CM20077003 Synopsis Attachment 1.pdf

LTC Project CM20077003 Solicitation SPE7MX-20-R-0157 Synopsis Attachment 1 Product Item Description (PID), Packaging & Marking *** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

CLIN 0001: NSN: 2090-00-368-4795

LOCKER, MEDICAL (FIRST AID BOX)

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD025

NOTE: USE MIL-PRF-32038 IN LIEU OF MIL-F-902

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 80064 921575

REVISION NR F DTD 06/29/1965

PART PIECE NUMBER: S3702-921575

IAW REFERENCE SPEC NR MIL-PRF-32038A

REVISION NR A DTD 05/14/2009

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:E5 OPI:M

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

CLIN 0002: NSN: 2540-01-460-0898

COVER, FITTED, VEHICULAR BODY

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RA001

REFERENCE NUMBER:ZD064

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

MEDIUM TACTICAL VEHICLES.

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CQ042

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:RQ027

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12420289

REVISION NR F DTD 03/31/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12378482

REVISION NR F DTD 04/21/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420023

REVISION NR J DTD 08/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420276

REVISION NR B DTD 04/04/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420277

REVISION NR K DTD 11/06/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421693

REVISION NR C DTD 08/30/2013

IAW REFERENCE DRAWING NR 97403 13228E1631

REVISION NR K DTD 03/06/2006

IAW REFERENCE DRAWING NR 97403 13228E1633

REVISION NR K DTD 06/03/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420289

REVISION NR DTD 03/24/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420288

REVISION NR F DTD 03/31/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 ECP-0048

REVISION NR DTD 04/28/2020

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP: 001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

CLIN 0003: NSN: 2815-01-568-2207

BRAKE,ENGINE

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:ZD050

REFERENCE NUMBER:ZD054

REFERENCE NUMBER:ZD087

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS118

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12505546

REVISION NR A DTD 09/14/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12505546

REVISION NR DTD 10/24/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420325

REVISION NR H DTD 10/24/2012

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP: 001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

CLIN 0004: NSN: 3020-01-339-0564

SPROCKET WHEEL

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:ZDISO

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:CS118

IAW BASIC DRAWING NR 19207 12268562

REVISION NR C DTD 01/03/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369021

REVISION NR C DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12268562

REVISION NR DTD 02/12/2020

IAW REFERENCE QAP 19207 12268562

REVISION NR A DTD 02/14/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12268562

REVISION NR DTD 10/15/1991

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49

WRAP MAT:GB CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:H

UNIT CONT:EC OPI:A

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

CLIN 0005: NSN: 3040-00-891-1897

SHAFT, SHOULDERED

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ032

MICROSEAL 100-1 CAN BE OBTAINED FROM E/M

ENGINEERED COATING SOLUTIONS IN ATLANTA<(>,<)>

GA AT 888-233-4706.

USE MIL-STD-130. IMPRESSION STAMPING IS NOT

PERMITTED.

100% ACCEPTANCE TESTING IS REQUIRED TO ASSURE

THE SHEAR SECTION WAS NOT HARDENED OVER RC 42

AND THE SPLINES WERE HARDENED. THE METHOD TESTING

AND VERIFYING THE HARDNESS ON PRODUCTION ITEMS

IS BY USE OF A SUPERFICIAL HARDNESS TESTER USING

A 15 KG WEIGHT AND THE APPROPRIATE 15 T

SUPERFICIAL DIAL SCALE. THE HARDNESS READING

SHALL BE TAKEN APPROXIMATELY 1/8 INCH FROM THE

SHEAR GROOVE AND THE SPLINES MAY BE TESTED WITH

THE STANDARD WEIGHT AND DIAL SCALE ON THE FLATS

AT EACH END OF THE SPLINE SHAFT. THE CONTRACTOR

SHALL SUPPLY THE GOVERNMENT BUYER WITH A

CERTIFICATE THE ABOVE WAS COMPLIED WITH ON ALL

SHAFTS SUPPLIED ON THE CONTRACT.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 99551 2481789

REVISION NR N DTD

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 99551 PS-57

REVISION NR A DTD 09/14/1962

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP008911897

REVISION NR DTD 08/27/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98747 2481789-EDR

REVISION NR DTD 08/20/2012

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:02

WRAP MAT:GC CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A

UNIT CONT:D4 OPI:M

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

CLIN 0006: NSN: 4720-01-115-4990

HOSE ASSEMBLY, NONMETALLIC

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:ZD087

THE USE OF ZINC PLATED FITTINGS ARE ACCEPTABLE<(>,<)>

PROVIDED THEY MEET THE SALT SPRAY REQUIREMENTS

CITED IN MIL-DTL-13444.

