcher, Motor Vehicle 15.65

01070 - Document Preparation Clerk 11.74

01090 - Duplicating Machine Operator 11.74

01111 - General Clerk I 9.82

01112 - General Clerk II 11.14

01113 - General Clerk III 12.38

01120 - Housing Referral Assistant 15.49

01141 - Messenger Courier 9.26

01191 - Order Clerk I 12.75

01192 - Order Clerk II 13.92

01261 - Personnel Assistant (Employment) I 13.66

01262 - Personnel Assistant (Employment) II 15.28

01263 - Personnel Assistant (Employment) III 17.04

01270 - Production Control Clerk 16.42

01290 - Rental Clerk 11.36

01300 - Scheduler, Maintenance 12.42

01311 - Secretary I 12.42

01312 - Secretary II 14.18

01313 - Secretary III 15.49

01320 - Service Order Dispatcher 13.13

01410 - Supply Technician 17.22

01420 - Survey Worker 13.89

01460 - Switchboard Operator/Receptionist 9.85

01531 - Travel Clerk I 11.80

01532 - Travel Clerk II 12.66

01533 - Travel Clerk III 13.29

01611 - Word Processor I 13.43

01612 - Word Processor II 15.15

01613 - Word Processor III 16.86

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 20.91

05010 - Automotive Electrician 19.87

05040 - Automotive Glass Installer 17.89

05070 - Automotive Worker 17.89

05110 - Mobile Equipment Servicer 16.31

05130 - Motor Equipment Metal Mechanic 20.91

05160 - Motor Equipment Metal Worker 17.89

05190 - Motor Vehicle Mechanic 20.91

05220 - Motor Vehicle Mechanic Helper 15.27

05250 - Motor Vehicle Upholstery Worker 17.57

05280 - Motor Vehicle Wrecker 17.89

05310 - Painter, Automotive 19.87

05340 - Radiator Repair Specialist 17.89

05370 - Tire Repairer 14.33

05400 - Transmission Repair Specialist 20.91

07000 - Food Preparation And Service Occupations

07010 - Baker 9.85

07041 - Cook I 8.18

07042 - Cook II 9.41

07070 - Dishwasher 7.25

07130 - Food Service Worker 7.50

07210 - Meat Cutter 13.63

07260 - Waiter/Waitress 7.36

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 18.06

09040 - Furniture Handler 11.41

09080 - Furniture Refinisher 18.06

09090 - Furniture Refinisher Helper 13.88

09110 - Furniture Repairer, Minor 15.97

09130 - Upholsterer 18.06

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 8.60

11060 - Elevator Operator 8.60

11090 - Gardener 13.09

11122 - Housekeeping Aide 8.66

11150 - Janitor 8.66

11210 - Laborer, Grounds Maintenance 9.97

11240 - Maid or Houseman 7.63

11260 - Pruner 8.83

11270 - Tractor Operator 12.18

11330 - Trail Maintenance Worker 9.97

11360 - Window Cleaner 9.34

12000 - Health Occupations

12010 - Ambulance Driver 14.54

12011 - Breath Alcohol Technician 14.75

12012 - Certified Occupational Therapist Assistant 22.72

12015 - Certified Physical Therapist Assistant 22.23

12020 - Dental Assistant 13.82

12025 - Dental Hygienist 31.06

12030 - EKG Technician 18.22

12035 - Electroneurodiagnostic Technologist 18.22

12040 - Emergency Medical Technician 14.54

12071 - Licensed Practical Nurse I 14.20

12072 - Licensed Practical Nurse II 15.89

12073 - Licensed Practical Nurse III 17.72

12100 - Medical Assistant 12.61

12130 - Medical Laboratory Technician 14.08

12160 - Medical Record Clerk 10.17

12190 - Medical Record Technician 14.89

12195 - Medical Transcriptionist 14.77

12210 - Nuclear Medicine Technologist 30.79

12221 - Nursing Assistant I 8.96

12222 - Nursing Assistant II 10.07

12223 - Nursing Assistant III 10.99

12224 - Nursing Assistant IV 12.34

12235 - Optical Dispenser 20.89

12236 - Optical Technician 15.07

12250 - Pharmacy Technician 12.67

12280 - Phlebotomist 12.34

12305 - Radiologic Technologist 20.88

12311 - Registered Nurse I 22.23

12312 - Registered Nurse II 27.62

12313 - Registered Nurse II, Specialist 27.62

12314 - Registered Nurse III 32.92

12315 - Registered Nurse III, Anesthetist 32.92

12316 - Registered Nurse IV 39.44

12317 - Scheduler (Drug and Alcohol Testing) 18.27

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 17.10

13012 - Exhibits Specialist II 21.88

13013 - Exhibits Specialist III 25.92

13041 - Illustrator I 17.10

13042 - Illustrator II 21.88

13043 - Illustrator III 25.92

13047 - Librarian 23.46

13050 - Library Aide/Clerk 11.33

13054 - Library Information Technology Systems 21.19

Administrator

13058 - Library Technician 13.32

13061 - Media Specialist I 15.29

13062 - Media Specialist II 17.10

13063 - Media Specialist III 19.07

