Combined Synopsis.pdf

Combined Synopsis/ Solicitation In Accordance With FAR 5.203 (a) (2), FAR 5.207 & FAR 12.603 FAR 5.203 (a) (2)

“Whenever agencies are required to publicize notice of proposed contract actions under 5.201, they must proceed as follows:

(2) Use the combined synopsis and solicitation procedure (see 12.603)

FAR 12.603 Streamlined solicitations for commercial items & FAR 5.207 Preparation and transmittal of synopsis

The Department of Homeland Security (DHS), Federal Protective Service (FPS) is soliciting quotes for deployable walk-through detection systems that are portable and can be setup with little effort in a minimum amount of time to provide security screening operations for special emergency events where enhanced screening and detection is required for the safety and security of the federal community.

Specific requirements are contained in the attached specification document. The aforementioned commercial products shall be secured through a streamlined solicitation as outlined under FAR 12.603.

As such the following synopsis information as required under FAR 5.207 is being provided:

(1) Action Code: 70RFP322QEH000018

(2) Date: 09/13/2022

(3) Year: 2022

(4) Contracting Office Zip Code: 19106

(5) NAICS Code: 334511

(6) Contracting Office Address: 701 Market Street, Philadelphia, PA

(7) Subject: Walk-Through Detection Systems

(8) Proposed Solicitation Number: 70RFP322QEH000018

(9) Closing Response Date: 09/15/2022

(10) Contact Point or Contract Specialist: Nicholas Milillo

(11) Description: Solicitation 70RFP322QEH000018 shall procure Walk-Through Detection System(s) in accordance with the attached specification document. DHS/FPS intends to award a Firm Fixed Price, Commercial Type Purchase Order in response to Request for Quote (RFQ) 70RFP322QEH000018. This requirement is not being competed. See attached sole source justification being posted in accordance with FAR 13.501(a).

(12) Place of Delivery: 6315 Brenmar Drive, Alexandria, VA 22312

(13) Delivery: No later than 70 days after award.

(14) Set- Aside Statues: None

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation: quotes are only being requested from a single source and a written solicitation is hereby included.

A complete description of the requirements briefly described herein, to include the Specification(s), terms and conditions, provisions, clauses and associated attachments are all included in the formal Request for Quote (RFQ) 70RFP322QEH000018 attached to this synopsis/solicitation announcement.

While being issued on a sole source basis, the Government will still conduct a thorough price analysis to ensure the price received is fair and reasonable.

Schedule Of Item(s) – The submission shall provide a firm-fixed price amount for the following items:

Contract Line Item Number (CLIN) 0001:

• CEIA 02PN20V3 ELLIPTIC WITH RADIATION AND MI2 SENSEOR; PART#/ID

NUMBER 02PN20V#/EZ-0010 – Quantity: 3

• WALK-THROUGH METAL DETECTOR TRANSPORT CASE/BAG; PART#/ID NUMBER

57293 – Quantity: 3

• CEIA SAM D; PART#/ID NUMBER SAMD-0005 – Quantity: 2

• CEIA SAM D-X; PART#/ID NUMBER SAM DEC-UA-1100 – Quantity: 1

• The Quoter shall include itemized pricing for each item.

• The Quoter shall include specifications of all proposed equipment within its quote.

Quotations are due no later than 12:00 P.M. ET on 09/15/2022 and shall be submitted electronically to the Contracting Officer, Nicholas Milillo, at nicholas.milillo@fps.dhs.gov. Facsimile proposals are not permitted and will be disregarded if received.

mailto:nicholas.milillo@fps.dhs.gov

SPECIFICATION

I - OBJECTIVE

The purpose of this project is to acquire deployable walk-through detection systems that are portable and can be setup with little effort in a minimum amount of time to provide security screening operations for special emergency events where enhanced screening and detection is required for the safety and security of the federal community.

II - SCOPE

Contractor shall deliver, install, and provide warranty service that will provide the government technology that will be anew deployable walk-through detection systems that are portable and can be setup with little effort in a minimum amount of time to be provide security screening operations for special emergency events where enhanced screening and detection for weapons, explosives and any component parts thereof is required for the safety and security of the federal community.

