SPECS_Butterfly_Valve_180724.docx

21 KB Posted

Attached to
Butterfly Valve
Solicitation number
DPGCTDTS180724a
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Description for Butterfly Valves with Actuators

Three butterfly valves complete with actuators are required; a 4” valve, a 6” valve, and an 8” valve. Other than the size, the requirements are the same for all of the valves and actuators. Valves and Actuators are to be made in the USA.

Valve Description:

Butterfly valve with all 316L stainless steel construction and integral sanitary tri-clamp ends. Seals/seats to be EPDM. The maximum distance between the inlet and outlet faces is 5” for the 4” valve, 6” for the 6” valve, and 6-5/8” for the 8” valve.

Actuator Description:

Pneumatic positioning actuator with electro-pneumatic modulating positioner with 4-20 mA control, 4-20 mA transmitter, and 2 limit switches. All mounting hardware to be stainless steel. Actuator to be mounted on butterfly valve and fully tested.

Suggested source is Valtorc USA. Valtorc part numbers are:

4” Valve and Actuator: 530SN-TC-SS316-VT83DA-VP900D-SSMK 6” Valve and Actuator: 530SN-TC-SS316-VT105DA-VP900D-SSMK 8” Valve and Actuator: 530-SN-TC-SS316-VT140DA-VP900D-SSMK

File details come from the government source that posted it.