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS147

SHELF LIFE MARKINGS REQUIRED PER 5.2.1 OF

MIL-STD-129: SHELF-LIFE MARKINGS SHALL BE SHOWN AS

PART OF THE ITEM IDENTIFICATION DATA ON UNIT PACKS<(>,<)>

INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND

UNPACKED ITEMS. SHELF-LIFE MARKINGS SHALL INCLUDE

THE MANUFACTURED, CURED, ASSEMBLED, OR PACKED DATE

(APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST

DATE, AS APPROPRIATE.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CDD01

REFERENCE NUMBER:CSC01

REFERENCE NUMBER:RS030

IAW BASIC DRAWING NR 19207 12298167

REVISION NR B DTD 03/24/1982

PART PIECE NUMBER: 12298167

IAW REFERENCE DRAWING NR 19207 12297003

REVISION NR J DTD 06/09/1994

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-13444J

REVISION NR J DTD 04/02/2019

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MS52103G

REVISION NR G DTD 04/02/2019

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(2)

REVISION NR R DTD 09/27/2019

PART PIECE NUMBER: TYPE I SHELF LIFE, 120 MONTHS

IAW REFERENCE DRAWING NR 19207 12298167

REVISION NR DTD 02/26/2016

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CQSLW

CLIN 0007: NSN: 4820-00-830-7977

VALVE, PLUG. MANUALLY OPERATED, 3-WAY, 2 POSITION, ROTARY SELECTOR,

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

HYDRAULIC.

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS118

REFERENCE NUMBER:CS187

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 10900445

REVISION NR E DTD 12/26/1990

LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:DA CUSH/DUNN THKNESS:D

UNIT CONT:EC OPI:O

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

CLIN 0008: NSN: 5930-01-502-3915

SWITCH, ROTARY. (MANUAL BATT DISCONN SW 12V/24V)

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS187

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12422807

REVISION NR A DTD 01/06/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12422807

REVISION NR DTD 03/13/2018

LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:0

UNIT CONT:DO OPI:M

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:ZD017

REFERENCE NUMBER:IP025

CLIN 0009: NSN: 5945-01-148-1654

RELAY, ELECTROMAGNETIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

This is an Altered item drawing and the Mil-Spec relay P/N MS24185-D1 shall be procured from a from a current QPL source at the time of award.

REFERENCE NUMBER:E0004

REFERENCE NUMBER:E0118

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

FAR CLAUSE 52.246-11 APPLIES. A QUALITY MANAGEMENT PROGRAM MEETING THE

REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008

(EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008;

OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008

(EXAMPLE SAE AS 9003) IS REQUIRED. MIL-I-45208 AND MIL-Q-9858 ARE

OBSOLETE AND NO LONGER CONSIDERED SUITABLE WHEN HIGHER LEVEL QUALITY IS

REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES

WHICH CITE THE ENTIRE INTERNATIONAL STANDARD ARE INTERPRETED AS

EXCLUSIONS TO THIS DOCUMENT.

DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

4.1 General requirements, [excluding reference to 1.2 and excluding NOTE 3 c)]

4.2.1 General, [excluding subparagraph a)]

4.2.2 Quality manual, [excluding subparagraph a)]

4.2.3 Control of documents

4.2.4 Control of records

5.1 Management commitment

5.3 Quality policy

6.2.2 Competence, training and awareness

6.4 Work environment

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to the product

7.2.2 Review of requirements related to the product

7.2.3 Customer communication

7.4.1 Purchasing process

7.4.3 Verification of purchased product

7.5.1 Control of production and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5 Preservation of product

7.6 Control of monitoring and measuring equipment

8.1 General, [excluding subparagraph b) and subparagraph c)]

8.2.2 Internal audit

8.2.4 Monitoring and measurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventive action

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12316808

REVISION NR E DTD 06/17/2008

PART PIECE NUMBER: 12316808

IAW REFERENCE SPEC NR MS24185N

REVISION NR N DTD 03/27/2017

PART PIECE NUMBER: MS24185-D1

IAW REFERENCE DRAWING NR 19207 12316808

REVISION NR DTD 12/20/2017

LINE ITEM 00009 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:ZD009

REFERENCE NUMBER:ZD009

CLIN 0010: NSN: 2540-01-330-6177

COVER,FITTED,VEHICULAR BODY

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ032

CONTRACTOR FAT APPLIES PER DWG 12340676; AND QAP 12340676.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CS251

REFERENCE NUMBER:ZD080

ENGINEERING EXCEPTION TO DWG/QAP 12340676:

RELATIVE HUMIDITY REQUIREMENT 55% +/- 5% NOT REQUIRED.

