Colfax_Curved_Rail_Replacement_and_Spare,_Materials_only.pdf

Regional Transportation District

Contracting and Procurement

1660 Blake St.

Denver, CO 80202

Invitation for Bid

IFB 226DR014

COLFAX CURVED RAIL REPLACEMENT AND SPARE, MATERIALS ONLY

September 17, 2026

RESPONSES MUST BE SUBMITTED ELECTRONICALLY TO:

https://procurement.opengov.com/portal/rtd-denver https://procurement.opengov.com/portal/rtd-denver

Regional Transportation District

INVITATION FOR BID

Colfax Curved Rail Replacement and Spare, Materials only

Sections

1. INTRODUCTION

2. INSTRUCTIONS TO BIDDERS

3. GENERAL INSTRUCTIONS

4. BIDS

5. AWARD PROCESS

6. LEGAL NOTICE TO BIDDERS

7. BID CONTENTS CHECKLIST (FORMS TO BE SUBMITTED)

8. PRICING FORM

9. SCOPE OF WORK SERVICES/TECHNICAL SPECIFICATIONS

Attachments:

A - 01-_Colfax_Rail_SOW rev

B - 03- Colfax Rail Drawings

IFB 226DR014 - Colfax Curved Rail Replacement and Spare, Materials only

1. INTRODUCTION

RTD is seeking responses from qualified respondents to provide: Colfax Curved Rail

Replacement and Spare, Materials only

1.1. Summary

In connection with an RTD project to replace a curved section of the existing light rail track under the Colfax bridge near the Auraria West Station in downtown Denver, this is solicitation is for the procurement of materials for all pre-curved running rail and restraining rail required for the project.

1.2. Contact Information

Marla Bainbridge

Procurement Specialist

Email: marla.bainbridge@rtd-denver.com

Phone: (303) 299-2411

Department:

Rail Operations

1.3. Timeline

IFB advertised and made available to prospective bidders.

September 17, 2026

Inquiry Period: Written questions from prospective bidders are to be received in the online procurement portal.

September 24, 2026, 2:00pm

RTD sends responses to written questions, if any, to all prospective bidders through

RTD’s online procurement portal.

September 28, 2026, 12:00am mailto:marla.bainbridge@rtd-denver.com tel:(303)299-2411

Bids due: Bids must be received through RTD’s online procurement portal.

October 6, 2026, 2:00pm

Microsoft Teams meeting

Join:

https://teams.microsoft.com/meet/250428

443879673?p=KQ6a6NJzf7oAiz1xzv

Meeting ID: 250 428 443 879 673

Passcode: RW6Vo77N

RTD anticipates making final selection.

October 12, 2026 https://teams.microsoft.com/meet/250428443879673?p=KQ6a6NJzf7oAiz1xzv https://teams.microsoft.com/meet/250428443879673?p=KQ6a6NJzf7oAiz1xzv

2. INSTRUCTIONS TO BIDDERS

2.1. Work

RTD will accept bids from qualified companies until 2:00 pm on Tuesday, October 6, 2026 via RTD's online procurement portal, OpenGov. This Invitation for Bid (“IFB”) is for Colfax Curved Rail Replacement and Spare, Materials only, per the enclosed specifications and requirements.

2.2. Cost Type

Payments are anticipated to be made on a Fixed Price basis.

2.3. Award of Contract

Award of a Contract from this IFB will be based upon competitive bid (responsive, responsible low bidder).

2.4. Period of Performance

Subject to the Termination provision of the Contract, performance shall commence as of the Effective Date (or in the event that RTD provides a Notice to Proceed to the

Contractor, the Period of Performance shall commence on the date of the Notice to

Proceed) and shall continue for three months (subject to the exercise of any option periods).

2.5. Small Business Requirement for Contracts with No SBE Goal

RTD has not specified an SBE participation goal for the Work to be performed under the

Contract. However, RTD encourages and expects bidders to pursue subcontracting, mentoring, joint venturing, teaming and partnering opportunities with SBE firms in the ordinary course of its business/teaming strategies. Bidders are encouraged and expected to create a level playing field to the maximum practicable extent consistent with the objectives and requirements of the RTD SBE program based on federal regulations codified at 49 CFR Part 26 and RTD’s SBE Program Policy. Therefore, bidders are requested to document their efforts to include SBEs in this contracting opportunity, if any. Bidders are also requested to explain in their executive summary how they intend to utilize and/or will encourage subcontracting, mentoring, joint venturing and/or partnering opportunities with SBEs for this project. Furthermore, bidders are to submit a general workforce breakdown for their company (including affiliates) and the project. RTD is interested in your strategies and approach to seeking diversity in the bidder team to include SBEs in all phases of subcontracting, supplier and workforce opportunities associated with the Contract. RTD is an equal opportunity employer and also operates a successful Small Business Opportunity Office. Therefore, RTD expects bidders to demonstrate the same meaningful level of commitment to diversity from businesses that participate in RTD’s procurement process.

