Description of Requirement.pdf

Description of Requirements for Purchase of a Bobcat Telehandler

ERDC Environmental Laboratory, Environmental Processes Branch, requires a Bobcat Telehandler.

The EL requirement is to obtain a Bobcat Telehandler to replace an existing Bobcat Telehandler that is no longer serviceable. The new telehandler must be manufactured by Bobcat because ERDC currently owns attachments that are designed for the Bobcat V519.

The Bobcat Telehandler must be a V519 and should include these accessories:

• 86” Severe Duty Bucket

• 5.5K Severe Duty Pallet Fork Frame with a 48” 5.5K Severe Duty Pallet Fork Teeth

The V519 telehandler should include:

• Automatic tilt leveling

• Two-stage, low profile boom,

• Low cab height

• Hydrostatic transmission

• Turbo-charged liquid cooled engine, deep attachment dumpling angle

• Eco-mode that can be toggled on/off

• 20 inch diameter tires with aggressive all-terrain treat,

• Boom float

• Full height lift capacity of 5,500 pounds

• Three steering modes (all-wheel, front-wheel, crab)

• 2-speed travel with speed management

• Inching control

• Bob-tach attachment mounting system

• Protective chassis

• Sealed engine compartment

• Side-by-side cooling design

• Reversing fan

• Protected cylinders

• Fine mesh intake screen

• Poly fuel tank

• Non-DPF tier 4 engine

• Battery run-down protection

• Machine shutdown protection

• Impact resistant engine access panel

• Window guards

• Heavy-duty engine mounts and compartments

• Reinforced heavy-duty boom pivot

• Enclosed frame welds

• Max reach = 123.3 inches

• Bucket dump height 153.5 inches

• Fuel = diesel

• 30.4 gallon fuel tank

• 74 horse power

Delivery Location:

USACE ERDC

3909 Halls Ferry Road Vicksburg, MS 39180

Estimated Delivery Date: September 30, 2020 or before.