IAW BASIC DRAWING NR 19207 12340676

REVISION NR F DTD 02/28/2012

PART PIECE NUMBER: 12340676-11

IAW REFERENCE DRAWING NR 19207 12460231

REVISION NR DTD 09/01/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 24617 MK61.103A

REVISION NR DTD 06/01/1954

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12460355

REVISION NR A DTD 12/04/1998

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12256532

REVISION NR F DTD 06/27/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12256532

REVISION NR H DTD 07/17/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340203

REVISION NR B DTD 08/16/1993

IAW REFERENCE DRAWING NR 19207 12340205

REVISION NR A DTD 12/21/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340207

REVISION NR A DTD 12/20/1990

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12340676

REVISION NR C DTD 03/08/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12463286

REVISION NR B DTD 01/01/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340676-11

REVISION NR DTD 12/01/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340676-11

REVISION NR B DTD 09/26/1991

LINE ITEM 00010 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

ZZ shall be IAW SPI AK13306177.

CLIN 0011: NSN: 4720-01-460-0830

HOSE ASSEMBLY, NONMETALLIC

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:CA070

REFERENCE NUMBER:RS030

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD080

IAW BASIC DRAWING NR 01365 91013A0001

REVISION NR DTD 02/14/1994

PART PIECE NUMBER: 91013A0001-1

IAW REFERENCE DRAWING NR 01365 91013A0036

REVISION NR A DTD 06/13/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01365 91013A0028

REVISION NR DTD 02/15/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01365 91013A0029

REVISION NR DTD 02/15/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 01365 91013A1002

REVISION NR DTD 02/15/1994

LINE ITEM 00011 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:B

UNIT CONT:D3 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:32 -32 Type I, shelf life

REFERENCE NUMBER:CQSLW

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER CS118

FULL AND OPEN COMPETITION APPLIES.

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER ZD087

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER CDD01

DETAILED DRAWING (ONE ITEM)

REFERENCE NUMBER CSC01

SOURCE CONTROL DRAWING

REFERENCE NUMBER RS030

RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.

REFERENCE NUMBER CQSLW

REFERENCE NUMBER E0004

BID SET AVAILABLE.

REFERENCE NUMBER E0118

FULL AND OPEN COMPETITION APPLIES.

REFERENCE NUMBER ZD009

UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH

(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify

Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.1 of the standard.

(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org.

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RQ006

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

REFERENCE NUMBER CS251

IN LIEU OF A FIRST ARTICLE TEST INSTALLATION

UTILIZING A VEHICLE AS SPECIFIED IN THE

APPLICABLE TACOM QUALITY ASSURANCE REQUIREMENT,

THE CONTRACTOR MAY CONSTRUCT A FRAME ASSEMBLY

RIGID ENOUGH TO MAINTAIN THE LENGTH, WIDTH AND

HEIGHT I/A/W THE APPLICABLE TACOM DRAWING NUMBER

WHILE SUPPORTING THE COVER. THE CONTRACTOR MUST

PREPARE A DRAWING FOR THE FRAME ASSEMBLY AND

HAVE THE DRAWING APPROVED BY DCAMO PRIOR TO

UTILIZING THE FRAME ASSEMBLY FOR THE TEST

INSTALLATION AND/OR MANUFACTURE OF THE ITEM AND

WITHIN 90 DAYS OF THE CONTRACT AWARD. ACCEPTANCE

ON AN APPROVED FIXTURE OR VEHICLE SHALL NOT BE

GROUNDS FOR ACCEPTING UNITS THAT DO NOT MEET

OTHER CONTRACTUAL REQUIRMENTS.

REFERENCE NUMBER ZDISO

FAR CLAUSE 52.246-11 APPLIES. THE CONTRACTOR SHALL BE IN COMPLIANCE

WITH THE FULL REQUIREMENTS OF THE INTERNATIONAL ORGANIZATION FOR

STANDARDIZATION (ISO) 9001 STANDARD AT THE TIME OF CONTRACT ACCEPTANCE

OR CONTRACT MODIFICATION DATE.

1. The minimum Higher Level Contract Quality Requirements for manufacturers for DLA ISO 9001:2015. MIL-I-45208 and MIL-Q-9858 are obsolete and no longer acceptable when higher level quality is required.

