CN-370000-AD631-A1.pdf

Contract No. ADM631 Amendment No. 1

Rev. 04/11/18

AMENDMENT NO. 1

TO CONTRACT NO. ADM631

BETWEEN

FLORIDA DEPARTMENT OF ENVIRONMENTAL PROTECTION

AND

THE SHOE BOX OF TALLAHASSEE, INC.

This Amendment to Contract No. ADM631 (Contract) is made by and between the Department of Environmental Protection (Department), an agency of the State of Florida, and The Shoe Box of Tallahassee, Inc., 2820 South Monroe Street, Tallahassee, Florida 32301 (Contractor), on the date last signed below.

WHEREAS, the Department entered into the Contract with the Contractor to provide uniforms and clothing apparel effective July 1, 2015; and

WHEREAS, the parties wish to amend the specifications to allow for purchases that incorporate the new logo design; and

WHEREAS, the Contractor has requested an increase its pricing in accordance with the Contract, and the Department finds such an increase to be reasonable; and

WHEREAS, the parties wish to amend the Contract as otherwise set forth herein.

NOW THEREFORE, the parties agree as follows:

1. In accordance with Section 3.02, Uniforms and Clothing Apparel Requirements, which provides the right to modify or add additional specifications to the Contract. Exhibit B, Uniform and Clothing Apparel Specifications, is hereby deleted in its entirety and replaced with Exhibit B-1, Revised Uniform and Clothing Apparel Specifications, attached hereto and made part of this Contract. All references in the Contract to Exhibit B shall hereinafter refer to Exhibit B- 1, Revised Uniform and Clothing Apparel Specifications, as appropriate.

2. In accordance with Section 3.24, Price Increase / Decrease, which provides for an increase in rates. Exhibit C, Contractor’s Response Form, is hereby deleted in its entirety and replaced with Exhibit C-1, Revised Contractor’s Response Form, attached hereto and made part of this Contract. All references in the Contract to Exhibit C shall hereinafter refer to Exhibit C-1, Revised Contractor’s Response Form, as appropriate.

3. Exhibit A, Public Records Requirements, as attached to this Amendment, is hereby incorporated into the Contract.

4. Paragraph 8 is hereby deleted in its entirety and replaced with the following:

NOTICE. All notices and written communication between the parties shall be sent by electronic mail, U.S. Mail, a courier delivery service, or delivered in person. Notices shall be considered delivered when reflected by an electronic mail read receipt, a courier service delivery receipt, other mail service delivery receipt, or when receipt is acknowledged by recipient.

5. Paragraph 9 is hereby deleted in its entirety and replaced with the following:

IDENTIFICATION OF CONTRACT MANAGERS. All matters shall be directed to the Contract Managers for appropriate action or disposition. Any changes to the Contract Manager information identified below must be noticed, in writing, to the other party within ten (10) calendar days of the change. Either party may provide notice to the other party by email identifying a change of a designated Contract Manager and providing the new contact information for the newly designated Contract Manager. Such notice is sufficient to effectuate this change without requiring a written amendment to the Contract. Department and the Contractor Contract Managers and contact information are provided below:

Rev. 04/11/18

Contractor Department The Shoe Box of Tallahassee, Inc. Department of Environmental Protection 2820 South Monroe Street Office of the Secretary Tallahassee, Florida 32301 3800 Commonwealth Blvd, MS# 10 Attn: Geof Weldon Tallahassee, Florida 32399-3000 Phone Number: (850) 877-9174 Attn: Amanda Hartsfield Email: shoetally@gmail.com Phone Number: (850) 245-2048 Email: Amanda.hartsfield@dep.state.fl.us

6. Paragraph 36 is hereby deleted in its entirety and replaced with the following:

MyFloridaMarketPlace Transaction Fee.

A. The State of Florida through the Department of Management Services (DMS), has instituted

MyFloridaMarketPlace (MFMP), a statewide e-procurement system. Pursuant to Section 287.057(22)(c), F.S., all payments shall be assessed a Transaction Fee which the Contractor shall pay the State unless exempt pursuant to Rule 60A-1.031, Florida Administrative Code (F.A.C.).

B. For payments within the State accounting system (FLAIR or its successor), the Transaction Fee shall, when possible, be automatically deducted from payments to the Contractor. If automatic deduction is not possible, the Contractor shall pay the Transaction Fee pursuant to Rule 60A-1.031, F.A.C. By submission of these reports and corresponding payments, the Contractor certifies their correctness. All such reports and payments shall be subject to audit by the State or its designee.

C. Contractor shall receive a credit for any Transaction Fee paid by the Contractor for the purchase of any item(s) if such item(s) is/are returned to the Contractor through no fault, act, or omission of the Contractor.

Notwithstanding the foregoing, a Transaction Fee is non-refundable when an item is rejected, returned, or declined, due to the Contractor’s failure to perform or comply with specifications or requirements of this Contract.

D. Failure to comply with these requirements shall constitute grounds for declaring the Contractor in default and recovering re-procurement costs from the Contractor in addition to all outstanding fees. CONTRACTORS THAT ARE DELINQUENT IN PAYING TRANSACTION FEES MAY BE EXCLUDED FROM CONDUCTING FUTURE BUSINESS

WITH THE STATE.

7. The following provision is hereby added to the Contract as a new paragraph 46:

Inspector General Audit Cooperation. The Contractor understands its duty, pursuant to subsection 20.055(5), F.S., to cooperate with the inspector general in any investigation, audit, inspection, review, or hearing. The Contractor will comply with this duty and ensure that its subcontracts issued under this Contract, if any, impose this requirement, in writing, on its subcontractors.

8. The following provision is hereby added to the Contract as a new paragraph 47:

SCRUTINIZED COMPANIES.