2.6. Bid Validity Period

Bids shall be valid for a duration of no less than ninety (90) days from bid due date.

Bids that are late will not be accepted!

3. GENERAL INSTRUCTIONS

3.1. General

Each Bidder is solely responsible for submitting any necessary forms and certifications that may be required by the IFB. Enclosed is a copy of the Contract contemplated for award substantially in the form to be executed.

A list of all holders (“followers”) of the IFB is available for view and/or print on the online procurement portal. The list is obtainable from the IFB advertisement date through the IFB close date.

3.2. Option(s)

If RTD has included the potential for options on this Contract, bids should be adjusted to cover such option(s). The option quantities or periods contained in the bid shall be evaluated in order to determine Contract award. When options have not been evaluated as part of the award, the exercise of such options will be considered “sole source” procurements. RTD will evaluate bids for award purposes by adding the total bid price for all options to the total bid price for the initial term of the Contract. Award of a

Contract containing options shall not obligate RTD to exercise such option(s).

3.3. Brand Name or Approved Equal

For approval of alternatives after Contract award, Bidders should refer to the Contract

Terms and Conditions.

Wherever brand, manufacturer, model, or product names are indicated in the Scope of

Work, they are included for the purpose of establishing identification and a general description of the item. Whenever a process is designated or a manufacturer’s name, brand, model, or item designation is given, or whenever a process or material covered by patent is designated or described, it will be understood that the words “or approved equal” follow such name, designation, or description, whether or not, in fact, they do so follow.

Specifications are provided to identify the product/service required and to establish an acceptable quality level. Bids on products of equal quality and usability will normally be considered unless otherwise stated. RTD will be the sole judge in determining “equals” in regard to quality and performance. Any Bidder that wants to bid or respond with the intent of using an approved equal must obtain approval before the bid opening. It should be assumed that submittals of supposed approved equals after award of the

Contract will be denied.

Notwithstanding the foregoing, RTD may designate a process or a manufacturer's name, brand, model, or item, or designate or describe a process or material covered by patent without accepting requests for approved equals if RTD provides justification for such designation or description in the solicitation.

A brand name or approved equal specification means that the brand name is for the purpose of describing the standard of quality, performance, and characteristics desired.

Unless otherwise specified, information to address equivalent substitutes in brand name or approved equal descriptions must include published information -- such as brochures, descriptions, or other information made available in the general course of the vendor's business -- that demonstrates: equivalent functionality in terms of significant (or other specified, e.g. form, fit, or function) performance characteristics; similar duration and scope of warranty protections; comparable experience with the same, similar, or predecessor product line; and an adequate period (or minimum period specified in the solicitation) of customer support experience to demonstrate a comparable acceptable level and availability of customer support. The determination of whether a proposed substitute is acceptable is totally within the discretion of RTD.

Requests for approved equals must be received by the Procurement Specialist in writing prior to the end of the Inquiry Period. Any request for an approved equal must be fully supported with technical data, test results, or other pertinent information as evidence that the substitute offered is equal to or better than the Scope of Work requires. In addition, any test requirements in the Scope of Work that pertain to an item under consideration for approved equal must be submitted with the request for approved equal. Decisions of RTD shall be reduced to writing by the Procurement Specialist. Each

Bidder requesting approved equals shall be notified in writing of RTD’s decision not less than five days before the date of bid opening.

Failure to furnish brochures, specifications, and/or samples as requested may be sufficient cause to consider a quote unacceptable or a bid non-responsive.

Samples of product(s), when required, must be furnished free of expense to RTD, and if not destroyed by tests may, upon request made at the time the sample is furnished, be returned at the Bidder's expense.

It should be understood that using a specified brand name component and/or equipment in the Scope of Work shall not relieve the Contractor from its responsibility to accomplish the Work or provide the Service, as applicable, in accordance with applicable warranties and other contractual requirements. The Contractor is responsible for notifying RTD of any inappropriate brand name component and/or equipment that may be called for in the Scope of Work and for proposing a suitable substitute for consideration.

