Answers_FA252120B0010.pdf
PDF 54 KB Posted
- Attached to
- Replace Street Light Poles and Fixtures, Various Federal contract opportunity
- Solicitation number
- FA252120B0010
About this file
This document contains questions and answers regarding solicitation number FA252120B0010 to replace street light poles and fixtures at Patrick Air Force Base. The contractor will be responsible for removing existing concrete light poles and fixtures and installing new poles and fixtures throughout the base, in accordance with contract specifications, drawings, and applicable regulations. Questions addressed include procedures for requesting a storage area, salvageable materials, required splice and wirenut types, allowances for replacing burnt wire and damaged conduit, voltage ranges for existing fixtures, minimum required wire sizes, whether grounding rods exist at each pole, and adjusting the performance period to 180 days due to pandemic-related material delivery delays.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SF 1409_ABSTRACT OF OFFERS.pdf | ||
| Solicitation Amendment FA252120B00100001 SF 30.pdf | ||
| Atch 9 Questions and Answers.pdf | ||
| Atch 4-WD FL20200001 (03Jul2020).pdf | ||
| Atch 6 GPP Form.pdf | ||
| Atch 8 Questions and Answers Template.doc | DOC document | |
| Atch 2 Drawings.pdf | ||
| Solicitation - FA252120B0010.pdf | ||
| Atch 7 HAZWST Form.doc | DOC document | |
| Atch 5 Badge Request (45 SFS).pdf | ||
| Atch 3 CECC Form 3052.xls | XLS spreadsheet | |
| Atch 1 Technical Specifications .pdf |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA2521-20-B-0010
QUESTIONS AND ANSWERS
Q1. Question: Will there be a designated storage area for materials and equipment, what are the dimensions?
45 CES Response: Refer to Specification section 01 11 00.00 30 paragraph 1.8 for procedures to request a storage/laydown area.
Q2. Question: Can all salvageable materials be identified?
45 CES Response: The 45 CES Electrical Shop has identified approximately 9 light poles in the area surrounding Buildings 820 and 821 that are to be salvaged. An amendment to the drawings will be issued to reflect this.
Q3. Question: What kind of splices/wirenuts will be required when re-connecting wires coming from the pole to the pullbox?
45 CES Response: Refer to Specification section 26 05 00.00 40 paragraph 3.2.1.8 for splice type(s).
Q4. Question: What allowance can we use for burnt wire and bad conduit if replacement is needed?
45 CES Response: Provide new wire and conduit from the handhole to the light fixture, as shown on sheet DT-601. Where there are damaged handholes, as indicated in the drawings, the replacement should include a minimum 4 ft allowance for new conduit installation to repair damage to existing.
Q5. Question: What is the voltage in each zone?
45 CES Response: The voltage varies; the existing fixtures accept multiple voltages within a range. 120-277V and 347-480V are the ranges of the existing fixtures. The color of the photocell on top of the fixture indicates the voltage range.
Q6. Question: Wire size required if replacement is needed?
45 CES Response: Refer to sheet DT-601, TYPICAL CONCRETE LIGHT POLE DETAIL, for minimum wire size required
Q7. Question: Are there grounding rods at each pole at this time, or should cost be considered in bid?
45 CES Response: Refer to sheet DT-601, a new ground rod is required for each pole.
Q 8. Question: Is there a specified color for the light pole replacement?
45 CES Response: The Gov’t intends to perform color selection during the submittal stage.
Q9. Question: Could the current timeframe be adjusted to 180 days? Considering material delivery date for material is 60 days due to the pandemic?
45 CES Response: Period of performance can be adjusted to 180 days after issuance of NTP
File details come from the government source that posted it. Updated .