13071 - Photographer I 14.79

13072 - Photographer II 16.54

13073 - Photographer III 20.92

13074 - Photographer IV 25.08

13075 - Photographer V 30.34

13110 - Video Teleconference Technician 15.49

14000 - Information Technology Occupations

14041 - Computer Operator I 13.95

14042 - Computer Operator II 15.11

14043 - Computer Operator III 19.08

14044 - Computer Operator IV 20.40

14045 - Computer Operator V 22.26

14071 - Computer Programmer I (see 1) 18.85

14072 - Computer Programmer II (see 1) 23.36

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1) 27.52

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 13.95

14160 - Personal Computer Support Technician 23.14

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 26.22

15020 - Aircrew Training Devices Instructor (Rated) 32.13

15030 - Air Crew Training Devices Instructor (Pilot) 38.52

15050 - Computer Based Training Specialist / Instructor 27.30

15060 - Educational Technologist 23.84

15070 - Flight Instructor (Pilot) 38.52

15080 - Graphic Artist 18.90

15090 - Technical Instructor 18.38

15095 - Technical Instructor/Course Developer 22.48

15110 - Test Proctor 14.83

15120 - Tutor 14.83

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 8.64

16030 - Counter Attendant 8.64

16040 - Dry Cleaner 10.16

16070 - Finisher, Flatwork, Machine 8.64

16090 - Presser, Hand 8.64

16110 - Presser, Machine, Drycleaning 8.64

16130 - Presser, Machine, Shirts 8.64

16160 - Presser, Machine, Wearing Apparel, Laundry 8.64

16190 - Sewing Machine Operator 10.77

16220 - Tailor 11.34

16250 - Washer, Machine 9.07

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 18.96

19040 - Tool And Die Maker 23.82

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 13.22

21030 - Material Coordinator 16.72

21040 - Material Expediter 16.72

21050 - Material Handling Laborer 11.80

21071 - Order Filler 11.15

21080 - Production Line Worker (Food Processing) 13.22

21110 - Shipping Packer 12.13

21130 - Shipping/Receiving Clerk 12.13

21140 - Store Worker I 10.82

21150 - Stock Clerk 15.32

21210 - Tools And Parts Attendant 13.22

21410 - Warehouse Specialist 13.22

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 24.13

23021 - Aircraft Mechanic I 22.95

23022 - Aircraft Mechanic II 24.13

23023 - Aircraft Mechanic III 25.35

23040 - Aircraft Mechanic Helper 16.56

23050 - Aircraft, Painter 20.57

23060 - Aircraft Servicer 19.06

23080 - Aircraft Worker 20.18

23110 - Appliance Mechanic 19.04

23120 - Bicycle Repairer 14.33

23125 - Cable Splicer 22.25

23130 - Carpenter, Maintenance 18.11

23140 - Carpet Layer 18.61

23160 - Electrician, Maintenance 22.08

23181 - Electronics Technician Maintenance I 21.43

23182 - Electronics Technician Maintenance II 22.72

23183 - Electronics Technician Maintenance III 24.65

23260 - Fabric Worker 15.97

23290 - Fire Alarm System Mechanic 19.17

23310 - Fire Extinguisher Repairer 14.84

23311 - Fuel Distribution System Mechanic 19.17

23312 - Fuel Distribution System Operator 17.06

23370 - General Maintenance Worker 17.08

23380 - Ground Support Equipment Mechanic 22.95

23381 - Ground Support Equipment Servicer 19.06

23382 - Ground Support Equipment Worker 20.18

23391 - Gunsmith I 14.84

23392 - Gunsmith II 17.08

23393 - Gunsmith III 19.17

23410 - Heating, Ventilation And Air-Conditioning 19.17

Mechanic

23411 - Heating, Ventilation And Air Contditioning 20.16

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 19.57

23440 - Heavy Equipment Operator 19.17

23460 - Instrument Mechanic 19.17

23465 - Laboratory/Shelter Mechanic 18.11

23470 - Laborer 10.11

23510 - Locksmith 18.11

23530 - Machinery Maintenance Mechanic 21.69

23550 - Machinist, Maintenance 19.17

23580 - Maintenance Trades Helper 15.27

23591 - Metrology Technician I 19.17

23592 - Metrology Technician II 20.16

23593 - Metrology Technician III 21.18

23640 - Millwright 19.17

23710 - Office Appliance Repairer 18.11

23760 - Painter, Maintenance 18.11

23790 - Pipefitter, Maintenance 22.64

23810 - Plumber, Maintenance 21.52

23820 - Pneudraulic Systems Mechanic 19.17

23850 - Rigger 19.17

23870 - Scale Mechanic 17.08

23890 - Sheet-Metal Worker, Maintenance 19.17

23910 - Small Engine Mechanic 17.08

23931 - Telecommunications Mechanic I 20.91

23932 - Telecommunications Mechanic II 21.97

