Draft SOW .pdf

Measurement Science and Engineering Department

Precision Pressure Standard

1. INTRODUCTION

The Naval Sea Systems Command (NAVSEA) Metrology and Calibration (METCAL) Program provides calibration standards to the depot level and intermediate calibration laboratories to verify the operation of naval aviation support equipment across the fleet. The King Nutronics (King) model number (M/N) 3689A is capable of providing inter-service calibration workload for United

States Air Force and Marine Corp. Test instrument (TI) workload, sent to NAVSEA calibration labs in support of interoperability among service calibration laboratories by the Naval Surface

Warfare Corona Division (Corona Division) Measurement Science (MS) Department.

2. BACKGROUND

The Precision Pressure Standards used at intermediate level and depot level calibration laboratories verify the accuracy and precision of TIs such as, but not limited to dial pressure gages and digital pressure measurement devices. Repair of these legacy units is not viable option. NSWC Corona, MS Department has identified model number (M/N) 3689A as a commercially available system capable of accommodating in excess of 22,000 hours of annual workload for the Precision Pressure Standard Systems in the Fleet inventory. Furthermore, M/N 3689A meets the requirements of the recent and anticipated TI workload added into the Naval Air Systems Command inventory.

3. SCOPE

The scope of this effort is to procure up to 50 King M/N 3689A.

4. APPLICABL DOCUMENTS

Document

Type

No. Version Title Date

Military

Specification

MIL-PRF-28800 F Test Equipment for use with Electrical and Electronic

Equipment General Specification.

http://assist.daps.dla.mil/quicksearch/

Jun

Military

Standard

MIL-STD-130 N Identification Marking of US Military Property http://docimages.assistdocs.com/watermarker/transient/F82EC5

9582A0412A98E88339010F71E5.pdf

Nov http://assist.daps.dla.mil/quicksearch/ http://docimages.assistdocs.com/watermarker/transient/F82EC5

5. REQUIREMENTS

5.1 The Contractor shall provide Operator/Service Manual(s) (CDRL T001). Technical manuals describing how to operate the M/N 3689A shall have information on operator safety, operating procedures for the system and preventative maintenance. Service manuals shall contain information on safety for servicers of the M/N 3698A and instructions on repairing and maintaining components the Original Equipment Manufacturer (OEM) designates as user serviceable. Technical manual(s) for the operation and/or service of the M/N 3698A Precision

Pressure Standard shall be provided in accordance with (CDRL T001).

5.2 The Contractor shall provide a Calibration Certification with Report and/or Certificate of

Conformance Report with calibration data in accordance with (CDRL A001).

5.3 The Contractor shall provide the Original Equipment Manufacturers (OEM) Instrument

Calibration Procedure (ICP) for calibrating M/N 3689A in accordance with (CDRL A002).

5.4 The Contractor shall provide firmware and software used to operate each calibration standard procured on any individual delivery of the same release and version. No deviation or substitution of firmware and/or software shall submitted without the approval of the Government.

The Contractor shall provide the Government the release and/or version number of each item of firmware and software included in the calibration standard in accordance with (CDRL A003), Software/Firmware Version Description.

5.4.1 If an item of firmware or software needs to be changed, a Software/Firmware Change

Request shall be submitted to the Government in accordance with (CDRL A004).

5.5 The Contractor shall provide a Repairable Parts list to the Government for each standard installed. (CDRL A005)

5.6 The manufacturer shall provide the minimum commercial warranty for the calibration standard of at least one (1) calendar year from date of shipment.

5.7 The Contractor shall ensure each calibration standard will have a sticker affixed to the outside of the unit enclosure.

6. GOVERNMENT FURNISHED PROPERTY

N/A

6.1 Government Furnished Material

6.2 Government Furnished Equipment

6.3 Government Furnished Information

7. DELIVERABLES

Number Name DID A001 Calibration Certification with Report and/or

Certificate of Conformance Report

DI-QCIC-80798C

A002 Instrument Calibration Procedure (ICP) DI-QCIC-8110

A003 Software/Firmware Version Description DI-IPSC-81442A

A004 Software/Firmware Change Request DI-MISC-81807

A005 A Repairable Parts list DI-PSSS-80134B

T001 Operator/Service Manual(s) DI-TMSS-80527C