III - TECHNICAL REQUIREMENTS

A. WEAPON DETECTION

1. Walk-through Metal Detectors (WTMDs) and Shoe Scanners (SS) must detect at a minimum, the items listed below, singly and in any multi-weapon combination and disassembled (as largest metallic component) concealed anywhere on the body in any orientation at normal walk-through speeds (0.5 to 1.3 meters/sec), at all walking positions through the archway, and with any gait at a minimum detection rate of 95 % (at a 90% confidence level).

2. WTMDs and SSs must be capable of detecting the weapons in Appendix B (or similar) disassembled. WTMDs and SSs must be capable of detecting disassembled gun(s) (.22 cal. or .32 cal.) and knife with 2 ½ inch blade independent of its magnetic flux density state as purchased, used in testing, firing or intentionally degaussed.

3. WTMDs must be capable of preset detection levels; minimum of three (3). These levels must be coded and not configurable through the operator interface.

4. WTMDs must be able to provide a Random Alarm detector with the ability to set percentage from .05% to 30%. The Random Alarm shall be overridden by an actual detection of metal.

5. WTMDs must be capable of Radioactive Material Detection

6. WTMDs must be capable of Cellular Phone Ferromagnetic Detection, referred to as Mi2.

7. WTMS must be capable of Thermal Screening and detection of high body temperature to alarm on a selected temperature and above or below with an accuracy of plus or minus .1 degree or less with continuous calibration.

8. WTMDs must include optimized touch screen user interface which allows for monitoring and recording of all transits.

9. WTMDs must be capable of being enhanced to take advantage of available accessories and emerging technologies such as but not limited to Radiation Detection, Temperature Screening, Video Surveillance, etc.

10. WTMDs must conform to ASTM WK76321 – Standard

Performance Specifications and Test Methods for Walk Through Metal Detectors.

11. SSs must detect must discriminate between metals that are consistent with shoe components and those that are not.

12. SSs must have a fast analysis time for a rapid flow rate of less than 5 seconds.

B. Masking Metal

WTMD and SSs detection rates must not be degraded by the presence of typical, incidental metal such as clothing with metallic content, accessories, jewelry worn on the body, or intentional masking using common metals such as aluminum, brass, zinc, tin, or iron.

C. Nuisance Alarms

The nuisance alarm rate must not be greater than 30%.

IV - ENVIRONMENTAL CONDITIONS

WTMD and SS performance must not be degraded when operating at an ambient air temperature of 12ºC (53ºF) to 35ºC (95ºF) or ambient relative humidity of 10% to 80%, independent of weapon temperature.

V - LOCATION FUNCTION

WTMDs must display information that permits an operator to locate all concealed weapons with the prescribed accuracy minimums. WTMD should report the location to within 20 cm center-to-center (declared vs. actual) on the body.

VI - BAD-SCAN LIMIT / RESET

Corrupted or incomplete screening events must be limited to ≤ 1 per 200 Visitors. WTMD must be reset by the visitor passing back through the WTMD portal or by the operator using a manual reset button accessible only to the operator. WTMD must provide distinct visual and audible indicators to notify the operator if the visitor enters when the WTMD is not ready so that an operator can initiate a re-scan.

VII - OPERATIONAL AVAILABILITY

WTMD reliability (Mean-Time-Between-Failure), maintainability (Mean-Time-To-Repair), and maintenance concept as designed must yield at least a 99.86% operational availability rate (Ao), whereas the cumulative down-time per unit during inspection duty hours for all maintenance must not exceed 3 duty hours annually assuming a 12-hour duty day for 365 days each year. Ao is defined as:

Uptime Ao = --------------------------------- for any single WTMD on any duty day Uptime + Downtime

Downtime is the total amount of time the unit is not available for use during the duty day.

Downtime can be caused by three events:

A critical failure (Any failure where the WTMD cannot perform its mission for greater than 10 minutes and maintenance is contacted);

A non-critical failure (Problem occurs, and the fault condition is cleared within 10 minutes or is cleared without contacting maintenance); and Recalibration (Following either critical or non-critical failure, time spent restoring the WTMD to operational status, including running through calibration or checkout sequence/procedure.)

VIII - THROUGHPUT CAPACITY

WTMD must permit a continuous throughput rate of at least 250 visitors per hour through a unit-archway. WTMD detection process-time must be within 1 second. WTMD must not require the visitor to dwell in the portal to render an inspection.

