1 Solictation 11-R-0008.pdf

Project Title: Repair and Replace Roofs Miscellaneous Base Buildings, IDIQ

Location: IDIQ Repair and Replace Roofs at Eglin Air Force Base and buildings located w ithin the Eglin Air Force Base Reservation.

Period of Performance (PoP): From the date of aw ard through 365 days or one year plus four option years.

Block 11 below reflects the basic contract performance period and not the PoP for the issuance of the individual delivery orders w hich are negotiated.

Competition: This acquisition is 8(1) competitive and restricted to 8(a) certif ied f irms headquartered and/or have an approved bona f ide off ice in SBA's region IV as follow s: AL, FL, GA, KY, MS, NC, SC and TN.

NAICS Code: 238160, Size Standard $14 million. Please read and f ill out Section L & M to ensure compliance.

Magnitude: The magnitude of the acquisition is $1,000,000.00 to $5,000,000.00 per year.

NOTE: The Price Schedule quantities listed are for estimating purpose only.

Time Zone: Unless noted otherw ise the times listed are all Central Time zone.

CHRISTINE M YOUNG 850 882-0270

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

26-May-2011

(RFP)

(IFB)

X

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______5 calendar days and complete it w ithin ________365 calendar days after receiving aw ard, X notice to proceed. This performance period is X mandatory, negotiable. (See _________________________52.211-10

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the w ork required are due at the place specif ied in Item 8 by ___________ local time ______________11 Jul 2011 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee X is, is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______60 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

AAC/PKO - FA2823

308 WEST D AVENUE, SUITE 130 (BLDG 260)

EGLIN AFB FL 32542-5418

FA2823

PAGE OF PAGES

1 OF

CODE FA2823

(Title, identifying no., date):

12B. CALENDAR DAYS

04:00 PM (hour) Sealed envelopes containing offers

AAC/PKOA - CHRISTINE YOUNG

308 W. D AVE, BLDG 260, STE130

EGLIN AFB FL 32542-5418

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

FAX:TEL: TEL: 850-882-0270 FAX: 850-882-9442

FA2823-11-R-0008 129

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

FA2823-11-R-0008

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 12 Months Basic Year, Roofing IDIQ

FFP

Furnish all plant, labor, materials, and equipment, and perform all operations in connection with IDIQ Repair and Replace Roof, Eglin AFB FL in accordance with Specification No. 10BB, dated 06 JAN 2011. SEE SECTION "B"

(SUPPLIES OR SERVICE AND PRICES) FOR SCHEDULE (CLIN 0001

THROUGH CLIN 0182). PERFORMANCE PERIOD IS 365 DAYS FROM

DATE OF AWARD. Reference Specification Section 01 11 00, para 1.7 cost estimating software use of e4Clicks.

FOB: Destination

MAX

NET AMT

UNIT UNIT PRICE MAX AMOUNT

0002 12 Months OPTION Option Year One, Roofing IDIQ

FFP

Furnish all plant, labor, materials, and equipment, and perform all operations in connection with IDIQ Repair and Replace Roof, Eglin AFB FL in accordance with Specification No. 10BB, dated 06 JAN 2011. SEE SECTION "B"

(SUPPLIES OR SERVICE AND PRICES) FOR SCHEDULE (CLIN 1001

THROUGH CLIN 1182). PERFORMANCE PERIOD IS 365 DAYS FROM

THE MODIFICATION EFFECTIVE DATE OF OPTION YEAR ONE.

Reference Specification Section 01 11 00, para 1.7 cost estimating software use of e4Clicks.

UNIT UNIT PRICE MAX AMOUNT

0003 12 Months OPTION Option Year Two, Roofing IDIQ

FFP

Furnish all plant, labor, materials, and equipment, and perform all operations in connection with IDIQ Repair and Replace Roof, Eglin AFB FL in accordance with Specification No. 10BB, dated 06 JAN 2011. SEE SECTION "B"

(SUPPLIES OR SERVICE AND PRICES) FOR SCHEDULE (CLIN 2001

THROUGH CLIN 2182). PERFORMANCE PERIOD IS 365 DAYS FROM

THE MODIFICATION EFFECTIVE DATE OF OPTION YEAR TWO.

Reference Specification Section 01 11 00, para 1.7 cost estimating software use of

UNIT UNIT PRICE MAX AMOUNT

0004 12 Months OPTION Option Year Three, Roofing IDIQ

FFP

Furnish all plant, labor, materials, and equipment, and perform all operations in connection with IDIQ Repair and Replace Roof, Eglin AFB FL in accordance with Specification No. 10BB, dated 06 JAN 2011. SEE SECTION "B"

(SUPPLIES OR SERVICE AND PRICES) FOR SCHEDULE (CLIN 3001

THROUGH CLIN 3182). PERFORMANCE PERIOD IS 365 DAYS FROM

THE MODIFICATION EFFECTIVE DATE OF OPTION YEAR THREE.

Reference Specification Section 01 11 00, para 1.7 cost estimating software use of

ITEM NO

SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0005 12 Months OPTION Option Year Four, Roofing IDIQ

FFP

Furnish all plant, labor, materials, and equipment, and perform all operations in connection with IDIQ Repair and Replace Roof, Eglin AFB FL in accordance with Specification No. 10BB, dated 06 JAN 2011. SEE SECTION "B"

(SUPPLIES OR SERVICE AND PRICES) FOR SCHEDULE (CLIN 4001

THROUGH CLIN 4182). PERFORMANCE PERIOD IS 365 DAYS FROM

THE MODIFICATION EFFECTIVE DATE OF OPTION YEAR FOUR.

Reference Specification Section 01 11 00, para 1.7 cost estimating software use of

UNIT UNIT PRICE MAX AMOUNT

0006 6 Months OPTION Option to Extend, Roofing IDIQ

FFP

When exercised the prices for Option to Extend are the same as Option Year Four, in accordance with FAR clause 52.217-8 Option to Extend Services.

Furnish all plant, labor, materials, and equipment, and perform all operations in connection with IDIQ Repair and Replace Roof, Eglin AFB FL in accordance with Specification No. 10BB, dated 06 JAN 2011. SEE SECTION "B"

(SUPPLIES OR SERVICE AND PRICES) FOR SCHEDULE (CLIN 4001

THROUGH CLIN 4182). PERFORMANCE PERIOD IS A MAXIMUM OF 180

DAYS FROM THE APPLICABLE CONTRACT MODIFICATION EFFECTIVE

DATE FOR THE OPTION TO EXTEND. Reference Specification Section 01 11 00, para 1.7 cost estimating software use of e4Clicks.

BID SCHEDULE BASIC YR

Solicitation No. FA2823-11-R-0008 6-Jan-11

PRICE SCHEDULE

EGLIN AFB IDIQ ROOFING

2011-2012

Project No. FTFA 11-1007 Spec. No. 10BB

0.00

BASIC YEAR

LINE

ITEM

DESCRIPTION Unit EST.

QTY.

UNIT

PRICE

EST. TOTAL

PRICE

DIVISION2-SELECTIVE DEMOLITION

REMOVE AND REPLACE EXISTING WOOD BLOCKING,

NAILER, OR FRAMING, NOMINAL 2" THICK, 0-20 BF BF 200

REMOVE AND REPLACE EXISTING WOOD BLOCKING,

NAILER, OR FRAMING, NOMINAL 2" THICK, >20 BF BF 500

0003 REMOVE AND REPLACE WOOD DECKING BF 200

REMOVE AND REPLACE PLYWOOD ROOF

SHEATHING SF 500

REMOVE AND REPLACE EXISTING WOOD FASCIA

BOARDS, NOMINAL 1" THICK, 0-20 BF BF 100

REMOVE AND REPLACE EXISTING WOOD FASCIA

BOARDS, NOMINAL 1" THICK, >20 BF BF 400

REMOVE AND REPLACE EXISTING HARDBOARD

SOFFIT (3/8") SF 100

DIVISION 2-TEAR-OFFS

DEMOLITION, HAULING, AND DISPOSAL OF UP TO 5-

PLY BURS WITH FLASHINGS, GRAVEL, ETC. (DOES

NOT INCLUDE INSULATION) SQ 250

DEMOLITION, HAULING, AND DISPOSAL OF

INSULATION UP TO 3" THICK SQ 250

REMOVE AND DISPOSE OF EXISTING ROOF SHINGLE

SYSTEM AND UNDERLAYMENT, INCLUDING

FLASHING AND DRIP EDGES SQ 100

REMOVE AND DISPOSE OF EXISTING ROLL ROOFING

AND UNDERLAYMENT, INCLUDING FLASHING AND

DRIP EDGES SQ 100

DEMOLITION, REMOVAL, AND DISPOSAL OF

EXISTING METAL ROOFING SYSTEM SQ 200

DEMOLITION, HAULING, AND DISPOSAL OF

AGGREGATE BALLAST. INCLUDE SPUDDING BACK

AND VACUUMING LOOSE AGGREGATE FROM ENTIRE

ROOF SURFACE. SQ 200

DEMOLITION, HAULING, AND DISPOSAL OF

AGGREGATE BALLAST ON RESIDENTIAL UNITS AND

PREPARE SURFACE FOR ROLLED ROOFING SQ 200

REMOVE SINGLE PLY ROOFING (INCLUDING PVC,

EPDM, PIB, TPO AND OTHER MEMBRANE ROOFING)

DOWN TO THE DECK. INCLUDE MEMBRANE,

PENETRATION & WALL FLASHINGS AND MEMBRANE

FASTENERS. NOT TO INCLUDE INSULATION,

CRICKETS AND INSULATION FASTENERS.