A. Contractor certifies that it is not on the Scrutinized Companies that Boycott Israel List or engaged in a boycott of

Israel. Pursuant to Section 287.135, F.S., the Department may immediately terminate this Contract at its sole option if the Contractor is found to have submitted a false certification; or if the Contractor is placed on the Scrutinized Companies that Boycott Israel List or is engaged in the boycott of Israel during the term of the Contract.

B. If this Contract is for more than one million dollars, the Contractor certifies that it is also not on the Scrutinized Companies with Activities in Sudan, Scrutinized Companies with Activities in the Iran Petroleum Energy Sector List, or engaged with business operations in Cuba or Syria as identified in Section 287.135, F.S. Pursuant to Section 287.135, F.S., the Department may immediately terminate this Contract at its sole option if the mailto:shoetally@gmail.com mailto:Amanda.hartsfield@dep.state.fl.us

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 1 of 35

EXHIBIT B-1

SECTION 6.00 – UNIFORM AND CLOTHING APPAREL SPECIFICATIONS

Table of Contents:

6.01 Department of Environment Protection – Lot 1;

6.02 Office of Emergency Response (OER) – Lot 2.

6.01. DEPARTMENT OF ENVIRONMENT PROTECTION – DEPARTMENT WIDE IDENTIFICATION CLOTHING – LOT 1.

6. 01.01. Emblem and Embroidering:

A. DEPARTMENT OF ENVIRONMENTAL PROTECTION EMBLEM – CUSTOMIZATION OPTION #1:

The Department shall provide the contractor with the Emblem specifications at the time of contract execution.

• Stitches: 13,509

• Colors: 5

• Color changes: 6

• Stops: 0

• Machine: Tajima

• Trims: 8

• Left: 32.51mm

• Right: 32.51mm

• Up: 32.51 mm

• Down: 32.51mm

• EndX: 0.00 in

• EndY: 0.00 in

• Max Stitch: 12mm

• Min Stitch: 0.2mm

• Max Jump: 6.9mm

• Colorway:

# Brand Descr Code

1. Madeira 1153

2. Madeira 1024

3. Madeira 1103

4. Madeira 1095

5. Madeira 1001

6. Madeira 1103

• Total Bobbin: 676.63 inches

• Embroidering SAMPLE (not actual size):

Assessment and Restoration

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 2 of 35

B. FLORIDA’S AQUATIC PRESERVES EMBLEM – CUSTOMIZATION OPTION #2:

The Department shall provide the contractor with the Emblem specifications at the time of contract execution.

• Stitches: 11583

• Colors: 4

• Color changes: 5

• Stops: 6

• Machine: Tajima

• Trims: 28

• Left: 50.9 mm

• Right: 50.9 mm

• Up: 29.4 mm

• Down: 29.4 mm

• EndX: 0.00 in

• EndY: 0.00 in

• Max Stitch: 6.8 mm

• Min Stitch: 0.4 mm

• Max Jump: 6.8 mm

• Colorway: Colorway 1

# C St. Descr Code

1. 14 1134 1988 Brand: Madeira PolyNeon 40

2. 7 1024 1733 Brand: Madeira PolyNeon 40

3. 31 1388 1801 Brand: Madeira PolyNeon 40

4. 14 784 1988 Brand: Madeira PolyNeon 40

5. 7 2599 1733 Brand: Madeira PolyNeon 40

6. 8 4652 1 742 Brand: Madeira PolyNeon 40

• Total Bobbin: 49.60ft

• Sample (not actual size):

C. EMBROIDERING – CUSTOMIZATION OPTION #3:

The Department shall provide the contractor with the Embroidering specifications at the time of contract execution. The Embroidering will be a flat rate for a maximum of twenty-five (25) character (letters, symbols and spaces). Each additional character shall be an additional cost.

OTHER USERS LOGO, EMBROIDERING, EMBLEM – CUSTOMIZATION: (Non – Department of Environmental Protection) The Department shall provide the contractor with the Embroidering specifications before receiving the first order requiring any customization. The Embroidering will be a flat rate which will be determined upon receiving the departments logo requirements, for a maximum of twenty-five (25) character (letters, symbols and spaces). Each additional character shall be an additional cost.

6. 01.02. Women’s Apparel:

A. SHIRT – DRESS SHIRTS – LONG SLEEVES:

• FABRIC: 100% Cotton

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SIZE: Petite, Misses, Plus Size availability

• SPECIFIC FEATURES: Wrinkle Free, No Iron, Adjustable Cuffs, Narrow Placket and Pearlized Buttons

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 3 of 35

• PACKAGING: Shirts are individually poly-bagged.

• CUSTOMIZATION – OPTION: Section 6.01.01

• SAMPLE:

B. SHIRT – DRESS SHIRTS – SHORT SLEEVE:

• FABRIC: 100% Cotton

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SIZE: Petite, Misses, Plus Size availability

• SPECIFIC FEATURES: Wrinkle Free, No Iron, Narrow Placket and Pearlized Buttons

• PACKAGING: Shirts are individually poly-bagged.

C. SHIRT – FIELD SHIRTS

1. COLUMBIA BAHAMA LONG SLEEVE (REGULAR SIZES)

• Sizes Small through XLG

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 30.

• FABRIC: Omni-Shade 100% Nylon

• STYLE: Women

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 30, has the roll up sleeves, and has a pocket front or zipped pocket

• CUSTOMIZATION OPTION: Section 6.01.01

• SAMPLES:

2. COLUMBIA BAHAMA LONG SLEEVE (EXTENDED SIZES)

• Sizes 2XL & 3XL

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 30.