IX - POWER LOSS RECOVERY

WTMD must possess a means of storing, retrieving and automatically re-calibrating to the properly calibrated WTMD configuration after disruption of power.

X - CONTROLS

A. OPERATOR CONTROLS

Access to operator controls must require a key or an electronically read card.

Operator controls must include a Power On/Off switch and a detector fault reset button. WTMD should offer a power switch option within 3 feet of the floor.

B. SECURITY CONTROLS

Because the units are used in areas accessible to the public, the WTMD and SS shall provide the means to:

• Physically protect its sensitive components and controls;

• Password protect access to operational configuration parameters and collected data in both operational and non-operational modes; and

• Possess lockable maintenance access doors and/or possess highly visible tamper-evident seals or alarms on assemblies that contain sensitive components/data.

C. SOFTWARE CONTROLS

1. The WTMD software must allow user access and capabilities. User accounts must be password protected and provide for authorized user access verification.

2. The WTMD software must permit access to the system by authorized users only.

3. The WTMD software must allow authorized users to access only those functions for which they are authorized. Null passwords must not be allowed.

4. The WTMD software must deny access to the WTMD after three failed log-on attempts for all user levels. The next higher user level must be permitted to reset the password.

5. The WTMD software must record/log unauthorized system access attempts

6. The WTMD software must deny access to unauthorized users to direct operating system (OS) functions/commands (see Appendix B).

7. The WTMD software must restrict access to system/OS files/data

8. The WTMD software must be able to capture the number of individuals that enter the portal and the ratio of the number of alarms per individual.

9. The WTMD software shall allow the operator the capability to retrieve and store the alarm event (discovery of the alarm) and location of the metallic object for evidentiary purposes.

XI - ALARM INDICATORS / DISPLAYS

A. DETECTION

The WTMD must provide a positive alarm indication immediately upon threat detection.

This alarm must include both an audible alarm indicator and a visual alarm indicator.

Indicators must be uniquely different from other audible and visual indicator functions for the metal, thermal, random, radioactive, and ferromagnetic. The audible alarm must be able to exceed the prevailing ambient noise by at least 10 decibels in the frequency range of 500-3000 Hz. The visual alarm must be a flashing light visible on the sterile side of the WTMD at a distance of 30 feet.

The SS must provide a positive alarm indication immediately upon threat detection. This alarm must include both an audible alarm indicator and a visual alarm indicator.

Indicators must be uniquely different from other audible and visual indicator functions for the metal, thermal, random, radioactive, and ferromagnetic.

B. NATIONAL INSTITUTE OF JUSTICE STANDARD 0601.02

The National Institute of Justice (NIJ) program supports law enforcement and criminal justice entities throughout the United States. National Institute of Justice Standard

0601.02 was developed with technical support from the Office of Law Enforcement Standards (OLES) of the National Institute of Standards and Technology (NIST) to help strengthen law enforcement and criminal justice in the United States by conducting extensive research to aid those agencies in selecting and procuring quality equipment in accordance with the individual agency requirements.

The standard is intended to be a formal document detailing the performance that the equipment is required to give and to describe the test methods and thresholds by which the actual equipment performance can be measured. The standard serves as a credible reference for procurement documents to specify equipment of a standard quality and to objectively identify equipment of acceptable performance.

C. POWER / DEVICE STATUS

WTMD must clearly and continuously display power status (on and ready or on and low power or out of specification) to the operator. Entry display must reveal inoperative or non-ready status to operator and visitor. WTMD must possess display(s) to control visitor entry using standard access control symbols or indicators. WTMD must indicate to the operator when it is running its start-up built-in test. WTMD must possess a means to report or log the last calibration date. WTMD must provide displays to support supervisor/maintenance functions.

XII - TEST FUNCTIONS

A. MANUAL CALIBRATION TEST KIT

WTMD must include a Calibration Test Kit and a calibration mode to perform a manual calibration. This kit must consist of test objects and procedures requiring less than 2 minutes to complete. WTMD must not require a manual calibration as a result of a power failure.

B. FIELD DATA LOGGER/ WTMD-NETWORK

WTMD must possess a secured means to record and report system data per standard format and medium. WTMD must possess a means to network all WTMD units at a single checkpoint and/or within a single facility to a centralized multi-channel data logger on a local area network to remotely collect operational and performance data.

