Questions Answers.pdf

PDF 405 KB Posted

Attached to
Raised Speed Tables at GAFB
Solicitation number
FA303021R0001
Issued by

View the file

Other files

File Type Posted
Solicitation Amendment FA303021R00010001 SF 30.pdf PDF
Questions Answers 1.pdf PDF
Form 66.xlsx XLSX spreadsheet
Solicitation - FA303021R0001.pdf PDF
SOW.pdf PDF
Drawings.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

RFIs Answers:

1a. Yes. Crosswalks to match existing elevations.

b. No. Existing crosswalks vary in width.

c. Crosswalk 1 - New crosswalk will extend from C&G to C&G and spanned from new crosswalk to existing C&G\walkway by a galvanized steel grate.

See New Revised Detail 6, Sht. C-1 of 06 of drawings.

Crosswalk 2 – New crosswalk will extend from C&G to concrete apron to the south.

North end of new crosswalk will be spanned by galvanized steel grate from C&G to new crosswalk. See New Revised Detail 6, Sht. C-1 of 06 of drawings.

South end of new crosswalk will ramp down to existing sidewalk elevation.

d. The work sites are open access areas.

Contractors are encouraged to visit and verify specifics and details of the job sites.

Contractor would need to request GAFB access through the contracting office and officer.

2a. No. Only notched to accept galvanized grate. See New Revised Detail 6, Sht. C-1 of 06 of drawings.

b. See New Revised Detail 6, Sht. C-1 of 06 of drawings.

c. The work sites are open access areas.

Contractors are encouraged to visit and verify specifics and details of the job sites.

Contractor would need to request GAFB access through the contracting office and officer.

3a. No. Island and light pole are to remain. Offset walkway to the West of the island.

Begin 6’ ramp at end point of island on East side. West side ramp will run full length.

4a. Walkways are to be 10’ in width with 6’ ramps at each long side run.

5a. 12” of asphalt. See New Revised Detail 10, Sht. C-1 of 06 of drawings.

b. 8” wide x 6 ½” thk. See New Revised Detail 10, Sht. C-1 of 06 of drawings.

c. No. Only “HotMix”, “Hot Laid”, Type D asphalt.

6a. Comply with Statement of work. Also, comply with concrete specs and recommendations as to when to apply sealer.

b. Depending on concrete specs and recommendations. Concrete must have ample time to cure and reach strength. Also, asphalt, signage, markers, and site clean-up can be performed during this time.

7a. Existing water line is in green space of area. Not in roadways being worked.

Refer to sheet labeled “Water Line”.

File details come from the government source that posted it. Updated .