• FABRIC: Omni-Shade 100% Nylon

• STYLE: Women

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 4 of 35

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 30, has the roll up sleeves, and has a pocket front or zipped pocket

• CUSTOMIZATION - OPTION: Section 6.01.01

3. COLUMBIA TAMIAMI LONG SLEEVE (REGULAR SIZES)

• Sizes Small through XLG

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• STYLE: Women

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 40, has the roll up sleeves, and has a pocket front or side zipped pocket

4. COLUMBIA TAMIAMI LONG SLEEVE (EXTENDED SIZES)

• Sizes 2XL & 3XL

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• STYLE: Women

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 40, has the roll up sleeves, and has a pocket front or side zipped pocket

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 5 of 35

5. COLUMBIA TAMIAMI SHORT SLEEVE (REGULAR SIZES)

• Sizes Small through XLG

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• STYLE: Women

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 40 and has a pocket front or side zipped pocket

• CUSTOMIZATION - OPTION: Section 6.01.01

• SAMPLES:

6. COLUMBIA TAMIAMI SHORT SLEEVE (EXTENDED SIZES)

• Sizes 2XL & 3XL

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• STYLE: Women

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 40 and has a pocket front or side zipped pocket

• CUSTOMIZATION - OPTION: Section 6.01.01

• SAMPLES:

D. SHIRT – POLO’S – SHORT SLEEVE:

1. 100% COTTON POLO

• FABRIC: 100% Cotton

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality.

• DESIGN: The polo has such features as: cutting edge fabric performance, dyed-to-match no-curl collar, 3-button placket, raglan sleeves, seamless-gusset straight side panels with bottom vents, double-layer back sweat patch and twill tape reinforced collar, raglan sleeve and side vent seams.

• FRONT: Center placket finishes 1¼” wide X 6½” long. Both the top and bottom plackets have fusible interlining. The top placket is edge stitched and has a ½” horizontal box-stitch at the bottom. The top button hole is horizontal and positioned ½” below the top edge. The 2nd and 3rd button holes are vertical. The 2nd button is placed 2” below the top button and the 3rd button is placed 2” below the 2nd button. All button holes measure 5/8” wide. The bottom placket is edge stitched on all sides and has three buttons that correspond with the buttonholes on the top placket. The 19-Ligne, 4-eye buttons match the body and are pearlized. The inside bottom edge of the placket is neatly serged to finish.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 6 of 35

• COLLAR: The collar is ribbed knit and dyed-to-match the body fabric. The collar measures 3” wide at center back and 2½” wide at each collar point. Each collar point contains a concealed Mylar stay, preventing “collar point curl-up”. The collar seam is reinforced with 3/8” wide dyed-to-match, 100% cotton twill tape.

• SLEEVES: The polo features raglan style sleeves (upper portion), combined with a straight side panel, seamless gusset (bottom portion), providing 360º range of movement. Raglan seams are reinforced with 3/8” wide dyed-to-match, 100% cotton twill tape. The sleeves are hemmed using a 1” turn up and double needle cover-stitch.

• SIDE PANELS: The polo features straight side panels, extending from the shirt-tail hem to the sleeve hem. This design creates a seamless gusset, providing 360º range of movement. The side panel grades in width, measuring 8¼” at the shirt-tail hem and 5¼” at the sleeve hem. The bottom edge of each panel has a vent reinforced with twill tape, measuring 2½” in length.

• HEM: The bottom of the shirt is hemmed using a 1” turn up and double needle cover-stitch.

• STITCHING: All seams are safety-stitched using 11 to 12 stitches per inch. The collar, raglan sleeve and vent seams are reinforced with 3/8” wide, 100% cotton twill tape. The bottom of the shirt and sleeves are hemmed using a double needle cover-stitch.

• LABELS: The center back label is heat seal applied, containing “The Force™” brand, size, fabric content and country of origin. There is a cloth label on the left interior of the shirt, located 5¼” from the bottom hem, containing style #, country of origin, fabric content, size, vendor information and care instructions.

• HANGTAGS: The hangtag is printed with the style #, size and individual UPC code.

• PACKAGING: Shirts are individually poly-bagged.

2. 100% POLYESTER POLO

• FABRIC: 5.2 Ounce, 100% Polyester

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality.

• DESIGN: The polo is a working woman’s dream: versatile, moisture-wicking and available in a rainbow of vibrant colors to complement any logo. This polo truly delivers with UV protection and exceptional performance. UPF RATING 40.

• FRONT: 3-button, Dyed-to-match buttons, set-on placket with offset buttons and button loops

• COLLAR: Self-fabric collar

• SLEEVES: Short sleeve with double needle, open hemmed stitching on sleeves

• STITCHING: Double-needle stitching on sleeves and hem

• LABELS: The collar has a PORTAUTHORITY label

• HANGTAGS: The hangtag on the collar is printed with the word “Ladies,” the size and manufacturing origin; the hangtag on the side panel has the style #, and fabric content.

• PACKAGING: No packaging.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 7 of 35

E. SHIRT – POLO’S – LONG SLEEVE:

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• DESIGN: The design of this long sleeve, unisex polo has a technical and professional appearance while providing multi-faceted functionality. The polo has such features as: cutting edge fabric performance, dyed-to-match no-curl collar, 3-button placket, raglan sleeves with dyed-to-match rib knit cuffs, seamless-gusset straight side panels with bottom vents, double-layer back sweat patch and twill tape reinforced collar, raglan sleeve and side vent seams.

• FRONT: Center placket finishes 1¼” wide X 6½” long. Both the top and bottom plackets have fusible interlining. The top placket is edge stitched and has a ½” horizontal box-stitch at the bottom. The top button hole is horizontal and positioned ½” below the top edge. The 2nd and 3rd button holes are vertical. The 2nd button is placed 2” below the top button and the 3rd button is placed 2” below the 2nd button. All button holes measure 5/8” wide. The bottom placket is edge stitched on all sides and has three buttons that correspond with the buttonholes on the top placket. The 19-Ligne, 4-eye buttons match the body and are pearlized. The inside bottom edge of the placket is neatly serged to finish.

• COLLAR: The collar is ribbed knit and dyed-to-match the body fabric. The collar measures 3” wide at center back and 2½” wide at each collar point. Each collar point contains a concealed Mylar stay, preventing “collar point curl-up”. The collar seam is reinforced with 3/8” wide dyed-to-match, 100% cotton twill tape.