2. Higher-Level Contract Quality Requirement for Non-Manufacturers. If a non-manufacturer is supplying the material, the non-manufacturer shall:

(i) Furnish items produced at a manufacturing facility conforming to the higher-level contract quality requirement for manufacturers as specified in paragraph 1; and

(ii) Maintain and provide documented evidence that material furnished under this contract was produced at a manufacturing facility conforming to the specified higher-level contract quality requirement and that the material meets all requirements. At a minimum, the documented evidence shall be sufficient to establish the identity of the product and its manufacturing source; and include the basic item description, the item(s) part number and/or national stock number, the item(s) manufacturing source , the manufacturing source#s commercial and government entity code (e.g. CAGE code), and clear identification of the name and location of supply chain intermediaries from the manufacturer to the direct source of the product for the offeror/contractor, to the item(s) acceptance by the Government. It should also include, where available, the manufacturer's batch identification for the part(s), such as date codes, lot codes, or serial numbers.

(iii) Maintain documentation of the Non-Manufacturers# quality assurance program; receiving/verification processes; records management system;

procurement system; inventory control system; testing results; and any other records associated with the material being provided.

(End of TQ Requirement)

REFERENCE NUMBER ZD064

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

REFERENCE NUMBER CQ042

THIS NSN REQUIRES GOVERNMENT SOURCE INSPECTION WITH A FIRST ARTICLE TEST REQUIREMENT.

THE GOVERNMENT SOURCE INSPECTION REQUIREMENT IS VALID WHETHER OR NOT THE FIRST

ARTICLE TEST REQUIREMENT IS INVOKED.

REFERENCE NUMBER RQ027

A. Data required by this document will be included in the price of the procured item(s).

B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP).

C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT.

D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). Instructions for entering Attachments can be found in the iRAPT - Web Based Training Main Menu under "Attachments which can be viewed at https://wawfraid.nit.disa.mil/wawfwbt/xhtml/unaut h/web/wbt/wawfra/Attachments.xhtml. If the supplier offering the material to the Government is not the manufacturer of the material, the supplier is responsible for obtaining a certified test report from the manufacturer, including it as part of this COQC, and for demonstrating that the specific material being offered under this Certificate is covered by the certified test report. The data submittal listed above is in addition to the other iRAPT requirements included in this contract. Whenever access to the iRAPT system is limited or not available, the supplier shall notify the PCO and request permission to submit documents manually until the iRAPT system is again available for use. Unless otherwise specified by the contract, the supplier shall be responsible for retaining the Certificate for a period of 4 years. When requested by the Contracting Officer, the supplier shall make the Certificate available for review by the Government at any time during the period the Certificate is required to be retained.

E. No Certificate of Conformance (COC) or alternate release is authorized.

End of Requirement

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER ZD017

In addition to MIL-STD-129 markings, each MRAP palletized shipment shall include two, 10 inch by 10 inch fluorescent yellow sticker/sign/placard with the letters MRAP in 2 inch bold black letters and applied to one side and one panel of palletized load. For better visibility, place the MRAP sticker/sign/placard on the outside of the multiwall container(s) or the pallet, not under any shrink-wrap. The stickers are to be placed high on each side of each container, so they are visible at eye level.

This sticker/sign/placard is required to expedite the receipt and inspection of these shipments. This requirement is only applicable for shipments directed to DDC depots and direct vendor deliveries to CCPs;

and does not apply to direct vendor deliveries to the customer.

ACCEPTABLE DEVIATIONS: Contractor is authorized to make adjustments to actual sticker size and font size when shipping containers are not large enough to adequately display all required MIL-STD-129 markings along with the standard size (as cited above).

OEM MRAP STICKERS: Each OEM has a designated background color in lieu of the standard yellow background MRAP sticker in an effort to apply Lean Six Sigma principles and concepts to packaging, storage, and transport of MRAP material to theater. The following are the official designations (background color # text required):

GREEN # MRAP BAE (TX)

TEAL # MRAP OSHKOSH

PURPLE # MRAP BAE (PA)

ORANGE # MRAP FPII

BLUE # MRAP NAVISTAR

PINK # MRAP GDLS

NOTE: If MRAP stickers are missing or OEM is exhausting yellow background stickers, no quality notification shall be submitted to Contract Administrating Activity.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER ZD003

A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

REFERENCE NUMBER ZD050

Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.

REFERENCE NUMBER ZD054

CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,

UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.