DOTD Specification 196-035, Rev. 9-10-2009.pdf
PDF 16 KB Posted
- Attached to
- DOTD PVC & Duct(S45)
- Solicitation number
- 3000026541
- Issued by
- Louisiana
About this file
This is a specification document from the Louisiana Department of Transportation and Development (DOTD) for PVC and duct products. The specification, numbered 196-035 (Revision 9-10-2009), establishes the technical requirements and standards for polyvinyl chloride (PVC) and associated duct materials used in state transportation projects. The document outlines detailed product specifications, material standards, performance requirements, and quality control measures that suppliers and contractors must meet when providing these materials to DOTD. The specification serves as the governing technical standard for all PVC and duct procurement under the related state contract opportunity designated as DOTD PVC & Duct (S45).
The specification document establishes mandatory compliance criteria for PVC products and ducts, including material composition, dimensional tolerances, durability standards, and testing procedures required for acceptance into the DOTD supply chain. Suppliers bidding on PVC and duct contracts must demonstrate that their products meet or exceed all standards outlined in this specification to be eligible for award. The document functions as a baseline requirement that ensures consistency, quality, and performance across all PVC and duct materials procured by Louisiana's transportation department.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| U.S. Preference(2019).pdf | ||
| 3000026541.pdf | ||
| Louisiana Preference(2019).pdf | ||
| DOTD Specification 196-034, Rev. 1-4-2016.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sap Material Master Numbers DOTD Spec. 196-035 See Below Rev. 9/10/2009 2 Pages
LOUISIANA
DEPARTMENT OF TRANSPORTATION AND DEVELOPMENT
SPECIFICATIONS
CONDUIT AND FITTINGS, PVC,
FOR ELECTRICAL WIRING
DESCRIPTION:
The conduit shall be manufactured of virgin polyvinyl chloride. The conduit and fittings shall meet the latest standards of UL and NEMA and shall be rated for 90° C cable.
Conduit and fittings shall be sunlight resistant.
DIMENSIONS:
The dimensions of the conduit shall be as follows:
Size OD Min. Wall Thickness 1 Inch, Schedule 80 1.315 Inch 0.179 Inch 2 Inch, Schedule 80 2.375 Inch 0.218 Inch 3 Inch, Schedule 80 3.500 Inch 0.300 Inch
INSTALLATION:
Conduit and fittings shall be capable of being direct buried or encased in concrete with no special consideration to using selective backfill. No negative effects on performance or to the contents shall be experienced in either of these applications.
Conduit and conduit fitting as shown below:
SAP MATERIAL MASTER NUMBERS
10677 (12-50-0005) 1 inch PVC conduit, Schedule 80, bell end, ten foot length, Cantex
No. A53BA12, or equal
10678 (12-50-0010) 2 inch PVC conduit, Schedule 80, bell end, ten foot length, Cantex
No. A53CA12, or equal
10679 (12-50-0015) 3 inch PVC conduit, Schedule 80, bell end, ten foot length, Cantex
No. A53DA12, or equal
10680 (12-50-0017) 2 inch PVC pipe end cap, Carlon No. E958J, or equal
10681 (12-50-0018) 3 inch PVC pipe end cap, Carlon No. E958L, or equal
10682 (12-50-0020) 1 inch Schedule 80, standard radius 90° elbow, radius 5 ¾ inch, plain end, Cantex No. 5121055, or equal
10683 (12-50-0025) 2 inch Schedule 80, standard radius 90° elbow, radius
9 1/2 inch, plain end, Cantex No. 5121058, or equal
10684 (12-50-0030) 3 inch Schedule 80, standard radius 90° elbow, radius 13 inch, plain end, Cantex No. 5121060, or equal
10685 (12-50-0035) 1 inch Schedule 80, standard radius 45° elbow, radius 5 3/4 inch, plain end, Cantex No. 5121005, or equal
10686 (12-50-0040) 2 inch Schedule 80, standard radius 45° elbow, radius
9 1/2 inch, plain end, Cantex No. 5121008, Carlon No. UB7AJ, or equal
10687 (12-50-0045) 3 inch Schedule 80, standard radius 45° elbow, radius
13 inch, plain end, Cantex No. 5121010, Carlon No. UB7AL, 10688 (12-50-0050) 1 inch couplings, Cantex No. 6141625, Carlon No. E940F, 10689 (12-50-0055) 2 inch couplings, Cantex No. 6141628, or equal
10690 (12-50-0060) 3 inch couplings, Cantex No. 6141630, Carlon No. E940L, or equal
10691 (12-50-0065) 1 inch molded end bell, length 1 1/4 inch, Cantex No. 5144005, Carlon No. E997F-CAR, or equal
10692 (12-50-0070) 2 inch molded end bell, length 1 7/8 inch, Cantex No. 5144008, Carlon No. E997J-CAR, or equal
10693 (12-50-0075) 3 inch Schedule 80, molded end bell, length 2 1/4 inch, Cantex No.
5144010, Carlon No. E997L-CAR, or equal
10694 (12-50-0080) Cement glue for PVC connections, 1 pint, Cantex No. 7210412, Carlon No. VC9983, or equal
| Min. Wall Thickness |
| OD |
| Size |
File details come from the government source that posted it. Updated .