• SLEEVES: The polo features raglan style sleeves (upper portion), combined with a straight side panel, seamless gusset (bottom portion), providing 360º range of movement. Raglan seams are reinforced with 3/8” wide dyed-to-match, 100% cotton twill tape. The sleeves are finished with dyed-to-match rib knit cuffs finishing 2½” in length.

There is a concealed mic pocket located on each front raglan sleeve seam. This placement is off the top of the shoulder providing “ergonomic” mic placements for those wearers using a radio mic. The pocket is located 3½” from the collar seam. The pocket opening measures 1½” wide and is reinforced on each end with a bartack. The top edge of the interior pocket bag is reinforced, being caught under the raglan sleeve seam twill tape. The remaining 3 sides are serged for a neat finish. The pocket bag measures 2” long X 2½” wide.

There is a two stall double welt pencil pocket centered on the left raglan sleeve, 1 ½” above the sleeve hem. It measures 5 ¾” deep and 1 ¾” wide. The underside of the pocket is turned under and clean finished.

• SIDE PANELS: The polo features straight side panels, extending from the shirt-tail hem to the sleeve cuff.

This design creates a seamless gusset, providing 360º range of movement. The side panel grades in width, measuring 8¼” at the shirt-tail hem and 5¼” at the sleeve hem. The bottom edge of each panel has a vent reinforced with twill tape, measuring 2½” in length.

• HEM: The bottom of the shirt is hemmed using a 1” turn up and double needle cover-stitch.

• STITCHING: All seams are safety-stitched using 11 to 12 stitches per inch. The collar, raglan sleeve and vent seams are reinforced with 3/8” wide, 100% cotton twill tape. The bottom of the shirt is hemmed using a double needle cover-stitch.

• LABELS: The center back label is heat seal applied, containing “The Force™” brand, size, fabric content and country of origin. There is a cloth label on the left interior of the shirt, located 5¼” from the bottom hem, containing style #, country of origin, fabric content, size, vendor information and care instructions.

• HANGTAGS: The hangtag is printed with the style #, size and individual UPC code.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 8 of 35

F. SHIRT – TEE SHIRTS – SHORT SLEEVE:

• DESIGN: Shirt shall be a jersey knit with rib knit crew style neckband. It shall have short sleeves

• FABRIC: 100% Cotton

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• FEATURES:

o 6.1 oz., pre-shrunk 100% cotton o Double-needle stitched neckline and sleeves o Quarter turned

G. SHIRT – TEE SHIRTS – LONG SLEEVE:

• DESCRIPTION: Columbia Professional Fishing Gear (PFG) Long Sleeve Tee

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• BRAND: Columbia or DEP approved equivalent

• VENDOR SPECIFICATIONS

o Made of 100% polyester Omni-wick fabric technology that moves moisture away from the skin and enables quick evaporation to help you stay dry o Provides UPF 50 sun protection against harmful UV rays o Raglan long sleeves - Crew neck

6. 01.03. Men’s Apparel:

A. SHIRT – DRESS SHIRTS – LONG SLEEVE:

• FABRIC: 100% Cotton

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFICS: Wrinkle Free, No Iron, Chest Pocket, Adjustable Cuffs

• SIZES: Regular, Fitted, Big, Tall

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 9 of 35

B. SHIRT – DRESS SHIRTS – SHORT SLEEVE:

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFICS: Wrinkle Free, No Iron, Chest Pocket

• SIZES: Regular, Fitted, Big, Tall

C. SHIRT – FIELD SHIRTS –MUST BE BREATHABLE / VENTILATED

1. COLUMBIA BAHAMA LONG SLEEVE (REGULAR SIZES)

• Sizes Extra Small through 2XL

• BRAND: Columbia Professional Fishing Gear (PFG) or DEP Approved Equivalent

• FABRIC: Omni-Shade 100% Nylon

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFICS: A collared field shirt must be ventilated, must have a UPF 30, has roll up sleeves, and has a pocket front or zipped pocket.

• AVAILABLE SIZES: XS – 4XL

2. COLUMBIA BAHAMA LONG SLEEVE (EXTENDED SIZES)

• Sizes 3XL & 4XL

• BRAND: Columbia Professional Fishing Gear (PFG) or DEP Approved Equivalent

• FABRIC: Omni-Shade 100% Nylon

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFICS: A collared field shirt must be ventilated, must have a UPF 30, has roll up sleeves, and has a pocket front or zipped pocket.

• AVAILABLE SIZES: XS – 4XL

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 10 of 35

3. COLUMBIA BAHAMA LONG SLEEVE (TALL SIZES)

• Tall sizes from Large Tall through 4XL Tall

• BRAND: Columbia Professional Fishing Gear (PFG) or DEP Approved Equivalent

• FABRIC: Omni-Shade 100% Nylon

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFICS: A collared field shirt must be ventilated, must have a UPF 30, has roll up sleeves, and has a pocket front or zipped pocket.

• AVAILABLE SIZES: XS – 4XL

4. COLUMBIA TAMIAMI LONG SLEEVE (REGULAR SIZES)

• Sizes Extra Small through 2XL

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 40, has the roll up sleeves, and has a pocket front or side zipped pocket

5. COLUMBIA TAMIAMI LONG SLEEVE (EXTENDED SIZES)

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 11 of 35

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 40, has the roll up sleeves, and has a pocket front or side zipped pocket

6. COLUMBIA TAMIAMI LONG SLEEVE (TALL SIZES)

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFIC FEATURES: A collared field shirt must be ventilated, has a UPF rating of at least 40, has the roll up sleeves, and has a pocket front or side zipped pocket

7. COLUMBIA TAMIAMI SHORT SLEEVE (REGULAR SIZES)

• Sizes Extra Small through 2XL

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFICS: A collared field shirt must be ventilated, has a UPF rating of at least 40, has the roll up sleeves, and has a pocket front or side zipped pocket.