SQ 50

DIVISION 2-ASBESTOS ABATEMENT

CLASS I AND/OR CLASS II ASBESTOS CONTAINING

ROOF MATERIALS (ACRM) ROOF MEMBRANE. SF 500

CEMENTITIOUS ASBESTOS FIBER ROOF DECK/FORM

BOARD SF 100

DIVISION 4-MASONRY

WATER BLAST CLEAN EXISTING MASONRY

SURFACE IN ACCOURDANCE WITH PAINT

MANUFACTURER'S RECOMMENDATIONS. SF 200

CONCRETE MASONRY UNITS TO INCLUDE

GROUTING, TUCK POINTING, FORMWORK, AND

SUPPORTS. PERFORM WORK IN ACCORDANCE

WITH MANUFACTURER'S RECOMMENDATIONS.

SF 30

DIVISION 5-STEEL ROOF DECK

REMOVE EXISTING STEEL ROOF DECK AND

REPLACE WITH NEW STEEL ROOF DECK SQ 50

DIVISION 5-METALS

COLD-FORMED METAL FRAMING

COLD-FORMED METAL FRAMING MEMBERS OR

SOFFIT FRAMING, TO INCLUDE SADDLES, CANT

STRIPS, CURBS FOR SCUTTLES AND VENTILATORS,

AND NAILERS ATTACHED AT THE TOPS OF

CONCRETE OR MASONRY CURBS, EXPANSION

JOINTS AND ROOF EDGES. FRAMING MEMBERS ARE

4" TO 8" WIDE BY 18 GAUGE OR THINNER. LF 100

RETROFIT SUB-PURLIN AND/OR FORMED SHAPED

FRAMING SYSTEM MECHANICALLY FASTENED TO

EXISTING AND/OR SUBSTRATE IN ACCORDANCE

WITH MANUFACTURES SPECIFICATIONS. MINIMUM

16 GAUGE THICKNESS LF 1000

METAL FABRICATION

SHOP PRIMED STEEL MATERIALS INCLUDING BUT

NOT LIMITED TO: PLATES, ANGLES, ANCHOR BOLTS,

STEEL PIPE SLEEVES, WEDGE TYPE INSERTS,

EXPANSION ANCHORS, FRAMING, SUPPORTS AND

FABRICATED ITEMS FOR APPLICATIONS THAT ARE

NOT SPECIFIED IN OTHER SPECIFICATION

SECTIONS. LB 50

PIPE AND TUBE RAILINGS

FABRICATE AND INSTALL A SIDE OR BASE MOUNT

ALUMINUM PIPE AND/OR TUBE GUARDRAIL SYSTEM LF 12

STAINLESS STEEL PIPE AND/OR TUBE GUARDRAIL

SYSTEM LF 12

FABRICATE AND INSTALL A SIDE OR BASE MOUNT

GALVANIZED STEEL PIPE AND/OR TUBE GUARDRAIL

SYSTEM LF 12

REMOVE AND DISPOSE OF AREAS OF

DETERIORATED OR DAMAGED PIPE AND/OR TUBE

GUARDRAIL SYSTEM LF 20

DIVISION 6-ROUGH CARPENTRY

FURNISH AND INSTALL PRESERVATIVE TREATED

WOOD ROOF NAILERS, WHICH INCLUDES WOOD

SADDLES OR CRICKETS, CANT STRIPS, CURBS FOR

SCUTTLES AND VENTILATORS, AND WOOD NAILERS

BOLTED TO TOPS OF CONCRETE OR MASONRY

CURBS AND AT EXPANSION JOINTS BF 50

REMOVE AND REPLACE 3/8", 5/8"OR 3/4" ROOF

SHEATHING OR SOFFIT ON RESIDENTIAL UNITS SF 500

REMOVE AND REPLACE ROOF DECKING FOR

RESIDENTIAL UNITS, WHICH INCLUDES 1x OR 2x

DECKING SF 200

FURNISH AND INSTALL ROOFING LUMBER FOR

RESIDENTIAL UNITS, WHICH INCLUDES RAFTERS,

STUDS, PLATES, CAPS, COLLAR BEAMS, SLEEPERS,

NAILING STRIPS, SILLS, HEADERS AND FASCIA BF 200

DIVISION 7-INSULATION

POLYISOCYANURATE BOARD INSULATION

0032 1" THICK, R6.5 SQ 100

0033 2" THICK, R13 SQ 100

0034 3" THICK, R19 SQ 100

0035 4" THICK, R30 SQ 2,000

PERLITE BOARD INSULATION, 3/4" THICK, R2.08

0036 <=100 SQ SQ 100

0037 > 100 SQ SQ 500

0038 BATT ROOF INSULATION, R-19 SF 1,000

0039 METAL ROOF INSULATION, R30 SQ 200

0040 FIBER CANTS LF 1,000

0041 WOOD CANTS LF 1,000

0042 TAPERED FILL INSULATION BOARD BF

10,00

0043 TAPERED 1/4" PER FOOT FOR DRAINAGE BF

10,00

DIVISION 7-SHINGLE ROOFING SYSTEMS

FURNISH AND INSTALL NEW MINERAL SURFACED

FIBERGLASS STRIP SHINGLE SYSTEM INCLUDING

UNDERLAYMENT SQ 300

FURNISH AND INSTALL NEW ARCHITECTURAL

DIMENSIONAL FIBERGLASS SHINGLE SYSTEM

INCLUDING UNDERLAYMENT SQ 100

REMOVE AND REPLACE EXISTING SHINGLES WITH

NEW FIBERGLASS STRIP SHINGLES TO MATCH

ADJACENT AREAS, PARTIAL REPAIRS SQ 10

ADD FOR STEEP ROOFS (7 TO 12 PITCH OR

GREATER) SQ 50

0048 FELT, GLASS FIBER, 15 POUND ORGANIC SQ 20

0049 FELT, GLASS FIBER, 30 POUND ORGANIC SQ 10

DIVISION 7-BITUMINOUS ROOFING (BURS)

0050 4-PLY BURS USING ASPHALT SQ 250

0051 4-PLY BURS USING COAL TAR SQ 20

0052 4-PLY BURS WITH SBS MODIFIED CAP SHEET SQ 2000

4-PLY BURS WITH SBS MODIFIED CAP SHEET WITH

ENERGY STAR RATED COATED SQ 1000

FOR RESIDENTIAL UNITS

SINGLE-PLY SBS MODIFIED CAP SHEET FOR

RESIDENTIAL UNITS SQ 250

0055 REMOVE AND REPLACE PITCH PAN EA 30

DIVISION 7-PARTIAL BURS REPAIRS

0056 REPAIRS BLISTERS SF 500

0057 REPAIR SPLITS LF 200

0058 REPAIR RIDGES LF 200

APPLY RESATURANT AND INSTALL NEW

AGGREGATE ON EXPOSED FELT AREAS SF 500

DIVISION 7-PREPARED ROLL ROOFING

FIBERGLASS PREPARED ROLL ROOFING INCLUDING

UNDERLAYMENT SQ 50

0061 CUT-OUT AND PATCH ROLL ROOFING SQ 5

DIVISION 7-POLYVINYL-CHLORIDE ROOFING

FURNISH/INSTALL FULLY ADHERED PVC SYSTEM- 48

MILS SQ 50

FURNISH/INSTALL FULLY ADHERED PVC SYSTEM- 72

MILS SQ 50

FURNISH/INSTALL MECHANICALLY FASTENED PVC

SYSTEM- 60MILS SQ 50

FURNISH/INSTALL MECHANICALLY FASTENED PVC

SYSTEM- 72 MIL SQ 50

PVC LAMINATED METAL FLASHING UP TO 18"

STRETCH OUT LF 100

PVC LAMINATED METAL FLASHING 18.1" TO 36"

STRETCH OUT LF 100

0068 PVC VENT BOOTS EA 5

0069 PVC UNIVERSAL CORNERS EA 50

0070 PATCH AND REPAIR PVC SYSTEM SF 5

DIVISION 7-THERMOPLASTIC POLYOLEFIN ROOFING

FURNISH/INSTALL FULLY ADHERED TPO SYSTEM- 45

MILS SQ 10

FURNISH/INSTALL FULLY ADHERED TPO SYSTEM- 60

MILS SQ 10

FURNISH/INSTALL MECHANICALLY FASTENED TPO

SYSTEM- 45MILS SQ 20

FURNISH/INSTALL MECHANICALLY FASTENED TPO

SYSTEM - 60 MIL SQ 2000

TPO LAMINATED METAL FLASHING UP TO 18"

STRETCH OUT LF 25

TPO LAMINATED METAL FLASHING 18.1" TO 36"

STRETCH OUT LF 25

0077 TPO VENT BOOTS EA 5

0078 TPO UNIVERSAL CORNERS EA 20

0079 PATCH AND REPAIR TPO SYSTEM SF 5

DIVISION 7-FLUID APPLIED WATERPROOFING

FLUID APPLIED COATING SYSTEM FOR METAL

ROOFS SQ 10

ENERGY STAR RATED COATING SYSTEM APPLIED

TO NEW BUR ROOFING WITH MODIFIED CAP SHEET SQ 50

0082 ELASTOMERIC COATING FOR ROOF REPAIRS SQ 10

DIVISION 7-TRAFFIC-BEARING ROOF DECK

SURFACING

0083 TRAFFIC-BEARING ROOF DECK SURFACING SYSTEM SQ 10

DIVISION 7-SHEET METAL WORK, GENERAL

FURNISH AND INSTALL NEW GRAVEL GUARD/FASCIA

(FACE DIMENSION)

0084 GALVANIZED METAL, 4"- 5" LF 500

0085 GALVANIZED METAL, 6" - 7" LF 100

0086 ALUMINUM, 4" - 5" LF 500

0087 ALUMINUM, 6" - 7" LF 100

0088 COPPER, 4" - 5" LF 25

0089 COPPER, 6" -7" LF 25

0090 2-PIECE GALVANIZED METAL, 7" - 10" LF 50

0091 2-PIECE GALVANIZED METAL, 10" - 12" LF 50

0092 2-PIECE ALUMINUM, 7" - 10" LF 50

0093 2-PIECE ALUMINUM, 10" - 12" LF 50

0094 2-PIECE COPPER, 7" - 10" LF 50

0095 2-PIECE COPPER, 10" - 12" LF 50

FURNISH AND INSTALL:

