Attachment_1_-_Bell_429_Accessories_and_Minor_Mods.pdf
PDF 72 KB Posted
- Attached to
- Helicopter Modernization Plan
- Solicitation number
- DJF-18-2200-000B429
About this file
Attachment 1 - Bell 429 Accessories and Minor Mods
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 1: Bell 429 Accessories / Minor Modifications Solicitation: # DJF-18-2200-000B429
Below is the itemized list of mandatory requirements and optional specifications for each Bell 429 Helicopter required under solicitation DJF-18-2200-000B429. Item #3 requires a Supplemental Type Certificate (STC).
MANDATORY REQUIREMENTS
1. Bell 429 current year of production or undelivered former year of production with full factory warranty.
2. Dual pilot equipped for IFR operations to include a four axis auto pilot.
3. Aeronautical Accessories retractable hard point kit. This kit will include a provision letter of authorization to increase weight limitation on a single side to 360 lbs.
4. Nav/Com/GPS- GTN 750/650 Garmin.
5. Rotor brake provisions and equipment.
6. C406 Emergency Location Transmitter.
7. Air Conditioner provisions and dual evaporator manual controls equipment.
8. Inlet Barrier Filter provisions and equipment complete.
9. Wire Strike provisions and equipment (upper and lower)
10. 200 Amp Starter Generator (dual).
11. Bleed Air heater provisions and equipment.
12. Compressor Wash Kit.
13. Rescue hoist provisions only.
14. Door openers for crew and passenger hinged doors.
15. GPS GTN 750 HTAWS upgrade.
16. Emergency Egress- standard interior (pushout windows for passenger hinged doors).
17. Radar Altimeter – Antennas to be located under fuselage nearest to retractable hard point location and not the tail boom.
18. Standard passenger 6 place seating.
19. NVG Covert IR formation lighting system.
20. NVG STC for interior/exterior as appropriate.
21. Eagle P139HD digital audio control system, pilot, copilot, aft cabin with four lapel drops.
22. Jettison Crew doors (LH/RH).
23. Marker Beacon.
24. Installation and wiring for Technisonic TDFM 9200 radio and installation with the following configuration:
a. Module # 1 APX-8000 Module, will support all FM P25 bands VHF 136-174MHz, UHF 380- 520MHz, 7-800 764-870MHz, Provisioned for trunking, Encryption, Front Panel Programming.
b. Module # 2 APX-8000 Module, will support all FM P25 bands VHF 136-174MHz, UHF 380- 520MHz, 7-800 764-870MHz, Provisioned for trunking, Encryption, Front Panel Programming.
c. Module # 3 Low Band 30-50MHz will support the FM low band, Front panel programming.
d. Module # 4 Military UHF AM 225-400MHz.
25. Black, non-reflective interior and trim.
26. Black non reflective main rotor blades (bottom only if necessary).
27. Garmin GDL 69A receiver.
28. Cabin floor protective covering with slip resistant surface.
29. Original (B412) crew seats.
30. Garmin GTX 345R transponder.
31. Single Blue green dome light in cabin switchable from cockpit.
32. PW207 D2 engines with combined MGT martin of at least +60 degrees Celsius or better on Power Insurance check to utilize Bell FMS-25 performance charts.
33. Warranty period for basic aircraft and any customization.
34. Two color exterior paint (scheme and color to be determined after purchase).
35. Any pilot or mechanic training included in purchase price.
OPTIONAL ELEMENTS (PLEASE ITEMIZE THE PRICES OF THESE ITEMS. PRICE EVALUATION WILL NOT
INCLUDE THESE ITEMS).
36. 12 volt outlet crew area.
37. 12 volt outlet cabin area.
38. USB 2.5 amp outlet cabin.
39. USB 2.5 amp outlet cockpit.
40. Ipad holder copilot.
41. Ipad holder pilot.
42. Equipment and installation of optional second fire extinguisher system.
43. Equipment and installation of TACAN receiver integrated into factory EFIS.
File details come from the government source that posted it.