• AVAILABLE SIZES: XS – 4XL

8. COLUMBIA TAMIAMI SHORT SLEEVE (EXTENDED SIZES)

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 12 of 35

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFICS: A collared field shirt must be ventilated, has a UPF rating of at least 40, has the roll up sleeves, and has a pocket front or side zipped pocket.

• AVAILABLE SIZES: XS – 4XL

9. COLUMBIA TAMIAMI SHORT SLEEVE (TALL SIZES)

• BRAND: Columbia Long Sleeve or DEP Approved Equivalent. Must Be Breathable/Ventilated with

UPF 40.

• FABRIC: Omni-Shade, Omni-Wick 100% polyester ripstop

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• SPECIFICS: A collared field shirt must be ventilated, has a UPF rating of at least 40, has the roll up sleeves, and has a pocket front or side zipped pocket.

• AVAILABLE SIZES: XS – 4XL

D. SHIRT – POLO’S – SHORT SLEEVE:

1. 100% COTTON POLO

• FABRIC: 100% Cotton

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality.

• DESIGN: The polo has such features as: cutting edge fabric performance, dyed-to-match no-curl collar, 3-button placket, raglan sleeves, seamless-gusset straight side panels with bottom vents, double-layer back sweat patch and twill tape reinforced collar, raglan sleeve and side vent seams.

• FRONT: Center placket finishes 1¼” wide X 6½” long. Both the top and bottom plackets have fusible interlining. The top placket is edge stitched and has a ½” horizontal box-stitch at the bottom. The top button hole is horizontal and positioned ½” below the top edge. The 2nd and 3rd button holes are vertical. The 2nd button is placed 2” below the top button and the 3rd button is placed 2” below the 2nd button. All button holes measure 5/8” wide. The bottom placket is edge stitched on all sides and has three buttons that correspond with the buttonholes on the top placket. The 19-Ligne, 4-eye buttons match the body and are pearlized. The inside bottom edge of the placket is neatly serged to finish.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 13 of 35

• COLLAR: The collar is ribbed knit and dyed-to-match the body fabric. The collar measures 3” wide at center back and 2½” wide at each collar point. Each collar point contains a concealed Mylar stay, preventing “collar point curl-up”. The collar seam is reinforced with 3/8” wide dyed-to-match, 100% cotton twill tape.

• SLEEVES: The polo features raglan style sleeves (upper portion), combined with a straight side panel, seamless gusset (bottom portion), providing 360º range of movement. Raglan seams are reinforced with 3/8” wide dyed-to-match, 100% cotton twill tape. The sleeves are hemmed using a 1” turn up and double needle cover-stitch.

• SIDE PANELS: The polo features straight side panels, extending from the shirt-tail hem to the sleeve hem. This design creates a seamless gusset, providing 360º range of movement. The side panel grades in width, measuring 8¼” at the shirt-tail hem and 5¼” at the sleeve hem. The bottom edge of each panel has a vent reinforced with twill tape, measuring 2½” in length.

• HEM: The bottom of the shirt is hemmed using a 1” turn up and double needle cover-stitch.

• STITCHING: All seams are safety-stitched using 11 to 12 stitches per inch. The collar, raglan sleeve and vent seams are reinforced with 3/8” wide, 100% cotton twill tape. The bottom of the shirt and sleeves are hemmed using a double needle cover-stitch.

• LABELS: The center back label is heat seal applied, containing “The Force™” brand, size, fabric content and country of origin. There is a cloth label on the left interior of the shirt, located 5¼” from the bottom hem, containing style #, country of origin, fabric content, size, vendor information and care instructions.

• HANGTAGS: The hangtag is printed with the style #, size and individual UPC code.

• PACKAGING: Shirts are individually poly-bagged.

2. 100% POLYESTER POLO

• FABRIC: 5.2-ounce, 100% polyester

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• DESIGN: This polo is a working person's dream: versatile, moisture-wicking and available in a rainbow of vibrant colors to complement any logo. This polo truly delivers with UV protection and exceptional performance at a real value. UPF RATING 40.

• FRONT: 3-button, dyed to match, set-on placket with edge stitching

• COLLAR: Flat knit collar

• SLEEVES: Short sleeves, with double needle, open hemmed stitching on sleeves

• STITCHING: Double-needle stitching on shoulder, sleeves and hems

• LABELS: The collar has a PORTAUTHORITY label

• HANGTAGS: The hangtag on the collar is printed with size and manufacturing origin; the hangtag on the side panel has the style #, and fabric content.

• PACKAGING: No packaging.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 14 of 35

E. SHIRT – POLO’S – LONG SLEEVE:

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• DESIGN: The design of this long sleeve, unisex polo has a technical and professional appearance while providing multi-faceted functionality. The polo has such features as: cutting edge fabric performance, dyed-to-match no-curl collar, 3-button placket, raglan sleeves with dyed-to-match rib knit cuffs, seamless-gusset straight side panels with bottom vents, 3 mic holders, double-layer back sweat patch and twill tape reinforced collar, raglan sleeve and side vent seams.

• FRONT: Center placket finishes 1¼” wide X 6½” long. Both the top and bottom plackets have fusible interlining. The top placket is edge stitched and has a ½” horizontal box-stitch at the bottom. The top button hole is horizontal and positioned ½” below the top edge. The 2nd and 3rd button holes are vertical.

The 2nd button is placed 2” below the top button and the 3rd button is placed 2” below the 2nd button. All button holes measure 5/8” wide. The bottom placket is edge stitched on all sides and has three buttons that correspond with the buttonholes on the top placket. The 19-Ligne, 4-eye buttons match the body and are pearlized. The inside bottom edge of the placket is neatly serged to finish.