C. The WTMD should provide:

1. User Access and data view in conformance with the access levels.

2. Software and connectivity to download reports to a local PC connection via a

Universal Serial Bus (USB) Port or Ethernet Port after password authentication of the transfer request.

D. The WTMD shall:

1. Make all computer(s) operating system log files available for downloading.

2. Ensure that no feature of the data management, collection, or reporting capabilities will cause the WTMD to either malfunction or cease operating or will disable the WTMD in any other way.

3. Provide all required data/information with appropriate headers in comma-delimited format in accordance with Appendix D of this specification.

XIII - SAFETY

A. GENERAL SAFETY

WTMDs must comply with the following documents:

1. ACGIH-0302 (1996), American Conference of Governmental Industrial Hygienists, “Documentation of the Threshold Limit Values, Sub-Radio Frequency (30 kHz and below) Magnetic Fields”

2. ASTM F1468-04a, “Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening”

3. ASTM C1309-97, “Standard Practice for Performance Evaluation of In-Plant Walk- Through Metal Detectors”

4. ASTM F3356-19a, “Standard Specification for Conformity Assessment of Metal Detectors Used in Safety and Security”

5. EN 50081-1 (1992), European Standard, “Electromagnetic Compatibility – Generic Emission Standard, Part 1: Residential, Commercial and Light Industry”

6. EN 60950 (Electrical Safety)

7. FCC 47 CFR Part 15 (1996), Federal Communications Commission, “Code of Federal

Regulations; Title 47 – Telecommunications; Part 15, Radio Frequency Devices.”

8. IEC 60068-2-64, “Environmental Test – Part 2: Test Methods – Test FH: Vibration

Broadband Random (Digital Control) and Guidance

9. IEC 61000-6-1 (amended EN 50082-1), European Standard, “Electromagnetic

Compatibility – Generic Immunity Standard, Part 1: Residential, Commercial and Light Industry”

10. IEC 68-2-27 (1987), International Electrotechnical Commission, “Basic Environmental Testing Procedures, Part 2: Tests – Test Ea and Guidance: Shock”

11. IEC 68-2-29 (1987), International Electrotechnical Commission, “Basic Environmental Testing Procedures, Part 2: Tests- Test Eb and Guidance: Bump”

12. Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999, “IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.”

13. International Commission on Non-Ionizing Radiation (ICNIRP) Guidelines, “Guidelines for Limiting Exposure to Time-Varying Electric, Magnetic, and Electromagnetic Field (Up to 300 GHz) found at: http://www.icnirp.de/ and http://www.icnirp.de/Documents/Emfgdl.PDF

14. MIL-STD-461D Method RS101, Military Standard, “Requirements for the Control of Electromagnetic Interference, Emissions, and Susceptibility, Method RS101, Radiated Susceptibility, Magnetic Field, 30 Hz to 100 kHz.”

15. MIL-STD-462D Method RS101, Military Standard, “Test Method Standard for Measurement of Electromagnetic Interference Characteristics, Method RS101, Radiated http://www.icnirp.de/ http://www.icnirp.de/Documents/Emfgdl.PDF

16. Susceptibility, Magnetic Field, 30 Hz to 100 kHz”

17. National Institute of Justice (NIJ) Standard 0601.02, “Walk-Through Metal Detectors for

Use in Concealed Weapon and Contraband Detection”

18. OSHA Regulation 1910.147 De-energizing Equipment

19. OSHA Regulation 1910.97 (a)(2)(i) Non-Ionizing Radiation

20. UL 1950, Second Edition, Underwriters Laboratories, “Standard for Information

Technology Equipment, Including Electrical Business Equipment”

21. DHS S&T Laboratory and/or third-party verification.

B. ELECTRICAL SAFETY

WTMD must comply with UL 1950, Second Edition (Underwriters Laboratories Standard for Information Technology Equipment) / CSA C22.2 950, EN 60950, or internationally recognized equivalence.

C. ERGONOMIC SAFETY

WTMD and SS must not possess (1) sharp corners or edges that can puncture, cut, or tear the skin or clothing or otherwise cause bodily injury, (2) external wires, connectors, or cables except the power cable and data cable, or (3) loose covers and cowlings.

