Exhibit A Technical Requirements.pdf

Ehhibit A SPRBL1-21-Q-0009 Page 1 of 6 Issue: 1 December 2020

TECHNICAL REQUIREMENTS

WIN-T INC 2

NSN NOMENCLATURE

6105-01-616-7891 MOTOR-TACHOMETER GENERATOR

Ehhibit A SPRBL1-21-Q-0009 Page 2 of 6

VERSION REVISIONS

Version Added/Deleted Reason 24 Jun

Added: Version Revision table for future use

09 Mar

Add: Contract Security Requirements section APG G-2 Army Security Office policy.

Ehhibit A SPRBL1-21-Q-0009 Page 3 of 6

TABLE OF CONTENTS

1.0 SCOPE

2.0 APPLICABLE DOCUMENTS

3.0 CONFIGURATION BASELINE

4.0 UNIQUE IDENTIFICATION (UID)

4.1 Unique Identification (UID) Marking

4.2 UID Data Submission Guidance

5.0 PACKAGING

5.1 Preservation, Packing and Marking Instructions

5.2 Wood Packing Material

6.0 CONTRACT DATA REQUIREMENT LIST (CDRL) DD 1423-1

6.1 CDRL List

6.2 Individual CDRLs

Ehhibit A SPRBL1-21-Q-0009 Page 4 of 6

1.0 SCOPE

This Technical Requirements Document defines the efforts required to produce or procure all of the products required by this solicitation in support of Warfighter Information Network-Tactical (WIN-T) Increment 2 in accordance with the Documents listed below.

2.0 APPLICABLE DOCUMENTS

Military and Federal Standards MIL-STD-129R Military Marking for Shipment and Storage MIL-STD-130N Identification Marking of U.S. Military Property

Military and Federal Specifications

Other Documents DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM)

Commercial Documents ASTM D3951-18 Standard Practice for Commercial Packaging

Security Documents

3.0 CONFIGURATION BASELINE

The applicable Configuration Baselines (CB), for the listed Configuration Item (CI), are as listed in the table below.

NSN CAGE MANUFACTURE MFG PN NOMENCLATURE

6105-01-616-7891 43WN8 AVL 243-001-521 MOTOR-TACHOMETER

GENERATOR

4.0 UNIQUE IDENTIFICATION (UID)

4.1 Unique Identification (UID) Marking

The Contractor shall ensure that all delivered equipment meeting the UID criteria is marked and the applicable data is submitted to the DOD UID Repository in accordance with CDRL A001. The Contractor shall comply with DFARS 252.211-7003, Item Identification and Valuation, to provide UID, or DOD-recognized unique identification equivalent, for all applicable equipment items with an acquisition cost of $5,000 or more, or for items of lesser value as designated by the Government. UID markings shall be per the latest version of MIL-STD-

130. Guidance for UID marking of embedded components shall be per the latest version of MIL-STD-130 and the website: http://www.acq.osd.mil/dpap/pdi/uid/

Ehhibit A SPRBL1-21-Q-0009 Page 5 of 6

4.2 UID Data Submission Guidance

The Contractor shall submit UID data via the Wide Area Work Flow (WAWF) Paperless Contracting Environment per the latest published guidance in accordance with CDRL A001.

5.0 PACKAGING

5.1 Preservation, Packing and Marking Instructions

Packaging shall be in accordance with ASTM D3951-18 Standard Practice for Commercial Packaging. Level of Preservation (LOP): Commercial, Level of Pack (LPK): Commercial, Quantity Unit Pack (QUP): 001. Marking shall be IAW MIL-STD-129R. MIL-STD-129R is applicable.

5.2 Wood Packing Material

Wood packing material includes pallets. See DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM).

6.0 CONTRACT DATA REQUIREMENT LIST (CDRL) DD 1423-1

None

6.1 CDRL List

CDRL Data Line No. DID Identification Title A001 DI-MGMT 81803A Item Unique Identification (IUID) Marking Plan

Ehhibit A SPRBL1-21-Q-0009 Page 6 of 6

6.2 Individual CDRLs

CDRL A001: IUID Marking Plan

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA. 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

9000 A TDP TM OTHER MGMT

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

WIN-T INC 2

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE

GROUP

A001 Item Unique Identification (IUID) Marking Plan

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

DI-MGMT-81803A Tech Requirements: 4.1, 4.2 AMEL-LCC-NB

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

N/A N/A ASRQ BLOCK 16 b. COPIES

8. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE Draft

Final

ASRQ

Reg

Repro

16. REMARKS:

BLK 4: Format of the IUID shall be in accordance with this Data Item Description, DI-MGMT-81803A. In addition to the DID, the Contractor shall comply with DFARS 252.211-7003, Item Identification and Valuation, to provide UID, or DOD-recognized unique identification equivalent. UID markings shall be per the latest version of MIL-STD-130.

The Contractor shall submit UID data via the Wide Area Work Flow (WAWF) Paperless Contracting Environment per the latest published guidance.

BLK 12: IUID implemented on first delivery. IUID Data shall be submitted upon contract award to the Government for review and approval. The Government shall provide comments or approval within five (5) business days. All delivered equipment meeting the IUID criteria is to be marked and the applicable data is submitted to the DOD UID Repository before the assets leave the Contractor’s facility.

BLK 14: Data shall be submitted and exchanged electronically in Microsoft Office suite of applications (MS Word, Excel, Power Point, Access, and Project) or Portable Document Format (PDF)

DSCC-ZLAA

AMEL-LCC-NB

15. TOTAL 0 2 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Tyler Gibson Systems Engineer FCDD-ISP-CS 30 June 2020

Angel Acevedo Supervisory Electronics Engineer FCDD-ISP-CS 30 June 2020

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 1 of 1 Pages