3.4. Addenda to IFB

In the event that it becomes necessary to revise any part of this IFB, or if additional information is necessary to enable potential Bidders to make an adequate interpretation of the provisions of this IFB, an addendum to the IFB will be provided to each recipient of this IFB through RTD's online procurement portal.

3.5. Inquiries

Questions about RTD and this IFB, including requests for approved equals, shall be directed to Marla Bainbridge, Procurement Specialist, through RTD’s online procurement portal.

From the issuance date of this IFB until RTD selects a bid for award, Marla Bainbridge, Procurement Specialist, is the sole point of contact for RTD and RTD’s project team members concerning this IFB. (In this IFB and the Contract Documents, this point of contact may be referred to as the Contract Administrator, Contracting Officer, Purchasing Agent, Buyer, or the like.) Any violation of this condition may be cause for

RTD to reject the offending Bidder’s bid. If RTD later discovers that the Bidder has engaged in any violations of this condition, RTD may reject the offending Bidder’s bid or rescind its Contract award. Bidders must agree not to distribute any part of their bid beyond RTD. A Bidder who shares information contained in its bid with other RTD personnel, RTD project team members, RTD board members, and/or competing

Bidders’ personnel may be disqualified.

Bidders’ questions must be submitted through RTD’s online procurement portal. All questions or requests for clarifications regarding this solicitation, including the form of the Contract, must be made during the Inquiry Period. RTD has no obligation to respond to questions or requests for clarifications that are not submitted through RTD’s online procurement portal, nor to those submitted outside of the Inquiry Period. Except as provided below, RTD’s responses to all inquiries properly submitted will be answered in the form of an addendum that will be provided to all recipients of this IFB through

RTD’s online procurement portal. See “Legal Notice to Bidders - Rights Reserved to

RTD.”

If the IFB Schedule provides for a pre-bid briefing (“Briefing”), RTD will not respond to any questions regarding the IFB until the Briefing is complete and the Inquiry Period if closed. Firms that have received this IFB, whether present for the Briefing or not, will receive: (1) a copy of the minutes; (2) answers to all questions presented; (3) a listing of all recipients of the IFB (current to date of Briefing); and (4) a copy of the sign-in sheet from the Briefing.

If a Respondent needs assistance using the online procurement portal, Respondents may access the Help Center for vendor training guides provided by OpenGov ("Software

Administrator"). Respondents may also contact the Software Administrator using the real-time chat function on the online procurement portal (located in lower right-hand corner of the screen), or via email at procurement-support@opengov.com for support.

3.6. Submission & Withdrawal

Respondents shall register on RTD’s online procurement portal. Once registered, Respondents may view and click "Follow" to be a Prospective Respondent for this IFB and will appear on the Follower’s list. Respondents that fail to Follow this project will not receive automated Addenda notifications, nor will they be able to submit a

Response in the online procurement portal, and therefore will be unable to participate, nor be considered for this IFB. Respondents must click “Draft Response” to properly begin and submit a Response via the online procurement portal.

RTD will accept responses to this IFB electronically via the online procurement portal until 2:00 pm on Tuesday, October 6, 2026. Responses received after the scheduled due date and time for submission will not be accepted. Responses submitted in any other format other than via the online procurement portal, including but not limited to, hard copy (mailed or hand delivered), facsimile, or emailed submittals, will not be accepted.

RTD and the Software Administrator are not responsible for untimely submissions due to personal or company internet or hardware limitations, settings or restrictions, internet speed, power outage, network connection, or use of a malfunctioning electronic device, or the like. Respondents are solely responsible for the capability of their computer system while responding to this IFB and for the stability of their internet service. Failure of the Respondent to successfully submit an electronic Response before the deadline indicated herein shall be at the Respondent’s sole risk, and RTD will not accept late and/or improperly submitted Responses. Once file(s) have been uploaded and the Submission Status shows as “Submitted,” a submission is complete. At that point, the Respondent will also receive an email confirmation from the online procurement portal. Respondents may withdraw their submittal electronically via the online procurement portal at any time prior to the scheduled due date and time for submission.

Bids that are late will not be accepted.

https://help.procurement.opengov.com/en/articles/5815468-video-guides-opengov-procurement-vendor-training mailto:procurement-support@opengov.com

4. BIDS

4.1. Submission Requirements

Any alteration, insertion, or erasure by the Bidder in the form of the IFB documents as originally prepared by RTD shall render the Bidder non-responsive and may constitute cause for rejection. Conditional bids or those that take exception to the IFB documents or Scope of Work may be treated as non-responsive.