0096 GALVANIZED METAL DRIP EDGE LF 200

0097 GALVANIZED METAL COUNTERFLASHING SF 100

0098 GALVANIZED METAL VALLEY FLASHING SF 100

0099 GALVANIZED METAL STEP FLASHING SF 100

0100 GALVANIZED METAL BASE FLASHING SF 100

0101 GALVANIZED METAL FLASHING- FLAT SHEET SF 100

0102 GALVANIZED METAL CAP FLASHING SF 100

0103 ALUMINUM DRIP EDGE LF 200

0104 ALUMINUM COUNTERFLASHING SF 100

0105 ALUMINUM VALLEY FLASHING SF 100

0106 ALUMINUM STEP FLASHING SF 100

0107 ALUMINUM BASE FLASHING SF 100

0108 ALUMINUM FLASHING - FLAT SHEET SF 100

0109 ALUMINUM CAP FLASHING SF 100

0110 METAL RIDGE VENT LF 100

REMOVE EXISTING EXPANSION JOINT AND INSTALL

NEW EXPANSION JOINT:

0111 ELASTOMERIC TYPE (NEOPRENE BELLOWS) LF 100

0112 ALUMINUM CAPPED CURB LF 100

0113 GALVANIZED CAPPED CURB LF 100

0114 REMOVE AND REPLACE VENTILATOR, ROOFTOP EA 1

0115 REMOVE AND REPLACE VENTILATOR, RIDGE LF 40

0116 REMOVE AND REPLACE VENTILATOR, GABLE EA 2

REMOVE AND REPLACE CURB ASSEMBLY, METAL

WITH CRICKET, FACTORY FABRICATED AND

FINISHED EA 2

0118 REMOVE AND REPLACE ROOF SCUTTLE EA 1

DIVISION 7-METAL WALL PANELS

0119 FURNISH AND INSTALL STEEL WALL PANELS SF 100

DIVISION 7-GUTTERS AND DOWNSPOUTS

0120 REMOVE EXISTING GUTTER AND DOWNSPOUTS LF 100

FURNISH AND INSTALL NEW GUTTER, BOX,

INCLUDING HANGARS, BRACKETS, SEALANTS, ETC.

0121 24 GA. GALVANIZED/PRIMED, 4" X 5" LF 500

0122 24 GA. GALVANIZED/PRIMED, 5" X 7" LF 500

0123 ALUMINUM, 4" X 5" LF 100

0124 ALUMINUM, 5" X 7" LF 100

0125 16 OZ. COPPER, 4" X 5" LF 50

0126 16 OZ. COPPER, 5" X 7" LF 50

FURNISH & INSTALL NEW DOWNSPOUTS, INCLUDES

BRACKETS, ETC.

0127 24 GA. GALVANIZED/PRIMED, 3" X 4" LF 500

0128 ALUMINUM, 3" X 4" LF 100

0129 16 OZ. COPPER, 3" X 4" LF 100

FURNISH & INSTALL NEW PRE-FORMED CONCRETE

SPLASHBLOCKS EA 20

DIVISION 7-MANUFACTURED ROOF FRAMING

SYSTEM

RETROFIT ROOFING & STRUCTURAL-UP TO 6/12

SLOPE <= 100 SQ SQ 150

SLOPE =>100 SQ SQ 150

DIVISION 7-STANDING SEAM METAL ROOF SYSTEM

NEW STANDING SEAM METAL ROOF SYSTEM,

STRUCTURAL<=100SQ SQ 150

NEW STANDING SEAM METAL ROOF SYSTEM,

STRUCTURAL, >100SQ SQ 6085

NEW HIGH PERFORMANCE STANDING SEAM METAL

ROOF SYSTEM, STRUCTURAL, WITH INSPECTIONS

AND WARRANTY PER SPEC NO. 07 41 20 SQ 150

NEW STANDING SEAM METAL ROOF SYSTEM,

ARCHITECTURAL SQ 150

0137 FASCIA PANEL SYSTEM SF 1,000

0138 NON-PERFORATED SOFFIT PANEL SF 500

0139 PERFORATED SOFFIT PANEL SF 500

DIVISION 7-CAULKING AND SEALANTS

0140 REMOVE EXISTING CAULKING, CLEAN JOINT LF 150

0141 SILICONE CAULKING/SEALANT LF 150

CAULKING, MISCELLANEOUS APPLICATION

(SONNEBORN, SONOLASTIC NP-1, OR APPROVED

EQUAL) LF 150

DIVISION 9-PAINTING

0143 PAINT, BASE SCHEME, EXT. LATEX, 1 COAT SF 1,000

PAINT, BASE SCHEME, EXT. LATEX, PRIMER AND 2

COATS SF 1,000

DIVISION 15-ROOF DRAINS

REFLASH EXISTING ROOF DRAIN, INCLUDES NEW

LEAD FLASHING, CLAMPING RING, AND CAST IRON

DOME STRAINER EA 5

REMOVE AND REPLACE EXISTING ROOF DRAIN,

INCLUDES NEW CAST IRON DOME STRAINER EA 20

DIVISION 16-LIGHTING PROTECTION

REMOVE EXISTING LIGHTNING PROTECTION

SYSTEM AND REINSTALL EXISTING LIGHTNING

PROTECTION SYSTEM WITH NEW FASTENERS

0147 REMOVE AND REINSTALL EXISTING CONDUCTOR LF 250

REMOVE AND INSTALL NEW FASTENERS,

INCLUDING LOOPS AND CLIPS EA 25

SYSTEM AND INSTALL NEW LIGHTNING

PROTECTION SYSTEM

AIR TERMINALS, INCLUDES COPPER BASE FOR NON-

METAL ROOFS EA 20

AIR TERMINALS, INCLUDES ALUMINUM BASE FOR

METAL ROOFS EA 20

0151 CONDUCTORS LF 300

0152 FASTENERS, INCLUDES LOOPS AND CLIPS EA 100

0153 CONNECTORS EA 20

0154 COUNTERPOISE CONDUCTOR LF 1000

0155 GROUNDING RODS, 3/4" DIAMETER x 60' LONG EA 10

0156 SURGE PROTECTION EA 1

FURNISH AND INSTALL GROUND ACCESS PVC TEST

WELL, 12" I.D. X 24" LONG WITH 1/4" GALVANIZED

FRICTION FIT COVER WITH THE WORD "GROUND"

ENGREAVED ON TOP OF THE COVER EA 10

0158 UL SITE INSPECTION EA 1

MISCELLANEOUS ROOFING ITEMS

0159 EXTEND PLUMBING VENTS LF 40

0160 FLEXIBLE VENT PIPE FLASHING (METAL ROOFS) EA 30

REMOVE AND REPLACE LEAD FLASHING AT VENT

THRU ROOF (VTR) EA 40

REMOVE EXISTING VTR PENETRATION FLASHING

AND REPLACE WITH COLLAR TYPE FLASHING EA 20

REPAIR AND REPLACE SPALLS, HOLES, AND

CRACKS IN EXISTING CONCRETE ROOF DECK SF 50

FURNISH AND INSTALL VAPOR BARRIER OVER

CONCRETE DECKS SQ 50

FURNISH AND INSTALL ROSIN PAPER OVER WOOD

DECKS SQ 50

DISCONNECT AND RECONNECT ELECTRICAL

SERVICE (<200 AMP) EA 1

REMOVE EXISTING CONDUIT, ETC. AND REPLACE

WITH NEW 3/4" RIGID CONDUIT, INCLUDING WIRE,

BOXES, FITTINGS, ETC. LF 10

0168 ROLL COIL RIDGE VENT LF 10

0169 60MIL WATERPROOF UNDERLAYMENT LF 150

0170 SPUD EXISTING ROOF TO INSULATION SF 10

0171 CUT AND PATCH CONCRETE LF 1000

0172 TRENCH AND BACKFILL LF 1000

0173 12"x30" CONCRETE SPLASH BLOCKS EA 1

0174 TESTING (CORE CUT) OF ROOFS-REPAIR TEST AREA EA 1

0175 THERMAL IMAGING SURVEY OF ROOF SF 1

0176 AS-BUILT DRAWING PER SPEC. NO. 01 11 00 EA 1

0177 ENGINEERING RATE STRUCTURAL HR 1

0178 MECHANICAL SUBCONTRACTOR HR 1

0179 ELECTRICAL SUBCONTRACTOR HR 1

0180 LABOR RATE - MISCELLANEOUS WORK MH 1

SPECIAL CONDITIONS AND CIRCUMSTANCES

HEIGHT FACTOR, 30 FEET OR GREATER ABOVE

GROUND, UNIT EACH=JOB EA 2

Subtotal

MODIFIERS

MULTIPLIER OF A NOT TO EXCEED 35% TO BE

ADDED TO TOTAL FOR URGENT DELIVERY ORDER

(UDO) -TEMPORARY DRY-IN WORK ONLY %

BASE YEAR TOTAL

BID SCHEDULE OPT YR ONE

PRICE SCHEDULE

EGLIN AFB IDIQ ROOFING

2012-2013

OPTION YEAR ONE

ITE

M

DESCRIPTION Unit EST.

QTY.

UNIT

PRICE

EST.

TOTAL

REMOVE AND REPLACE EXISTING WOOD

BLOCKING, NAILER, OR FRAMING, NOMINAL 2"

THICK, 0-20 BF BF 200

REMOVE AND REPLACE EXISTING WOOD

BLOCKING, NAILER, OR FRAMING, NOMINAL 2"

THICK, >20 BF BF 500

1003 REMOVE AND REPLACE WOOD DECKING BF 200

REMOVE AND REPLACE PLYWOOD ROOF

SHEATHING SF 500

REMOVE AND REPLACE EXISTING WOOD FASCIA

BOARDS, NOMINAL 1" THICK, 0-20 BF BF 100

REMOVE AND REPLACE EXISTING WOOD FASCIA

BOARDS, NOMINAL 1" THICK, >20 BF BF 400

DEMOLITION, HAULING, AND DISPOSAL OF UP TO

5-PLY BURS WITH FLASHINGS, GRAVEL, ETC.

