EXHIBIT A 60928303 CDRL n DATA.pdf
PDF 530 KB Posted
- Attached to
- PLATE
- Solicitation number
- SPMYM226Q7313
About this file
This is a Contract Data Requirements List (DD Form 1423-1) and Material Ordering Data document for a single nickel-chromium-molybdenum alloy plate procurement.
The contract requires supply of one plate of Inconel 625 (UNS N06625), ASTM B-443 specification, Grade 1 (Annealed), hot-rolled and descaled finish, with dimensions of 1.50" thickness, 36" width, and 48" length. The material specification allows for alternative UNS N06219 alloy or Grade 2 (Solution Annealed) condition if N06625 Grade 1 is not specified. The purchase is for a Purchasing Activity under Data Acquisition Document DI-MISC-82386, with distribution authorized to DoD and DoD contractors only (effective 4/2/2026). The vendor must provide actual values per IAW procurement specification, ensure certificates are traceable to material via unique markings, and submit a manufacturer's certification stating the material was manufactured, tested, and inspected per specification with test results on representative samples. Samples for product (check) analysis are required per section 5.2. The purchaser does not wish to witness tests or inspection at the place of manufacture. Certification/Data Report documentation must be attached in the Wide Area Workflow (WAWF) e-Business Suite prior to material shipment, with acceptance or rejection accomplished with corresponding material. The document was prepared on 4/2/2026 and approved the same date.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM226Q7313.pdf | ||
| EXHIBIT B 60928304 CDRL n DATA.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
IDN: N4523A 6092-8303
ICN: 38JCD59602 KO: F14 KOI: 001
Paragraph 4.1 Ordering Data
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip, ASTM B-443, dtd 8-10-2000 (Reapproved 2009)
4.1.2 UNS number: N06625
4.1.3 Condition:
UNS N06625 (If neither grade of N06625 is specified, Grade 1 will be supplied)
Grade 1 (Annealed)
Grade 2 (Solution Annealed)
UNS N06219
Solution annealed only
4.1.4 Finish:
Plate:
Hot-rolled annealed or solution annealed, and descaled.
Cold-rolled annealed or solution annealed, and descaled.
Sheet:
Hot-rolled annealed or solution annealed, and descaled.
Cold-rolled annealed or solution annealed descaled or bright annealed.
Strip:
Cold-rolled annealed or solution annealed descaled or bright annealed.
4.1.5 Dimensions: Thickness 1.50" Width 36" Length 48"
4.1.6 Quantity: 1EA
4.1.7 Optional Requirements:
Sheet furnished in: coil or cut straight lengths or random straight lengths
Strip furnished in: coil or cut straight lengths or random straight lengths
Plate cut to (see 7.2.1 and 7.3.2):
4.1.8 Certification is required
If required, manufacturer’s certification shall be furnished stating that the material was manufactured, tested, and inspected in accordance with this specification, and that test results on representative samples meet specification requirements.
Test results shall be furnished.
4.1.9 Samples for Product (Check) Analysis are required - (see 5.2)
4.1.10 Purchaser Inspection: Purchaser does not wish to witness tests or inspection of material at place of manufacture.
Additional Data Requirements: PLATE, NICKEL ALLOY
1.50" THK 36” X 48”,
INCONEL 625, ASTM B443, ALLOY N06625, GRADE 1, ANNEALED HOT ROLLED
Prepared By:
Code: 127.2
File details come from the government source that posted it. Updated .