D. MAGNETIC FIELD SAFETY

WTMD must comply with:

The exposure limits specified in ACGIH-0302 (1996), Sub-Radio Frequency (30 kHz and below) Magnetic Fields, and “Guidelines For Limiting Exposure To Time-Varying Electric, Magnetic, And Electromagnetic Fields (Up To 300 GHz)", International Commission on Non-Ionizing Radiation Protection, Health Phys. 1998 April, Vol.74, No.4, 494-522.

E. ELECTROMAGNETIC INTERFERENCE with PERSONAL MEDICAL

ELECTRONIC DEVICES

WTMD and SS must not adversely impact individuals with personal medical electronic devices. Candidate WTMD manufacturers must provide descriptive data as defined in Appendix D to permit an assessment by the Food & Drug Administration’s Center for Devices and Radiological Health (CDRH).

XIV - PRIVACY

WTMD and SS displays must not produce an image of reproductive organs, folds of fat, body form, prosthetics, deformities, birthmarks or medical implants/devices. The information gathered by the WTMD and SS must be limited to only that of detecting potential weapons.

XV - POWER

WTMD must permit operation using 115 VAC power line with up to ± 15% voltage tolerance and up to ± 5% in frequency tolerance. See Para XI for power/device status reporting. WTMD must possess a means to secure the power cord at both ends when in use to prevent inadvertent physical disconnection. WTMD must plug into a standard NEMA L5-15R (locking receptacle).

A secondary power cable must be provided to plug into a NEMA 5-15R (non-locking receptacle). WTMD must route the power and data cables (if applicable) to ground level and provide sockets on both sides of the portal to prevent cord- tripping hazards.

XVI - PHYSICAL REQUIREMENTS

A. DETECTION SPACE MINIMUMS

The WTMD must conform to the following dimensions:

Minimum Height 196 centimeters Minimum Width 70 centimeters for the entire height

B. MAXIMUM EXTERNAL HEIGHT

The external height of the WTMD must not exceed 244 centimeters.

C. MAXIMUM WEIGHT

The maximum weight of the WTMD must not exceed 100 kilograms

XVII - IMPACT RESISTANCE

A. SHOCK

WTMD must survive a shock event defined by IEC 68-2-27 (1987) using one half-sine pulse with a nominal peak acceleration of 5 g (50m/s2) and nominal pulse duration of 30 ms with no observable change in detection performance. Equivalent commercial practice or analysis may be substituted.

B. BUMP

WTMD must survive 100 bumps defined by IEC 68-2-29 (1987) each with a nominal peak accelerating of 10 g (100 m/s2) and nominal pulse duration of 16 ms with no observable change in detection performance. Equivalent commercial practice or analysis may be substituted.

C. SLIDE

WTMD and SS must resist sliding when a 200N (46 lb.) force is applied to the middle of the archway to simulate an errant visitor or bag bump on a flat tiled floor. This requirement must be satisfied using an anchoring method that does not permanently alter the floor.

D. TIP-OVER

WTMD and SS must not tip-over when a 600N (135 lb.) force is applied at 1.3 meters above the ground surface in accordance with Section 5.4 of American Society for Testing and Materials (ASTM) Designation F 1468-95. This requirement must be satisfied using an anchoring method that does not permanently alter the floor.

XVIII - ELECTROMAGNETIC / VIBRATION COMPATIBILITY

A. EMISSIONS

WTMD must comply with 47 CFR Telecommunications Part 15, Radio Frequency Devices. WTMD must comply with EN 50081-1 (1992).

B. ELECTROMAGNETIC IMMUNITY

WTMD detection function (Para III including detection and nuisance alarm rates) must not be degraded by the following sources of radiated and conducted noise present at the screening location:

• X-ray equipment and feed belts as currently positioned at checkpoints,

• Reinforcing steel in concrete flooring,

• Low-level conducted noise,

• Transient hum,

• Noise spike,

• TV noise,

• Audio frequency noise,

• Switching power noise,

• Fluorescent light noise,

• Cell phone transmission, and

• RF transmission

When defined and tested in accordance with IEC 61000-6-1 or MIL-STD- 462D, Method RS101 per limits specified in MIL-STD-461D. Equivalent commercial practice or analysis may be substituted.

C. VIBRATION IMMUNITY

WTMD and SS detection function (Para III, including detection and nuisance alarm rates) must not be degraded by low frequency vibration stemming from sources such as subway/train traffic, heavy foot traffic, large HVAC systems, outdoor truck traffic, or aircraft traffic.

