17_Attachment__2_Specs_Ford_F-450_Utility_Bed_Specs_(G71-0445S).docx

Statement of Work Utility Bed for Ford F-450 (Cutright – G71-0445S)

The requirement is to provide and install a utility bed on a 2016 Ford F-450 with Dual Rear Wheels. Minimum requirements are outlined below.

· 60" raised front compartments

· Power compartment locks

· 30 Pull out drawers to include:

Front bins each side: (1) 6 inch drawer, (2) 4 inch drawers, (4) 3 inch drawers Middle bins each side: (1) 4 inch drawer Rear bins each side: (1) 6 inch drawer, (6) 3 inch drawers

· HD overhead rack with window guard, enclosed over cab, swing away center bar, 4 strap ratchets and various round stock tie-offs

· LED compartment lights, (2) LED area lights, (1) Go-light, LED STT lights, and (2) tailboard flush mounted strobe lights

· Rear storage Bumper with work platform

· Tail lights mounted high on bin and flush mounted into rear bin wall

· Full size vise mount on rear work platform

· (3) Rows of E series logistical track on each inside wall

· Install provided inverter, outlets in each horizontal compartment

· Also include Troy Products Console installed and Kenwood DNX573S Touch Display installed

· Spray on liner

· Powder coat white

· Truck bed fabricated as one piece 12 GA steel.

· The entire truck bed shall have a based on powder coating.

· The bidder shall supply a detailed 3D drawing of the proposed truck bed along with their bid.

· The vendor shall be responsible for the pickup of the chassis and delivery of the completed unit.