4.2. Bid Submission

RTD’s Procurement Specialist must receive one copy of your bid through RTD’s online procurement portal in a format that complies with Level AA of the Web Content

Accessibility Guidelines 2.1 of the World Wide Web Consortium (W3C) Web Accessibility

Initiative, and one “Open Records” copy of your bid per the Colorado Open Records Act, C.R.S. § 24-72-200.1 et seq. (as amended), including the redaction of any confidential or proprietary information. To do this you will have to export the Pricing Form or Cost

Submittal Form, redact sensitive data, and then submit it as the Open Records Copy of

Bid in the Bid Contents Checklist (FORMS TO BE SUBMITTED).

Your bid must be received no later than the time and date set forth in the IFB Schedule.

4.3. Signatures

Bids must be electronically submitted by a duly authorized official of the firm. Bids submitted by consortiums, joint ventures, or teams, although permitted and encouraged, will not be considered responsive unless it is established that all contractual responsibility rests solely with one contractor or one legal entity which shall not be a subsidiary or affiliate with limited resources. Each submittal should indicate the entity responsible for execution on behalf of the consortium, joint venture, or team.

4.4. Bid Format

Bids MUST be completed using the enclosed bid form submitted through RTD’s online procurement portal.

4.5. Omissions from IFB

Should RTD omit any item from this IFB which is necessary to a clear understanding of the Work, or should it appear that various provisions are inconsistent or in conflict, then the Bidder shall request written instructions from RTD prior to the end of the Inquiry

Period.

4.6. Unbalanced Bids

Bids which, in the opinion of the Contracting Officer, are unbalanced so that each item does not reasonably carry its own proportion of cost, or which contain inadequate or unreasonable prices for any item, may be rejected.

4.7. Withdrawal of Bids

A Bidder may withdraw its bid at any time prior to the bid opening through RTD’s online supplier Portal not later than the exact time set for opening of bids.

4.8. Only One Bid Accepted

RTD will accept only one bid for the Work from any one Bidder. This includes bids that may be submitted under different names by one firm or corporation.

4.9. Conflicting Information from Bidder

The information and/or pricing provided by the Bidder in the required bid form and attachments will control in the event of a conflict with any information and/or pricing the Bidder types into RTD’s online supplier portal when submitting the bid.

4.10. Content Requirements

All bids must include the electronically acknowledged Addenda. Failure to electronically acknowledge any and all addenda in the online procurement portal may cause the bid to be rejected as non-responsive.

In addition to any information required elsewhere in this IFB and by the Scope of Work and specifications, if any, all bids shall contain the information required in the BID

CONTENTS CHECKLIST (FORMS TO BE SUBMITTED) section.

4.11. Prices Quoted and Discrepancies

All prices must be quoted at a firm price, FOB, Regional Transportation District CML

Storage Yard, 1721 W. Colfax Avenue, Denver, CO 80204, delivered to and accepted by

RTD through RTD's online procurement portal. Where both the written word and numerical dollar amounts are reflected on the bid form, the written word amount is the amount that controls and that shall be publicly read. In cases of discrepancy between the unit price and the computed total price, the unit price alone will be considered as representing the Bidder’s intention.

5. AWARD PROCESS

5.1. Evaluation Criteria

Bids will be evaluated based on the responsive, responsible low Bidder.

5.2. Notification to Successful Bidder

Award decisions of RTD shall be reduced to writing by the Director of Contracting and

Procurement, or delegate, and shall be final. RTD will notify the successful Bidder, if any, by sending a notice of intent to award, which is subject to any required RTD approval. Following RTD approval, the Contracting Officer will initiate the Contract signature process and then issue the notice to proceed with the executed Contract.

5.3. Notifications to Unsuccessful Bidders

Post-Award Notices of Exclusion. The Procurement Specialist shall notify unsuccessful

Bidders of exclusion from award through RTD’s online procurement portal.

Protests. Bidders must submit protests related to this IFB in writing to Marla Bainbridge, Procurement Specialist, pursuant to the procedures set forth in RTD’s procurement standards manual. Copies of RTD’s protest procedures are available upon request to the

Purchasing Agent. Bidders must exhaust all administrative remedies prescribed by

RTD’s protest procedures before proceeding to court.

6. LEGAL NOTICE TO BIDDERS

6.1. Organizational Conflict of Interest

A. The bidder shall review the attached Organizational Conflicts of Interest

Disclosure Requirements and submit its Organizational Conflicts of Interest

Certification with the bid.