(DOES NOT INCLUDE INSULATION) SQ 250

DEMOLITION, HAULING, AND DISPOSAL OF

INSULATION UP TO 3" THICK SQ 250

REMOVE AND DISPOSE OF EXISTING ROOF

SHINGLE SYSTEM AND UNDERLAYMENT,

INCLUDING FLASHING AND DRIP EDGES SQ 100

REMOVE AND DISPOSE OF EXISTING ROLL

ROOFING AND UNDERLAYMENT, INCLUDING

FLASHING AND DRIP EDGES SQ 100

DEMOLITION, REMOVAL, AND DISPOSAL OF

EXISTING METAL ROOFING SYSTEM SQ 200

DEMOLITION, HAULING, AND DISPOSAL OF

AGGREGATE BALLAST. INCLUDE SPUDDING BACK

AND VACUUMING LOOSE AGGREGATE FROM

ENTIRE ROOF SURFACE. SQ 200

AGGREGATE BALLAST ON RESIDENTIAL UNITS

AND PREPARE SURFACE FOR ROLLED ROOFING SQ 200

REMOVE SINGLE PLY ROOFING (INCLUDING PVC,

EPDM, PIB, TPO AND OTHER MEMBRANE

ROOFING) DOWN TO THE DECK. INCLUDE

MEMBRANE, PENETRATION & WALL FLASHINGS

AND MEMBRANE FASTENERS. NOT TO INCLUDE

INSULATION, CRICKETS AND INSULATION

FASTENERS. SQ 50

ROOF MATERIALS (ACRM) ROOF MEMBRANE. SF 500

CEMENTITIOUS ASBESTOS FIBER ROOF

DECK/FORM BOARD SF 100

SURFACE IN ACCOURDANCE WITH PAINT

MANUFACTURER'S RECOMMENDATIONS. SF 200

CONCRETE MASONRY UNITS TO INCLUDE

GROUTING, TUCK POINTING, FORMWORK, AND

SUPPORTS. PERFORM WORK IN ACCORDANCE

SOFFIT FRAMING, TO INCLUDE SADDLES, CANT

STRIPS, CURBS FOR SCUTTLES AND

VENTILATORS, AND NAILERS ATTACHED AT THE

TOPS OF CONCRETE OR MASONRY CURBS,

EXPANSION JOINTS AND ROOF EDGES. FRAMING

MEMBERS ARE 4" TO 8" WIDE BY 18 GAUGE OR

THINNER. LF 100

RETROFIT SUB-PURLIN AND/OR FORMED SHAPED

FRAMING SYSTEM MECHANICALLY FASTENED TO

EXISTING AND/OR SUBSTRATE IN ACCORDANCE

WITH MANUFACTURES SPECIFICATIONS. MINIMUM

16 GAUGE THICKNESS LF 1000

METAL FABRICATION

SHOP PRIMED STEEL MATERIALS INCLUDING BUT

NOT LIMITED TO: PLATES, ANGLES, ANCHOR

BOLTS, STEEL PIPE SLEEVES, WEDGE TYPE

INSERTS, EXPANSION ANCHORS, FRAMING,

SUPPORTS AND FABRICATED ITEMS FOR

APPLICATIONS THAT ARE NOT SPECIFIED IN

OTHER SPECIFICATION SECTIONS. LB 50

PIPE AND TUBE RAILINGS

ALUMINUM PIPE AND/OR TUBE GUARDRAIL LF 12

FABRICATE AND INSTALL A SIDE OR BASE MOUNT

STAINLESS STEEL PIPE AND/OR TUBE GUARDRAIL

SYSTEM LF 12

FABRICATE AND INSTALL A SIDE OR BASE MOUNT

GALVANIZED STEEL PIPE AND/OR TUBE

GUARDRAIL SYSTEM LF 12

REMOVE AND DISPOSE OF AREAS OF

WOOD ROOF NAILERS, WHICH INCLUDES WOOD

SADDLES OR CRICKETS, CANT STRIPS, CURBS

FOR SCUTTLES AND VENTILATORS, AND WOOD

NAILERS BOLTED TO TOPS OF CONCRETE OR

MASONRY CURBS AND AT EXPANSION JOINTS BF 50

REMOVE AND REPLACE 3/8", 5/8"OR 3/4" ROOF

SHEATHING OR SOFFIT ON RESIDENTIAL UNITS SF 500

REMOVE AND REPLACE ROOF DECKING FOR

RESIDENTIAL UNITS, WHICH INCLUDES 1x OR 2x

DECKING SF 200

FURNISH AND INSTALL ROOFING LUMBER FOR

RESIDENTIAL UNITS, WHICH INCLUDES RAFTERS,

STUDS, PLATES, CAPS, COLLAR BEAMS,

SLEEPERS, NAILING STRIPS, SILLS, HEADERS AND

FASCIA BF 200

1032 1" THICK, R6.5 SQ 100

1033 2" THICK, R13 SQ 100

1034 3" THICK, R19 SQ 100

1035 4" THICK, R30 SQ 2000

1036 <=100 SQ SQ 100

1037 > 100 SQ SQ 500

1038 BATT ROOF INSULATION, R-19 SF 1000

1039 METAL ROOF INSULATION, R30 SQ 200

1040 FIBER CANTS LF 1000

1041 WOOD CANTS LF 1000

1042 TAPERED FILL INSULATION BOARD BF 10000

1043 TAPERED 1/4" PER FOOT FOR DRAINAGE BF 10000

DIMENSIONAL FIBERGLASS SHINGLE SYSTEM

INCLUDING UNDERLAYMENT SQ 100

REMOVE AND REPLACE EXISTING SHINGLES WITH

NEW FIBERGLASS STRIP SHINGLES TO MATCH

ADJACENT AREAS, PARTIAL REPAIRS SQ 10

ADD FOR STEEP ROOFS (7 TO 12 PITCH OR

GREATER) SQ 50

1048 FELT, GLASS FIBER, 15 POUND ORGANIC SQ 20

1049 FELT, GLASS FIBER, 30 POUND ORGANIC SQ 10

1050 4-PLY BURS USING ASPHALT SQ 250

1051 4-PLY BURS USING COAL TAR SQ 20

1052 4-PLY BURS WITH SBS MODIFIED CAP SHEET SQ 2000

1055 REMOVE AND REPLACE PITCH PAN EA 30

1056 REPAIRS BLISTERS SF 500

1057 REPAIR SPLITS LF 200

1058 REPAIR RIDGES LF 200

FIBERGLASS PREPARED ROLL ROOFING

INCLUDING UNDERLAYMENT SQ 50

1061 CUT-OUT AND PATCH ROLL ROOFING SQ 5

FURNISH/INSTALL FULLY ADHERED PVC SYSTEM-

48 MILS SQ 50

FURNISH/INSTALL FULLY ADHERED PVC SYSTEM-

72 MILS SQ 50

FURNISH/INSTALL MECHANICALLY FASTENED PVC

SYSTEM- 60MILS SQ 50

FURNISH/INSTALL MECHANICALLY FASTENED PVC

SYSTEM- 72 MIL SQ 50

PVC LAMINATED METAL FLASHING UP TO 18"

STRETCH OUT LF 100

PVC LAMINATED METAL FLASHING 18.1" TO 36"

STRETCH OUT LF 100

1068 PVC VENT BOOTS EA 5

1069 PVC UNIVERSAL CORNERS EA 50

1070 PATCH AND REPAIR PVC SYSTEM SF 5

DIVISION 7-THERMOPLASTIC POLYOLEFIN

ROOFING

FURNISH/INSTALL FULLY ADHERED TPO SYSTEM-

45 MILS SQ 10

FURNISH/INSTALL FULLY ADHERED TPO SYSTEM-

60 MILS SQ 10

FURNISH/INSTALL MECHANICALLY FASTENED TPO

SYSTEM- 45MILS SQ 20

FURNISH/INSTALL MECHANICALLY FASTENED TPO

SYSTEM - 60 MIL SQ 2000

TPO LAMINATED METAL FLASHING UP TO 18"

STRETCH OUT LF 25

TPO LAMINATED METAL FLASHING 18.1" TO 36"

STRETCH OUT LF 25

1077 TPO VENT BOOTS EA 5

1078 TPO UNIVERSAL CORNERS EA 20

1079 PATCH AND REPAIR TPO SYSTEM SF 5

ROOFS SQ 10

ENERGY STAR RATED COATING SYSTEM APPLIED

TO NEW BUR ROOFING WITH MODIFIED CAP

SHEET SQ 50

1082 ELASTOMERIC COATING FOR ROOF REPAIRS SQ 10

TRAFFIC-BEARING ROOF DECK SURFACING

SYSTEM SQ 10

FURNISH AND INSTALL NEW GRAVEL

GUARD/FASCIA (FACE DIMENSION)

1084 GALVANIZED METAL, 4"- 5" LF 500

1085 GALVANIZED METAL, 6" - 7" LF 100

1086 ALUMINUM, 4" - 5" LF 500

1087 ALUMINUM, 6" - 7" LF 100

1088 COPPER, 4" - 5" LF 25

1089 COPPER, 6" -7" LF 25

1090 2-PIECE GALVANIZED METAL, 7" - 10" LF 50

1091 2-PIECE GALVANIZED METAL, 10" - 12" LF 50

1092 2-PIECE ALUMINUM, 7" - 10" LF 50

1093 2-PIECE ALUMINUM, 10" - 12" LF 50

1094 2-PIECE COPPER, 7" - 10" LF 50

1095 2-PIECE COPPER, 10" - 12" LF 50

FURNISH AND INSTALL:

