Questions_for_Under_Vehicle_Inspection_System.docx

Questions for Under Vehicle Inspection System

1. Please confirm the image here is the location where the permanent inground will be located, if not please advise where

0. Installed inside the Commercial Vehicle Inspection (CVI) facility (South Gate Tent)

1. What is the distance between the in-ground unit and the location where it will be monitored

1. Approximately 100 Feet or less

1. Is there an existing unit in place and this is a replacement or is this a new construction, if replacement please provide specifics and pictures

2. No

1. Where is the power to be drawn from for the inground and what is the distance away

3. 50 feet or less

1. Is 110VAC available at the location from where the power is to be drawn

4. Yes

1. Is there any existing conduit or pathways from the proposed inground location to the source of power, if yes please provide specifics

5. No

1. Is there any existing conduit or pathways from the proposed guard booth/monitoring location to the inground unit, if yes please provide specifics

6. No

1. Please confirm if the requirement is to read the front or rear license plate

7. Either will be sufficient

1. Will license plate readings be done on cars only or tractor trailers as well

8. Both

1. Please confirm a standard sunlight high definition monitor is acceptable

9. Yes image1.png