Engineering_ Design_ Planning_ and Permitting - Underground Storage Tank Closure and Above Ground Storage Tank Replacement Project.pdf

This is a Scope of Work document prepared by the City of Culver City, California, for the Engineering, Design, Planning, and Permitting – Underground Storage Tank Closure and Above Ground Storage Tank Replacement Project. The project encompasses comprehensive engineering and design services necessary to close an existing underground storage tank (UST) and replace it with an above ground storage tank (AST) system. The scope of work includes site assessment, regulatory compliance documentation, permitting coordination with appropriate agencies, design development, and engineering drawings and specifications required for construction. The project requires the selected consultant to prepare all necessary plans, reports, and permits to facilitate the closure of the UST in accordance with applicable state and federal regulations and to design the AST replacement system to meet current standards and local requirements.

The document establishes the technical and administrative requirements for the consultant's performance, including responsibilities for environmental site assessment, regulatory agency coordination, design specifications, and permit acquisition. The work requires coordination with the California Department of Resources Recycling and Recovery (CalRecycle) and other relevant regulatory agencies to ensure compliance with underground storage tank closure regulations. The consultant must prepare comprehensive design documentation, including site plans, engineering drawings, material specifications, and construction details necessary for the AST installation. All work must be performed in accordance with applicable California Environmental Quality Act (CEQA) requirements and local building codes. The project deliverables must be submitted in formats acceptable to the City for review and approval prior to the commencement of construction activities.