XIX – Relocation of Walk-Through Metal Detector and Shoe Scanner

A. The Detection equipment is to be portable and deployable to locations as necessary; therefore, the WTMD and SS must be able to be broken-down and setup by a non-technician with a couple of hand tools in less than 10 steps that can be accomplished in less than 15 minutes.

B. All necessary portable cases and or transportation bags must be provided.

C. Within 24-hours of the Delivery of the WTMD and SS the Contractor must demonstrate the break-down, setup, and configuration processes to include the use of any portable cases or transport bags.

XX – Method of Shipment

The Contractor must use industry best commercial practices for shipping and must remain in compliance with all local, state, and Federal regulations.

A. Delivery and Installation of New Equipment

1. The Contractor must provide for the necessary shipment and delivery of the WTMD and

SS.

2. Delivery must be Free On Board (F.O.B.) Destination to the delivery location of 6315 Brenmar Drive, Alexandria, Virginia

B. The Contractor must deliver and install WTMDs between the business hours of 8:00 a.m. and 4:30 p.m. (local time), Monday through Friday, Federal holidays excluded.

C. Upon completion of installation, the Contractor must demonstrate that the

WTMD and SS is properly functioning, pursuant to the operating instructions furnished with each WTMD and SS in the presence of a DHS designated Technical Representative.

XXI - Warranty Coverage

A. The Contractor must warranty each WTMD for a period of five years and perform annual maintenance for a period of five years after installation/set up.

B. The Contractor must provide a five-year preventive maintenance plan and an extended optional maintenance plan for each unit provided under this procurement.

C. Maintenance and repairs must be performed during the hours of 8:00 a.m.

to 4:30 p.m. (local time), Monday through Friday (excluding Federal holidays).

D. The Contractor must respond to verbal or written service requests from the authorized ordering official at the Megacenter responsible for the region where the WTMD is located.

E. “Response” to a service call is considered to be verbal instructions provided over the telephone by a qualified technician to the machine operator which details the procedure for restoring full operational status of the WTMD, or the arrival of a qualified technician at the site where service is being requested, to evaluate and affect the repair. Any actions taken by the machine operator at the request of the Contractor must be at the Contractor’s risk.

F. The Contractor must maintain a maintenance log to catalog all service requests, the action taken, time expended, date completed and the name of the technician who completed the service call. The maintenance log must be made available to the CO or COR, on request.

G. The Contractor must provide a toll-free customer support telephone services to receive routine and emergency service requests, and coordinate service technician response. The Customer Service representatives must be available during the hours of 8:00am to 4:30pm locally, and fluent in English as spoken in the United States, including common terms and idioms used in the screening of visitors and operation of WTMDs.

H. The Contractor’s preventive maintenance plan must incorporate examining, calibrating, cleaning, lubricating, testing, and adjusting the equipment, and as conditions warrant, repairing or replacing equipment included under the contract in accordance with Original Equipment Manufacturer standards.

XXII - WTMD Replacement:

A. During the warranty period, the failure of an WTMD to maintain the operational availability as outlined in the Operational Availability section will result in a determination by the CO and the COR to replace the WTMD with new equipment.

B. The Contractor must deliver and install a replacement WTMD within 3 business days after the replacement determination and written request provided by the Contracting Officer to the contractor’s customer service representative.

C. The replacement WTMD must have capabilities and functions equal to or greater than the unit being replaced.

D. The Contractor may provide a temporary WTMD, new or used, of equal or greater capabilities and functions within the 3-business day response time while a permanent unit is ordered and delivered. However, the permanent unit must be delivered within 30 days of the written request for replacement.

E. The replacement of a WTMD must result in no additional equipment, shipping, labor, or other costs to the Government.

XXIII - Training

A. No later than 24 hours after installation of a WTMD, the Contractor must provide on- site user training to WTMD operators, supervisors, and other personnel as determined by the COR.

B. Training must include instructions on how to operate the unit’s basic function keys and special features, including all program applications and diagnostic tools.

C. Training must include instructions on how to break-down transport and setup the units and special features, including all program applications and diagnostic tools.

D. All training and instruction must be written and communicated in English.

CLAUSES

FAR 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders – Commercial Products and Commercial Services (Jan 2022)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or

Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services

Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

https://www.acquisition.gov/far/52.203-19#FAR_52_203_19 https://www.acquisition.gov/far/52.204-23#FAR_52_204_23

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video

Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.233-3, Protest After Award (AUG 1996) ( 31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

(1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 2402).

