Minimum_Essential_Characteristics.docx

MINIMUM ESSENTIAL CHARACTERISTICS

High Density Linen Storage Unit

MOVABLE SHELVING

Guidance Rail – 1-piece forged guidance rail, direct installation to facility floor. Rail profile 4-1/4” wide x 3/8” tall with sloped lead and trailing edges to eliminate trip hazards. 2-1/4”x 1/4” anchoring, quantity and location based on manufacturers’ specification.

Carriage – Mechanical Assist control with ergonomic 3-spoke control handle on the face of all movable ranges. Continuous drive shaft drives all wheels on one side of the carriage; carriage capacity 15,000 pounds. Steel carriage construction with a safety recess to lock the carriage and shelving. Mechanical assist control to permit chain tension adjustment without the removing end panels or drive structure.

End Panels – All exposed range ends to be provided with high-pressure laminate end panels. Panels to be full height and width.

LINEN SHELVING

Shelving Construction – 4-post shelving type using no fasteners and allowing adjustment on 1-1/2” increments. All shelving to have closed uprights, back panels and closed tops. Adjustable shelves are 1-piece powder coat steel construction (18 ga.); shelf supports – 22 ga. construction. Note: backs are required on back-to-back shelving ranges.

Static shelving ranges to be floor mounted.

ACCESSORIES

Tambour Doors – light-weight aluminum roll-up door to protect stored materials. Non-locking, baked enamel finish.

Garment Rail – As required provide one garment rail per opening; ¾” schedule 40 steel shelving. Adjustable mounting bracket allows for relocation as needed.

Dust Seal – as required PVC dust seal provided along top edge of shelving and vertically at the front and rear of each range. Minimum 1-3/4” profile.