B. If the bidder prepared or assisted RTD in the preparation of a statement of work, work program, or system specifications to be used in a competitive procurement by RTD, the bidder will be ineligible to supply the same in connection with this

Contract. The bidder may otherwise compete for RTD business on an equal basis with other parties.

C. Except as provided above, if RTD determines that a potential conflict exists, the bidder shall be excluded from award unless the conflict can be avoided or otherwise resolved through the inclusion of a special Contract provision or other appropriate means.

6.2. Insurance and Bond Requirements

Bidders’ attention is directed to the section entitled Insurance and Bond Requirements herein. It is highly recommended that bidders confer with their insurance carriers or brokers in advance of bid submission to determine the availability of bonds, insurance certificates and any endorsements. The cost of such insurance and bonds shall be included in the bid.

6.3. News Releases

RTD’s written approval is required prior to any communication with the press or any public disclosure relating to this IFB or any subsequent awards.

6.4. Pre-award Audit

RTD reserves the right to conduct a pre-award audit to verify labor rates, overhead rates, etc. should RTD determine that such an audit is required prior to negotiation or award of a Contract.

6.5. Cost of Bid Preparation

RTD shall not reimburse bidders for costs incurred for preparation of bids or required documentation.

6.6. Materials Submitted

All materials submitted shall become the property of RTD and will not be returned to the bidder.

6.7. Confidentiality

RTD is a public entity subject to the provisions of the Colorado Open Records Act, C.R.S. § 24-72-200.1 et seq. (“CORA”), and all materials submitted with this IFB, with the exception of trade secrets, privileged information, and confidential commercial, financial, geological, or geophysical data pursuant to C.R.S. § 24-72-204(3)(a)(IV), may become public records subject to inspection by the public at any time after the Contract is executed. Therefore, any confidential or proprietary information that the bidder discloses to RTD with respect to this IFB must be clearly designated as confidential or proprietary at the time of disclosure by the bidder to RTD. RTD shall not disclose properly designated information unless such information is required to be disclosed by law or court order. In the event of a legal challenge to the confidentiality of records so designated by the bidder, RTD shall make reasonable efforts to notify the bidder prior to disclosing any such information, and in some cases may tender to the bidder the defense of any action filed. By submitting a bid under this IFB, the bidder agrees to accept such tender of defense and in all cases assumes exclusive responsibility for defending its position as to the confidentiality of the requested information. RTD is not obligated to assist in such defense, and cannot and does not guarantee that the confidentiality of records so designated will be upheld by a reviewing court. If the bidder fails to submit a copy of its redacted bid that may be released under

CORA, the bidder acknowledges that RTD has the authority to disclose, and may disclose in its discretion, any information contained in the bid in response to a CORA request.

6.8. Rights Reserved to RTD

A. All bidders are notified that the award of a Contract pursuant to this IFB is dependent upon execution of a Contract with the successful bidder(s) and appropriation by RTD’s Board of Directors of the necessary funds. Successful bidders must be prepared to execute the Contract that is provided with this IFB.

FAILURE TO ACCEPT THE TERMS AND CONDITIONS IN THIS

SOLICITATION MAY RESULT IN A BIDDER BEING DEEMED NON-

RESPONSIVE.

B. It is the intent of RTD to make an award within 30 days from the bid due date;

however, all bids shall be valid for no less than ninety (90) days.

C. RTD reserves the right to postpone the bid opening for its own convenience.

D. Issuance of this IFB does not commit RTD to award the Contract. RTD reserves the right to reject all bids and re-solicit or cancel this IFB if deemed by RTD to be in its best interest.

6.9. Prohibited Interests

A. No employee of RTD or any member of its governing body shall have any personal or financial interest, direct or indirect, in this Contract or any contract executed subsequently in connection with this Contract during his or her tenure or for one year thereafter. No director, officer, employee, or agent of RTD shall be interested in any contract or transaction with RTD except in his or her official representative capacity.

B. No member of or delegate to Congress, or resident commissioner, shall be admitted to any share or part of any Contract awarded, or to any benefit arising from it.

6.10. Competition in Subcontracting

Bidders shall select subcontractors (including suppliers) on a competitive basis to the maximum practicable extent consistent with the objectives and requirements of any

Contract awarded.

6.11. Personnel Availability

By submitting its bid, the bidder certifies that it and each of its subcontractors possess an adequate supply of workers qualified to perform the work specified within the

Contract schedule; that there is no existing or impending dispute between it and any labor organization; and that it is prepared to comply fully with prevailing wage requirements, minimum wages, maximum hours of work, and equal opportunity provisions contained in the Contract Terms and Conditions.