(2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) ( 41 U.S.C. 3509)).

(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

(4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

(5) [Reserved].

(6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L.

111-117, section 743 of Div. C).

(7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

(8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) ( 31 U.S.C. 6101 note).

(9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) ( 41 U.S.C. 2313).

(10) [Reserved].

(11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (SEP https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.233-3#FAR_52_233_3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.233-4#FAR_52_233_4 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14 https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.209-9#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3

2021) ( 15 U.S.C. 657a).

(12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (SEP 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a).

(13) [Reserved]

(14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) ( 15 U.S.C.

644).

(ii) Alternate I (MAR 2020) of 52.219-6.

(15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) ( 15 U.S.C. 644).

(ii) Alternate I (MAR 2020) of 52.219-7.

(16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) ( 15 U.S.C. 637(d)(2) and (3)).

(17) (i) 52.219-9, Small Business Subcontracting Plan (NOV 2021) ( 15 U.S.C.

637(d)(4)).

(ii) Alternate I (NOV 2016) of 52.219-9.

(iii) Alternate II (NOV 2016) of 52.219-9.

(iv) Alternate III (JUN 2020) of 52.219-9.

(v) Alternate IV (SEP 2021) of 52.219-9.

(18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) ( 15 U.S.C. 644(r)).

(ii) Alternate I (MAR 2020) of 52.219-13.

(19) 52.219-14, Limitations on Subcontracting (SEP 2021) ( 15 U.S.C. 637s).

(20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) ( 15 U.S.C. 637(d)(4)(F)(i)).

(21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set- Aside (SEP 2021) ( 15 U.S.C. 657f).

(22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (SEP 2021) ( 15 U.S.C. 632(a)(2)).

(ii) Alternate I (MAR 2020) of 52.219-28.

http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-16#FAR_52_219_16 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-27#FAR_52_219_27 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28

(23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (SEP 2021) ( 15 U.S.C. 637(m)).

(24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women- Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (SEP 2021) ( 15 U.S.C. 637(m)).

(25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) ( 15 U.S.C. 644(r)).

(26) 52.219-33, Nonmanufacturer Rule (SEP 2021) ( 15U.S.C. 637(a)(17)).

X_ (27) 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

(28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN 2022) (E.O.13126).

X_ (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

X_ (30) (i) 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

(ii) Alternate I (FEB 1999) of 52.222-26.

(31) (i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) ( 38 U.S.C. 4212).

(ii) Alternate I (JUL 2014) of 52.222-35.

X_ (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) ( 29 U.S.C. 793).

(ii) Alternate I (JUL 2014) of 52.222-36.

(33) 52.222-37, Employment Reports on Veterans (JUN 2020) ( 38 U.S.C. 4212).

(34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

X_ (35) (i) 52.222-50, Combating Trafficking in Persons (NOV 2021) ( 22 U.S.C.

chapter 78 and E.O. 13627).

(ii) Alternate I (MAR 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O.

13627).

(36) 52.222-54, Employment Eligibility Verification (NOV 2021) . (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in

FAR 22.1803.)

(37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA– Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the https://www.acquisition.gov/far/52.219-29#FAR_52_219_29 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-30#FAR_52_219_30 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-32#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/52.219-33#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/52.222-3#FAR_52_222_3 https://www.acquisition.gov/far/52.222-19#FAR_52_222_19 https://www.acquisition.gov/far/52.222-21#FAR_52_222_21 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title29-section793&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 https://www.acquisition.gov/far/52.222-37#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-40#FAR_52_222_40 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-54#FAR_52_222_54 https://www.acquisition.gov/far/22.1803#FAR_22_1803 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 acquisition of commercially available off-the-shelf items.)

(ii) Alternate I (MAY 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

(39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

(40) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (OCT 2015) of 52.223-13.

(41) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (Jun2014) of 52.223-14.

(42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) ( 42 U.S.C. 8259b).