• COLLAR: The collar is ribbed knit and dyed-to-match the body fabric. The collar measures 3” wide at center back and 2½” wide at each collar point. Each collar point contains a concealed Mylar stay, preventing “collar point curl-up”. The collar seam is reinforced with 3/8” wide dyed-to-match, 100% cotton twill tape.

• SLEEVES: The polo features raglan style sleeves (upper portion), combined with a straight side panel, seamless gusset (bottom portion), providing 360º range of movement. Raglan seams are reinforced with 3/8” wide dyed-to-match, 100% cotton twill tape. The sleeves are finished with dyed-to-match rib knit cuffs finishing 2½” in length.

There is a concealed mic pocket located on each front raglan sleeve seam. This placement is off the top of the shoulder providing “ergonomic” mic placements for those wearers using a radio mic. The pocket is located 3½” from the collar seam. The pocket opening measures 1½” wide and is reinforced on each end with a bartack. The top edge of the interior pocket bag is reinforced, being caught under the raglan sleeve seam twill tape. The remaining 3 sides are serged for a neat finish. The pocket bag measures 2” long X 2½” wide.

There is a two stall double welt pencil pocket centered on the left raglan sleeve, 1 ½” above the sleeve hem.

It measures 5 ¾” deep and 1 ¾” wide. The underside of the pocket is turned under and clean finished.

• SIDE PANELS: The polo features straight side panels, extending from the shirt-tail hem to the sleeve cuff. This design creates a seamless gusset, providing 360º range of movement. The side panel grades in width, measuring 8¼” at the shirt-tail hem and 5¼” at the sleeve hem. The bottom edge of each panel has a vent reinforced with twill tape, measuring 2½” in length.

• HEM: The bottom of the shirt is hemmed using a 1” turn up and double needle cover-stitch.

• STITCHING: All seams are safety-stitched using 11 to 12 stitches per inch. The collar, raglan sleeve and vent seams are reinforced with 3/8” wide, 100% cotton twill tape. The bottom of the shirt is hemmed using a double needle cover-stitch.

• LABELS: The center back label is heat seal applied, containing “The Force™” brand, size, fabric content and country of origin. There is a cloth label on the left interior of the shirt, located 5¼” from the bottom hem, containing style #, country of origin, fabric content, size, vendor information and care instructions.

• HANGTAGS: The hangtag is printed with the style #, size and individual UPC code.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 15 of 35

F. SHIRT – TEE SHIRTS – SHORT SLEEVE:

• FABRIC: 100% Cotton

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality.

• FEATURES:

o 6.1 Oz., Pre-Shrunk 100% Cotton o Double-Needle Stitched Neckline and Sleeves o Quarter Turned

G. SHIRT – TEE SHIRTS – LONG SLEEVE:

1. COLUMBIA TERMINAL TACKLE (REGULAR SIZES)

• BRAND: Columbia or DEP Approved Equivalent

• DESCRIPTION: Columbia Professional Fishing Gear (PFG) Long Sleeve Tee

• FABRIC: Made of 100% polyester Omni-wick fabric technology that moves moisture away from the skin and enables quick evaporation to help you stay dry

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• VENDOR SPECIFICATIONS:

o Provides UPF 50 sun protection against harmful UV rays o Raglan long sleeves - Crew neck

• CUSTOMIZATION – OPTION: Section 6.01.01

• SIZES: Small through 2XL

2. COLUMBIA TERMINAL TACKLE (EXTENDED SIZES)

• BRAND: Columbia or DEP Approved Equivalent

• DESCRIPTION: Columbia Professional Fishing Gear (PFG) Long Sleeve Tee

• FABRIC: Made of 100% polyester Omni-wick fabric technology that moves moisture away from the skin and enables quick evaporation to help you stay dry

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• VENDOR SPECIFICATIONS:

o Provides UPF 50 sun protection against harmful UV rays o Raglan long sleeves - Crew neck

• SIZES: 3XL & 4XL

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 16 of 35

3. COLUMBIA TERMINAL TACKLE (TALL SIZES)

• BRAND: Columbia or DEP Approved Equivalent

• DESCRIPTION: Columbia Professional Fishing Gear (PFG) Long Sleeve Tee

• FABRIC: Made of 100% polyester Omni-wick fabric technology that moves moisture away from the skin and enables quick evaporation to help you stay dry

• COLOR: Color to be determined. Vendor to provide all color options available for this fabric, style and quality

• VENDOR SPECIFICATIONS:

o Provides UPF 50 sun protection against harmful UV rays o Raglan long sleeves - Crew neck

• CUSTOMIZATION – OPTION: Section 6.01.01

• SIZES: Tall sizes from Large to 4XL

6. 01.04. Fire Safety Gear & Snake Boots:

A. BOOTS – UNISEX, FPS FIRE BOOTS:

• Unisex, Leather boots with hard, slip-resistant soles (leather, Vibram, or rubber preferred); boots to be non-steel toed, lace-up and at least 8” tall. High heel and low heel options preferred.

• BOOT SAMPLE:

B. BOOTS – UNISEX, THOROGOOD FIRE BOOT:

• VENDOR: Thorogood or DEP Approved Equivalent

• VENDOR STYLE: Style # 834-6381, made in USA

• DESIGN: Boot shall be black leather calf high with front lace up closure.

• FABRIC: Boot shall be made of genuine leather.

• FEATURES:

o SR Slip Resisting o Made in the USA o WF Wildland Fire Fighting o Upper: Black Panther Oiled Leather, FLAME, and Cut-Resisting Leather.

o Construction: Goodyear Storm Welt o Lining: Dri-Lex� Tongue, Comfort Weave Vamp o Insole: Removable Felt Footbed o Midsole: Rubber and Leather

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 17 of 35 o Shank: Composite Shank for Totally NON-HEAT Conductive Construction o Outsole: Thorogoods Vibram� FIRE Sole o Special Features: Kevlar� Thread. Meets the Requirements of NFPA 1977 Protective Clothing and Equipment for Wildland Fire Fighting. 2005 Edition. UL Certified. Made in USA by ISO 9001 Certified Shoe Company.