1096 GALVANIZED METAL DRIP EDGE LF 200

1097 GALVANIZED METAL COUNTERFLASHING SF 100

1098 GALVANIZED METAL VALLEY FLASHING SF 100

1099 GALVANIZED METAL STEP FLASHING SF 100

1100 GALVANIZED METAL BASE FLASHING SF 100

1101 GALVANIZED METAL FLASHING- FLAT SHEET SF 100

1102 GALVANIZED METAL CAP FLASHING SF 100

1103 ALUMINUM DRIP EDGE LF 200

1104 ALUMINUM COUNTERFLASHING SF 100

1105 ALUMINUM VALLEY FLASHING SF 100

1106 ALUMINUM STEP FLASHING SF 100

1107 ALUMINUM BASE FLASHING SF 100

1108 ALUMINUM FLASHING - FLAT SHEET SF 100

1109 ALUMINUM CAP FLASHING SF 100

1110 METAL RIDGE VENT LF 100

REMOVE EXISTING EXPANSION JOINT AND

INSTALL NEW EXPANSION JOINT:

1111 ELASTOMERIC TYPE (NEOPRENE BELLOWS) LF 100

1112 ALUMINUM CAPPED CURB LF 100

1113 GALVANIZED CAPPED CURB LF 100

1114 REMOVE AND REPLACE VENTILATOR, ROOFTOP EA 1

1115 REMOVE AND REPLACE VENTILATOR, RIDGE LF 40

1116 REMOVE AND REPLACE VENTILATOR, GABLE EA 2

REMOVE AND REPLACE CURB ASSEMBLY, METAL

WITH CRICKET, FACTORY FABRICATED AND

1118 REMOVE AND REPLACE ROOF SCUTTLE EA 1

1119 FURNISH AND INSTALL STEEL WALL PANELS SF 100

1120 REMOVE EXISTING GUTTER AND DOWNSPOUTS LF 100

INCLUDING HANGARS, BRACKETS, SEALANTS,

ETC.

1121 24 GA. GALVANIZED/PRIMED, 4" X 5" LF 500

1122 24 GA. GALVANIZED/PRIMED, 5" X 7" LF 500

1123 ALUMINUM, 4" X 5" LF 100

1124 ALUMINUM, 5" X 7" LF 100

1125 16 OZ. COPPER, 4" X 5" LF 50

1126 16 OZ. COPPER, 5" X 7" LF 50

FURNISH & INSTALL NEW DOWNSPOUTS,

INCLUDES BRACKETS, ETC.

1127 24 GA. GALVANIZED/PRIMED, 3" X 4" LF 500

1128 ALUMINUM, 3" X 4" LF 100

1129 16 OZ. COPPER, 3" X 4" LF 100

FURNISH & INSTALL NEW PRE-FORMED

CONCRETE SPLASHBLOCKS EA 20

SLOPE <= 100 SQ SQ 150

DIVISION 7-STANDING SEAM METAL ROOF

STRUCTURAL<=100SQ SQ 150

NEW STANDING SEAM METAL ROOF SYSTEM,

STRUCTURAL, >100SQ SQ 5575

NEW HIGH PERFORMANCE STANDING SEAM

METAL ROOF SYSTEM, STRUCTURAL, WITH

INSPECTIONS AND WARRANTY PER SPEC NO. 07

41 20 SQ 150

NEW STANDING SEAM METAL ROOF SYSTEM,

ARCHITECTURAL SQ 150

1137 FASCIA PANEL SYSTEM SF 1000

1138 NON-PERFORATED SOFFIT PANEL SF 500

1139 PERFORATED SOFFIT PANEL SF 500

1140 REMOVE EXISTING CAULKING, CLEAN JOINT LF 150

1141 SILICONE CAULKING/SEALANT LF 150

CAULKING, MISCELLANEOUS APPLICATION

1143 PAINT, BASE SCHEME, EXT. LATEX, 1 COAT LF 1000

COATS LF 1000

LEAD FLASHING, CLAMPING RING, AND CAST IRON

DOME STRAINER EA 5

1147 REMOVE AND REINSTALL EXISTING CONDUCTOR LF 250

PROTECTION SYSTEM

AIR TERMINALS, INCLUDES COPPER BASE FOR

NON-METAL ROOFS EA 20

AIR TERMINALS, INCLUDES ALUMINUM BASE FOR

METAL ROOFS EA 20

1151 CONDUCTORS LF 300

1152 FASTENERS, INCLUDES LOOPS AND CLIPS EA 100

1153 CONNECTORS EA 20

1154 COUNTERPOISE CONDUCTOR LF 1000

1155 GROUNDING RODS, 3/4" DIAMETER x 60' LONG EA 10

1156 SURGE PROTECTION EA 1

FURNISH AND INSTALL GROUND ACCESS PVC

TEST WELL, 12" I.D. X 24" LONG WITH 1/4"

GALVANIZED FRICTION FIT COVER WITH THE

WORD "GROUND" ENGREAVED ON TOP OF THE

COVER EA 10

1158 UL SITE INSPECTION EA 1

1159 EXTEND PLUMBING VENTS LF 40

1160 FLEXIBLE VENT PIPE FLASHING (METAL ROOFS) EA 30

REMOVE AND REPLACE LEAD FLASHING AT VENT

THRU ROOF (VTR) EA 40

REMOVE EXISTING VTR PENETRATION FLASHING

AND REPLACE WITH COLLAR TYPE FLASHING EA 20

REPAIR AND REPLACE SPALLS, HOLES, AND

CRACKS IN EXISTING CONCRETE ROOF DECK SF 50

FURNISH AND INSTALL VAPOR BARRIER OVER

CONCRETE DECKS SQ 50

FURNISH AND INSTALL ROSIN PAPER OVER WOOD

DECKS SQ 50

DISCONNECT AND RECONNECT ELECTRICAL

SERVICE (<200 AMP) EA 1

REMOVE EXISTING CONDUIT, ETC. AND REPLACE

WITH NEW 3/4" RIGID CONDUIT, INCLUDING WIRE,

BOXES, FITTINGS, ETC. LF 10

1168 ROLL COIL RIDGE VENT LF 10

1169 60MIL WATERPROOF UNDERLAYMENT LF 150

1170 SPUD EXISTING ROOF TO INSULATION SF 10

1171 CUT AND PATCH CONCRETE LF 1000

1172 TRENCH AND BACKFILL LF 1000

1173 12"x30" CONCRETE SPLASH BLOCKS EA 1

TESTING (CORE CUT) OF ROOFS-REPAIR TEST

AREA EA 1

1175 THERMAL IMAGING SURVEY OF ROOF SF 1

1176 AS-BUILT DRAWING PER SPEC. NO. 01 11 00 EA 1

1177 ENGINEERING RATE STRUCTURAL HR 1

1178 MECHANICAL SUBCONTRACTOR HR 1

1179 ELECTRICAL SUBCONTRACTOR HR 1

1180 LABOR RATE - MISCELLANEOUS WORK MH 1

OPTION YEAR ONE TOTAL

BID SCHEDULE OPT YR TWO

PRICE SCHEDULE

EGLIN AFB IDIQ ROOFING

2013-2014

OPTION YEAR TWO

ITE

M

DESCRIPTION Unit EST.

QTY.

UNIT

PRICE

REMOVE AND REPLACE EXISTING WOOD

BLOCKING, NAILER, OR FRAMING, NOMINAL 2"

THICK, 0-20 BF BF 200

REMOVE AND REPLACE EXISTING WOOD

BLOCKING, NAILER, OR FRAMING, NOMINAL 2"

THICK, >20 BF BF 500

2003 REMOVE AND REPLACE WOOD DECKING BF 200

REMOVE AND REPLACE PLYWOOD ROOF

SHEATHING SF 500

REMOVE AND REPLACE EXISTING WOOD FASCIA

BOARDS, NOMINAL 1" THICK, 0-20 BF BF 100

REMOVE AND REPLACE EXISTING WOOD FASCIA

BOARDS, NOMINAL 1" THICK, >20 BF BF 400

DEMOLITION, HAULING, AND DISPOSAL OF UP TO

5-PLY BURS WITH FLASHINGS, GRAVEL, ETC.

(DOES NOT INCLUDE INSULATION) SQ 250

DEMOLITION, HAULING, AND DISPOSAL OF

INSULATION UP TO 3" THICK SQ 250

REMOVE AND DISPOSE OF EXISTING ROOF

SHINGLE SYSTEM AND UNDERLAYMENT,

INCLUDING FLASHING AND DRIP EDGES SQ 100

REMOVE AND DISPOSE OF EXISTING ROLL

ROOFING AND UNDERLAYMENT, INCLUDING

FLASHING AND DRIP EDGES SQ 100

DEMOLITION, REMOVAL, AND DISPOSAL OF

EXISTING METAL ROOFING SYSTEM SQ 200

DEMOLITION, HAULING, AND DISPOSAL OF

AGGREGATE BALLAST. INCLUDE SPUDDING BACK

AND VACUUMING LOOSE AGGREGATE FROM

ENTIRE ROOF SURFACE. SQ 200

AGGREGATE BALLAST ON RESIDENTIAL UNITS

AND PREPARE SURFACE FOR ROLLED ROOFING SQ 200

REMOVE SINGLE PLY ROOFING (INCLUDING PVC,

EPDM, PIB, TPO AND OTHER MEMBRANE

ROOFING) DOWN TO THE DECK. INCLUDE

MEMBRANE, PENETRATION & WALL FLASHINGS

AND MEMBRANE FASTENERS. NOT TO INCLUDE

INSULATION, CRICKETS AND INSULATION

FASTENERS. SQ 50

ROOF MATERIALS (ACRM) ROOF MEMBRANE. SF 500

CEMENTITIOUS ASBESTOS FIBER ROOF

DECK/FORM BOARD SF 100

SURFACE IN ACCOURDANCE WITH PAINT

MANUFACTURER'S RECOMMENDATIONS. SF 200

CONCRETE MASONRY UNITS TO INCLUDE

GROUTING, TUCK POINTING, FORMWORK, AND

SUPPORTS. PERFORM WORK IN ACCORDANCE

SOFFIT FRAMING, TO INCLUDE SADDLES, CANT

STRIPS, CURBS FOR SCUTTLES AND

VENTILATORS, AND NAILERS ATTACHED AT THE

TOPS OF CONCRETE OR MASONRY CURBS,

EXPANSION JOINTS AND ROOF EDGES. FRAMING

MEMBERS ARE 4" TO 8" WIDE BY 18 GAUGE OR

THINNER. LF 100

RETROFIT SUB-PURLIN AND/OR FORMED SHAPED

FRAMING SYSTEM MECHANICALLY FASTENED TO

EXISTING AND/OR SUBSTRATE IN ACCORDANCE

WITH MANUFACTURES SPECIFICATIONS.

