Solicitation Amendment FA226320Q00110001.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Supplies or Services & Prices or Costs

The following CLIN(s) / SLIN(s) were modified:

0001 - Circular Geometry Measuring Machine First Production Unit IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1) For: AFPSL (1)

INFORMATION FROM TO

CIN F4FTMM0065A0010000AA

Description

Circular Geometry Measuring Machine First Production Unit IAW PD 20M-201A-DI, dated 7 February 2020 (Attachment 1) For: AFPSL (1)

Circular Geometry Measuring Machine First Production Unit IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1) For: AFPSL (1)

0002 - Data IAW DD 1423, Exhibit A (Attachment 2) A001 - Technical Manual Contract Requirements A002 - Calibration Certificate

INFORMATION FROM TO

CIN F4FTMM0065A0010000AA

0003 - 3 Year Warranty

INFORMATION FROM TO

CIN F4FTMM0065A0010000AA

0004 - Circular Geometry Measuring Machine IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1) For: Eglin AFB FL (1), Vandenberg AFB CA (1), Nellis AFB NV (1), Holloman AFB NM (1), Robins AFB

GA (1)

INFORMATION FROM TO

Description

Circular Geometry Measuring Machine IAW PD 20M-201A-DI, dated 7 February 2020 (Attachment 1) For: Eglin AFB FL (1), Vandenberg AFB CA (1), Nellis AFB NV (1), Holloman AFB NM (1), Robins AFB GA (1)

Circular Geometry Measuring Machine IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1) For: Eglin AFB FL (1), Vandenberg AFB CA (1), Nellis AFB NV (1), Holloman AFB NM (1), Robins AFB GA (1)

Option Line Item 1001 - Circular Geometry Measuring Machine IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1) Option CLIN CLINs 1001-1003 are for the remaining 26 units of the initial 32 unit requirement. However, there is no guarantee that an option will be exercised. The Government reserves the right to exercise in increments up to the maximum quantity specified with no limits on the number of modifications used to exercise the quantities. This option may be exercised anytime from the date of award through 30 September 2022, or 30 days after completion of CLIN 0004, whichever is later. Completion means all units have been delivered, accepted, and

FA226320Q00110001

paid. SubCLINs will be added for accounting purposes. Based on when the units are ordered, the unit prices shall be as follows:

1-26 units from time of award through 30 September 2020: $_______________________ ea.

1-26 units ordered between 1 October 2020 and 30 September 2021: $_____________________ea.

1-26 units ordered between 1 October 2021 and 30 September 2022: $_____________________ea.

INFORMATION FROM TO

Description

Circular Geometry Measuring Machine IAW PD 20M-201A-DI, dated 7 February 2020 (Attachment 1) Option CLIN CLINs 1001-1003 are for the remaining 26 units of the initial 32 unit requirement. However, there is no guarantee that an option will be exercised. The Government reserves the right to exercise in increments up to the maximum quantity specified with no limits on the number of modifications used to exercise the quantities. This option may be exercised anytime from the date of award through 30 September 2022, or 30 days after completion of CLIN 0004, whichever is later.

Completion means all units have been delivered, accepted, and paid. SubCLINs will be added for accounting purposes. Based on when the units are ordered, the unit prices shall be as follows:

1-26 units from time of award through 30 September 2020: $_______________________ ea.

1-26 units ordered between 1 October 2020 and 30 September 2021: $_____________________ea.

1-26 units ordered between 1 October 2021 and 30 September 2022: $_____________________ea.

Circular Geometry Measuring Machine IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1) Option CLIN CLINs 1001-1003 are for the remaining 26 units of the initial 32 unit requirement. However, there is no guarantee that an option will be exercised. The Government reserves the right to exercise in increments up to the maximum quantity specified with no limits on the number of modifications used to exercise the quantities. This option may be exercised anytime from the date of award through 30 September 2022, or 30 days after completion of CLIN 0004, whichever is later.

Completion means all units have been delivered, accepted, and paid. SubCLINs will be added for accounting purposes. Based on when the units are ordered, the unit prices shall be as follows:

1-26 units from time of award through 30 September 2020: $_______________________ ea.

1-26 units ordered between 1 October 2020 and 30 September 2021: $_____________________ea.

1-26 units ordered between 1 October 2021 and 30 September 2022: $_____________________ea.

Option Line Item 1001AA - Circular Geometry Measuring Machine IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1)

SAME AS CLIN 1001

Up to 26 units are available to be exercised. Additional SubCLINs will be added for accounting purposes.

INFORMATION FROM TO

Description

Circular Geometry Measuring Machine IAW PD 20M-201A-DI, dated 7 February 2020 (Attachment 1)

SAME AS CLIN 1001

Up to 26 units are available to be exercised. Additional SubCLINs will be added for accounting purposes.

Circular Geometry Measuring Machine IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1)

SAME AS CLIN 1001

Up to 26 units are available to be exercised. Additional SubCLINs will be added for accounting purposes.

Option Line Item 1003 - 3 year warranty Option CLIN Up to 26 units are available to be exercised of the initial 32 unit requirement.

1-26 units ordered from time of award through 30 September 2020: $_____________ea.

1-26 units ordered from 1 October 2020 through 30 September 2021: $________________ea.

1-26 units ordered from 1 October 2021 through 30 September 2022: $________________ea.

INFORMATION FROM TO

Description

3year warranty Option CLIN Up to 26 units are available to be exercised of the initial 32 unit requirement.

1-26 units ordered from time of award through 30 September 2020: $_____________ea.

1-26 units ordered from 1 October 2020 through 30 September 2021: $________________ea.

1-26 units ordered from 1 October 2021 through 30 September 2022: $________________ea.

3 year warranty Option CLIN Up to 26 units are available to be exercised of the initial 32 unit requirement.

1-26 units ordered from time of award through 30 September 2020: $_____________ea.

1-26 units ordered from 1 October 2020 through 30 September 2021: $________________ea.

1-26 units ordered from 1 October 2021 through 30 September 2022: $________________ea.

Specification/SOW/SOO/ORD

The Requirements text has been modified to:

Circular Geometry Measuring Machine IAW PD 20M-201A-DI, Rev. 1, dated 25 June 2020 (Attachment 1)

Inspection and Acceptance

Miscellaneous text in this section has been modified to:

Inspection and Acceptance of the First Production unit will be completed by AFMETCAL in accordance with Purchase Description 20M-201A-DI, Rev. 1 dated 25 June 2020 (Attachment 1).

Inspection and Acceptance of the production units will be completed within 45 days after completion of installation and training at the PMELs.

Invoices shall not be submitted in WAWF until units have passed acceptance testing and training has been completed. The contractor will be authorized to invoice upon notification from the Contract Administrator.

AFLCMC WNMK

813 IRVING WICK DR W BLDG HORTON

CP 740 788 5045

HEATH, OH 43056-6116

United States Michael Hickey, Email: michael.hickey.2@us.af.mil Telephone: 366-5043

Email: amy.poling@us.af.mil Telephone: (740) 788-5045