C. BRUSH PANTS – 6 OZ.:

1. BRUSH PANTS - 6.0 OZ NOMEX IIIA (REGULAR SIZES)

• SIZES: Small through XLG

• VENDOR STYLE: True North Spruce Green 6.0 oz. Nomex IIIA Brush Pants

• DESCRIPTION: True North Spruce Green 6.0 oz. Nomex IIIA Brush PantsConstructed in accordance with NFPA 1977, current edition, standards for wildland fire fighting protective clothing and UL classified.

Oversized belt loops, 2” elastic back band, two large rear pockets, two bellows thigh pockets with full flap closures, two front slash pockets, hook and loop ankle straps, and self-locking brass zipper fly with snap closure. Stitched with Nomex® thread throughout.

2. BRUSH PANTS - 6.0 OZ NOMEX IIIA (EXTENDED SIZES)

• SIZES: 2XL

• VENDOR STYLE: True North Spruce Green 6.0 oz. Nomex IIIA Brush Pants

• DESCRIPTION: True North Spruce Green 6.0 oz. Nomex IIIA Brush PantsConstructed in accordance with NFPA 1977, current edition, standards for wildland fire fighting protective clothing and UL classified.

Oversized belt loops, 2” elastic back band, two large rear pockets, two bellows thigh pockets with full flap closures, two front slash pockets, hook and loop ankle straps, and self-locking brass zipper fly with snap closure. Stitched with Nomex® thread throughout.

D. BRUSH PANTS – 7 OZ.:

1. BRUSH PANTS – 7 OZ. ADVANCE (REGULAR SIZES)

• SIZES: Small through XLG

• VENDOR STYLE: True North 7 oz. Advance™ Fabric Brush Pants or DEP Approved Equivalent

• DESCRIPTION: Meets NFPA 1977, current edition, standards for wildland fire fighting clothing and UL classified. A two-ply yarn of Nomex IIIA and Kevlar is woven into the “Advance” fabric for outstanding flame resistance, as well as cut and tear protection. The fabric stays strong and flexible even after extreme thermal exposure and remains breathable by absorbing sweat and releasing body heat.

Design features include oversized belt loops, 2” elastic back band, two large rear pockets, two bellows thigh pockets with full flap closures, two front slash pockets, hook and loop ankle straps, and self-locking brass zipper fly with snap closure. Stitched with Nomex thread throughout. Available in Spruce Green or Khaki.Reflective trim options are available.

2. BRUSH PANTS – 7 OZ. ADVANCE (EXTENDED SIZES)

• SIZES: 2XL

• VENDOR STYLE: True North 7 oz. Advance™ Fabric Brush Pants or DEP Approved Equivalent

• DESCRIPTION: Meets NFPA 1977, current edition, standards for wildland fire fighting clothing and UL classified. A two-ply yarn of Nomex IIIA and Kevlar is woven into the “Advance” fabric for outstanding flame resistance, as well as cut and tear protection. The fabric stays strong and flexible even after extreme thermal exposure and remains breathable by absorbing sweat and releasing body heat.

Design features include oversized belt loops, 2” elastic back band, two large rear pockets, two bellows thigh pockets with full flap closures, two front slash pockets, hook and loop ankle straps, and self-locking

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 18 of 35 brass zipper fly with snap closure. Stitched with Nomex thread throughout. Available in Spruce Green or Khaki.Reflective trim options are available.

3. BRUSH PANTS – 7 OZ. TECASAFE PLUS

• SIZES: Small through XLG

• VENDOR STYLE: True North 7 oz. Tecasafe Plus™ Fabric Brush Pants or DEP Approved Equivalent

• DESCRIPTION: Meets NFPA 1977, current edition, standards for wildland fire fighting clothing and UL classified. A two-ply yarn of Nomex IIIA and Kevlar is woven into the “Advance” fabric for outstanding flame resistance, as well as cut and tear protection. The fabric stays strong and flexible even after extreme thermal exposure and remains breathable by absorbing sweat and releasing body heat.

Design features include oversized belt loops, 2” elastic back band, two large rear pockets, two bellows thigh pockets with full flap closures, two front slash pockets, hook and loop ankle straps, and self-locking brass zipper fly with snap closure. Stitched with Nomex thread throughout. Available in Spruce Green or Khaki.Reflective trim options are available.

4. BRUSH PANTS – 7 OZ. TECASAFE PLUS (Extended Sizes)

• SIZES: 2XL

• VENDOR STYLE: True North 7 oz. Tecasafe Plus™ Fabric Brush Pants or DEP Approved Equivalent

• DESCRIPTION: Meets NFPA 1977, current edition, standards for wildland fire fighting clothing and UL classified. A two-ply yarn of Nomex IIIA and Kevlar is woven into the “Advance” fabric for outstanding flame resistance, as well as cut and tear protection. The fabric stays strong and flexible even after extreme thermal exposure and remains breathable by absorbing sweat and releasing body heat.

Design features include oversized belt loops, 2” elastic back band, two large rear pockets, two bellows thigh pockets with full flap closures, two front slash pockets, hook and loop ankle straps, and self-locking brass zipper fly with snap closure. Stitched with Nomex thread throughout. Available in Spruce Green or Khaki.Reflective trim options are available.

E. BRUSH SHIRT:

1. BRUSH SHIRT - 5.8 OZ TECASAFE PLUS (REGULAR SIZES)

• SIZES: Small through XLG

• VENDOR STYLE: True North Tecasafe® Plus Brush Shirt or DEP Approved Equivalent

• DESCRIPTION: True North Tecasafe Plus Brush Shirt, Medium: Designed for optimal functionality on the most high pressure fire lines, these shirts provide superior personal protection with dependable strength that is lightweight, breathable and inherently flame-resistant. Features include: Forest Service style button-front closure; large, spade-style pockets with hook and loop closures; hook and loop closures around the cuff to ensure a tight fit around the glove; extra-long square-cut tails; Nomex® thread throughout; and stress points bartacked at 10 locations. Exceeds NFPA 1977 standard.