7. BID CONTENTS CHECKLIST (FORMS TO BE SUBMITTED)

Note to Respondents: In order to download the submittal forms in the

"Forms to be Completed and Submittal Requirements section," Respondents must download them directly from the online procurement portal.

Please only include cost in designated "cost" sections, or cost table if provided. Any cost information submitted or duplicated in other sections may result in response disqualification.

7.1. In addition to any information required elsewhere in this Solicitation and in the Scope of Work, all responses shall contain and will be evaluated based on the following sections:

7.1.1. Name and Title of Individual(s) Authorized to Sign the Contract* Please enter the full name(s) and title(s) and email address(es) of the individual(s) authorized to sign the contract if awarded to your company. Only list multiple names if multiple individuals are required to sign.

*Response required

7.1.2. Name and Title of Respondent’s Authorized Official*

The following questions are prepared in electronic format, and the Respondent is required to respond in this format. All required certifications, documentation, and response information below shall be answered and provided by an authorized official with binding authority. Electronic selections and confirmations shall be as binding as a signature from the authorized official submitting this response on behalf of the

Respondent.

Please type the full name and title of the authorized official electronically submitting this response.

*Response required

7.1.3. I certify that I have read, understood, and agree to be bound to the terms in the General Instructions, Solicitation Instructions, Award Process, and Legal Notice in this solicitation, and that I am authorized to submit this response on behalf of my organization.*

☐ Please confirm

*Response required

7.1.4. I certify that I have read, understood and agree, on behalf of the firm submitting this response, to the terms and conditions including, but not limited to, the insurance requirements set forth herein with the exception of any modification requests approved by RTD during the Q&A period.*

☐ Please confirm

*Response required

7.1.5. Open Records Copy of Bid

Submit your Open Records Copy of Bid per the instructions in the solicitation.

THIS SECTION IS FOR COST ONLY. PLEASE DO NOT INCLUDE ANY

ADDITIONAL INFORMATION HERE.

7.1.6. ORGANIZATIONAL CONFLICT OF INTEREST DISCLOSURE REQUIREMENTS*

A. Organizational conflict of interest means that, because of other activities or relationships with other persons, a person is unable or potentially unable to render impartial assistance or advice to RTD, or the person's objectivity in performing the Work is or might be otherwise impaired, or a person has an unfair competitive advantage.

B. Each firm responding to the Solicitation shall provide the statement described in paragraph (c). This requirement will apply individually to any of the firm’s consultants or lower-tier subcontractors that also furnish Work in performance of the Contract to be awarded.

C. The statement must contain the following:

1. Name of the firm and the number of the Solicitation in question.

2. The name, address, telephone number, and federal taxpayer identification number, if applicable, of the firm.

3. A description of the nature of the Work rendered by or to be rendered on the

Contract or related to the Contract.

4. A statement of any past (within the past 12 months), present, or currently planned financial, contractual, organizational, or other interests relating to the performance of the Contract. For contractual interests, such statement must include the name, address, and telephone number of the client or client(s), a description of the services rendered to the previous client(s), and the name of a responsible officer or employee of the firm who is knowledgeable about the services rendered to each client, if, in the 12 months preceding the date of the statement, services were rendered to RTD or any other client respecting the same subject matter of the Solicitation or directly relating to such subject matter. The client and contract number under which the services were rendered must also be included, if applicable. For financial interests, the statement must include the nature and extent of the interest and any entity or entities involved in the financial relationship. For these and any other interests, enough information must be provided to allow a meaningful evaluation of the potential effect of the interest on the performance of the

Contract.

5. A statement that no actual or potential conflict of interest or unfair competitive advantage exists with respect to the Work to be provided in connection with the Contract or that any actual or potential conflict of interest or unfair competitive advantage that does or may exist with respect to the

Contract or related to the Contract has been communicated as part of the statement required by section (c).

D. Failure of a firm to provide the required statement may result in the firm being determined ineligible for award. Misrepresentation or failure to report any fact may result in the assessment of penalties associated with false statements or such other provisions provided for by law or regulation.

ORGANIZATIONAL CONFLICT OF INTEREST CERTIFICATION

If the Respondent is aware of information bearing on whether a potential conflict may exist, the Respondent shall provide a disclosure statement describing this information as described in the Disclosure Requirements above.

☐ The Respondent IS aware of any information bearing on the existence of any potential organizational conflict of interest as described in the Disclosure Requirements.

