EDR.pdf
PDF 124 KB Posted
- Attached to
- F-16 Control Unit, Electronic
- Solicitation number
- SPRHA4-24-Q-0979
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is an Engineering Data Requirements (EDR) attachment related to the manufacture of a Control Unit, Gun for the F-16 aircraft. It provides detailed technical instructions and requirements for the part, including the part number, national stock number, and required marking and identification per military standards. The document specifies that the sources/materials listed on the associated drawings and specifications are the only approved sources, and that deviations require prior approval. It also requires the contractor to have a Counterfeit Parts Prevention Plan in accordance with AS5553 to avoid, detect, and mitigate counterfeit electronic parts. This EDR is attached to a federal contract opportunity for the F-16 Control Unit, Electronic with Solicitation Number SPRHA4-24-Q-0979, issued by the Defense Logistics Agency Aviation.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA424Q0979.pdf | ||
| EDL.pdf | ||
| CDRLCPP.pdf | ||
| SOW.pdf | ||
| MQR.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CONTROL UNIT‐GUN. F‐16
2. PART NUMBER:
16VS003001‐2
3. NATIONAL STOCK NUMBER:
1005‐01‐055‐7373WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
4 MARCH 2020
HILL AFB FORM 462 Page 1 of 2
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA
WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING
ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL‐STD‐130 IN LIEU OF FPS‐3008.
8. IUID PART MARKING IS REQUIRED FOR THIS ITEM. MARK PER THE FOLLOWING REQUIREMENTS:
‐ F‐16 AIRCRAFT CONTROLLER SENSOR ASSEMBLY (PN 11217‐2) SHALL BE MARKED WITH A UNIQUE ITEM IDENTIFIER
(UII). (REF: MIL‐STD‐130)
‐ IF NO UII MATRIX IS PRESENT, FABRICATE NEW IDENTIFICATION PLATE (200945069‐501) AND ATTACH TO THE EXISTING IDENTIFICATION PLATE/LABEL, TO THE RIGHT OF THE "NSN" AND "CONTR" BLOCKS. DO NOT COVER ANY
EXISTING INFORMATION
‐ THE NEW UID IDENTIFICATION PLATE WILL BE LOCATED ON THE EXISTING PLATE/LABEL AS SHOWN ON THE NEXT
PAGE.
‐ UID LABEL P/N 200945085‐005A IS AN ACCEPTABLE ALTERNATE
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CONTROL UNIT‐GUN. F‐16
2. PART NUMBER:
16VS003001‐2
3. NATIONAL STOCK NUMBER:
1005‐01‐055‐7373WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
4 MARCH 2020
HILL AFB FORM 462 Page 2 of 2
9. CONTRACTORS THAT SUPPLY ELECTRONIC PARTS OR SYSTEMS THAT CONTAIN ELECTRONIC PARTS SHALL ESTABLISH POLICIES AND PROCEDURES TO AVOID, DETECT, MITIGATE AND DISPOSITION COUNTERFEIT ELECTRONIC PARTS TO PREVENT SUCH PARTS FROM ENTERING THE USAF/DOD SUPPLY CHAIN. THESE POLICIES AND PROCEDURES SHALL BE DOCUMENTED IN A COUNTERFEIT PARTS PREVENTION PLAN (CPPP) IN ACCORDANCE WITH (IAW) DATA ITEM DESCRIPTION (DID) DI‐MISC‐81832 OR SIMILAR DOCUMENT (E.G., EXISTING COMPANY COUNTERFEIT PARTS PREVENTION POLICIES/PLANS) AS REQUIRED BY THIS CONTRACT.
THE CONTRACTOR SHALL ACCOMPLISH THE POLICIES AND PRACTICES IDENTIFIED IN THE CPPP FOR ALL ACTIVITIES ASSOCIATED WITH THIS CONTRACT. THE REQUIREMENTS ESTABLISHED BY THE CPPP ALSO APPLY TO ELECTRONICS COMPONENTS PROCURED IN SUSTAINMENT (E.G., REPAIR) OF SUCH SYSTEMS AND ASSEMBLIES. THE REQUIREMENTS OF THE DOD‐ADOPTED SAE 5553 (AS5553), AEROSPACE STANDARD, COUNTERFEIT ELECTRONICS PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION SHALL APPLY TO THIS CONTRACT. REPORTING IAW AS5553, 4.1.7, SHALL INCLUDE NOTIFICATION TO THE
CONTRACTING OFFICER OF THIS CONTRACT.
File details come from the government source that posted it. Updated .