• CUSTOMIZATION – OPTION: Section 6.01.01

2. BRUSH SHIRT - 5.8 OZ TECASAFE PLUS (EXTENDED SIZES)

• SIZES: 2XL & 3XL

• VENDOR STYLE: True North Tecasafe® Plus Brush Shirt or DEP Approved Equivalent

• DESCRIPTION: True North Tecasafe Plus Brush Shirt, Medium: Designed for optimal functionality on the most high pressure fire lines, these shirts provide superior personal protection with dependable strength that is lightweight, breathable and inherently flame-resistant. Features include: Forest Service style button-front closure; large, spade-style pockets with hook and loop closures; hook and loop closures around the cuff to ensure a tight fit around the glove; extra-long square-cut tails; Nomex® thread throughout; and stress points bartacked at 10 locations. Exceeds NFPA 1977 standard.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 19 of 35

3. BRUSH SHIRT - 6.0 OZ NOMEX IIIA (REGULAR SIZES)

• SIZES: Small through XLG

• VENDOR STYLE: True North 6.0 oz Nomex IIIA Brush Shirt or DEP Approved Equivalent

• DESCRIPTION: True North Tecasafe Plus Brush Shirt, Medium: Designed for optimal functionality on the most high pressure fire lines, these shirts provide superior personal protection with dependable strength that is lightweight, breathable and inherently flame-resistant. Features include: Forest Service style button-front closure; large, spade-style pockets with hook and loop closures; hook and loop closures around the cuff to ensure a tight fit around the glove; extra-long square-cut tails; Nomex® thread throughout; and stress points bartacked at 10 locations. Exceeds NFPA 1977 standard.

• CUSTOMIZATION – OPTION: Section 6.01.01

4. BRUSH SHIRT - 6.0 OZ NOMEX IIIA (EXTENDED SIZES)

• SIZES: 2XL & 3XL

• VENDOR STYLE: True North 6.0 oz Nomex IIIA Brush Shirt or DEP Approved Equivalent

• DESCRIPTION: True North Tecasafe Plus Brush Shirt, Medium: Designed for optimal functionality on the most high pressure fire lines, these shirts provide superior personal protection with dependable strength that is lightweight, breathable and inherently flame-resistant. Features include: Forest Service style button-front closure; large, spade-style pockets with hook and loop closures; hook and loop closures around the cuff to ensure a tight fit around the glove; extra-long square-cut tails; Nomex® thread throughout; and stress points bartacked at 10 locations. Exceeds NFPA 1977 standard.

• CUSTOMIZATION – OPTION: Section 6.01.01

F. FACE SHROUD:

• VENDOR STYLE: Whiffs Brush Pro Mask or DEP Approved Equivalent

• DESCRIPTION: Excellent for wildland firefighting and perfect for structural overhaul/mop-up. The sleek design of the Brush Pro makes it comfortable to wear, even in hot climates. Made of Advance Nomex®, which carries a 1050° heat rating. The breathing port of the mask is made of Nomex knitted hood material which also carries a 1050° heat rating. Lined with blue Indura® Ultra Soft® cloth with a hydro lone finish to help wick moisture from the firefighter’s face and prevents the transfer of radiant heat to the skin. The black Velcro® attachment point at the bridge of the nose on the outside is used for attaching to goggles. The other three Velcro attachment points on the outside of the mask are used for attaching the optional neck shroud. Machine washable in cold water, hang to dry. Requires Xcaper Professional Filter (23663, sold separately) to assemble a complete unit.

G. HELMET - YELLOW:

• VENDOR STYLE: Bullard® Wildland Fire Fighters’ Helmets with Ratchet Suspension or DEP Approved

Equivalent

• DESCRIPTION: Bullard Wildland Fire Helmet with Ratchet Suspension, Yellow Hat: Delivers electrical insulation required for ANSI Z89.1-1997 Type 1 Class C, E, and G helmet specifications. Other performance standards these helmets meet include NFPA 1977, 1998 Edition; CAL-OSHA; and US-OSHA. Features goggle retainer clips and reflective strips. Accepts brim grip brackets for faceshield visors and screens.

Has an adjustable Nomex® chin strap, goggle clips, underbrim shade, and Velcro® hook fasteners. The date of manufacture is stamped into the bottom side of the brim of hats and caps.

• CUSTOMIZATION – OPTION: Section 6.01.01

H. HELMET - WHITE:

• VENDOR STYLE: Bullard® Wildland Fire Fighters’ Helmets with Ratchet Suspension or DEP Approved

Equivalent

• DESCRIPTION: Bullard Wildland Fire Helmet with Ratchet Suspension, Yellow Hat: Delivers electrical insulation required for ANSI Z89.1-1997 Type 1 Class C, E, and G helmet specifications. Other performance standards these helmets meet include NFPA 1977, 1998 Edition; CAL-OSHA; and US-OSHA. Features goggle retainer clips and reflective strips. Accepts brim grip brackets for faceshield visors and screens.

Has an adjustable Nomex® chin strap, goggle clips, underbrim shade, and Velcro® hook fasteners. The date of manufacture is stamped into the bottom side of the brim of hats and caps.

DEP Contract No.: ADM631, Amendment No. 1, Exhibit B-1, Page 20 of 35

I. SNAKE BOOTS

1. DANNER PRONGHORN SNAKEBOOT

• VENDOR: Danner

• VENDOR STYLE: 45033

• DESIGN: FULL-GRAIN LEATHER & 1000 DENIER NYLON UPPER, GORE-TEX® (GTX), SPEED

LACE…