MINIMUM 16 GAUGE THICKNESS LF 1000

METAL FABRICATION

SHOP PRIMED STEEL MATERIALS INCLUDING BUT

NOT LIMITED TO: PLATES, ANGLES, ANCHOR

BOLTS, STEEL PIPE SLEEVES, WEDGE TYPE

INSERTS, EXPANSION ANCHORS, FRAMING,

SUPPORTS AND FABRICATED ITEMS FOR

APPLICATIONS THAT ARE NOT SPECIFIED IN

OTHER SPECIFICATION SECTIONS. LB 50

PIPE AND TUBE RAILINGS

FABRICATE AND INSTALL A SIDE OR BASE MOUNT

ALUMINUM PIPE AND/OR TUBE GUARDRAIL

SYSTEM LF 12

STAINLESS STEEL PIPE AND/OR TUBE GUARDRAIL

SYSTEM LF 12

FABRICATE AND INSTALL A SIDE OR BASE MOUNT

GALVANIZED STEEL PIPE AND/OR TUBE

GUARDRAIL SYSTEM LF 12

REMOVE AND DISPOSE OF AREAS OF

WOOD ROOF NAILERS, WHICH INCLUDES WOOD

SADDLES OR CRICKETS, CANT STRIPS, CURBS

FOR SCUTTLES AND VENTILATORS, AND WOOD

NAILERS BOLTED TO TOPS OF CONCRETE OR

MASONRY CURBS AND AT EXPANSION JOINTS BF 50

REMOVE AND REPLACE 3/8", 5/8"OR 3/4" ROOF

SHEATHING OR SOFFIT ON RESIDENTIAL UNITS SF 500

REMOVE AND REPLACE ROOF DECKING FOR

RESIDENTIAL UNITS, WHICH INCLUDES 1x OR 2x

DECKING SF 200

FURNISH AND INSTALL ROOFING LUMBER FOR

RESIDENTIAL UNITS, WHICH INCLUDES RAFTERS,

STUDS, PLATES, CAPS, COLLAR BEAMS,

SLEEPERS, NAILING STRIPS, SILLS, HEADERS

AND FASCIA BF 200

2032 1" THICK, R6.5 SQ 100

2033 2" THICK, R13 SQ 100

2034 3" THICK, R19 SQ 100

2035 4" THICK, R30 SQ 2000

PERLITE BOARD INSULATION, 3/4" THICK, R2.08

2036 <=100 SQ SQ 100

2037 > 100 SQ SQ 500

2038 BATT ROOF INSULATION, R-19 SF 1000

2039 METAL ROOF INSULATION, R30 SQ 200

2040 FIBER CANTS LF 1000

2041 WOOD CANTS LF 1000

2042 TAPERED FILL INSULATION BOARD BF 10000

2043 TAPERED 1/4" PER FOOT FOR DRAINAGE BF 10000

DIMENSIONAL FIBERGLASS SHINGLE SYSTEM

INCLUDING UNDERLAYMENT SQ 100

REMOVE AND REPLACE EXISTING SHINGLES

WITH NEW FIBERGLASS STRIP SHINGLES TO

MATCH ADJACENT AREAS, PARTIAL REPAIRS SQ 10

ADD FOR STEEP ROOFS (7 TO 12 PITCH OR

GREATER) SQ 50

2048 FELT, GLASS FIBER, 15 POUND ORGANIC SQ 20

2049 FELT, GLASS FIBER, 30 POUND ORGANIC SQ 10

2050 4-PLY BURS USING ASPHALT SQ 250

2051 4-PLY BURS USING COAL TAR SQ 20

2052 4-PLY BURS WITH SBS MODIFIED CAP SHEET SQ 2000

4-PLY BURS WITH SBS MODIFIED CAP SHEET

WITH ENERGY STAR RATED COATED SQ 1000

FOR RESIDENTIAL UNITS

SINGLE-PLY SBS MODIFIED CAP SHEET FOR

2055 REMOVE AND REPLACE PITCH PAN EA 30

2056 REPAIRS BLISTERS SF 500

2057 REPAIR SPLITS LF 200

2058 REPAIR RIDGES LF 200

FIBERGLASS PREPARED ROLL ROOFING

INCLUDING UNDERLAYMENT SQ 50

2061 CUT-OUT AND PATCH ROLL ROOFING SQ 5

FURNISH/INSTALL FULLY ADHERED PVC SYSTEM-

48 MILS SQ 50

FURNISH/INSTALL FULLY ADHERED PVC SYSTEM-

72 MILS SQ 50

FURNISH/INSTALL MECHANICALLY FASTENED PVC

SYSTEM- 60MILS SQ 50

FURNISH/INSTALL MECHANICALLY FASTENED PVC

SYSTEM- 72 MIL SQ 50

PVC LAMINATED METAL FLASHING UP TO 18"

STRETCH OUT LF 100

PVC LAMINATED METAL FLASHING 18.1" TO 36"

STRETCH OUT LF 100

2068 PVC VENT BOOTS EA 5

2069 PVC UNIVERSAL CORNERS EA 50

2070 PATCH AND REPAIR PVC SYSTEM SF 5

DIVISION 7-THERMOPLASTIC POLYOLEFIN

ROOFING

FURNISH/INSTALL FULLY ADHERED TPO SYSTEM-

45 MILS SQ 10

FURNISH/INSTALL FULLY ADHERED TPO SYSTEM-

60 MILS SQ 10

FURNISH/INSTALL MECHANICALLY FASTENED TPO

SYSTEM- 45MILS SQ 20

FURNISH/INSTALL MECHANICALLY FASTENED TPO

SYSTEM - 60 MIL SQ 2000

TPO LAMINATED METAL FLASHING UP TO 18"

STRETCH OUT LF 25

TPO LAMINATED METAL FLASHING 18.1" TO 36"

STRETCH OUT LF 25

2077 TPO VENT BOOTS EA 5

2078 TPO UNIVERSAL CORNERS EA 20

2079 PATCH AND REPAIR TPO SYSTEM SF 5

ROOFS SQ 10

ENERGY STAR RATED COATING SYSTEM APPLIED

TO NEW BUR ROOFING WITH MODIFIED CAP

SHEET SQ 50

2082 ELASTOMERIC COATING FOR ROOF REPAIRS SQ 10

TRAFFIC-BEARING ROOF DECK SURFACING

SYSTEM SQ 10

FURNISH AND INSTALL NEW GRAVEL

GUARD/FASCIA (FACE DIMENSION)

2084 GALVANIZED METAL, 4"- 5" LF 500

2085 GALVANIZED METAL, 6" - 7" LF 100

2086 ALUMINUM, 4" - 5" LF 500

2087 ALUMINUM, 6" - 7" LF 100

2088 COPPER, 4" - 5" LF 25

2089 COPPER, 6" -7" LF 25

2090 2-PIECE GALVANIZED METAL, 7" - 10" LF 50

2091 2-PIECE GALVANIZED METAL, 10" - 12" LF 50

2092 2-PIECE ALUMINUM, 7" - 10" LF 50

2093 2-PIECE ALUMINUM, 10" - 12" LF 50

2094 2-PIECE COPPER, 7" - 10" LF 50

2095 2-PIECE COPPER, 10" - 12" LF 50

2096 GALVANIZED METAL DRIP EDGE LF 200

2097 GALVANIZED METAL COUNTERFLASHING SF 100

2098 GALVANIZED METAL VALLEY FLASHING SF 100

2099 GALVANIZED METAL STEP FLASHING SF 100

2100 GALVANIZED METAL BASE FLASHING SF 100

2101 GALVANIZED METAL FLASHING- FLAT SHEET SF 100

2102 GALVANIZED METAL CAP FLASHING SF 100

2103 ALUMINUM DRIP EDGE LF 200

2104 ALUMINUM COUNTERFLASHING SF 100

2105 ALUMINUM VALLEY FLASHING SF 100

2106 ALUMINUM STEP FLASHING SF 100

2107 ALUMINUM BASE FLASHING SF 100

2108 ALUMINUM FLASHING - FLAT SHEET SF 100

2109 ALUMINUM CAP FLASHING SF 100

2110 METAL RIDGE VENT LF 100

REMOVE EXISTING EXPANSION JOINT AND

INSTALL NEW EXPANSION JOINT:

2111 ELASTOMERIC TYPE (NEOPRENE BELLOWS) LF 100

2112 ALUMINUM CAPPED CURB LF 100

2113 GALVANIZED CAPPED CURB LF 100

2114 REMOVE AND REPLACE VENTILATOR, ROOFTOP EA 1

2115 REMOVE AND REPLACE VENTILATOR, RIDGE LF 40

2116 REMOVE AND REPLACE VENTILATOR, GABLE EA 2

REMOVE AND REPLACE CURB ASSEMBLY, METAL

WITH CRICKET, FACTORY FABRICATED AND

2118 REMOVE AND REPLACE ROOF SCUTTLE EA 1

2119 FURNISH AND INSTALL STEEL WALL PANELS SF 100

2120 REMOVE EXISTING GUTTER AND DOWNSPOUTS LF 100

INCLUDING HANGARS, BRACKETS, SEALANTS,

ETC.

