Attachment 2.a_DB Wage Det_Building_SHERIDAN COUNTY.doc

FA4528-08-R-0019

Attachment 2(a)

GENERAL DECISION: ND20080007 06/13/2008 ND7

Date: June 13, 2008

General Decision Number: ND20080007 06/13/2008

Superseded General Decision Number: ND20070007

State: North Dakota

Construction Type: Building

Counties: Benson, Cavalier, Eddy, Foster, Griggs, Nelson, Pembina, Pierce, Ramsey, Rolette, Sheridan, Steele, Towner, Traill, Walsh and Wells Counties in North Dakota.

BUILDING CONSTRUCTION PROJECTS (does not include residential construction consisting of single family homes and apartments up to and including 4 stories)

Modification Number Publication Date

0 02/08/2008

1 05/16/2008

2 05/23/2008

3 06/13/2008

BRND0001-001 05/01/2008

Rates Fringes

BRICKLAYER

BRICKLAYERS(All Counties except Pierce & Sheridan)...$ 26.79 7.11

BRND0002-001 05/01/2008

PIERCE and SHERIDAN COUNTIES

Rates Fringes

BRICKLAYER

BRICKLAYERS.................$ 24.48 8.39

* ENGI0049-035 04/28/2008

Rates Fringes

Power equipment operators:

BACKHOE (TRACK OR RUBBER)...$ 24.35 13.85

BACKHOE OPERATOR 3 AND 1/2

CU. YD. AND OVER............$ 24.95 13.85

CRANE OPERATOR 180' BOOM

OR JIB AND OVER, ANY

COMBINATION, ALL TYPES......$ 27.60 13.85

CRANE OPERATOR UP TO 180'

OF BOOM OR JIB, ANY

COMBINATION, ALL TYPES......$ 24.95 13.85

FRONT END LOADER............$ 24.35 13.85

IRON0793-002 02/26/2007

Rates Fringes

IRONWORKER, STRUCTURAL

(Excluding Metal Buildings)......$ 21.11 16.66

PLUM0300-010 05/01/2008

BENSON, CAVALIER, EDDY, FOSTER, GRIGGS, NELSON, PEMBINA,

PIERCE, RAMSEY, ROLETTE, SHERIDAN, STEELE, TOWNER, TRAILL,

WELLS & WALSH COUNTIES;

Rates Fringes

PLUMBER

PLUMBER(setting HVAC unit only).......................$ 23.36 8.00

SHEE0010-043 06/01/2005

PIERCE, SHERIDAN, ROLETTE, TOWER & WELLS COUNTIES:

Rates Fringes

Sheet Metal Worker

SHEET METAL (including

HVAC Duct)..................$ 17.11 8.98

SHEE0010-044 06/01/2005

BENSON, CAVALIER, EDDY, FOSTER, GRIGGS, NELSON, PEMBINA,

RAMSEY, STEELE, TRAILL & WALSH COUNTIES:

Rates Fringes

Sheet Metal Worker

SHEET METAL(including HVAC duct).......................$ 19.79 9.28

SUND2000-003 03/23/2000

Rates Fringes

CARPENTER

CARPENTER (including the installation of drywall, concrete forms, & cabinets, excluding the installation of heat and frost insulation, asbestos abatement, metal siding, acoustical ceiling, overhead doors and metal buildings)..................$ 11.20

CARPENTER (metal building erection)...................$ 12.56

CARPENTER (overhead doors only).......................$ 11.85

CEMENT MASON/CONCRETE FINISHER...$ 10.96

ELECTRICIAN

ELECTRICIAN (including low voltage wiring for telephones, computers, HVAC controls and alarms)...$ 14.48 3.95

Fire Sprinkler Fitter............$ 13.83 2.15

Heat and Frost Insulator.........$ 13.00 2.00

Laborers:

LABORER (excluding heat and frost insulation and asbestos abatement).........$ 8.41

PAINTER

PAINTER (excluding drywall finishing)..................$ 8.77

PIPEFITTER

PIPEFITTER (including HVAC piping).....................$ 14.03 1.63

PLUMBER

PLUMBER (excluding HVAC and fire sprinkler systems).$ 14.91 2.19

Power equipment operators:

Backhoe.....................$ 11.75

Grader......................$ 13.10 3.00

Loader......................$ 14.55

TRUCK DRIVER

Semi........................$ 12.65

Tandem......................$ 10.41

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses

(29CFR 5.5 (a) (1) (ii)).

In the listing above, the "SU" designation means that rates listed under the identifier do not reflect collectively bargained wage and fringe benefit rates. Other designations indicate unions whose rates have been determined to be prevailing.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the

Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the

Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator

(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative

Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION