Crane_Project_Requirements_FRA-665-3.pdfCrane_Project_Requirements_FRA-665-3.pdf

This is a Crane Project Requirements document for the State of Ohio, specifically for crane services needed in Darydale, Ohio under RFQ-2141. The project requires crane and operator rental with a working radius sufficient to set reinforced concrete pipe (72" diameter) sections weighing approximately 15,000 lbs each into a 30-foot-wide trench extending 25 feet from the centerline of the road in each direction. The crane must have an approximate 65-foot working radius (center to center) with its rotation center positioned 25 feet west of the trench cut line, adjustable as needed. The project is located at approximately 6821 London Groveport Rd, Grove City, OH 43123, with the crane required to arrive from the west. Services must be ready to commence by 9:00 AM on or around October 23, 2026, with an estimated job duration of at least 12 hours, though actual time may vary. Contractors should contact Sam Morrison at 740-833-8023 to confirm the exact date and coordinate logistics.

The scope of work includes mobilization and demobilization of the crane, trucks, and personnel, as well as fuel and support equipment. The crane must be capable of lifting culvert sections over a communication utility line, necessitating careful coordination and clearance management. Pricing terms, specific funding sources, set-asides, and contract renewal options are not detailed in this requirements document. Prospective bidders should note the specific operational constraints and coordination requirements with project management prior to submitting proposals.