2121 24 GA. GALVANIZED/PRIMED, 4" X 5" LF 500

2122 24 GA. GALVANIZED/PRIMED, 5" X 7" LF 500

2123 ALUMINUM, 4" X 5" LF 100

2124 ALUMINUM, 5" X 7" LF 100

2125 16 OZ. COPPER, 4" X 5" LF 50

2126 16 OZ. COPPER, 5" X 7" LF 50

FURNISH & INSTALL NEW DOWNSPOUTS,

INCLUDES BRACKETS, ETC.

2127 24 GA. GALVANIZED/PRIMED, 3" X 4" LF 500

2128 ALUMINUM, 3" X 4" LF 100

2129 16 OZ. COPPER, 3" X 4" LF 100

FURNISH & INSTALL NEW PRE-FORMED

CONCRETE SPLASHBLOCKS EA 20

SLOPE <= 100 SQ SQ 150

DIVISION 7-STANDING SEAM METAL ROOF

STRUCTURAL<=100SQ SQ 150

NEW STANDING SEAM METAL ROOF SYSTEM,

STRUCTURAL, >100SQ SQ 5095

NEW HIGH PERFORMANCE STANDING SEAM

METAL ROOF SYSTEM, STRUCTURAL, WITH

INSPECTIONS AND WARRANTY PER SPEC NO. 07

41 20 SQ 150

NEW STANDING SEAM METAL ROOF SYSTEM,

ARCHITECTURAL SQ 150

2137 FASCIA PANEL SYSTEM SF 1000

2138 NON-PERFORATED SOFFIT PANEL SF 500

2139 PERFORATED SOFFIT PANEL SF 500

2140 REMOVE EXISTING CAULKING, CLEAN JOINT LF 150

2141 SILICONE CAULKING/SEALANT LF 150

CAULKING, MISCELLANEOUS APPLICATION

2143 PAINT, BASE SCHEME, EXT. LATEX, 1 COAT LF 1000

LEAD FLASHING, CLAMPING RING, AND CAST

IRON DOME STRAINER EA 5

2147 REMOVE AND REINSTALL EXISTING CONDUCTOR LF 250

PROTECTION SYSTEM

AIR TERMINALS, INCLUDES COPPER BASE FOR

NON-METAL ROOFS EA 20

AIR TERMINALS, INCLUDES ALUMINUM BASE FOR

METAL ROOFS EA 20

2151 CONDUCTORS LF 300

2152 FASTENERS, INCLUDES LOOPS AND CLIPS EA 100

2153 CONNECTORS EA 20

2154 COUNTERPOISE CONDUCTOR LF 1000

2155 GROUNDING RODS, 3/4" DIAMETER x 60' LONG EA 10

2156 SURGE PROTECTION EA 1

FURNISH AND INSTALL GROUND ACCESS PVC

TEST WELL, 12" I.D. X 24" LONG WITH 1/4"

GALVANIZED FRICTION FIT COVER WITH THE

WORD "GROUND" ENGREAVED ON TOP OF THE

COVER EA 10

2158 UL SITE INSPECTION EA 1

2159 EXTEND PLUMBING VENTS LF 40

2160 FLEXIBLE VENT PIPE FLASHING (METAL ROOFS) EA 30

REMOVE AND REPLACE LEAD FLASHING AT VENT

THRU ROOF (VTR) EA 40

REMOVE EXISTING VTR PENETRATION FLASHING

AND REPLACE WITH COLLAR TYPE FLASHING EA 20

REPAIR AND REPLACE SPALLS, HOLES, AND

CRACKS IN EXISTING CONCRETE ROOF DECK SF 50

FURNISH AND INSTALL VAPOR BARRIER OVER

CONCRETE DECKS SQ 50

FURNISH AND INSTALL ROSIN PAPER OVER

WOOD DECKS SQ 50

DISCONNECT AND RECONNECT ELECTRICAL

SERVICE (<200 AMP) EA 1

REMOVE EXISTING CONDUIT, ETC. AND REPLACE

WITH NEW 3/4" RIGID CONDUIT, INCLUDING WIRE,

BOXES, FITTINGS, ETC. LF 10

2168 ROLL COIL RIDGE VENT LF 10

2169 60MIL WATERPROOF UNDERLAYMENT LF 150

2170 SPUD EXISTING ROOF TO INSULATION SF 10

2171 CUT AND PATCH CONCRETE LF 1000

2172 TRENCH AND BACKFILL LF 1000

2173 12"x30" CONCRETE SPLASH BLOCKS EA 1

TESTING (CORE CUT) OF ROOFS-REPAIR TEST

AREA EA 1

2175 THERMAL IMAGING SURVEY OF ROOF SF 1

2176 AS-BUILT DRAWING PER SPEC. NO. 01 11 00 EA 1

2177 ENGINEERING RATE STRUCTURAL HR 1

2178 MECHANICAL SUBCONTRACTOR HR 1

2179 ELECTRICAL SUBCONTRACTOR HR 1

2180 LABOR RATE - MISCELLANEOUS WORK MH 1

OPTION YEAR TWO TOTAL

BID SCHEDULE OPT YR THREE

PRICE SCHEDULE

EGLIN AFB IDIQ ROOFING

2014-2015

OPTION YEAR THREE

ITE

M

DESCRIPTION Unit EST.

QTY.

UNIT

PRICE

NAILER, OR FRAMING, NOMINAL 2" THICK, 0-20 BF BF 200

REMOVE AND REPLACE EXISTING WOOD BLOCKING,

NAILER, OR FRAMING, NOMINAL 2" THICK, >20 BF BF 500

3003 REMOVE AND REPLACE WOOD DECKING BF 200

REMOVE AND REPLACE PLYWOOD ROOF

SHEATHING SF 500

REMOVE AND REPLACE EXISTING WOOD FASCIA

BOARDS, NOMINAL 1" THICK, 0-20 BF BF 100

REMOVE AND REPLACE EXISTING WOOD FASCIA

BOARDS, NOMINAL 1" THICK, >20 BF BF 400

PLY BURS WITH FLASHINGS, GRAVEL, ETC. (DOES

NOT INCLUDE INSULATION) SQ 250

DEMOLITION, HAULING, AND DISPOSAL OF

INSULATION UP TO 3" THICK SQ 250

REMOVE AND DISPOSE OF EXISTING ROOF SHINGLE

SYSTEM AND UNDERLAYMENT, INCLUDING

FLASHING AND DRIP EDGES SQ 100

REMOVE AND DISPOSE OF EXISTING ROLL ROOFING

AND UNDERLAYMENT, INCLUDING FLASHING AND

DRIP EDGES SQ 100

DEMOLITION, REMOVAL, AND DISPOSAL OF EXISTING

METAL ROOFING SYSTEM SQ 200

DEMOLITION, HAULING, AND DISPOSAL OF

AGGREGATE BALLAST. INCLUDE SPUDDING BACK

AGGREGATE BALLAST ON RESIDENTIAL UNITS AND

PREPARE SURFACE FOR ROLLED ROOFING SQ 200

REMOVE SINGLE PLY ROOFING (INCLUDING PVC,

EPDM, PIB, TPO AND OTHER MEMBRANE ROOFING)

DOWN TO THE DECK. INCLUDE MEMBRANE,

PENETRATION & WALL FLASHINGS AND MEMBRANE

FASTENERS. NOT TO INCLUDE INSULATION,

CRICKETS AND INSULATION FASTENERS. SQ 50

ROOF MATERIALS (ACRM) ROOF MEMBRANE. SF 500

WATER BLAST CLEAN EXISTING MASONRY SURFACE

IN ACCOURDANCE WITH PAINT MANUFACTURER'S

RECOMMENDATIONS. SF 200

CONCRETE MASONRY UNITS TO INCLUDE

GROUTING, TUCK POINTING, FORMWORK, AND

SUPPORTS. PERFORM WORK IN ACCORDANCE WITH

MANUFACTURER'S RECOMMENDATIONS.

