EDR_CUI.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

FLAP,WING-LEADING EDGE, ASSY OF F-16

2. PART NUMBER:

16W022-890

3. NATIONAL STOCK NUMBER:

1560-01-506-1768WF

PREPARED BY:

RAYMOND PARK

OFFICE SYMBOL:

416 SCMS/GUEAA

DATE:

20210115

HILL AFB FORM 462 Page 1 of 1

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE

SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT

ENGINEERING ACTIVITY.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR

APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.

7. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.

8. USE MATERIAL PER SAE AMS-QQ-A-250/( ) IN LIEU OF QQ-A-250/( ).

9. 16PR100 IS NOT REQUIRED FOR MANUFACTURING AND WILL NOT BE FURNISHED.

10. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA 16W043-138, 16W329-8, 16W370-9 AND 16W391-8 FOR MANUFACTURE.

CUI

CUI