EDR_CUI.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

GRIP ASSEMBLY, PILOTS CONTROLLER F-16

2. PART NUMBER:

16C1090-1

3. NATIONAL STOCK NUMBER:

1680-01-263-0648WF

PREPARED BY:

SCOTT WALKER

OFFICE SYMBOL:

416 SCMS / GUEAA

DATE:

20220808

HILL AFB FORM 462 Page 1 of 2

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE

SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT

ENGINEERING ACTIVITY.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR

APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.

7. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.

8. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL-STD-2000 THAT APPLIES TO AIRCRAFT SOLDERING FOR ALL SOLDERING REQUIREMENTS. *NOTE: J-STD-001 MAY BE USED IN LIEU OF MIL-STD-2000, IS

SPECIFICATION MEETS OR EXCEEDS MIL-STD-2000.

8.1 EFFECTIVE 9 MAY 2005 THE DEPARTMENT OF THE AIR FORCE ISSUED AN AIR WORTHINESS ADVISORY (M-05-01) REGARDING THE USE OF LEAD-FREE SOLDER IN ELECTRICAL AN ELECTRONIC MILITARY PRODUCTS. TO DATE, NO LEAD-FREE SOLDER FORMULATION HAS MATCHED THE RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD LEADED SOLDERS. THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE, LEAD-FREE SOLDER REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE AIR FORCE WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATABILITY AND RELIABILITY STANDARDS PREVIOUSLY ESTABLISHED WITH LEADED SOLDERS. FAILURE TO DO SO, COULD ADVERSELY IMPACT THE

PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING NATIONAL SECURITY.

8.2 THE USE OF LEAD-FREE SOLDER OR LEAD-FREE PLATED COMPONENTS IN MILITARY ELECTRONIC PRODUCTS IS CONSIDERED A FLIGHT SAFETY AND NATIONAL SECURITY CONCERN. FOR THIS REASON THE US AIR FORCE WANTS TO BE NOTIFIED WHEN LEAD-FREE COMPONENTS AND MANUFACTURING PROCESSES HAVE BEEN IMPLEMENTED, AS PART OF SATISFACTORY COMPLIANCE WITH THE REQUIREMENTS OF THIS CONTRACT, THE US AIR FORCE REQUIRES

NOTIFICATION ON A NO-COST BASIS WHEN ANY OF THE FOLLOWING CONDOTIONS EXIST:

1. COMMERCIAL OFF-THE-SHELF (COTS) OR ANY OTHE ELECTRICAL COMPONENTS THAT CONTAIN LEAD-FREE SOLDER

OR LEAD-FREE PLATED COMPONENTS ARE USED IN THE END-ITEM.

2. ANY LEAD-FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED WITH A

SEPARATE PART NUMBER OR DESIGNATION.

8.3 IF NO LEAD-FREE, LEAD-FREE PLATED COTS OR ANY OTHER LEAD-FREE ELECTRICAL OR ELECTRONICS COMPONENTS EXIST IN THE MANUFACTURED END-ITEM, THE CONTRACTOR SHAL PROVIDE WRITTEN CERTIFICATION

OF COMPLIANCE AS A DELIVERABLE WITH THE CONTRACT.

1. USE INDUSTRY STANDARD IPC-1066, “MARKING, SYMBOLS AND LABELS FOR IDENTIFICATION OF LEAD-FREE AND

OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES.”

2. INCLUDE THE PROGRAM ENGINEER’S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY “LEAD-FREE” MILITARY PART(S) IN REFERENCE TO IT’S RELIABILITY, PERFORMANCE AND COMPATABILITY FOR THE SYSTEM.

9. 16PR106 IS NOT FURNISHED, BRAID PER 16PR8817 IF APPLICABLE.

10. USE 16PR8817 IN CONJUNTION WITH 16PR145 FOR THE MANUFACTURING IF THIS ITEM.

CUI

Controlled by: DLA Aviation Ogden

Controlled By: AUBA CUI Category: Controlled Tech info

Distribution/ Dissemination Control: FEDCON POC: scottina.malia@us.af.mil

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

GRIP ASSEMBLY, PILOTS CONTROLLER F-16

2. PART NUMBER:

16C1090-1

3. NATIONAL STOCK NUMBER:

1680-01-263-0648WF

PREPARED BY:

SCOTT WALKER

OFFICE SYMBOL:

416 SCMS / GUEAA

DATE:

20220808

HILL AFB FORM 462 Page 2 of 2

11. 16PR145, REVISION “G”, PAGE 9, PARAGRAPGH 3.2.3.2, REFERING TO THE USE OF WHITE TUBING, DOES NOT APPLY TO

THE MANUFACTURE OF THIS ITEM.