DRAFT Purchase Description 0197.docx

pURCHASE DESCRIPTION

HEADER

1. INTRODUCTION

The Naval Surface Warfare Center (NSWC), Corona Division, Measurement Science & Engineering Department, Interface Engineering & Assessment Division (MS20) requires Heat Sink, Mechanical Electronic Box (MEB)/Hazard Electronic Box (HEB) (Drawing Number: 8660481) for the Vertical Launching System (VLS).

2. BACKGROUND

Naval Sea System Command (NAVSEA) Integrated Weapons System (IWS) Code 3L has a requirement to procure Heat Sink, MEB/HEB (Part Number: 8660481-1). These parts will be installed in the MEB and HEB of the VLS.

3. REQUIREMENTS

· Local Vendor request: There will be a geographical restriction due to periodic assessments on the machining to be performed for this equipment. In order to meet the Governments minimum needs, quality/calibration tests may need to be performed throughout the material manufacturing. Having the ability to routinely provide on-site inspections will mitigate specific risks such as misalignments and “out of tolerance” calibration issues. Another value added benefit is to reduce measurement errors by having quality control during the lifecycle of the manufacturing which will increase accuracy and decrease uncertainty.

Payment methods: Payment cannot be made until after the Navy Gage Laboratory has had 45 days to inspect the material manufactured by the offeror to validate the materials are acceptable.

Contractor shall deliver parts completed per the drawings:

DRAWING

DESCRIPTION

QTY

8660481 Chassis, Side Assembly (Part Number: 8660481-1)

Option Quantity:

DRAWING

DESCRIPTION

QTY

8660481 Chassis, Side Assembly (Part Number: 8660481-1)