23950 - Telephone Lineman 21.59

23960 - Welder, Combination, Maintenance 19.17

23965 - Well Driller 19.17

23970 - Woodcraft Worker 19.17

23980 - Woodworker 14.84

24000 - Personal Needs Occupations

24570 - Child Care Attendant 9.49

24580 - Child Care Center Clerk 13.02

24610 - Chore Aide 8.19

24620 - Family Readiness And Support Services 14.53

Coordinator

24630 - Homemaker 14.53

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 23.00

25040 - Sewage Plant Operator 19.87

25070 - Stationary Engineer 23.71

25190 - Ventilation Equipment Tender 15.69

25210 - Water Treatment Plant Operator 18.06

27000 - Protective Service Occupations

27004 - Alarm Monitor 14.88

27007 - Baggage Inspector 10.52

27008 - Corrections Officer 17.31

27010 - Court Security Officer 17.74

27030 - Detection Dog Handler 12.94

27040 - Detention Officer 17.31

27070 - Firefighter 18.39

27101 - Guard I 10.52

27102 - Guard II 12.94

27131 - Police Officer I 18.32

27132 - Police Officer II 20.36

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 10.96

28042 - Carnival Equipment Repairer 10.79

28043 - Carnival Worker 8.03

28210 - Gate Attendant/Gate Tender 13.13

28310 - Lifeguard 11.70

28350 - Park Attendant (Aide) 14.68

28510 - Recreation Aide/Health Facility Attendant 10.72

28515 - Recreation Specialist 17.55

28630 - Sports Official 11.70

28690 - Swimming Pool Operator 14.00

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 19.82

29020 - Hatch Tender 17.89

29030 - Line Handler 19.68

29041 - Stevedore I 18.59

29042 - Stevedore II 21.00

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16

30021 - Archeological Technician I 17.64

30022 - Archeological Technician II 19.73

30023 - Archeological Technician III 24.44

30030 - Cartographic Technician 24.44

30040 - Civil Engineering Technician 23.23

30061 - Drafter/CAD Operator I 17.64

30062 - Drafter/CAD Operator II 19.73

30063 - Drafter/CAD Operator III 22.00

30064 - Drafter/CAD Operator IV 27.08

30081 - Engineering Technician I 14.86

30082 - Engineering Technician II 19.06

30083 - Engineering Technician III 21.32

30084 - Engineering Technician IV 26.42

30085 - Engineering Technician V 32.32

30086 - Engineering Technician VI 38.24

30090 - Environmental Technician 23.24

30210 - Laboratory Technician 22.86

30240 - Mathematical Technician 24.44

30361 - Paralegal/Legal Assistant I 16.24

30362 - Paralegal/Legal Assistant II 20.12

30363 - Paralegal/Legal Assistant III 24.62

30364 - Paralegal/Legal Assistant IV 29.78

30390 - Photo-Optics Technician 24.44

30461 - Technical Writer I 24.44

30462 - Technical Writer II 31.19

30463 - Technical Writer III 37.52

30491 - Unexploded Ordnance (UXO) Technician I 22.74

30492 - Unexploded Ordnance (UXO) Technician II 27.51

30493 - Unexploded Ordnance (UXO) Technician III 32.97

30494 - Unexploded (UXO) Safety Escort 22.74

30495 - Unexploded (UXO) Sweep Personnel 22.74

30620 - Weather Observer, Combined Upper Air Or (see 2) 22.00

Surface Programs

30621 - Weather Observer, Senior (see 2) 24.44

31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide 11.23

31030 - Bus Driver 15.86

31043 - Driver Courier 12.78

31260 - Parking and Lot Attendant 8.01

31290 - Shuttle Bus Driver 13.16

31310 - Taxi Driver 9.90

31361 - Truckdriver, Light 13.16

31362 - Truckdriver, Medium 15.99

31363 - Truckdriver, Heavy 18.17

31364 - Truckdriver, Tractor-Trailer 18.17

99000 - Miscellaneous Occupations

99030 - Cashier 7.89

99050 - Desk Clerk 9.85

99095 - Embalmer 21.56

99251 - Laboratory Animal Caretaker I 9.26

99252 - Laboratory Animal Caretaker II 9.40

99310 - Mortician 21.56

99410 - Pest Controller 12.73

99510 - Photofinishing Worker 11.95

99710 - Recycling Laborer 12.46

99711 - Recycling Specialist 15.03

99730 - Refuse Collector 10.96

99810 - Sales Clerk 12.21

99820 - School Crossing Guard 10.86

99830 - Survey Party Chief 18.48

99831 - Surveying Aide 11.32

99832 - Surveying Technician 15.52

99840 - Vending Machine Attendant 12.31

99841 - Vending Machine Repairer 15.21

99842 - Vending Machine Repairer Helper 12.31

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther

King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE

Standard Form 1444 (SF-1444)

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed…