EDR.pdf

HILL AFB IMT 462, 20060123, V1 Page 1 of 2

REVISION

ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF

COMPUTER, BOMB-NAVIGATION

2. PART NUMBER

16VE964003

3. NATIONAL STOCK NUMBER

1280-01-481-5723WF

4. The following specifications/standards will be used in lieu of the data indicated. The superseded data will not be furnished unless so indicated.

5. The Sources/Materials if listed on the specification, standards and drawings are the only sources/materials for those items. Any substitutions shall have prior approval by the cognizant OO-ALC engineering activity.

6. Deviations from specifications identified in control drawings are not authorized without prior approval from OO-ALC Engineering.

7. Part Marking as per MIL-STD-130.

8.1 Effective 9 May 2005 the Department of the Air Force issued an Air Worthiness Advisory (M-05-01) regarding the use of lead-free solder in electrical and electronic military products. To date, no lead-free solder formulation has matched the reliability and performance qualities of the standard leaded solders.

Therefore, until such time as a suitable, reliable lead-free solder replacement is identified, all electronic equipment suppliers shall continue to provide the Department of the Air Force with items which meet all performance, compatibility, and reliability standards previously established with leaded solders. Failure to do so, could adversely impact the performance and reliability of weapon systems affecting National Security.

8.2 The use of lead-free solder or lead-free plated components in military electronic products is considered a flight safety and national security concern. For this reason the US Air Force wants to be notified when lead-free components and manufacturing processes have been implemented. As part of satisfactory compliance with the requirements of this contract the US Air Force requires notification on a no-cost basis when any of the following conditions exist:

1. Commercial Off-the-Shelf (COTS) or any other electrical components that contain lead-free solder or lead-free plated components are used in the end-item.

2. Any lead-free component or part used to manufacture the end item that is not identified with a separate part number or designation.

8.3 If no lead-free, lead-free plated COTS or any other lead-free electrical or electronics components exist in the manufactured end-item, the contractor shall provide written certification of compliance as a deliverable with the contract.

1. Use industry standard IPC-1066, "Marking, Symbols and Labels for Identification of Lead-Free and Other Reportable Materials in Lead-Free Assemblies, Components and Devices,"

2. Include the program engineer's evaluation of the purchasing/repair item for any "lead-free" military part(s) in reference to its' reliability, performance and compatibility for the system.

8.4 POC for this matter is the Engineering Support Activity (ESA).

9. Unique identification (UID) shall be applied to each part per MIL-STD-130. The UID shall be a machine-readable information (MRI) mark. The MRI shall be accompanied by a Human-Readable Information (HRI) marking which is limited to 16 alphanumeric characters including the vendor cage (FSCM) of the contractor named on the contract, date of manufacture in the format MMYY, and a unique 4 digit number starting with 0001 in a numerical order of manufacture. The HRI shall appear as “SN 8175501090001”. The height of each alphanumeric character shall be a maximum of .125 inches.

10. The requirements established by the contractors internal Counterfeit Protection Plan (CPP) process apply to all electronic components procured under this contract/purchase order/order. At a minimum the contractors internal CPP process shall meet the requirements of the DoD-adopted SAE 5553 (AS5553), Aerospace Standard, Counterfeit Electronics Parts; Avoidance, Detection, Mitigation, and Disposition shall apply to this contract.

Reporting IAW AS5553, 4.1.7, shall include notification to the DLA Aviation, Ogden Administrative Contracting Officer.”

HILL AFB IMT 462, 20060123, V1 Page 2 of 2

PREPARED BY

Jed Foy

SYMBOL

GUMEAA

DATE

20190110