(43) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

(ii) Alternate I (JUN 2014) of 52.223-16.

https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-11#FAR_52_223_11 https://www.acquisition.gov/far/52.223-12#FAR_52_223_12 https://www.acquisition.gov/far/52.223-13#FAR_52_223_13 https://www.acquisition.gov/far/52.223-13#FAR_52_223_13 https://www.acquisition.gov/far/52.223-14#FAR_52_223_14 https://www.acquisition.gov/far/52.223-14#FAR_52_223_14 https://www.acquisition.gov/far/52.223-15#FAR_52_223_15 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-16#FAR_52_223_16 https://www.acquisition.gov/far/52.223-16#FAR_52_223_16

X_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513).

(45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

(46) 52.223-21, Foams (Jun2016) (E.O. 13693).

(47) (i) 52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552 a).

(ii) Alternate I (JAN 2017) of 52.224-3.

(48) 52.225-1, Buy American-Supplies (NOV 2021) ( 41 U.S.C. chapter 83).

(49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2021) ( 41 U.S.C.chapter83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109- 283, 110-138, 112-41, 112-42, and 112-43.

(ii) Alternate I (JAN 2021) of 52.225-3.

(iii) Alternate II (JAN 2021) of 52.225-3.

(iv) Alternate III (JAN 2021) of 52.225-3.

(50) 52.225-5, Trade Agreements (OCT 2019) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X_ (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302Note).

(53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) ( 42 U.S.C. 5150).

(54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) ( 42 U.S.C. 5150).

(55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

https://www.acquisition.gov/far/52.223-18#FAR_52_223_18 https://www.acquisition.gov/far/52.223-20#FAR_52_223_20 https://www.acquisition.gov/far/52.223-21#FAR_52_223_21 https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-5#FAR_52_225_5 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title19-section2501&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title19-section3301&num=0&edition=prelim https://www.acquisition.gov/far/52.225-13#FAR_52_225_13 https://www.acquisition.gov/far/52.225-26#FAR_52_225_26 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.226-4#FAR_52_226_4 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.226-5#FAR_52_226_5 https://www.acquisition.gov/far/52.229-12#FAR_52_229_12

(56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) ( 41 U.S.C. 4505, 10 U.S.C. 2307(f)).

(57) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV 2021) ( 41 U.S.C. 4505, 10 U.S.C. 2307(f)).

X_ (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (OCT2018) ( 31 U.S.C. 3332).

(59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) ( 31 U.S.C. 3332).

(60) 52.232-36, Payment by Third Party (MAY 2014) ( 31 U.S.C. 3332).

(61) 52.239-1, Privacy or Security Safeguards (AUG 1996) ( 5 U.S.C. 552a).

(62) 52.242-5, Payments to Small Business Subcontractors (JAN 2017) ( 15 U.S.C. 637(d)(13)).

(63) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631).

(ii) Alternate I (APR 2003) of 52.247-64.

(iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

(1) 52.222-41, Service Contract Labor Standards (AUG 2018) ( 41 U.S.C. chapter67).

(2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) ( 29 U.S.C. 206 and 41 U.S.C. chapter 67).

(3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards- Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) ( 29 U.S.C. 206 and 41 U.S.C. chapter 67).

https://www.acquisition.gov/far/52.232-29#FAR_52_232_29 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.232-30#FAR_52_232_30 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.232-33#FAR_52_232_33 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title31-section3332&num=0&edition=prelim https://www.acquisition.gov/far/52.232-34#FAR_52_232_34 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.232-36#FAR_52_232_36 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.239-1#FAR_52_239_1 http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title5-section552a&num=0&edition=prelim https://www.acquisition.gov/far/52.242-5#FAR_52_242_5 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.247-64#FAR_52_247_64 https://www.govinfo.gov/content/pkg/USCODE-2019-title46/html/USCODE-2019-title46-subtitleV-partD-chap553-subchapI-sec55305.htm https://www.govinfo.gov/content/pkg/USCODE-2019-title46/html/USCODE-2019-title46-subtitleV-partD-chap553-subchapI-sec55305.htm http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.247-64#FAR_52_247_64 https://www.acquisition.gov/far/52.247-64#FAR_52_247_64 https://www.acquisition.gov/far/52.222-41#FAR_52_222_41 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-42#FAR_52_222_42 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml%3Bjsessionid%3D114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-43#FAR_52_222_43

(4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards- Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

(5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment- Requirements (May 2014) ( 41 U.S.C. chapter 67).

(6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014) ( 41 U.S.C. chapter 67).

(7) 52.222-55, Minimum Wages for…