Engineering Instructions.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF A:

CABLE ASSEMBLY, SP ELEC WP 4042SS

2. PART NUMBER:

47C524855

3. NATIONAL STOCK NUMBER:

1190-01-149-2069

PREPARED BY:

ALDEN HYDE

OFFICE SYMBOL:

414 SCMS/GUEA

DATE:

3/3/22

HILL AFB FORM 462 Page 1 of 2

4. Several changes to the engineering were discovered. These changes supersede the EO 15A0995-H in its entirety. The changes are as follows:

4.1 CHANGE NOTE 5 AS FOLLOWS:

WAS: EMR adapter to be covered with light wall heat shrink sleeving.

IS: Use lap joints at P1 or P2 and cover with item 7 heat shrink sleeving, stagger joints not to exceed 1.25 inches maximum.

4.2 CHANGE NOTE 6 AS FOLLOWS:

WAS: Use lap joints at P1 and cover with item 7 heat shrink sleeving, stagger joints not to exceed 1.25 inches maximum.

IS: Use EMR adapter at P2, pot EMR adapter, and cover EMR adapter with light wall heat shrink sleeving.

4.3 CHANGE NOTE 7 AS FOLLOWS:

WAS: Pot P1 connector to a maximum of 1.5 inches from rear face of connector.

IS: Use item 8 backshell at P1 and pot backshell.

4.4 LOCATION A7:

WAS: IS:

5. It is acceptable to use thermally printed M23053/5 white sleeving covered with M23053/5 clear sleeving protection for the cable tags.

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF A:

CABLE ASSEMBLY, SP ELEC WP4042SS

2. PART NUMBER:

47C524855G1

3. NATIONAL STOCK NUMBER:

1190-01-149-2069

PREPARED BY:

ALDEN HYDE

OFFICE SYMBOL:

414 SCMS/GUEA

DATE:

3/3/22

HILL AFB FORM 462 Page 2 of 2

4. Several changes to the engineering were discovered. These changes supersede EO 16A0671-H in its entirety. The changes are as follows:

4.1 CHANGE THE PARTS LIST AS FOLLOWS: