EDR.pdf
PDF 105 KB Posted
- Attached to
- F-16 Cell, Fuel, Aircraft
- Solicitation number
- SPRHA4-26-R-0081
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is an Engineering Data Requirements attachment for a fuel tank manufactured for a fuselage single-place aircraft, forward removal. The specific part number is 16VB004001-3, with National Stock Number 1560-01-322-9987WF. The document primarily focuses on Item Unique Identifier (IUID) marking requirements, specifying detailed guidelines for labeling, including:
Contractors must create labels with both human-readable (minimum 1/8 inch lettering) and machine-readable (minimum 1/4 inch square 2D matrix) identifiers. The required markings must include CAGE code (17V), Part Number (1P), and Serial Number (IS). Additional requirements mandate that the IUID marking be permanent, highly visible, and easily accessible, following standards like MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418. Deviations from specifications are not authorized without prior approval from OO-ALC Engineering.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA426R0081_______0001.pdf | ||
| CDRLFATR.pdf | ||
| SPI.pdf | ||
| Unmarked Eng Data.pdf | ||
| SOW.pdf | ||
| MQR.pdf | ||
| EDL.pdf | ||
| SPRHA426R0081.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
FUEL TANK, FUSELAGE SGL PL ACFT, FWD REM
2. PART NUMBER:
16VB004001-3
3. NATIONAL STOCK NUMBER:
1560-01-322-9987WF
PREPARED BY:
DONALD WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
10/2/2018
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
8. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE
EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
File details come from the government source that posted it. Updated .