DRAFT Statement of Work.docx

16 KB Posted

Attached to
100-Foot THOF-500E Shore Power Cables
Solicitation number
N6896722RC0062C
Issued by

About this file

Written by GovTribe AI ·

This sources sought notice is requesting capability statements from small businesses for the manufacture of 100-foot shore power cables. Interested vendors should demonstrate their ability to produce cable assemblies in accordance with specification MIL-DTL-915G, using cable rated at 600V and connectors meeting MIL-C-24368. Capability statements are due by April 20th, 2022 and should provide company information and details of relevant past experience manufacturing similar cable products for military or commercial clients. The solicitation will be awarded as a single-award fixed price supply contract by the Naval Supply Systems Command to support Naval Base Kitsap in Bangor, Washington.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SHORE POWER CABLE ASSEMBLIES

DRAFT STATEMENT OF WORK

1. GENERAL DESCRIPTION: Shore Power Cable Assemblies. Contractors are responsible for compliance with all applicable Federal, State, and local requirements.

2. APPLICABLE DOCUMENTS: The following documents form a part of this specification. Unless otherwise indicated, the current revision, as of Date of Award shall apply.

Military Specification can be found at the following site: http://quicksearch.dla.mil/ MIL-DTL-915G - Cable, Electrical, for Shipboard Use, General Specification MIL-C-24368 – Connector Assemblies; Plugs and Receptacles, Electric Power Transfer, Shore To Ship and Ship to Ship QPL-915 - Qualified product list of products qualified under performance specification MIL-DTL-915 cable, electrical, for shipboard use

3. DESCRIPTION:

0. Cable Assemblies with Male Connector on one end and Female Connector on the other end, 15 each 100-foot length. Each Shore Power Cable assembly consists of:

0. 100-foot Cable, Government Designation Part Number: THOF-500E, in accordance with MIL-DTL-915G. Manufacturer must be on QPL-915, or current revision, as of Date of Award. Cable to be rated at 600 volt service to be operated at 450 volts, 3 phase, 60 hertz.

0. Connector, Cooper Crouse Hinds Joy In-Line Shore/Power Connectors (complete w/caps), Government Designation Part Number: X8998-1 Male In-Line with caps.

0. Connector, Cooper Crouse Hinds Joy In-Line Shore/Power Connectors (complete w/caps), Government Designation Part Number: X8998-2 Female In-Line with caps.

0. Connectors to be installed on cable and tested in accordance with MIL-C-24368.

4. CERTIFICATIONS REQUIRED:

4.1Certification to confirm that cable assembly is manufactured per MIL-DTL-915G.
4.2Certification to confirm that cable assembly manufacturers are on QPL-915.
4.3Certification to confirm that cable assembly is in accordance with MIL-C-24368.

5. RESTRICTED USE OF COLORS:

0. The Navy uses the colors yellow, blue, and red to identify specifically controlled materials. These colors are not to be used for any other purpose. Yellow plastic tape, bags, coverings, or other wrapping materials are strictly prohibited. Blue must be used for asbestos identification only and clearly identified as asbestos. Red must be used only for Infectious Medical Waste and clearly identified as such.

File details come from the government source that posted it. Updated .