☐ The Respondent IS NOT aware of any information bearing on the existence of any potential organizational conflict of interest as described in the Disclosure Requirements.

*Response required

7.1.7. Current W9 *

Please download the below documents, complete, and upload.

• 02.12_W9_updated_1822.pdf

*Response required

7.1.8. KEY PERSONNEL*

Please download the below documents, complete, and upload.

• Key_Personnel.docx

*Response required https://procure-now.s3.us-west-2.amazonaws.com/shared-sections/production/36/2715a66a-0788-44f4-923d-4592ac83cb02_02.12_W9_updated_1822.pdf?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=ASIA47RIURE4OAEGH6HC%2F20260917%2Fus-west-2%2Fs3%2Faws4_request&X-Amz-Date=20260917T173405Z&X-Amz-Expires=72000&X-Amz-Security-Token=IQoJb3JpZ2luX2VjEGgaCXVzLXdlc3QtMiJIMEYCIQCppeEtpb0vN%2BKfpuDa%2F6Tl2kfHVAzoAHgFlzagiX9k5wIhAM5rL6q%2FSeGfkvo%2BVPAY1%2FnuVZnwNIKGSoX9VCX0mlHPKowFCDEQAhoMODkyMzY0Njg3NjcyIgxJs6IXEszCsfY83bgq6QQoh6mV2BuYbtZyBsc1W0HwRn3b7t52sQm3VlKq%2Ftd4j25yvNAPZlcsGZ4tj3Y4wfdTLOxDD2BxgEBZ0EVzy4uDGQg4JCd1zkCcrVJWsP%2F3HOGVY4K9dKH%2Fd5w%2FaW8OUfOofaYLAj120PyimwoiB9c%2FmqLwl6QfAFmdu99EfMhMrFfjkNREllbv6eF4BwHzSQgGLg6riTFDjFs0ZH5KXBa23DQxJ407fpJpRzO3dhTWOi5HOuA43R3duqFoN0DxaRlvkfUgqsM%2BX3RmHGr7iR0J6Vffq%2Bt1KZroZJZiJG5KrZ28GndFa9LaB1TAigJ8iSuUw2O5Q%2FSDrcOYaSlPhpcCdDndNZJd%2Fb5Qb%2BzX9Urnx04AKvOYfBGl9JAHPrDdIlvETnL3IaECDeUGrrZmH%2Bmi11p7YBd%2BZgC27OqxT6XgF08sQ1iUmRMt9MKQ%2FyGv%2BZJMJdf5fDHa4ZPufwk6ZL%2Bz0JMqq%2FPZU6N05q7OP9%2BWeEAjhy5owIuXrXTcPVJ8LRh%2BybR92mH0edqC636fcKjGWVTULnm8AG9M8mN4PMuj2etXAweRaZNFQ6oxh7WEiTVUO%2BpofIEqjW2sh1xJyE9xkI9LFevRGmGm4w090UaN7seOgZOKh6zr4vtM1GGG5wtkO8wrW%2B6NcEzJR6OjkknIxUh%2Bi0nMRRRXACIzSKrFPdRrByCytF1vxMr6MPICaYxK3PjRJ1DZtUO48%2F8BvS0K1pgImzJF67MEUg49eQLrrRpmGsKHHmgAO7DsN%2FPWnJSDXH4ZPtg3FJReks9PSRiJv6dUXHzWXQY3UJ83c9pTBBVoH3TpDxDYZTDEpLDVBjqYAaG%2F8Qdizb9nUPrppKkZlEgBdMAuyTWqJlyqGX6XVhwfd2XWNot8ax9RZNVoHKzlUck6E66G420Cl%2FgnmyAoAF%2B3S5GXRROc%2F%2BuUwXxx8vV7Co9gN9S4YmLvYf9fMiiMVSAgnNMCyCz2Au7ctv3YL2Lk0mg49S5CuZotg5DpI4fSfjQ9WQNRfL8HL3cPnwPfDOUZaZoXRB5I&X-Amz-Signature=5917f8cc8328d204f588a6593094a7306fa6c451a93d9364117fe6fd5c91bdaa&X-Amz-SignedHeaders=host&response-content-disposition=attachment%3B%20filename%3D%2202.12_W9_updated_1822.pdf%22&x-id=GetObject https://procure-now.s3.us-west-2.amazonaws.com/shared-sections/production/36/387664a0-f1d1-4e62-b529-fc5284b50777_Key_Personnel.docx?