REMOVE EXISTING STEEL ROOF DECK AND REPLACE

WITH NEW STEEL ROOF DECK SQ 50

SOFFIT FRAMING, TO INCLUDE SADDLES, CANT

STRIPS, CURBS FOR SCUTTLES AND VENTILATORS,

AND NAILERS ATTACHED AT THE TOPS OF

CONCRETE OR MASONRY CURBS, EXPANSION

JOINTS AND ROOF EDGES. FRAMING MEMBERS ARE

4" TO 8" WIDE BY 18 GAUGE OR THINNER. LF 100

RETROFIT SUB-PURLIN AND/OR FORMED SHAPED

FRAMING SYSTEM MECHANICALLY FASTENED TO

EXISTING AND/OR SUBSTRATE IN ACCORDANCE

WITH MANUFACTURES SPECIFICATIONS. MINIMUM 16

GAUGE THICKNESS LF 1000

METAL FABRICATION

SHOP PRIMED STEEL MATERIALS INCLUDING BUT

NOT LIMITED TO: PLATES, ANGLES, ANCHOR BOLTS,

STEEL PIPE SLEEVES, WEDGE TYPE INSERTS,

EXPANSION ANCHORS, FRAMING, SUPPORTS AND

FABRICATED ITEMS FOR APPLICATIONS THAT ARE

NOT SPECIFIED IN OTHER SPECIFICATION

SECTIONS. LB 50

PIPE AND TUBE RAILINGS

STAINLESS STEEL PIPE AND/OR TUBE GUARDRAIL

SYSTEM LF 12

FABRICATE AND INSTALL A SIDE OR BASE MOUNT

GALVANIZED STEEL PIPE AND/OR TUBE GUARDRAIL

SYSTEM LF 12

REMOVE AND DISPOSE OF AREAS OF

WOOD ROOF NAILERS, WHICH INCLUDES WOOD

SADDLES OR CRICKETS, CANT STRIPS, CURBS FOR

SCUTTLES AND VENTILATORS, AND WOOD NAILERS

BOLTED TO TOPS OF CONCRETE OR MASONRY

CURBS AND AT EXPANSION JOINTS BF 50

REMOVE AND REPLACE 3/8", 5/8"OR 3/4" ROOF

SHEATHING OR SOFFIT ON RESIDENTIAL UNITS SF 500

REMOVE AND REPLACE ROOF DECKING FOR

RESIDENTIAL UNITS, WHICH INCLUDES 1x OR 2x

DECKING SF 200

FURNISH AND INSTALL ROOFING LUMBER FOR

RESIDENTIAL UNITS, WHICH INCLUDES RAFTERS,

3032 1" THICK, R6.5 SQ 100

3033 2" THICK, R13 SQ 100

3034 3" THICK, R19 SQ 100

3035 4" THICK, R30 SQ 2000

PERLITE BOARD INSULATION, 3/4" THICK, R2.08

3036 <=100 SQ SQ 100

3037 > 100 SQ SQ 500

3038 BATT ROOF INSULATION, R-19 SF 1000

3039 METAL ROOF INSULATION, R30 SQ 200

3040 FIBER CANTS LF 1000

3041 WOOD CANTS LF 1000

3042 TAPERED FILL INSULATION BOARD BF 10000

3043 TAPERED 1/4" PER FOOT FOR DRAINAGE BF 10000

FIBERGLASS STRIP SHINGLE SYSTEM INCLUDING

UNDERLAYMENT SQ 300

FURNISH AND INSTALL NEW ARCHITECTURAL

DIMENSIONAL FIBERGLASS SHINGLE SYSTEM

INCLUDING UNDERLAYMENT SQ 100

REMOVE AND REPLACE EXISTING SHINGLES WITH

NEW FIBERGLASS STRIP SHINGLES TO MATCH

ADJACENT AREAS, PARTIAL REPAIRS SQ 10

ADD FOR STEEP ROOFS (7 TO 12 PITCH OR

GREATER) SQ 50

3048 FELT, GLASS FIBER, 15 POUND ORGANIC SQ 20

3049 FELT, GLASS FIBER, 30 POUND ORGANIC SQ 10

3050 4-PLY BURS USING ASPHALT SQ 250

3051 4-PLY BURS USING COAL TAR SQ 20

3052 4-PLY BURS WITH SBS MODIFIED CAP SHEET SQ 2000

3055 REMOVE AND REPLACE PITCH PAN EA 30

3056 REPAIRS BLISTERS SF 500

3057 REPAIR SPLITS LF 200

3058 REPAIR RIDGES LF 200

APPLY RESATURANT AND INSTALL NEW AGGREGATE

ON EXPOSED FELT AREAS SF 500

FIBERGLASS PREPARED ROLL ROOFING INCLUDING

3061 CUT-OUT AND PATCH ROLL ROOFING SQ 5

MILS SQ 50

FURNISH/INSTALL FULLY ADHERED PVC SYSTEM- 72

MILS SQ 50

FURNISH/INSTALL MECHANICALLY FASTENED PVC

SYSTEM- 60MILS SQ 50

FURNISH/INSTALL MECHANICALLY FASTENED PVC

SYSTEM- 72 MIL SQ 50

PVC LAMINATED METAL FLASHING UP TO 18"

STRETCH OUT LF 100

PVC LAMINATED METAL FLASHING 18.1" TO 36"

STRETCH OUT LF 100

3068 PVC VENT BOOTS EA 5

3069 PVC UNIVERSAL CORNERS EA 50

3070 PATCH AND REPAIR PVC SYSTEM SF 5

MILS SQ 10

FURNISH/INSTALL FULLY ADHERED TPO SYSTEM- 60

MILS SQ 10

FURNISH/INSTALL MECHANICALLY FASTENED TPO

SYSTEM- 45MILS SQ 20

FURNISH/INSTALL MECHANICALLY FASTENED TPO

SYSTEM - 60 MIL SQ 2000

TPO LAMINATED METAL FLASHING UP TO 18"

STRETCH OUT LF 25

TPO LAMINATED METAL FLASHING 18.1" TO 36"

STRETCH OUT LF 25

3077 TPO VENT BOOTS EA 5

3078 TPO UNIVERSAL CORNERS EA 20

3079 PATCH AND REPAIR TPO SYSTEM SF 5

ROOFS SQ 10

ENERGY STAR RATED COATING SYSTEM APPLIED TO

NEW BUR ROOFING WITH MODIFIED CAP SHEET SQ 50

3082 ELASTOMERIC COATING FOR ROOF REPAIRS SQ 10

3083 TRAFFIC-BEARING ROOF DECK SURFACING SYSTEM SQ 10

3084 GALVANIZED METAL, 4"- 5" LF 500

3085 GALVANIZED METAL, 6" - 7" LF 100

3086 ALUMINUM, 4" - 5" LF 500

3087 ALUMINUM, 6" - 7" LF 100

3088 COPPER, 4" - 5" LF 25

3089 COPPER, 6" -7" LF 25

3090 2-PIECE GALVANIZED METAL, 7" - 10" LF 50

3091 2-PIECE GALVANIZED METAL, 10" - 12" LF 50

3092 2-PIECE ALUMINUM, 7" - 10" LF 50

3093 2-PIECE ALUMINUM, 10" - 12" LF 50

3094 2-PIECE COPPER, 7" - 10" LF 50

3095 2-PIECE COPPER, 10" - 12" LF 50

3096 GALVANIZED METAL DRIP EDGE LF 200

3097 GALVANIZED METAL COUNTERFLASHING SF 100

3098 GALVANIZED METAL VALLEY FLASHING SF 100

3099 GALVANIZED METAL STEP FLASHING SF 100

3100 GALVANIZED METAL BASE FLASHING SF 100

3101 GALVANIZED METAL FLASHING- FLAT SHEET SF 100

3102 GALVANIZED METAL CAP FLASHING SF 100

3103 ALUMINUM DRIP EDGE LF 200

3104 ALUMINUM COUNTERFLASHING SF 100

3105 ALUMINUM VALLEY FLASHING SF 100

3106 ALUMINUM STEP FLASHING SF 100

3107 ALUMINUM BASE FLASHING SF 100

3108 ALUMINUM FLASHING - FLAT SHEET SF 100

3109 ALUMINUM CAP FLASHING SF 100

3110 METAL RIDGE VENT LF 100

3111 ELASTOMERIC TYPE (NEOPRENE BELLOWS) LF 100

3112 ALUMINUM CAPPED CURB LF 100

3113 GALVANIZED CAPPED CURB LF 100

3114 REMOVE AND REPLACE VENTILATOR, ROOFTOP EA 1

3115 REMOVE AND REPLACE VENTILATOR, RIDGE LF 40

3116 REMOVE AND REPLACE VENTILATOR, GABLE EA 2

REMOVE AND REPLACE CURB ASSEMBLY, METAL

WITH CRICKET, FACTORY FABRICATED AND

3118 REMOVE AND REPLACE ROOF SCUTTLE EA 1

3119 FURNISH AND INSTALL STEEL WALL PANELS SF 100

3120 REMOVE EXISTING GUTTER AND DOWNSPOUTS LF 100

3121 24 GA. GALVANIZED/PRIMED, 4" X 5" LF 500

3122 24 GA. GALVANIZED/PRIMED, 5" X 7" LF 500

3123 ALUMINUM, 4" X 5" LF 100

3124 ALUMINUM, 5" X 7" LF 100

3125 16 OZ. COPPER, 4" X 5" LF 50

3126 16 OZ. COPPER, 5" X 7" LF 50

3127 24 GA. GALVANIZED/PRIMED, 3" X 4" LF 500

3128 ALUMINUM, 3" X 4" LF 100

3129 16 OZ. COPPER, 3" X 4" LF 100

SLOPE <= 100 SQ SQ 150

STRUCTURAL<=100SQ SQ 150

NEW STANDING SEAM METAL ROOF SYSTEM,

STRUCTURAL, >100SQ SQ 4640

NEW HIGH PERFORMANCE STANDING SEAM METAL

ROOF SYSTEM, STRUCTURAL, WITH INSPECTIONS

AND WARRANTY PER SPEC NO. 07 41 20 SQ 150

NEW STANDING SEAM METAL ROOF SYSTEM,

ARCHITECTURAL SQ 150

3137 FASCIA PANEL SYSTEM SF 1000

3138 NON-PERFORATED SOFFIT PANEL SF 500

3139 PERFORATED SOFFIT PANEL SF 500

3140 REMOVE EXISTING CAULKING, CLEAN JOINT LF 150

3141 SILICONE CAULKING/SEALANT LF 150

CAULKING, MISCELLANEOUS APPLICATION

3143 PAINT, BASE SCHEME, EXT. LATEX, 1 COAT LF 1000

LEAD FLASHING, CLAMPING RING, AND CAST IRON

DOME STRAINER EA 5

REMOVE EXISTING LIGHTNING PROTECTION SYSTEM

AND REINSTALL EXISTING LIGHTNING PROTECTION

SYSTEM WITH NEW FASTENERS

3147 REMOVE AND REINSTALL EXISTING CONDUCTOR LF 250

REMOVE AND INSTALL NEW FASTENERS, INCLUDING

LOOPS AND CLIPS EA 25

AND INSTALL NEW LIGHTNING PROTECTION SYSTEM

AIR TERMINALS, INCLUDES COPPER BASE FOR NON-

METAL ROOFS EA 20

3151 CONDUCTORS LF 300

3152 FASTENERS, INCLUDES LOOPS AND CLIPS EA 100

3153 CONNECTORS EA 20

3154 COUNTERPOISE CONDUCTOR LF 1000

3155 GROUNDING RODS, 3/4" DIAMETER x 60'…