EDR.pdf
PDF 74 KB Posted
- Attached to
- 1650-01-417-8525 (25-R-0264)
- Solicitation number
- SPRHA4-25-R-0264
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements (EDR) document specifying manufacturing requirements for a hydraulic nose gear door actuator assembly (Part Number 16VH202-3, NSN 1650-01-417-8525WF) for the Defense Logistics Agency Aviation. The document outlines key manufacturing specifications and marking requirements, including part marking per MIL-STD-130 instead of FPS-3008, and IUID marking requirements per Drawing 1211179, EO 12C3284-H.
The related solicitation SPRHA4-25-R-0264 seeks to procure 28 units of this component, which is described as a power distribution panel for the F-16 aircraft. The document explicitly states that military specifications and standards will not be furnished in the bid set, and any deviations from control drawing specifications require prior approval from 416 SCMS Engineering.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA4-25-R-0264 CUI.pdf | ||
| PackagingSOW.pdf | ||
| MQR.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR ASSY-HYD,NOSE GEAR DOOR
2. PART NUMBER:
16VH202-3
3. NATIONAL STOCK NUMBER:
1650-01-417-8525WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
2/22/2021
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY 416 SCMS ENGINEERING.
7. PART MARKING PER MIL-STD-130 IN LIEU OF FPS-3008
8. MARK IUID PER DRAWING 1211179, EO 12C3284-H.
File details come from the government source that posted it. Updated .