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Credential=ASIA47RIURE4OAEGH6HC%2F20260917%2Fus-west-2%2Fs3%2Faws4_request&X-Amz-Date=20260917T173405Z&X-Amz-Expires=72000&X-Amz-Security-Token=IQoJb3JpZ2luX2VjEGgaCXVzLXdlc3QtMiJIMEYCIQCppeEtpb0vN%2BKfpuDa%2F6Tl2kfHVAzoAHgFlzagiX9k5wIhAM5rL6q%2FSeGfkvo%2BVPAY1%2FnuVZnwNIKGSoX9VCX0mlHPKowFCDEQAhoMODkyMzY0Njg3NjcyIgxJs6IXEszCsfY83bgq6QQoh6mV2BuYbtZyBsc1W0HwRn3b7t52sQm3VlKq%2Ftd4j25yvNAPZlcsGZ4tj3Y4wfdTLOxDD2BxgEBZ0EVzy4uDGQg4JCd1zkCcrVJWsP%2F3HOGVY4K9dKH%2Fd5w%2FaW8OUfOofaYLAj120PyimwoiB9c%2FmqLwl6QfAFmdu99EfMhMrFfjkNREllbv6eF4BwHzSQgGLg6riTFDjFs0ZH5KXBa23DQxJ407fpJpRzO3dhTWOi5HOuA43R3duqFoN0DxaRlvkfUgqsM%2BX3RmHGr7iR0J6Vffq%2Bt1KZroZJZiJG5KrZ28GndFa9LaB1TAigJ8iSuUw2O5Q%2FSDrcOYaSlPhpcCdDndNZJd%2Fb5Qb%2BzX9Urnx04AKvOYfBGl9JAHPrDdIlvETnL3IaECDeUGrrZmH%2Bmi11p7YBd%2BZgC27OqxT6XgF08sQ1iUmRMt9MKQ%2FyGv%2BZJMJdf5fDHa4ZPufwk6ZL%2Bz0JMqq%2FPZU6N05q7OP9%2BWeEAjhy5owIuXrXTcPVJ8LRh%2BybR92mH0edqC636fcKjGWVTULnm8AG9M8mN4PMuj2etXAweRaZNFQ6oxh7WEiTVUO%2BpofIEqjW2sh1xJyE9xkI9LFevRGmGm4w090UaN7seOgZOKh6zr4vtM1GGG5wtkO8wrW%2B6NcEzJR6OjkknIxUh%2Bi0nMRRRXACIzSKrFPdRrByCytF1vxMr6MPICaYxK3PjRJ1DZtUO48%2F8BvS0K1pgImzJF67MEUg49eQLrrRpmGsKHHmgAO7DsN%2FPWnJSDXH4ZPtg3FJReks9PSRiJv6dUXHzWXQY3UJ83c9pTBBVoH3TpDxDYZTDEpLDVBjqYAaG%2F8Qdizb9nUPrppKkZlEgBdMAuyTWqJlyqGX6XVhwfd2XWNot8ax9RZNVoHKzlUck6E66G420Cl%2FgnmyAoAF%2B3S5GXRROc%2F%2BuUwXxx8vV7Co9gN9S4YmLvYf9fMiiMVSAgnNMCyCz2Au7ctv3YL2Lk0mg49S5CuZotg5DpI4fSfjQ9WQNRfL8HL3cPnwPfDOUZaZoXRB5I&X-Amz-Signature=8e8df12e7793d94c76adaa5cbfeb72d2338f48ca0134ae53a78b6f18cb86a08c&X-Amz-SignedHeaders=host&response-content-disposition=attachment%3B%20filename%3D%22Key_Personnel.docx%22&x-id=GetObject

7.1.9. The Respondent understands that any condition stated above, clarification of the above, or information submitted on or with this form other than requested will render the quotation non-responsive.*

☐ Please confirm

*Response required

8. PRICING FORM

COLFAX RAIL REPLACEMENT TRACK MATERIALS

Line Item Description Quantity Unit of

Measure Unit Cost Total

1 Pre-curved running and restraining rail for Curve TAC2 (including spirals)

1 ea

2 Pre-curved running and restraining rail for Curve TBC3 (including spirals)

1 ea

3 Insulated Joint Kit – Single Rail 4 ea

4 4 EA – Insulated Joint Kit – Double

Rail 4 ea

TOTAL

9. SCOPE OF WORK SERVICES/TECHNICAL SPECIFICATIONS

See Attachments for the Scope of Work/Technical Specifications.

9.1. Scope of Work

See attachment A